ESBD_483523_1768513415248_Solicitation Package 601290000033167.pdf

INSTRUCTIONS TO RESPONDENTS

USE OF NATIONAL INSTITUTE OF GOVERNMENTAL PURCHASING CODE

The Texas Department of Transportation (TxDOT) uses the National Institute of Governmental Purchasing, Inc., (NIGP) code to standardize purchases by conforming to the class, item, and group structure of the code. The NIGP code is used to select vendors for our master vendor file from the Texas Comptroller of Public Accounts (CPA) Centralized Master Bidders List (CMBL).

New suppliers and other vendors wishing to furnish materials, equipment, supplies and services to TxDOT should apply to be on the CMBL to receive bidding opportunities.

Existing TxDOT vendors need only be concerned that the information listed on the CMBL file is correct, and that the applicable NIGP class and item are selected for those you can provide.

CMBL information is available online at: https://comptroller.texas.gov/purchasing/vendor/cmbl/ or by phoning 1-512-463-3459.

Early Payment Program - TxDOT is offering an important program to all respondents that provide prioritized invoice processing and payments (prior to the 30th day after receipt of a correct invoice). The program provides enrolled vendors enhanced benefits from improved invoice processing to priority handling to cash advancement and technology efficiencies.

Respondents offering a cash discount in exchange for TxDOT’s priority invoice processing and early payment agreement should complete and return the attached form entitled “Priority Invoice and Early Payment Program” with the response.

Additional information may be found at the following website: http://www.txdot.gov/business/vendors/epp.html

Revised 20

601290000033167

01/20/2026 3:00 PM

Taylor.Blevins@txdot.gov

Taylor.Blevins@txdot.gov

Taylor.Blevins@txdot.gov Taylor.Blevins@txdot.gov

SHIP TO THE FOLLOWING LOCATION

UNLESS OTHERWISE NOTED

SEE SPECIFIC INSTRUCTIONS FOR

EACH LINE ITEM.

United States

SEE SPECIFIC INSTRUCTIONS FOR

EACH LINE ITEM

1 500.00 EA 80130521224

POSTS, SIGN, FIBERGLASS REINFORCED.12

FEET BY 3 INCH DIAMETER, UPRIGHT,GRAY,

WITH PLUG, RECYCLABLE

SHIP THIS ITEM TO THE FOLLOWING LOCATION

SEGUIN REGIONAL SUPPLY CENTER

2024 HWY 46 NORTH

SEGUIN TX 78155-2206

United States

*Must be in accordance with Specification DMS-4410 and attachment A*

Example: Make: Texas Corrugators Model: FRP12 or TxDOT approved equal

Respondent must be an official authorized dealer or authorized distributor of the products being solicited.

Respondent will be required to submit documentation and proof that they are an authorized dealer or distributor within 2 days of the request from TxDOT.

Respondent must indicate below the make and model of the item bid.

Make: ________________________

Page 1INVITATION FOR BID 01/15/2026

SOLICITATION NO: 601290000033167

OPENING DATE 03:00 PM Jan 20, 2026 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

Item Item Quantity Unit Make/ Unit Extended No. Description Model Price Price

IF RESPONDING, FORM MUST BE SIGNED. IF NOT RESPONDING. DO NOT RETURN THIS FORM.

Failure to sign will disqualify response.

Authorized Signature Date

Printed Name

By signing solicitation, respondent certifies that if the Texas address is shown as the address of the respondent, respondent qualifies as a Texas Bidder as defined in 34 T AC Rule 20.306

Model: ________________________

The following comments apply to the entire Solicitation

1. Description of Goods: This solicitation is to establish a contract for sign posts for Seguin Regional Distribution Center.

2. Emergency:

This solicitation is for an emergency purchase made under Texas Government Code, §2155.137 and 34 TAC 20.82.

3. Electronic State Business Daily (ESBD): This solicitation is posted on the ESBD.

It is the responsibility of the respondents to check the ESBD for addenda or additional information related to the solicitation. Vendors active on the CMBL at the time the solicitation was posted will receive notifications regarding addenda or additional information related to the solicitation.

http://www.txsmartbuy.com/esbd

4. Order of Precedence: In the event of any conflict, terms contained in the document shall prevail in the order as listed below:

4.1. Solicitation No. 601290000033167

4.2. Specification DMS-4410 dated

September 2007

4.3. TxDOT Terms and Conditions, August

4.3.1. Payment will be made in

accordance with Part 4, Para. 4.04 (b)

5. The Vendor shall promptly notify TxDOT of all matters relating to any Federal tax on imported goods that reasonably may be expected to result in either an increase or decrease in the contract price and shall take appropriate action as TxDOT directs

6. Estimated Quantities Quantities are estimates only to be used for the purpose of comparing responses.

The respondent must enter their unit

Page 2INVITATION FOR BID 01/15/2026

SOLICITATION NO: 601290000033167

OPENING DATE 03:00 PM Jan 20, 2026 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

Item Item Quantity Unit Make/ Unit Extended No. Description Model Price Price price on Solicitation. Total price will be evaluated by multiplying the unit price for each line by the estimated quantities listed on Solicitation.

TxDOT will order only the amount needed to satisfy operating requirements; no guarantee of any minimum or maximum purchase is made or implied. Total amount ordered must not exceed the aggregate contract amount unless additional funds are allocated, and the total contract amount is increased in accordance with the terms and conditions.

7. Acceptance Inspection:

All items ordered will be subject to acceptance inspection and performance testing upon receipt. Acceptance inspection and performance testing will not take more than thirty working days, weather permitting.

Vendor will be notified within this time frame of any units not delivered in full compliance with the contract specifications. If any units are canceled for nonacceptance, the needed equipment may be purchased elsewhere and vendor may be charged any additional increase in cost and handling.

8. Delivery:

Delivery must be made between 8 AM and 4 PM Monday through Thursday except on regularly observed state or federal holidays, unless prior approval has been obtained from TxDOT.

9. Contact Information:

The individuals listed below are the only authorized TxDOT contacts.

Contacting any other TxDOT personnel regarding this solicitation, may result in the respondent being disqualified.

Any changes as a result of questions will be made by TxDOT in the form of an addendum to the solicitation; no oral changes will be considered.

For clarification or questions regarding this solicitation, respondents may contact:

Primary Contact: Taylor Blevins, CTCD Phone: 903-737-9293

Page 3INVITATION FOR BID 01/15/2026

SOLICITATION NO: 601290000033167

OPENING DATE 03:00 PM Jan 20, 2026 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

Email: Taylor.Blevins@txdot.gov

Secondary Contact: Leigh Wilson, CTCD Phone: 903-510-9276 Email: Leigh.Wilson@txdot.gov

10. Vendor Performance: TxDOT will monitor performance on a regular basis.

10.1. TxDOT may consider the following

performance by the vendor as unsatisfactory performance - An unsatisfactory performance determination includes, but is not limited to:

10.1.1. Failure to deliver any portion

of the work product.

10.1.2. Failure to deliver a useable

work product during the term of the contract

10.1.3. Unsatisfactory performance of

any service requirements in the contract

10.2. Exceptional performance

determination includes, but is not limited to:

10.2.1. Deliverables made early upon

TxDOT member request.

10.2.2. Vendor commended for exceptional

customer service

10.2.3. Exceptional service provided

11. Packaging Requirements:

All cardboard boxes must be labeled, listing the manufacturer's name, part number, description, quantity, and box weight.

All cardboard boxes must be suitable in bursting strength to allow for the weight of the contents and to allow for the stacking of the boxes a maximum of four high on a pallet for shipping and storage.

Packaging other than specified herein is acceptable only with the prior written approval of TxDOT’s designated TxDOT representative.

12. Response Submission:

12.1. GENERAL FORMAT: The respondent

must submit one signed and dated response to include the documentation required per response paragraph 12.3 to the email address as indicated on the “Instructions to Respondents” page.

12.2. The respondent shall not encrypt

Page 4INVITATION FOR BID 01/15/2026

SOLICITATION NO: 601290000033167

OPENING DATE 03:00 PM Jan 20, 2026 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

or password protect response or embed documents within the response; each section must be its own separate document.

12.3. RESPONSE: Failure by the

respondent to submit the documentation listed below will result in the response being considered non-responsive. The response submission must be submitted with each section named with the “Section #” and brief description not to exceed 30 total characters as a separate document in the following format:

12.3.1. Section 1 – Signed Invitation

for Bid

12.3.2. Section 2 – Vendor Data Schedule

12.3.3. Section 3 – Texas Family Code

Schedule

12.3.4. Section 4 – Addenda (if

applicable)

13. Vendor Point of Contact:

Name:

Phone:

Email:

14. Vendor Verification of Federal Employer Identification Number:

Vendor to provide current company name:

Vendor to provide federal EIN:

If invoice will be submitted by, and/or payment made to an EIN or company name different from the vendor on the contract, vendor must complete the following to authorize payment:

EIN of company authorized to invoice for vendor:

Name of Invoicing Company:

EIN of company authorized to receive payment:

Name of company to be paid:

15. Preferences Check below if preference claimed under rule 34TAC 20.306.

Tie-Bid Preferences:

_Supplies, materials or equipment produced in Texas or offered by a Texas bidder.

_Agricultural products produced or grown in Texas.

_Agricultural products and services offered by Texas bidder.

_USA produced supplies, material or

Page 5INVITATION FOR BID 01/15/2026

SOLICITATION NO: 601290000033167

OPENING DATE 03:00 PM Jan 20, 2026 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

equipment.

_Products produced at facilities located on formerly contaminated property _Products and services from economically depressed or blighted areas.

_Goods produced or offered by a Texas bidder that is owned by a service disabled veteran who is a Texas resident.

Source Preferences:

_Products of persons with mental or physical disabilities _Vendors that meet or exceed air quality standards. For contracts to be performed, in whole or in part, in a designated non-attainment area or an affected county, as those terms are defined by Health and Safety Code

386.001 Texas emission reduction plan

_Manufacturer that has a recycle program for computer equipment _Contractor providing foods of higher nutritional value Specification Preferences:

_Point lines made of recycled materials, remanufactured, or environmentally sensitive materials including recycled steel _Energy efficient products _Rubberized asphalt paving materials _Recycled motor oil and lubricants

If the name of your company is not printed on the heading of this solicitation, you must write the full name of company, full name of signer, mailing address, and respondent's employer identification number (EIN) on the face of the solicitation. To minimize identity theft, every company must have an employer Identification number (EIN), also known as a federal tax identification number, prior to award of a contract.

For information on obtaining your EIN, call 800-829-4933 or visit the following website:

https://www.irs.gov/businesses/small-bus inesses-self-employed/employer-idnumbers

(NOTE: this link will not work if capitalization is used. Type in navigation bar using lower case letters)

Page 6INVITATION FOR BID 01/15/2026

SOLICITATION NO: 601290000033167

OPENING DATE 03:00 PM Jan 20, 2026 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

16. Calendar of Events Estimated Solicitation Posting Date:

01/15/2026

Response Due Date 01/20/2026, 3:00 p.m.

central time

Tentative Date for Contract Award:

02/06/2026

Page 7INVITATION FOR BID 01/15/2026

SOLICITATION NO: 601290000033167

OPENING DATE 03:00 PM Jan 20, 2026 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

DEPARTMENTAL MATERIALS SPECIFICATION FIBERGLASS REINFORCED PLASTIC SIGN SUPPORTS

DMS - 4410

FIBERGLASS REINFORCED PLASTIC SIGN SUPPORTS

EFFECTIVE DATE: SEPTEMBER 2007

4410.1. Descizption. This Specification govems for the material, composition, quality, sampling, and testing and prequalification procedures of fiberglass reinforced plastic sign supports.

4410.2. Units of Measurements. The values given in parentheses (if provided) are not standard and may not be exact mathematical conversions. Use each system of units separately. Combining values from the two systems may result in nonconformance with the standard.

4410.3. Mateizal Producer List. The Traffic Engineering Section of the Traffic Operations

Division (TRF/TE) maintains the Material Producer List (MPL) of all materials conforming to the requirements of this Specification. Materials appearing on the MPL, entitled "Work Zone

Traffic Control Devices," require no further testing, unless deemed necessary by the Project

Engineer or CST/M&P.

4410.4. Bidders' and Suppliers' Requirements. Before any material is considered, it must be pre-qualified by the Materials and Pavements Section of the Construction Division (CST/M&P).

4410.5. Pre-Qualification Procedure.

A. Pre-Qualification Request. Submit a written request for evaluation under DMS-4410 to the Texas Department of Transportation, Traffic Operations Division (TRF), 125 East

1 lth Street, Austin, Texas 78701-2483.

Submit test reports with the request documenting formal crash tests in accordance with

National Cooperative Highway Research Program (NCHRP) 230 and meeting the requirements of the latest specifications on breakaway sign supports including the 1985

American Association of State Highway and Transportation Officials (AASHTO)

Standard Specifications for Structural Supports for Highway Signs, Luminar•ies, and

Traffic Signals.

B. Pre-Qualification Sample. Submit five randomly selected posts that are representative of normal production to the Texas Department of Transportation, Construction Division, Materials & Pavements Section, 9500 Lake Creek Parkway, (CP51), Austin, Texas 78717.

Tex-729-I describes the sampling procedure.

Submit all materials for pre-qualification tests at no cost to the Department.

The Department reserves the right to perform any or all of the tests specified as a check of the tests reported by the manufacturer. In the case of any variance, the Department's tests will govem.

TEXAS DEPARTMENT OF TRANSPORTATION 1— 4 LAST REVIEWED: OCTOBER 2014

C. Evaluation. CST/M&P will notify prospective bidders and suppliers after completion of material evaluation.

1. Qualification. If approved for use by the Department, the material will be added to the

MPL. If material is listed on the MPL, no additional submittals are required for that product.

Report changes in the composition or in the manufacturing process of any material to

CST/M&P. Significant changes reported by the manufacturer, as determined by the

Director of CST/M&P, may require a re-evaluation of performance.

When, in the opinion of the Director of CST/M&P, changes have been made in the composition or in the manufacturing process of a prequalified material, a re-evaluation of the performance may be required. The Department may conduct additional tests to identify changes in the material. Detected changes in the composition or in the manufacturing process that have not been reported by the manufacturer may be cause for removal of that material from the MPL.

2. Failure. Producers not qualified under this Specification may not fumish materials for

Department projects and must show evidence of correction of all deficiencies before reconsideration for qualification.

The Department normally bears the costs of sampling and testing; however, the producer will bear the costs associated with materials failing to conform to the requirements of this Specification. The Director of CST/M&P will assess this cost at the time of testing.

Amounts due the Department will be deducted from monthly or final estimates on contracts, from partial or final payments on direct purchases by the State, or directly billed to the producer. Products will not be retested until costs for previously failed tests have been paid.

D. Perfoimance Histoiy. Some of the tests specified may extend over a prolonged period.

Therefore, testing for acceptance of materials supplied on any contract or State purchase order will only be considered on those materials that are determined by the Director of

CST/M&P, to be identifiable as a material having an established performance history of compliance with the criteria specified.

E. Peizodic Evaluation. The Department reserves the right to evaluate the performance of materials periodically. Samples will be selected at random from materials submitted to the

Department on contracts or on direct State purchase orders.

An authorized Department representative will do the sampling. Random samples will be taken so that the samples can reasonably be considered representative of all materials being supplied. A sample will consist of a minimum of three posts from each lot or shipment. Unless otherwise noted, the Department will sample at the jobsite.

Failure of materials to comply with the requirements specified may be cause for removal of those materials from the list of pre-qualified materials.

TEXAS DEPARTMENT OF TRANSPORTATION 2— 4 LAST REVIEWED: OCTOBER 2014

4410.6. Mateizal Requirements. This Specification covers the requirements for fiberglass reinforced plastic sign supports (referred to as 'supports').

A. Dimensions. The outside diameter of the supports must be 75 ± 1 mm (3 ± 0.025 in.) The length of the supports must be as specified on the plans or on the purchase order. The supports must meet the applicable tolerances specified in ASTM D 3917.

B. Glass Content. The total percent glass of the supports, in accordance with ASTM D 2584, must not differ more than 5% from the average total percent glass of the pre-qualification samples.

The total percent glass of the individual pre-qualification samples must not vary more than

5% from their (minimum of five supports tested) average.

C. Hardness. The hardness of the supports, in accordance with ASTM D 2240, Type D, must not vary more than ±6 from the pre-qualification average. ASTM D 2240 is modified to allow for use of a specimen that is not flat.

The variation among individual pre-qualification samples must not vary more than six from their (minimum of five supports tested) averages.

D. Color. The color of the supports must be yellow and must fall within the CIE color coordinates and reflectance values listed below, both before and after 2,000 hours of exposure in accordance with ASTM G 155, using Exposure Cycle 1 with a quartz inner filter glass and Type "S" Borosilicate outer filter glass.

Color must be determined in accordance with Tex-839-B, which is modified to allow the use of a sample that is not completely flat to allow for the curvature of the support samples.

Table 1

CIE Color Coordinates and Reflectance

CIE Color Coordinates x y

Reflectance

0.440 0.460 30-60

0.490 0.510

0.540 0.460

0.490 0.410

E. Tensile Strength. The average tensile strength of each support tested, determined in accordance with ASTM F 711, must not vary more than 103 MPa (15,000 lb. psi) from the average of the supports tested for prequalification. ASTM F 711 is modified to allow the use of the slightly curved tensile coupons placed directly in the grips.

Test a minimum of five samples for each support.

F. Apparent Tensile Strength. The apparent tensile strength of each support tested, determined in accordance with ASTM D 2290, must not vary more than 25% from the apparent tensile strength of the pre-qualification samples. ASTM D 2290 is modified to allow the use of samples of uniform 12.7 mm (1/2 in.) width.

TEXAS DEPARTMENT OF TRANSPORTATION 3— 4 LAST REVIEWED: OCTOBER 2014

Test a minimum of five samples for each support.

G. Chemical Analysis. The infrared spectrum of material from supports fumished must match the spectrum for the pre-qualified supports. (Refer to Tex-888-B.)

H. Density. The specific gravity of material from supports fumished must not vary more than

± 0.12 from the specific gravity of the pre-qualified supports tested in a gas pycnometer using helium as the pressure gas. The pycnometer will be operated according to the manufacturer's procedure.

I. Workmanship. The supports must exhibit good workmanship and must be free from objectionable marks or defects that will adversely affect appearance or serviceability.

4410.7. Payment.

A. Procurement by the State. Payment for all materials will be in accordance with the conditions prescribed in the contract awarded by the State.

B. Contracts. Payment for all materials will be in accordance with the bid item in the contract, or as otherwise shown on the plans.

4410.8. Archived Versions. Archived versions are available.

TEXAS DEPARTMENT OF TRANSPORTATION 4— 4 LAST REVIEWED: OCTOBER 2014

Un ver sa I AncGior System w i th F i berg I ass Re i nforce P Iast i c (FRP) Post

3" 0.

Fiber Reinf Plas+

IFRP1

Class Cancre

S+ub pr

NOn-reinforgea Concre+e Foo+iry Isnoll De usetl unless noted elsewhere in thr plansi. Faundotl should iake appp

2.0 of of ccnor:

Frietion Ca or Plug. Se oeto i I on Sl.ov 1SIip-2f

H— 12 Dia _____.w]

6' min

+o edge or join+

A I Ì O t A

~ Y•

• 5iti~ ' . • s ., .

5/8" diaoeter Concreie ancnor - 4 ploces lembed a nin. of 3 3/B' ond +orque +o min, 0f 50 f+-IObI. Ancnor moy be exponsian or odhesive fype.

Cancrete onehor consists of 5/B' diome+er s+ud bolt with UNC series bolt +hreads on +itie upper end. A heovy hex rx,+ per A5Ti1 A563 O':d hordened washer per A5T41 F43$. The st.~d bolt shall have minimum yield and ultimate tensile sfrenqtns of 50 ona 75 Ks1, respeotively. Nvts, Dolts ma .ast=rs shol l be qolvonized per Item 445, 'C~alvanizing.' Toa oi oolt snoll exteno ot leost flush with top of nut wnen Insirolled. The anchor, when instolled in 4000 psi normol-weigh+ eancre+e wi+h o 3 3/8" minimm e+roeomen+, shall nove o minimum allowable +ension ond shco- of 2450 ond 1525 psi, respec+ively.

Adnesive type Olchors sh011 have stua b01ts installed ritn Type III epoxy per OABS-6100, 'Epoxies ond Adhesives."

Adhesive onahOrs moy be loadea Ofter ade4uat9 epoxy cure tine per the mqnufqc+tire - -; r'eco-n-,:-iCO+iqnB.

BOLT-DOWN DETAILS

I ~ I

I ~ I 1/-0 x 2 7/8" I sl ofi3 (4 I equolly

I I spaaed} I I

I I

.L.. 3 1/2" 5eheO.ile 40 Stub Pipe S3 Nanlnol)

1f? x 7 1/2" Steel Roo Ac+s as o's+op" for +he sign post and prevents stub from +urnin0 rn +he foindo+ion.

Compression Rinp

Fiqergloss Reinforced PlOstia 4FRP1 Pipe

3 1/2' Scneaule m0 Slub Pipe 13" NOmin0ll

View A—A

O

Goupler

Pipe S+ub 3/9 OiO.

~ w. Base

O O :, i;? , PlcrFe

I , 1Q~~ Vt' 1 .... `:

T SN RD SGN 0550 TY FRPiX1UAlP1 551 RD SGH ASSM Tr FRatxlu6tP!

CENFAAL NOTES:

1, FRP si{p, supporfs for q single type siqc support moy be used for siyns up to ond lnmluairig 16 square feet. Dual post instollatian may be usea for siqns up to qnd including 32 souore feet, 2, AII ruts, bolts and washers shall be qalvanized per [tem 445, "GalvanixinQ," 3, See the Troffic Operotlons oivision website for detoiled drvwings of sign clonps. The we®si+e dddre55 is:

h}tp://wavr.txdot•goy/puDliCotions/troffic.htro

FRP POST pEOUIREuENTS

I. YAoteriols shqll tanfOrm ta thQ reVqirements Qf Deportmental Alqteriol SpeCifiootian p►f5-4410 drxl will be furnished in o yellow or qroy oolor os specified elsewhere in the plans.

2 Thiakness of FRP sign supoar+ is 0.125" + 0.031", - 0.0"• 3, FRP sign suppor+s ore prequalified by ttbe Troffic Operatians Division.

Prequolification praCedures ore ob+ained by writin¢:

Texas Bepartment of Tronspartation Traffic Opera+ions Division 125 Eost Ilth Street lws+in, Texos 787D1-2483

UHIYERSAL dN[HCtR SySTEAR INSTALLATION PROCEDURES

I, Di0 foundotion nole. Ahere salid rock is encoun+ered ot qround level, +ne founUOticn s'loli De o minimJn aeptn of 18, wftten solia roCk is encounterea belOw Oround level, +he foundo+ian snall extend in tire solid roak o minie.ie depRn af 18" or prOviee O minimujr f0•fidotion 9e01i1 of 3g'. If solid ro4k Is encoun+eru*a, +ne sacks+l'b+ub Itr&y bc reduCad in lan0+n as reouired +d o minimun leno+h of 18". Any mo+er'ol removoa fram +ne socket/siuU sholl be trom the bot+om ona the ciaorance requireme4r+s piven on 511DIGENJ mus+ be followed. The i mer surfoces of the socke+/s+uD must remoin free of oonere+e Or Oiilsr debriS.

2, Tne Engineer may permi+ Dotcnes of concrete less tnon 2 cuaic yar9s to De mixed vi+h o por+able, mator drivan concra•te mixer. For Sanall ploceman+s less +nan 0,5 oupiC yoras, nana mlxing 1n o su1+aDle corrtoiner moy oe ollowea by Engineer. Cancrete sholl be Class A.

3, Insert Dose pos+ in foc.naotion nole to aep+ns shown orw fill nole wi+n ooncre+e. Cu+ bose pos+ fram bo++am and ensure a minicn,,m of 18" erroedmen+ 1f instollero in solio rock.

A. Level Cnd pluab +he base pos+ ■ith coupler usin0 o+a•oedo level dnd le+ ooncrete aet o minirn.m of 4 aoys, unless a+nerwise direc+ea ioy Engineer.

Ba++ah of base pos+ slo+s sndll be above +ne concre+e foo+ino.

5, Attoah siqn +o FRP pos+.

6. Inser+ sipe Dos+ in+0 base post. Lower un+il +he pOs+ cOmes +0 res+ an +he steel roo, 1• use normer +o ensure +he Coupler is firmly sea+ea. Top of coupler enoula be level wi+h +op of oase pos+ in mos+ Insioncas.

S. Cneck sign to ensure there is no iwisl. If loose. inareose 1he tipntenin0 of earpler.

BOLT OOMw SCCN SIetPORT

1, PositiCn bo5e plote wiih coupler on existing Concrote.

2. Crill noles into concrete ana rnsert ine 5/8" diameter balts rith wedqe anCnors, on0 tii'iten nui•s.

3. AttOcn 5ipe 15 FRP post.

A. Insert bottcm of sign post into pipe stub.

5. Use hameer to ensure the coupler is firmly sealea. Top of coupler shoula be

12vel vith top of base post in most inslon0es,

6. Cneck siqn to ensure there is no twisl. If loose, increose lhe tiqhteninq of ocupler.

Attachment A Solicitation No. 601290000033167

SOLICITATION No.

601290000033167 VENDOR DATA

SCHEDULE

Respondent Name: _________________________________________

Manufacturer: _______________________ Part Number: ___________________________

Authorized Dealer or Distributor: (YES/NO): ______________

Authorized Representative Name Authorized Representative Signature Date

FAILURE TO PROVIDE COMPLETED VENDOR DATA SCHEDULE WITH THE RESPONSE WILL

RESULT IN THE RESPONSE BEING CONSIDERED NON-RESPONSIVE.

1 - 1

Revised: 12/22/25

1 - 1

TEXAS FAMILY CODE SCHEDULE

SOLICITATION NO. 601290000033167

Ineligibility to Receive State Grants or Loans or Receive Payment on State Contracts Respondent shall fill out the appropriate information, sign and return the schedule.

Under Family Code §231.006, relating to child support obligations, Respondent certifies that the individual or business entity named in this solicitation are eligible to receive the specified payment and acknowledge that this contract may be terminated and payment withheld if this certification is inaccurate. Any response submitted under this solicitation shall contain the names and social security numbers of person or entity holding at least a twenty-five percent ownership interest in the business entity submitting the response.

Respondents meeting the ownership must complete the following:

XXX-XX-

Name Social Security Number

XXX-XX-

Name Social Security Number

XXX-XX

Name Social Security Number

If respondent does not meet the ownership criteria under Texas Family code - Section 231.006, check the box below, sign and return the schedule.

This Schedule is not applicable

FEDERAL PRIVACY ACT NOTICE: This notice is given pursuant to the Federal Privacy Act. Disclosure of your Social Security (SSN) is required under Section 231.006(c) and Section 231.302(c)(2) of the Texas Family Code. The SSN will be used to identify persons that may owe child support. The SSN will be kept confidential to the fullest extent allowed under Section 231.302(e), Texas Family Code.

Signature

Title

THIS PAGE MUST BE RETURNED WITH THE RESPONSE. FAILURE TO SIGN AND RETURN THIS

PAGE MAY RESULT IN THE RESPONSE BEING CONSIDERED NON-RESPONSIVE.

Revised August 2025 i

TEXAS DEPARTMENT OF TRANSPORTATION

TERMS AND CONDITIONS

TABLE OF CONTENTS

PART 1. INTRODUCTION

1.01 GENERAL

1.02 STATUTORY AUTHORITY

1.03 TITLE VI ASSURANCE

1.04 ENVIRONMENTAL IMPACT

1.05 COMPLIANCE WITH LAWS

PART 2. GENERAL INSTRUCTIONS

2.01 SPECIFICATIONS

2.02 RESPONSE SUBMISSIONS

2.03 PRICING

2.04 ADA CONSIDERATIONS AND NOTIFICATION

2.05 RESPONSE OPENINGS AND DISCLOSURE OF INFORMATION

2.06 ALTERATIONS OR WITHDRAWAL OF RESPONSES

2.07 DETERMINING AWARD

2.08 PREFERENCES

2.09 DELIVERY

2.10 INSPECTIONS AND TESTS

2.11 VENDOR PERFORMANCE

PART 3. RESPONDENT AFFIRMATIONS

3.01 FALSE STATEMENTS

3.02 REPRESENTATIONS, WARRANTIES, AND COVENANTS

3.03 GRATUITIES

3.04 CERTAIN BIDS AND CONTRACTS PROHIBITED

3.05 ANTITRUST LAWS

3.06 DECEPTIVE TRADE PRACTICES; UNFAIR BUSINESS PRACTICES

3.07 COLLUSION

3.08 INELIGIBILITY UNDER FAMILY CODE

3.09 CONTRACTING WITH EX-TXDOT EXECUTIVE DIRECTOR

3.10 DEBT TO THE STATE

3.11 RESPONDENT ELIGIBILITY

3.12 NEPOTISM DISCLOSURE

3.13 BOYCOTTING ISRAEL

3.14 DISCLOSURE OF RESTRICTED EMPLOYMENT

3.15 ANTI-TERRORISM OR TERRORIST ORGANIZATION PROHIBITED

3.16 CONTRACTING INFORMATION RESPONSIBILITIES

3.17 HUMAN TRAFFICKING PROHIBITION

3.18 NO CONFLICTS OF INTEREST

3.19 COVID VACCINE PASSPORTS

3.20 FIREARM AND AMMUNITION DISCRIMINATION

3.21 LONE STAR INFRASTRUCTURE PROTECTION ACT

3.22 BOYCOTTING ENERGY COMPANIES

3.23 FOREIGN ADVERSARIES

PART 4. GENERAL TERMS AND CONDITIONS

4.01 CONTRACTS

4.02 FUNDING

4.03 INVOICING

4.04 PAYMENT

ii

4.05 INTELLECTUAL PROPERTY

4.06 ELECTRONIC AND INFORMATION RESOURCES ACCESSIBILITY STANDARDS

4.07 CYBER SECURITY TRAINING

4.08 SITE VISITS

4.09 NON-WAIVER OF RIGHTS

4.10 LIMITATION ON AUTHORITY; NO OTHER OBLIGATIONS

4.11 VENUE AND JURISDICTION; APPLICABLE LAW

4.12 VENDOR ASSIGNMENTS

4.13 FORCE MAJEURE

4.14 RIGHT TO AUDIT

4.15 INDEMNIFICATION

4.16 DAMAGE TO TXDOT PROPERTY

4.17 PUBLIC INFORMATION ACT AND CONFIDENTIALITY

4.18 BUY TEXAS

4.19 COMPETENCE OF VENDOR

4.20 CORRECTIONS TO WORK

4.21 IT SERVICE CONTRACTS SECURITY

4.22 NOTICES

4.23 PUBLIC DISCLOSURE

4.24 DISASTER RECOVERY PLAN

PART 5. INSURANCE

5.01 PRIOR TO CONTRACT AWARD

5.02 DURING TERM OF CONTRACT

5.03 WAIVER OF SUBROGATION ENDORSEMENT

5.04 WORKERS’ COMPENSATION INSURANCE

5.05 WORKERS’ COMPENSATION INSURANCE FOR BUILDING AND CONSTRUCTION

SERVICES

5.06 COMMERCIAL GENERAL LIABILITY INSURANCE

5.07 COMMERCIAL AUTOMOBILE POLICY

PART 6. VENDOR PERSONNEL MANAGEMENT

6.01 INDEPENDENT CONTRACTOR

6.02 ALCOHOL, DRUG, AND SMOKE-FREE WORKPLACE ... ERROR! BOOKMARK NOT DEFINED.

6.03 REPLACEMENT OF PERSONNEL

6.04 LABOR/MATERIAL/EQUIPMENT

6.05 ENGLISH-SPEAKING STAFF

6.06 FELONY CRIMINAL CONVICTIONS

6.07 SUBCONTRACTING REQUIREMENTS

6.08 PAYMENT OF SUBCONTRACTORS

6.09 VENDOR TITLE VI AFFIRMATIONS

6.10 E-VERIFY

PART 7. DISPUTE RESOLUTION

7.01 DISPUTE RESOLUTION

PART 8. CONTRACT TERMS

8.01 TERM OF CONTRACT

8.02 ORDER OF PRECEDENCE

8.03 TERMINATION OF A CONTRACT

8.04 REMEDIES

8.05 SALE OR ASSIGNMENT

8.06 RENEWAL OF CONTRACT

8.07 EXTENSION OF CONTRACTS

8.08 SEVERABILITY CLAUSE

8.09 AMENDING THE CONTRACT

iii

8.10 THIRD-PARTY BENEFICIARIES

8.11 BINDING EFFECT AND SURVIVAL OF OBLIGATIONS

APPENDIX A

1 – 24

TEXAS DEPARTMENT OF TRANSPORTATION

TERMS AND CONDITIONS

PART 1. INTRODUCTION

1.01 GENERAL: These Terms and Conditions apply to the solicitation for goods and/or services [whether a Request for Quote (RFQ), Invitation for Bid (IFB), Request for Offer (RFO) or Request for Proposal (RFP)] offered by the Texas Department of Transportation (TxDOT) (“solicitation”) and any contract issued by TxDOT resulting from the solicitation (“purchase order” or “contract”). The term “response” or “bid” means the proposal, quote, bid, or offer made to TxDOT in response to the solicitation. The term “respondent” or “bidder” means the party who submits the response to the solicitation, including the vendor. The term “vendor” or “contractor” means the party listed as vendor in the contract. Any reference to time in the solicitation or contract shall mean central time.

1.02 STATUTORY AUTHORITY: The solicitation and contract are authorized by Government Code Title 10, Subtitle D (the “Purchasing Act”). The solicitation and contract are subject to all applicable requirements of the Purchasing Act [in particular, Government Code Chapter 2151 (General Provisions), Chapter 2155 (Purchasing: General Rules and Procedures), Chapter 2157 (Purchasing: Purchase of Automated Information Systems), and Chapter 2161 (Historically Underutilized Businesses, “HUBs”)] and those requirements established by rule of the Texas Comptroller of Public Accounts (CPA), Statewide Procurement Division (SPD), as contained in Title 34, Chapter 20, of the Texas Administrative Code (“TAC”), and to other applicable federal and state statutes and rules herein cited. Any references in this contract to the “Government Code” mean the Texas Government Code.

1.03 TITLE VI ASSURANCE: TxDOT, in accordance with the provisions of Title VI of the Civil Rights Act of 1964 (78 Stat. 252, 42 U.S.C. §§ 2000d to 2000d-4) and 49 C.F.R. Part 21 and 28 CFR §50.3 (for purposes of this section and §6.10 only, the “Acts” and the “Regulations,” respectively), hereby notifies all bidders that it will affirmatively ensure that in any contract entered into pursuant to this advertisement, disadvantaged business enterprises will be afforded full and fair opportunity to submit bids in response to this invitation and will not be discriminated against on the grounds of race, color, or national origin in consideration for an award.

Nondiscrimination programs require that federal-aid recipients, sub-recipients, and contractors prevent discrimination and ensure nondiscrimination in all their programs and activities, whether those programs and activities are federally-funded or not.

1.04 ENVIRONMENTAL IMPACT: It is TxDOT’s intent to purchase goods, equipment, and services having the least adverse environmental impact within the constraints of statutory purchasing requirements, departmental need, availability, and sound economic considerations in accordance with 34 TAC §20.306 and 20.307.

1.05 COMPLIANCE WITH LAWS: Vendor must comply with all federal, state, and local laws, statutes, ordinances, rules and regulations, and the orders and decrees of any court or administrative bodies or tribunals in any matter affecting contract performance, including, if applicable, laws and regulations regarding workers’ compensation, minimum and maximum salaries and wages, prompt payment, and licensing. Vendor must maintain all licenses and certifications required by law or by the contract throughout the term of the contract. When required, vendor must furnish TxDOT with satisfactory proof of its compliance.

PART 2. GENERAL INSTRUCTIONS

2.01 SPECIFICATIONS

(a) Respondent must carefully examine the solicitation. Respondent is responsible for securing any additional information from the TxDOT purchaser needed to gain a clear and full understanding of TxDOT’s requirements.

2 – 24

(b) TxDOT will not be bound by any oral statement or representation contrary to the written specifications of the solicitation. Any revision, clarification, or interpretation pertaining to the solicitation will be in writing and issued by TxDOT as an addendum. Any change or interpretation not in an addendum will not legally bind TxDOT. Any addendum must be issued through TxDOT’s Procurement Division.

(c) The goods furnished or services performed shall be in accordance with the specifications set forth in the solicitation and with these Terms and Conditions. TxDOT will provide clarification of the specifications and determine the quality and acceptability of goods furnished or work performed.

If the solicitation is for a service, TxDOT will determine the manner of performance, the rate of progress of the work, and whether vendor’s performance of the service is acceptable.

(d) Any catalog, brand name, or manufacturer’s reference used in the solicitation is descriptive only (not restrictive) and is used to indicate type and quality desired. Responses on brands of like nature and quality will be considered unless advertised as proprietary or sole source under Government Code §2155.067. Respondent must show manufacturer, brand or trade name, and other description of the product offered in response to the solicitation. If offer is for other than example(s) shown in the solicitation, include illustration(s) and complete description(s) of product(s) in the response to the solicitation. If respondent takes no exception to specifications or reference data in the response, vendor will be required to furnish brand names, numbers, etc., as specified.

(e) Unless otherwise specified, all goods offered must be new and in first-class condition, including shipping and storage containers. Verbal agreements to the contrary will not be recognized.

(f) Manufacturer’s standard warranty must apply unless otherwise stated in this solicitation.

(g) All electrical items must meet all applicable OSHA standards and regulations and bear the appropriate listing from UL, FMRC, or NEMA.

(h) Any iron or steel product produced through a manufacturing process and used in the project must be produced in the United States, to the extent required by Government Code Chapter 2252, Subchapter G. That Subchapter generally applies to contracts to (A) construct, remodel, or alter a building, a structure, or infrastructure; (B) supply a material for a project described by subsection (A); or (C) finance, refinance, or provide money from funds administered by a governmental entity for a project described by subsection (A).

2.02 RESPONSE SUBMISSIONS

(a) Response must be submitted as noted in the solicitation.

(b) Late responses will not be considered under any circumstances.

(c) Documentation provided with the response should be complete and comprehensive. TxDOT will not be responsible for locating or securing information not included in the response. Failure to furnish required documentation with the response may result in the response being deemed incomplete and non-responsive, resulting in rejection. TxDOT will not be responsible for any expenses relating to responses or development of documentation that may result from this solicitation.

(d) Failure to sign the solicitation will disqualify the response. The person signing the response must have authorization to contractually bind the company. The solicitation response must include an Employer Identification Number (EIN) and full firm name and address. The EIN should be entered in the space provided on the solicitation.

(e) Facsimile (Fax) responses will not be considered unless otherwise stated in the solicitation. Fax responses must be received before the hour and date specified for the solicitation opening.

TxDOT will not be responsible for failure of electronic equipment or operator error. Responses that are late, illegible, incomplete, or otherwise non-responsive will not be considered.

3 – 24

(f) Email responses may be accepted if stated on the solicitation. Email responses must be received before the hour and date specified for the solicitation opening and be in Portable Document Format (PDF) (except for pricing schedules, which must be submitted in Excel format using the pricing spreadsheet developed by the department). All attached documents together must not exceed a total of 20 MB, must be signed by respondent, and be attached to the email to be considered for award. TxDOT will not be responsible for failure of electronic equipment, operator error, or system delays or outages. Responses that are late, illegible, incomplete, file-corrupted, flagged as a virus, or otherwise non-responsive will not be considered.

(g) RESPONDENT EXCEPTIONS OR CONDITIONED RESPONSES: Exceptions taken by respondent to TxDOT’s Terms and Conditions, or respondent’s Terms and Conditions attached to a response, will not be considered unless specifically referred to and clearly identified as such within the response, including, without limitations, exceptions related to software maintenance and usage or equipment maintenance services. TxDOT may reject a response that takes exception to TxDOT’s Terms and Conditions.

(h) TxDOT reserves the right to accept or reject all or any part of any response, waive minor technicalities, and make an award to best serve the interests of the state. TxDOT reserves the right to reject any response not prepared and submitted in accordance with the solicitation requirements.

(i) Response should indicate number of days required to deliver goods, or begin service (if required), at TxDOT’s designated location. Failure to indicate delivery time obligates vendor to complete delivery in fourteen (14) calendar days.

(j) Samples, when requested, must be furnished at no cost to TxDOT. TxDOT may perform tests on samples. If not destroyed in testing, samples will be returned upon request at respondent’s expense. Each sample must be marked with respondent’s name and address and TxDOT solicitation number. Samples must not be enclosed or attached to a response unless specified in the solicitation.

(k) The response, including price, is irrevocable for 120 calendar days following the hour and date specified for the solicitation opening. TxDOT may extend this period with respondent’s written agreement.

2.03 PRICING

(a) TxDOT’s automated purchasing system requires pricing to be submitted per unit and extended by multiplying the submitted price by the quantity. Unit prices govern in the event of extension errors. If a trade discount is offered on the solicitation response, it should be deducted, and net line extensions should be shown.

(b) All purchases are on a firm, fixed price basis unless otherwise stated in the solicitation.

(c) Vendor must not increase price(s) during the term of the contract unless otherwise stated in the contract. Vendor must give price reductions to TxDOT that result from reduced cost to vendor during the term of the contract.

(d) All prices must be F.O.B. destination, freight prepaid and allowed. This means vendor must prepay the freight charges and include them in the unit price.

(e) Purchases made for state use are exempt from state and local sales tax and federal excise tax.

Do not include tax in response pricing unless otherwise specified in the solicitation. State Sales Tax and Federal Excise Tax Exemption Certificates will be furnished by TxDOT on request.

(f) The contract may contain a “Total Cost Not to Exceed” statement. Vendor must not perform any work that may exceed either the contract total or the not-to-exceed total without prior written authorization from TxDOT.

(g) Consistent and continued tie response pricing may lead to rejection of the responses by TxDOT and investigation for antitrust violations.

4 – 24

2.04 ADA CONSIDERATIONS AND NOTIFICATION: Persons with special needs or disabilities who plan to attend any pre-response conference or bid opening and who require auxiliary aids or service should contact the purchaser noted on the solicitation as the point-of-contact a minimum of three (3) business days prior to the meeting so arrangements can be made.

2.05 RESPONSE OPENINGS AND DISCLOSURE OF INFORMATION

(a) At the time of opening for RFOs or RFPs, only the names of respondents will be announced.

Prices will not be disclosed.

(b) At the time of opening for RFQs and IFBs, names of respondents will be announced, and pricing disclosed.

(c) Information submitted in an accepted response will not be returned to respondent. Government Code Chapter 552 (the “Public Information Act”) allows the public to have access to information in the possession of a governmental body through an open records request. Therefore, respondent must clearly identify in the response any confidential or proprietary information. Proprietary information identified by respondent in the response will be kept confidential by TxDOT to the extent permitted by state law. TxDOT will use best efforts to give respondent or vendor an opportunity to present to the Office of the Attorney General its arguments for non-disclosure of its identified confidential or proprietary information.

2.06 ALTERATIONS OR WITHDRAWAL OF RESPONSES

(a) Any alterations to a response made before the opening date and time must be initialed by respondent or authorized agent. Response cannot be altered or amended after the opening date and time.

(b) A response may be withdrawn if requested in writing prior to the opening or closing date and time.

A response may be withdrawn from consideration after the opening date only with the approval of TxDOT based on respondent’s written, acceptable reason. The response will not be considered for award but will be retained by TxDOT according to the response information confidentiality provision referenced in §2.05 (c).

2.07 DETERMINING AWARD: A response to a solicitation is an offer to contract with TxDOT based upon the terms, conditions, and specifications contained in the solicitation. Responses do not become contracts unless and until they are accepted through an authorized TxDOT designee by issuance of a contract. In determining the best value for the state, the purchase price and whether the goods or services meet specifications are the most important considerations, unless otherwise stated in the solicitation.

(a) BEST VALUE CRITERIA FOR PURCHASE OF GOODS OR SERVICES: When specified in the solicitation, the factors listed in Government Code §2155.074 will be considered in making a best value award. This section allows TxDOT to apply best value criteria to obtain goods and services that provide the best value for TxDOT. Under these guidelines, a respondent is not automatically awarded a contract if they submit the lowest bid response. TxDOT will be the sole judge as to which response is the most advantageous and in the best interest of TxDOT.

Factors, other than price, that may be considered in making an award:

(1) Installation costs.

(2) Life cycle costs.

(3)…