ESBD_473713_1764972144424_2. Specifications.pdf
PDF 317 KB Posted
- Attached to
- Click 656 Cabinet Interface Device
- Solicitation number
- 601310000098262
- Issued by
- Texas
About this file
This is a technical specification document for the Click 656 Cabinet Interface Device, a product manufactured by Wavetronix for use in traffic management and control systems in Texas. The Click 656 is a compact cabinet-mounted interface module that supports up to six SmartSensors and provides up to 64 detector channels through SDLC communications. The device facilitates communication between sensors and controllers while offering power distribution, surge protection, and network connectivity. It features multiple connection options including Ethernet, RS-232, RS-485, USB, and T-bus ports, along with an on-site OLED configuration panel and web-based interface for device management. The unit operates within ambient temperature ranges of -29°F to 165°F, weighs 6 pounds, and is designed for both shelf and 19-inch rack mounting configurations. Included components with the standard order (Part No. 102-0451) are a 6-foot AC power cable, 5-foot CAT5 Ethernet cable, and a 7-position insulation displacement plug.
The Click 656 operates on 100-240 VAC input at 50-60 Hz frequency with maximum power consumption of 112 watts at 80°C, providing 24 VDC output to connected sensors. The device complies with NEMA TS2-2003 standards and FCC requirements, with surge immunity ratings per IEC/EN 61000-4-5 standards at level 4 for sensor ports and level 3 for AC input. Wavetronix provides a two-year warranty against material and workmanship defects, comprehensive user documentation, quick start guides, and optional extended support services available through authorized representatives. Optional accessories available for separate purchase include mounting brackets, shelving units, SDLC cables and hubs. The manufacturer is located at 1827 W. 650 N, Springville, Utah, with sales and support contact available at 801-734-7200 or sales@wavetronix.com.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Click 656
Cabinet interface device The Click 656 provides support for SmartSensor Matrix and Advance in one compact case. This module communicates directly to the controller through SDLC, and supports contact closure devices as well. It also provides power, surge protection, and Ethernet connectivity for all sensors.
˿ Provides power, connectivity, and surge protection for up to six SmartSensors
˿ Sends sensor detection data directly to controller through the SDLC port
˿ Can be used in place of Intersec-tion Preassembled Backplates
˿ Has a power switch for each sen-sor, allowing you to turn sensors on and off individually
˿ Provides up to 64 detector chan-nels via SDLC communications
˿ Can also be used to send sensor detection data to contact closure cards
˿ Provides an Ethernet port for network connectivity
˿ Has multiple configuration con-nections for communicating from your computer to the connected sensors:
| ̀ USB |
| ̀ RJ-11 jacks for RS-485 |
| ̀ DB-9 connector for RS-232 |
| ̀ T-bus port |
˿ Can be easily installed in standard 19” cabinet or used on a shelf
Click 656 cabinet interface device www.wavetronix.com
CONTROL
DATA
Status Ethernet
RXTXPort 1 SDLC
SDLC
Serial
+DC
-DC
+485 -485
GN
D
RDTDOKPW
Sensors 1-6
PW
R
PW
R
1827 W 650 N, Springville, UT 84663, US • (801) 734-7200 • www.wavetronix.comWX-500-0322 Part No: 102-0451
Wavetronix Page 1 of 3
WX-500-0322
Part No: 102-0451
Physical properties
| ˿ Weight: 6 lbs. (2.72 kg) |
| ˿ Dimensions: 6.6 in. × 5.1 in. × 7.3 in. (16.8 cm × 13 cm × 18.5 cm) |
Operating conditions
| ˿ Ambient operating temp: -29°F to 165°F (-34°C to 74°C) |
| ˿ Humidity: up to 95% RH |
Mounting
| ˿ Shelf-mount |
| ˿ 19” rack-mount |
Connections ˿ Power
| ̀ AC input: IEC AC input |
| ˿ Ethernet |
| ̀ One RJ-45 10/100 Ethernet jack on the front of the device |
| ˿ SDLC |
| ̀ One SDLC port on the front of the device |
| ˿ Six terminal block connectors on back of device for connecting |
to sensors ̀ Cable terminal points for sensor power and RS-485 communications
| ̀ Matching terminal blocks are included with Click 656 |
| ̀ Matches terminal blocks used for cable termination with |
Wavetronix intersection preassembled backplates ˿ Six RJ-11 jacks on faceplate of device for connecting to contact closure devices
| ̀ Communicate via RS-485 |
| ̀ Jacks make up physical interface of data bus on device and |
are for sending detection data from sensors on to contact closure devices such as rack cards (which are not included)
| ̀ Communicate with rack cards via jumper cables |
| ˿ Six communication ports on faceplate make up physical inter- |
face of control bus and are for connecting to the sensors to configure them
| ̀ DB-9 port for communicating via RS-232 |
| ̀ Two RJ-11 jacks for communicating via RS-485 |
| ̀ USB micro-B connector |
| ̀ T-bus port for connecting to a T-bus; allows Click 656 to |
send DC power and RS-485 communications to other devices connected to a T-bus
Power
| ˿ Power supply voltage: 100 to 240 VAC |
| ˿ AC frequency: 50–60 Hz |
| ˿ Max power: 112 W @ 80ºC |
| ˿ 24 VDC output on sensor connectors |
Configuration
| ˿ OLED panel and keypad for on-site device configuration |
| ˿ Web interface for device discovery and output configuration |
using web browser ˿ Device supports connecting up to six SmartSensors to the controller, providing up to 64 detector channels via SDLC communications
| ˿ Four multicolored LEDs with activity indicating functions: |
| ̀ Red LED (PW) illuminates when device has power |
| ̀ Blue LED (OK) extinguishes if device has been disabled by |
surges ̀ Green LED (TD) illuminates when data is transmitted on the control bus ̀ Yellow LED (RD) illuminates when data is received on the control bus ˿ Each data bus RJ-11 jack on the faceplate corresponds to one sensor and has the following features:
| ̀ Switch for turning the power to that sensor on and off |
| ̀ LED for indicating when that sensor has power |
Ordering information Click 656 102-0451
Included components 310-0400 – 6-ft. 3-pin AC power cable 310-0416 – 5-ft. CAT5 Ethernet cable 150-0430 – 7-position insulation displacement plug
Optional accessories (sold separately) 102-0531 – Click 656 U Mount Bracket 102-0462 – Click 656 3U Mounting Shelf 310-0411 – SDLC Cable 310-0413 – SDLC Y Cable 102-0449 – 4-port SDLC Hub
Contact us 801.734.7200 sales@wavetronix.com www.wavetronix.com
Click 656 technical specifications
Wavetronix Page 2 of 3
WX-500-0322
Part No: 102-0451
˿ Switch for turning power on and off to entire device
Surge protection
| ˿ Surge immunity sensor ports: IEC/EN 61000-4-5 level 4 |
| ˿ Surge immunity AC input: IEC/EN 61000-4-5 level 3 |
Testing ˿ Complies with the applicable standards stated in the NEMA
TS2-2003 Standard
| ˿ FCC-compliant |
| ˿ Passes manufacturer’s test before shipping |
Support ˿ Extended support options are available from Wavetronix; con-tact a Wavetronix representative for more information
| ˿ Comprehensive user guide |
| ˿ Quick start guide |
Warranty ˿ Two-year warranty against material and workmanship defect
Wavetronix Page 3 of 3
File details come from the government source that posted it. Updated .