ESBD_434437_1752107676493_554-25-011 - IFB.pdf

TEXAS ANIMAL HEALTH COMMISSION

INVITATION FOR BID (IFB)

for

HEAVY DUTY HYDRAULIC SQUEEZE CHUTE

NIGP CLASS/CODE: 825-22

IFB No.: 554-25-011

PROCUREMENT SCHEDULE

EVENT DATE*

Publication of Invitation for Bid (IFB) on the Electronic State Business Daily at https://www.txsmartbuy.gov/esbd

Wednesday, July 9th, 2025

IFB Questions Due Wednesday, July 16th, 2025 (3:00 PM CST)

Agency Responses to Vendor Questions, or Clarifications Friday, July 18th, 2025

Response Deadline Wednesday, July 30th, 2025 (2:00 P.M. CST)

Award Date August 2025

*Please note that the dates listed on this procurement schedule are tentative and subject to change.

http://www.txsmartbuy.com/esbd

TABLE OF CONTENTS

1 Submission Instructions

1.1 Introduction

1.2 Bid Labeling and Delivery Instructions

1.3 Response Completeness

1.4 Submission Checklist

2 Procurement Schedule 3 Submission Information

3.1 Clarifications

3.2 Contents of Bid

3.3 Reservations

3.4 Non-Interest of Agency Employees

3.5 Amendment of Bids

3.6 Withdrawal of Bids

3.7 Agency Point of Contact

INVITATION FOR BIDS

Solicitation Documents Attached Separately

• Attachment A: Information and Certifications Form

• Attachment B: Terms and Conditions

• Attachment C: Reference Photograph

Texas Animal Health Commission

IFB 554-25-011

1 Submission Instructions

1.1 Introduction

This Invitation for Bid (IFB) is issued on behalf of Texas Animal Health Commission (TAHC) by the Purchasing Department, which is the sole point of contact during the procurement process.

Pursuant to the Provisions of the Texas Government Code, Title 10, Subchapter D., Chapter

2156.121 – 2156.127, sealed bids will be received until the date and time established for receipt.

After receipt, only the names of the respondents may be made available to the public. Contract dollar amount and other bid details may only be divulged after award of a contract, if a contract is awarded, and must be formally requested through the proper request for information channels.

1.2 Bid Labeling and Delivery Instructions

One (1) original copy of the bid is to be submitted in a sealed envelope to the Texas Animal Health Commission, Purchasing Department no later than 2:00 p.m. (Central Time) Tuesday, July 30th, 2025. Each envelope must be identified in the lower left corner as follows:

DO NOT OPEN

IFB PROPOSAL FOR 554-25-011

HEAVY DUTY HYDRAULIC SQUEEZE CHUTE

OPENING DATE: 07/30/2025

Sealed bids are to be mailed to:

Purchasing Department Attn: Bryan Krugman 2105 Kramer Lane Austin, TX 78758

Electronic or facsimile (fax) bids will be rejected.

Bids received after the date and time specified above will be rejected.

Any bid received in an envelope not properly and clearly marked as specified above may result in the bid being rejected. It is the vendor’s responsibility to comply with the above in order to assure its inclusion at the bid opening.

In no event will TAHC be responsible or liable for any delivery delays or errors. Reponses must be received by TAHC by the response deadline as identified in the Procurement Schedule on the cover page of this document in order to be considered.

All bids must be delivered to the Texas Animal Health Commission as required by the instructions within this request.

1.3 Response Completeness

In order to be considered for award, bidders must submit a comprehensive Response which includes all required information and documentation as outlined in this solicitation to ensure the Bidder meets all requirements, possesses the required experience and qualifications and has the capacity to provide the goods and related services described in this Solicitation.

Failure to complete the Information and Certifications Form will result in disqualification of the bid.

All addenda to and interpretation of this solicitation shall be in writing. The State shall not be legally bound by an addenda or interpretation that is not in writing.

1.4 Submission Checklist

The following information is required to be considered a complete bid.

IFB with Authorized Signature and Date Page 5 Vendor Contact Information Page 5 Federal Employer’s Identification Number or Social Security Number

Delivery and Cash Discount Page 5 Estimated Delivery Date Page 6 Quote – Per Unit and Total Price, *additional pages may be used for quote and information if needed

Information and Certifications Document Attachment A

2 Procurement Schedule The Procurement Schedule dates on the cover page are tentative and subject to change. TAHC reserves the right to modify the dates listed at any time by issuing an addendum.

Bids must be received by TAHC prior to the response time listed on the Procurement Schedule on the cover page of this document or as modified by an addendum. It is the responsibility of the Bidder to ensure that its Bid is received before the Response deadline. TAHC is not responsible for lost, late or misdirected responses.

3 Submission Information

3.1 Clarifications

If additional information is needed to interpret the specifications/requirements, written questions must be received no later than 2:00 p.m. (CST), July 16th, 2025, to the person noted in section 3.7.

No information provided verbally, or by any other personnel, will be considered binding. All respondents should use this written document and its attachments as the sole basis for bidding at this time.

Additionally, the TAHC prohibits communication initiated by the respondent to any Agency official, representative from another entity or employee evaluating or considering the bids, prior to the time a decision has been made.

3.2 Contents of Bid

All attachments, additional pages, addenda, or explanations supplied by the vendor with this bid will be considered as part of the bid response. All bids received in response to this request will become the property of the State and will not be returned to the respondents.

3.3 Reservations

This IFB does not commit the Agency to award a contract, to pay any costs incurred in the preparation of a response to this request, or to procure or contract for services or supplies. The Purchasing Department reserves the right to accept or reject any or all bids received as a result of this request, to waive minor irregularities in the procedure, to negotiate with any qualified source, or to cancel in part or in its entirety, this IFB, if it is in the best interest of the Texas Animal Health Commission to do so.

3.4 Non-Interest of Agency Employees

No employee on the evaluation committee shall have any financial interest, either direct or indirect, in the bid or contract. No employee of the evaluation committee shall exercise any undue influence in the awarding of the bid or contract.

3.5 Amendment of Bids

By Agency: Invitation for Bids may be amended by the Purchasing Department in response to any need for further clarification, specifications and/or requirement changes, new opening date, etc.

Amendments will be posted to the Electronic State Business Daily at, https://www.txsmartbuy.gov/esbd. It is the responsibility of prospective vendors to check this website for any future amendments, questions, revisions, etc., prior to the bid opening date. All amendments must be acknowledged on the signature page in the area provided. Failure to do so may result in your response being rejected.

If you are unable to access the Internet, contact the purchaser listed within the IFB to request paper copies.

By Vendor: Bids may only be amended after receipt by the Purchasing Department by submitting a later dated bid that specifically states that it is amending an earlier bid. No bid may be amended after the bid opening date unless requested by the Purchasing Department.

3.6 Withdrawal of Bids

Bids may be withdrawn only in total, and only by a written request to the Purchasing Department prior to the time and date scheduled for opening of bids.

https://www.txsmartbuy.gov/esbd.

3.7 Agency Point of Contact

Refer inquiries to:

Bryan Krugman, CTCD, CTCM

2105 Kramer Lane Austin, TX 78758

Phone (512) 719-0743 Email: bryan.krugman@tahc.texas.gov

All written requests for information will be communicated to all applicants known to the agency.

mailto:bryan.krugman@tahc.texas.gov

INVITATION FOR BIDS

IF NOT BIDDING DO NOT RETURN THIS FORM.

BIDDER AGREES TO COMPLY WITH ALL CONDITIONS TO THIS IFB.

When BIDDING:

Each bid must be placed in a separate envelope with bid opening date and requisition number annotated immediately below return address on SEALED BID ENVELOPE.

BID OPENING ► July 30, 2025 @ 2:00 P.M

REQUISITION NO. ► 554-25-011

▼ FAILURE TO SIGN WILL DISQUALIFY BID ▼

AUTHORIZED SIGNATURE DATE

*By signing this bid, bidder certifies that if a Texas address is shown as the address of the bidder, bidder qualifies as a Texas Resident Bidder as defined in Rule 1 TAC 111.2

P.O. Box 12966, AUSTIN, TX 78711-2966 HAND DELIVER (8:00 a.m. – 5:00 p.m.) OR OVERNIGHT/EXPRESS TO:

2105 Kramer Lane, Austin, TX 78758

DELIVERY IN DAYS, CASH DISCOUNT % DAYS

Check below if preference claimed under Rule 1 TAC 113.8

▼ VENDOR NAME, ADDRESS, AND CONTACT INFORMATION ▼

Supplies, materials or equipment: produced in TX/ offered by TX bidders* Agricultural products grown in TX Agricultural products offered by TX bidders* USA produced supplies, materials or equipment Products of persons with mental or physical disabilities Products made of recycled, remanufactured, or environmentally sensitive materials Energy efficient products Rubberized asphalt paving material Recycled motor oil and lubricants Products produced at facilities located on formerly contaminated property Products and services from economically depressed or blighted areas

The Texas ID Number is the taxpayer number assigned and used by the Comptroller of Public Accounts of Texas. If this number is not known, complete the following:

Enter Federal Employer's Identification Number or Sole owner should also enter Social Security Number

AWARD NOTICE: The State reserves the right to make an award on the basis of low line item bid, low total of line items, or in any other combination that will serve the best interest of the State and to reject any and all bid items in the sole discretion of the State.

ITEM

NO. CLASS & ITEM DESCRIPTION QUANTITY UNIT MAKE/

MODEL

UNIT

PRICE

EXTENSION

NIGP Commodity Code:

825-22 Chutes, Corrals, Livestock Holding Pens, etc.

PLEASE RETURN ALL PAGES OF THIS BID.

Vendor Note: The following specifications describe the heavy-duty hydraulic squeeze chute the Texas Animal Health Commission will use to inspect and treat cattle for ectoparasites and diseases.

The following specifications describe a complete unit, with special additions/deletions. Vendor shall bid cost of complete units only, delivered (FOB) to the above destination address. Unit shall be completely assembled and tested before delivery.

AGENCY TO INVOICE

TEXAS ANIMAL HEALTH COMMISSION

P.O. BOX 12966

AUSTIN, TEXAS 78711-2966

DESTINATION OF GOODS IF DIFFERENT THAN ABOVE

TEXAS ANIMAL HEALTH COMMISSION

2105 KRAMER LANE

AUSTIN, TX 78758

1.

Heavy-Duty Hydraulic Squeeze Chute

Reference Model:

SILENCER - Heavy duty, wide body extended, portable, with overhead scales, gasoline powered hydraulic supply, with custom roof and side kit, and carrier system.

**Original or TAHC approved equivalent**

Please see Attachment C for a picture of the desired product.

Unit shall be custom fabricated to meet or exceed the following specifications:

Product Specifications:

(Dimensions below do not include removable carrier system or parts.)

• Overall Length:

Min: 100 inches Max: 140 inches

• Overall Height:

Min: 90 inches Max: 96 inches

• Interior Height:

Min: 66 inches Max: 69 inches

• Overall Width:

Min: 58 inches Max: 70 inches

• Frame:

Steel tubing material thickness:

Min: 3/16 inch Max: 1/4 inch

Reinforced construction for long-term heavy-duty field use.

• Veterinary side access doors on the rear of chute.

• Black rubber slats or louvers lining the sides of the chute to help obstruct animal vision.

• Chute sides must have drop-down upper side access panels.

• Fully sheeted horizontal split drop panels on both sides of the chute for access to animal legs.

Each

Unit Price

Total Price

TOTAL

PRICE OF

BID:

• Front and Rear gate Doors:

Must open fully without obstruction to animals moving in and out of the chute.

Must open to the same width top and bottom.

Head capture doors movement:

Open and close with a hinge-style action.

Doors that only operate side to side will not be accepted.

Head capture doors must be padded for animal safety.

Head capture doors must have a lower cylinder to prevent head door flexing and uneven wearing.

Head capture doors must maintain even pressure at top and bottom.

Neck bars shaped with a slight curve, wider in the center of the opening.

Hydraulic neck bars with the ability to turn animal head left or right.

• Hydraulic Kick bars

• Hydraulic Controls on the left side of the

• 3 Spool hydraulic valves.

• All hydraulic hoses must be fitted and designed for long-term heavy-duty field use.

• Separate Top and Bottom side squeeze controls to prevent cattle from falling inside

• Interior bottom width must have a minimum adjustable range of 8 inches to 20 inches.

• Contact points must be sleeved in oil-based, high-density polyethylene for noise reduction.

• The floor must be metal non-slip.

• Must come with a removable drop bar, also known as a sternum bar.

• Non-Detachable roof with folding sides.

The roof must cover entire length and hang over chute sides enough to allow the side covers to fold down during transport.

Estimated Delivery Date:

• Overhead scales:

*Reference brand scale system* Datamars TruTest XR5000 or TAHC approved equivalent.

Scale readout placed above hydraulic controls on the left side of the chute.

• Buffalo gate (Crash gate) attached to the front of the chute.

Must swing to opposite side (right side) from controls.

• Chute Carrier:

Chute must come with either a carrier or removable components that allow for the chute to be towed by a vehicle.

All carrier components must be removeable to allow for unimpeded chute operation.

Hitch:

Bumper pull: 2-5/16 inch tow ball Bulldog style coupler

Must come with safety tow chains.

Wheels and Tires:

Must be appropriately sized for intended use.

Preferred 14 ply tires but not required.

Must come with a spare wheel and tire.

• Gasoline powered hydraulic pump on a separate wheeled cart.

Connection hose from pump to chute:

Min: 30 feet Max: 40 feet

• Chute, roof, sides, and wheeled cart must all be protected with a rust inhibiting coating and paint designed for heavy-duty agricultural use.

Color: Non-specific

• Must include minimum one (1) year warranty.

• Delivery Address:

TAHC Central Office 2105 Kramer Lane Austin, TX 78758

Please Note: Vendor shall assign a serial number, unique to the chute and that number shall be embedded into the steel frame on the left rear corner of the chute.

Number shall be no less than ½ inch high for easy visibility.

ESTIMATED DELIVERY AFTER RECEIPT

OF OFFER (ARO) / PURCHASE ORDER

(Please estimate the amount of time it will take for the product to arrive once a PO is awarded to the vendor, to the right under “Estimated Delivery.”)

*TAHC will accept vendor bids for products equivalent to the recommended model. If an equivalent product is proposed, the Bidder must include the published specifications for the equivalent product in its response to TAHC.

(Please fill in the lines to the right, under “Unit Price” and “Total Price” for each line of the quote.

Agency will accept a separate page if vendor needs more room for added information. “Total Price of Bid” needs to be filled out at the bottom right-hand corner, this will be the total cost for the products.)

Purchasing/Bidding Contact:

Bryan Krugman, CTCD, CTCM bryan.krugman@tahc.texas.gov mailto:bryan.krugman@tahc.texas.gov

Payment:

Payment will be made in accordance with the Texas Prompt Payment Act, Texas Government Code, Subtitle F, Chapter 2251. Vendor shall submit one copy of a correct itemized invoice showing the purchase order number, payee I.D., remit to address, and phone number on invoice. Vendors should submit an electronic invoice; all electronic invoices shall be sent to:

financial_services@tahc.texas.gov (Note: there is an underscore *_* between “financial” and “services”)

If electronic invoice is not an option, please mail invoices to:

Attn: Financial Services P.O. Box 12966

Austin, TX 78711-2966

The TAHC will not incur any penalty for late payment if payment is made in 30 days or less from receipt of goods or services and a correct invoice, whichever is later.

Payment Contact:

Financial Services (512)719-0700 financial_services@tahc.texas.gov

Before Delivery:

Vendor shall perform all make-ready checks to ensure all systems and accessories are separating properly including, but not limited to, hitch functionality, wheel bearing lubrication, tire pressure, and lighting.

mailto:financial_services@tahc.texas.gov mailto:financial_services@tahc.texas.gov

Deliveries:

Deliveries should be made between 8 am and 4 pm Monday through Friday, except on regularly observed state or federal holiday.

The vendor is responsible for unloading all items during delivery. The TAHC does not have the resources or equipment to unload items during delivery.

The vendor is cautioned to ship only the quantity of items ordered. The TAHC is not obligated to accept any items exceeding the quantity stated on the purchase order. Overages may be returned to the vendor at the vendor’s expense. If the vendor refuses the return, the overage will be handled as a gift to the state.

All prices shall be F.O.B. Destination. Freight prepaid and allowed. This means the vendor shall prepay and include the freight charges in the unit price.

Please Note: Payment will be made within 30 days of satisfactory delivery. Vendor may arrange for direct deposit with payment contact above.

The Texas Animal Health Commission is exempt from all state tax.

The Bidder agrees to comply with all terms and conditions below and on attached pages.

Catalogs, brand names or manufacturer’s references are descriptive only, and indicate type and quality desired. If proposing other than the referenced brands/model number, respondent must show manufacturer, brand or trade name, product number and provide complete descriptive information of product offered and include with response.

INVITATION FOR BIDS