ESBD_409970_1744381330471_Solicitation Package_601290000031232.pdf

�b c d e f c g h i j k l m n k k k k k o l m o mk p q l r q m k m r o s k k t u v w x y z { | } y ~ � � � � � � � � z � | � z � v w x y z { | } y ~ � � � � � � � � z � | � z � v w x y z { | } y ~ � � � � � � � � z � | � z �v w x y z { | } y ~ � � � � � � � � z � | � z �

SHIP TO THE FOLLOWING LOCATION

UNLESS OTHERWISE NOTED

SEE SPECIFIC INSTRUCTIONS FOR

EACH LINE ITEM.

United States

SEE SPECIFIC INSTRUCTIONS FOR

EACH LINE ITEM

1 200.00 BOX 55072972015

TAPE, PAVEMENT MARKING (TEMPORARY)

CONSTRUCTION-GRADE PREFAB, TAPE,

PAVEMENT, 6 IN. X 2/50 YD ROLLS,

YELLOW

SHIP THIS ITEM TO THE FOLLOWING LOCATION

SEGUIN REGIONAL SUPPLY CENTER

2024 HWY 46 NORTH

SEGUIN TX 78155-2206

United States

LISTED ON MATERIAL/PRODUCER LIST FOR

PAVEMENT MARKING MATERIAL

(CONSTRUCTION-GRADE, TEMPORARY), LATEST

REVISION

**Must meet Specification DMS 8243 and listed on the Material Producer List**

Example: Make: Swarco Model: FOL 300 or TxDOT approved equal **Each box contains 2 each - 6"x 50yd rolls**

Respondent must indicate below the make and model of the item bid.

Make:____________________

Model:___________________

Page 1INVITATION FOR BID 04/11/2025

SOLICITATION NO: 601290000031232

OPENING DATE 03:00 PM Apr 15, 2025 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

Item Item Quantity Unit Make/ Unit Extended No. Description Model Price Price

IF RESPONDING, FORM MUST BE SIGNED. IF NOT RESPONDING. DO NOT RETURN THIS FORM.

Failure to sign will disqualify response.

Authorized Signature Date

Printed Name

By signing solicitation, respondent certifies that if the Texas address is shown as the address of the respondent, respondent qualifies as a Texas Bidder as defined in 34 T AC Rule 20.306

The following comments apply to the entire Solicitation

1. Description of Goods: This solicitation is to establish a contract for pavement tape for Seguin Regional Distribution Center.

2. Emergency:

This solicitation is for an emergency purchase made under Texas Government Code, §2155.137 and 34 TAC 20.82.

3. Electronic State Business Daily (ESBD): This solicitation is posted on the ESBD.

It is the responsibility of the respondents to check the ESBD for addenda or additional information related to the solicitation. Vendors active on the CMBL at the time the solicitation was posted will receive notifications regarding addenda or additional information related to the solicitation.

http://www.txsmartbuy.com/esbd

4. Order of Precedence: In the event of any conflict, terms contained in the document shall prevail in the order as listed below:

4.1. Solicitation No. 601290000031232

4.2. Specification No. DMS 8243 Dated

January 2009

4.3. TxDOT Terms and Conditions, January

4.3.1. Payment will be made in

accordance with Part 4, Para. 4.04 (b)

5. Estimated Quantities Quantities are estimates only to be used for the purpose of comparing responses.

The respondent must enter their unit price on Solicitation.

Total price will be evaluated by multiplying the unit price for each line by the estimated quantities listed on Solicitation.

Page 2INVITATION FOR BID 04/11/2025

SOLICITATION NO: 601290000031232

OPENING DATE 03:00 PM Apr 15, 2025 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

Item Item Quantity Unit Make/ Unit Extended No. Description Model Price Price

TxDOT will order only the amount needed to satisfy operating requirements; no guarantee of any minimum or maximum purchase is made or implied. Total amount ordered must not exceed the aggregate contract amount unless additional funds are allocated, and the total contract amount is increased in accordance with the terms and conditions.

6. Acceptance Inspection: All items ordered will be subject to acceptance inspection and performance testing upon receipt. Acceptance inspection and performance testing will not take more than twenty working days, weather permitting. The vendor will be notified within this time frame of any items not delivered in full compliance with the purchase order specifications. If any items are canceled for non-acceptance, the needed items may be purchased elsewhere, and the vendor may be charged any additional increase in cost and handling.

7. Delivery Delivery must be made between 8 AM and 4 PM Monday through Friday except on regularly observed state or federal holidays, unless prior approval has been obtained from TxDOT.

8. Contact Information The individuals listed below are the only authorized TxDOT contacts.

Contacting any other TxDOT personnel regarding this solicitation, may result in the respondent being disqualified.

Any changes as a result of questions will be made by TxDOT in the form of an addendum to the solicitation; no oral changes will be considered.

For clarification or questions regarding this solicitation, respondents may contact:

Primary Contact: Taylor Blevins, CTCD Phone: 903-737-9293 Email: Taylor.Blevins@txdot.gov

Secondary Contact: Leigh Wilson, CTCD Phone: 903-510-9276 Email: Leigh.Wilson@txdot.gov

Page 3INVITATION FOR BID 04/11/2025

SOLICITATION NO: 601290000031232

OPENING DATE 03:00 PM Apr 15, 2025 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

9. Vendor Performance: TxDOT will monitor performance on a regular basis.

9.1. TxDOT may consider the following

performance by the vendor as unsatisfactory performance - An unsatisfactory performance determination includes, but is not limited to:

9.1.1. Failure to deliver any portion of

the work product.

9.1.2. Failure to deliver a useable work

product during the term of the contract

9.1.3. Unsatisfactory performance of any

service requirements in the contract

9.2. Exceptional performance

determination includes, but is not limited to:

9.2.1. Deliverables made early upon

TxDOT member request.

9.2.2. Vendor commended for exceptional

customer service

9.2.3. Exceptional service provided

10. Packaging Requirements All cardboard boxes must be labeled, listing the manufacturer's name, part number, description, quantity, and box weight.

All cardboard boxes must be suitable in bursting strength to allow for the weight of the contents and to allow for the stacking of the boxes a maximum of four high on a pallet for shipping and storage.

Packaging other than specified herein is acceptable only with the prior written approval of TxDOT’s designated TxDOT representative.

11. Response Submission

11.1. GENERAL FORMAT: The respondent

must submit one signed and dated response to include the documentation required per response paragraph 11.3 to the email address as indicated on the

Page 4INVITATION FOR BID 04/11/2025

SOLICITATION NO: 601290000031232

OPENING DATE 03:00 PM Apr 15, 2025 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

“Instructions to Respondents” page.

11.2. The respondent shall not encrypt

or password protect response or embed documents within the response; each section must be its own separate document.

11.3. RESPONSE: Failure by the

respondent to submit the documentation listed below will result in the response being considered non-responsive. The response submission must be submitted with each section named with the “Section #” and brief description not to exceed 30 total characters as a separate document in the following format:

11.3.1. Section 1 – Signed Invitation

for Bid

11.3.2. Section 2 – Texas Family Code

Schedule

11.3.3. Section 3 – Addenda (if

applicable)

12. Vendor Point of Contact: Name:

Phone:

Email:

13. Vendor Verification of Federal Employer Identification Number: Vendor to provide current company name:

Vendor to provide federal EIN:

If invoice will be submitted by, and/or payment made to an EIN or company name different from the vendor on the contract, vendor must complete the following to authorize payment:

EIN of company authorized to invoice for vendor: Name of Invoicing Company:

EIN of company authorized to receive payment: Name of company to be paid:

14. Preferences Check below if preference claimed under rule 34TAC 20.306.

Tie-Bid Preferences:

_Supplies, materials or equipment produced in Texas or offered by a Texas bidder.

_ Agricultural products produced or grown in Texas.

_Agricultural products and services offered by Texas bidder.

Page 5INVITATION FOR BID 04/11/2025

SOLICITATION NO: 601290000031232

OPENING DATE 03:00 PM Apr 15, 2025 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

_USA produced supplies, material or equipment.

Products produced at facilities located on formerly contaminated property Products and services from economically depressed or blighted areas.

Goods produced or offered by a Texas bidder that is owned by a service-disabled veteran who is a Texas resident.

Source Preferences:

Products of persons with mental or physical disabilities Vendors that meet or exceed air quality standards. For contracts to be performed, in whole or in part, in a designated non-attainment area or an affected county, as those terms are defined by Health and Safety Code

386.001 Texas emission reduction plan

Manufacturer that has a recycle program for computer equipment Contractor providing foods of higher nutritional value Specification Preferences:

Point lines made of recycled materials, remanufactured, or environmentally sensitive materials including recycled steel Energy efficient products Rubberized asphalt paving materials Recycled motor oil and lubricants

If the name of your company is not printed on the heading of this solicitation, you must write the full name of company, full name of signer, mailing address, and respondent's employer identification number (EIN) on the face of the solicitation. To minimize identity theft, every company must have an employer Identification number (EIN), also known as a federal tax identification number, prior to award of a contract.

For information on obtaining your EIN, call 800-829-4933 or visit the following website:

https://www.irs.gov/businesses/small-bus inesses-self-employed/employer-id-numbers

(NOTE: this link will not work if

Page 6INVITATION FOR BID 04/11/2025

SOLICITATION NO: 601290000031232

OPENING DATE 03:00 PM Apr 15, 2025 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

capitalization is used. Type in navigation bar using lower case letters)

15. Calendar of Events

Estimated Solicitation Posting Date:

04/11/2025

Response Due Date: 04/15/2025, 3:00 p.m.

central time

Tentative Date for Contract Award:

05/02/2025

Page 7INVITATION FOR BID 04/11/2025

SOLICITATION NO: 601290000031232

OPENING DATE 03:00 PM Apr 15, 2025 To:

Blank Vendor X Austin TX 78701

VENDOR ID: 9999999999 - 999

Return Sealed Response To:

See Body of Solicitation for Specific Return Instructions

BUYER: Blevins, Taylor

PHONE: 903/427-3561

Shows opening date and number in lower left hand corner of sealed response envelope and show return address of vendor.

Vendor agrees to comply with the solicitation below and at terms and conditions.

F.O.B. destination means vendor retain title to goods until delivered and the price quoted includes all freight charges.

Delivery in _______________________________Days Cash Discount_____________%_________________ Days

QUOTE F.O.B. DESTINATION

DEPARTMENTAL MATERIALS SPECIFICATION

TEMPORARY CONSTRUCTION-GRADE

PREFABRICATED PAVEMENT MARKINGS

TEXAS DEPARTMENT OF TRANSPORTATION 1 – 5 EFFECTIVE DATE: JANUARY 2009

DMS - 8243

TEMPORARY CONSTRUCTION-GRADE PREFABRICATED

PAVEMENT MARKINGS

EFFECTIVE DATE: JANUARY 2009

8243.1. Description. This Specification governs for the materials, composition, quality, sampling, and testing of temporary, construction-grade, prefabricated pavement markings. These markings are non-removable and are designed for very temporary applications.

8243.2. Units of Measurements. The values given in parentheses (if provided) are not standard and may not be exact mathematical conversions. Use each system of units separately. Combining values from the two systems may result in nonconformance with the standard.

8243.3. Material Producer List. The Materials and Pavements Section of the Construction Division (CST/M&P) maintains the Material Producer List (MPL) of all materials conforming to the requirements of this Specification. Materials appearing on the MPL, entitled “Pavement Marking Material (Construction-Grade, Temporary),” require no further testing, unless deemed necessary by the Project Engineer or CST/M&P.

8243.4. Bidders’ and Suppliers’ Requirements. Before any material is considered, it must be of manufacture and product code or designation shown on the MPL maintained by the Department.

8243.5. Pre-Qualification Procedure.

A. Pre-Qualification Request. Submit a written request for evaluation to the Texas Department of Transportation, Construction Division, Materials and Pavements Section (CP51), 125 East 11th Street, Austin, Texas 78701-2483.

Include the following information with the request:

Company name, Physical and mailing addresses, Type of material, and

Contact person, telephone number, and email address.

B. Pre-Qualification Testing. All material must pass the appropriate road test before placement on the MPL. The Department will select the location for the road tests. The prospective producer is responsible for the cost of traffic control. When multiple producers participate in the road test, all participants will share the traffic control cost.

Locations may be in either or both straight or curved sections of roadways. Some of the tests required by this Specification extend over a prolonged period, and some tests cannot be made after the material is applied; therefore, testing for acceptance of material supplied ftp://ftp.dot.state.tx.us/pub/txdot-info/cmd/mpl/cgtmm.pdf ftp://ftp.dot.state.tx.us/pub/txdot-info/cmd/mpl/cgtmm.pdf

TEXAS DEPARTMENT OF TRANSPORTATION 2 – 5 EFFECTIVE DATE: JANUARY 2009

on any Contract or State purchase order will only be considered on those materials that are determined by the Director of CST/M&P as having an established performance history.

C. Definitions.

Test location—any location not within 300 ft. of an intersection or other location where traffic may be required to stop by a traffic control device.

D. Pre-Qualification Samples.

1. Markings Road Test and Lab Tests. For the road and other pre-qualification tests, submit at no cost to the Department a minimum of 150 ft. of white 4 in. wide markings and 50 ft. of yellow 4-in. wide markings.

2. Transverse Markings. Place three transverse markings at each location, 8 ft. in length and approximately 4 in. apart.

3. Road Conditions. Markings may be placed on either asphaltic or concrete pavements.

The average minimum daily traffic (ADT) per lane must be a minimum of 15,000.

There will be no distinction between truck and car traffic.

4. Results. Markings must remain in place, serviceable, distinctly reflective, and with no significant loss, for a minimum of 30 days. The markings must meet a minimum reflectivity level of 150 mcd/m2/lux for white and 100 mcd/m2/lux for yellow after 30 days when measured with a handheld retroreflectometer meeting the following requirements:

ASTM E 1710

30-m geometry an entrance angle of 88.76° an observation angle of 1.05°

E. Evaluation. Inspection and evaluation of results will be performed at the end of the roadway test.

1. Qualification. Manufacturers will be notified after their material has been evaluated. If approved for use by the Department, the material will be added to the MPL.

Report changes in the composition or in the manufacturing process of any material to CST/M&P. Significant changes reported by the manufacturer, as determined by the Director of CST/M&P, may require a re-evaluation of performance.

2. Failure. Producers not qualified under this Specification may not furnish materials for Department projects and must show evidence of correction of all deficiencies before reconsideration for qualification.

Costs of sampling and testing are normally borne by the Department; however, the costs to sample and test materials failing to conform to the requirements of this Specification are borne by the Contractor or supplier. The Director of CST/M&P will assess this cost at the time of testing.

TEXAS DEPARTMENT OF TRANSPORTATION 3 – 5 EFFECTIVE DATE: JANUARY 2009

Amounts due the Department will be deducted from monthly or final estimates on Contracts or from partial or final payments on direct purchases by the State.

F. Periodic Evaluation. The Department reserves the right to periodically evaluate the performance of materials, to randomly select samples from materials submitted on State purchase orders, and to perform random audits of test reports. Department representatives may sample material from the manufacturing plant, the project site, and the warehouse.

CST/M&P reserves the right to test samples to verify compliance with this Specification.

Failure of materials to comply with the requirements of this Specification as a result of periodic evaluation may be cause for removal of those materials from the MPL.

The Department will sample in accordance with Tex-732-I and will test in accordance with the methods listed in Article 8243.6.

G. Disqualification. The Department reserves the right to conduct whatever tests considered necessary to identify a pre-approved material and to determine if a change has been made in composition, manufacturing process, or quality that may affect its durability or performance.

Changes detected in the composition or in the manufacturing process, not reported by the manufacturer, may be cause for removal of that material from the MPL.

Failure of materials to comply with the requirements of this Specification as a result of periodic evaluation may be cause for removal of those materials from the MPL.

8243.6. Material Requirements.

A. General Requirements. The temporary, construction-grade, prefabricated pavement markings must be conformable, weather and traffic resistant, and reflective.

Materials used in the manufacture and construction of the film are at the discretion of the manufacturer. Materials and construction of the non-removable prefabricated pavement-marking film supplied to the Department or to Contractors must remain the same as those used in the pre-qualification sample.

Precoat the back of the marking film with a pressure-sensitive adhesive suitable for affixing the markings to asphaltic or concrete pavements. The adhesive must not require heat, solvents, or any other means to activate adhesion of the material to roadway surfaces.

B. Dimensional Tolerance. Supply the material in the width, shape, or shapes as specified, meeting the following requirements:

All lengths and widths of shapes must be within 1/8 in. of those specified.

Width of roll material must be within 1/8 in. of that specified.

Thickness without adhesive must not vary over -10% nor +25% of the average thickness determined on the pre-qualifying sample.

Total thickness must equal or exceed 15 mils.

TEXAS DEPARTMENT OF TRANSPORTATION 4 – 5 EFFECTIVE DATE: JANUARY 2009

C. Color. The color of the pavement marking material must appear uniform. Its CIE Chromaticity Coordinates must fall within an area having the following corner points and meet the brightness requirements listed in Table 1.

Table 1

CIE Chromaticity Coordinate Corner Points and Brightness Requirements

1 2 3 4 Brightness x y x y x y x Y Y

White .290 .315 .310 .295 .350 .340 .330 .360 Min. 65

Yellow .470 .455 .510 .489 .490 .432 .537 .462 45–60

NOTE: White and yellow pavement marking materials must meet the above specified color requirements for each color respectively before and after 70 hrs of exposure in an Atlas Weather-Ometer. Weather-Ometer exposure will be in accordance with ASTM G 15 using Exposure Cycle 1 with a quartz inner filter glass and Type “S” Borosilicate outer filter glass. Prepare panels for testing with pavement marking materials supplied to the destination of goods address.

D. Resistance to Environmental Conditions.

1. Moisture. Apply the material to a clean, aluminum panel according to the manufacturer’s instructions and allow to cure for 24 hours at 16 to 27°C (60 to 80°F).

Submerge the panel in water for 4 hours and then allow to dry. The material must show no deterioration, change in color, loss of reflectivity, nor loss of adhesion.

2. Chemicals. Contact between the pavement marking material and calcium chloride or sodium chloride must not cause deterioration, change in color, nor loss of retroreflectivity of the material. Oil droppings from traffic must not deteriorate the material.

3. Temperature. The pavement marking material must retain its shape and integrity at all pavement temperatures between -18 to 71°C (0 and 160°F). The pavement temperature will be determined in accordance with Tex-829-B.

4. Bead Adhesion. When tested in accordance with Tex-852-B, the rating must be excellent after 200 cycles.

5. Retroreflectivity. The temporary, construction-grade, prefabricated pavement markings must meet a minimum retroreflectivity level of 250 mcd/m2/lux for white and 175 mcd/m2/lux for yellow when measured with a handheld retroreflectometer meeting the following requirements:

ASTM E 1710

30-m geometry an entrance angle of 88.76° an observation angle of 1.05°

TEXAS DEPARTMENT OF TRANSPORTATION 5 – 5 EFFECTIVE DATE: JANUARY 2009

6. Chemical Analysis. The infrared and x-ray analysis of the face side of the markings must match those of the pre-approved material. The infrared and x-ray spectra will be determined in accordance with Tex-888-B and Tex-896-B. The infrared analysis of the adhesive must match that of the pre-approved material.

7. Storage. The material must meet the criteria of this Specification after being stored in a cool, dry indoor area for a period of 1 year.

8243.7. Payment. Payment for all materials will be in conformance with the provisions of the purchase order or Contract awarded by the State.

Texas Department of Transportation

Material/Producer List 1 7/15/2021

Pavement Marking Material (Construction-Grade, Temporary)

NOTE: Refresh the page to view the most current list.

The following producers of temporary construction-grade prefabricated pavement marking materials have been pre-qualified per DMS-8243, “Temporary Construction-Grade Prefabricated Pavement Markings.”

The materials will not require sampling and testing before use unless deemed necessary by the Department. Tex-732-I, “Sampling Prefabricated Pavement Marking Materials,” describes the sampling method.

The Department reserves the right to conduct random sampling of pre-approved, certified materials for testing and to perform random audits of test reports. Department representatives may sample material from the manufacturing plant, the project site, and the warehouse. The Materials and Pavements Section of the Construction Division (CST/M&P) reserves the right to test samples to verify compliance with DMS-8243.

For more information, contact CST/M&P’s Coatings and Traffic Materials Branch at (512) 865- 1542.

Pavement Marking Materials (Construction-Grade, Temporary)

Producer Product

3M Company 710 Stamark 270 ES Stamark 380 i-es Stamark 780 i-es

FOL Tape 300

Swarco Industries, Inc. XJM-2 Temporary

Revised: September 27, 2023

1 - 1

TEXAS FAMILY CODE SCHEDULE

SOLICITATION NO. 601290000031232

Ineligibility to Receive State Grants or Loans or Receive Payment on State Contracts Respondent shall fill out the appropriate information, sign and return the schedule.

Under Family Code §231.006, relating to child support obligations, Respondent and any other individual or business entity named in this solicitation are eligible to receive the specified payment and acknowledge that this contract may be terminated and payment withheld if this certification is inaccurate. Any response submitted under this solicitation shall contain the names and social security numbers of person or entity holding at least a twenty-five percent ownership interest in the business entity submitting the response.

Respondents meeting the ownership must complete the following:

XXX-XX-

Name Social Security Number

XXX-XX-

Name Social Security Number

XXX-XX

Name Social Security Number

If respondent does not meet the ownership criteria under Texas Family code - Section 231.006, check the box below, sign and return the schedule.

This Schedule is not applicable

FEDERAL PRIVACY ACT NOTICE: This notice is given pursuant to the Federal Privacy Act. Disclosure of your Social Security (SSN) is required under Section 231.006(c) and Section 231.302(c)(2) of the Texas Family Code. The SSN will be used to identify persons that may owe child support. The SSN will be kept confidential to the fullest extent allowed under Section 231.302(e), Texas Family Code.

Signature

Title

THIS PAGE MUST BE RETURNED WITH THE RESPONSE. FAILURE TO SIGN AND RETURN THIS

PAGE MAY RESULT IN THE RESPONSE BEING CONSIDERED NON-RESPONSIVE.

Revised January 2025 i

TEXAS DEPARTMENT OF TRANSPORTATION

TERMS AND CONDITIONS

TABLE OF CONTENTS

PART 1. INTRODUCTION

1.01 GENERAL

1.02 STATUTORY AUTHORITY

1.03 TITLE VI ASSURANCE

1.04 ENVIRONMENTAL IMPACT

1.05 COMPLIANCE WITH LAWS

PART 2. GENERAL INSTRUCTIONS

2.01 SPECIFICATIONS

2.02 RESPONSE SUBMISSIONS

2.03 PRICING

2.04 ADA CONSIDERATIONS AND NOTIFICATION

2.05 RESPONSE OPENINGS AND DISCLOSURE OF INFORMATION

2.06 ALTERATIONS OR WITHDRAWAL OF RESPONSES

2.07 DETERMINING AWARD

2.08 PREFERENCES

2.09 DELIVERY

2.10 INSPECTIONS AND TESTS

2.11 VENDOR PERFORMANCE

PART 3. RESPONDENT AFFIRMATIONS

3.01 FALSE STATEMENTS

3.02 REPRESENTATIONS, WARRANTIES, AND COVENANTS

3.03 GRATUITIES

3.04 CERTAIN BIDS AND CONTRACTS PROHIBITED

3.05 ANTITRUST LAWS

3.06 DECEPTIVE TRADE PRACTICES; UNFAIR BUSINESS PRACTICES

3.07 COLLUSION

3.08 INELIGIBILITY UNDER FAMILY CODE

3.09 CONTRACTING WITH EX-TXDOT EXECUTIVE DIRECTOR

3.10 DEBT TO THE STATE

3.11 RESPONDENT ELIGIBILITY

3.12 NEPOTISM DISCLOSURE

3.13 BOYCOTTING ISRAEL

3.14 DISCLOSURE OF RESTRICTED EMPLOYMENT

3.15 ANTI-TERRORISM OR TERRORIST ORGANIZATION PROHIBITED

3.22 BOYCOTTING ENERGY COMPANIES

3.23 FOREIGN ADVERSARIES

PART 4. GENERAL TERMS AND CONDITIONS

4.01 CONTRACTS

4.02 FUNDING

4.03 INVOICING: NO PAYMENT WILL BE MADE UNDER THE CONTRACT WITHOUT THE PRIOR

SUBMISSION OF DETAILED AND CORRECT INVOICES WHICH COMPLY WITH THE FOLLOWING

REQUIREMENTS:

4.04 PAYMENT

(c) As otherwise stated in the solicitation

4.05 INTELLECTUAL PROPERTY

4.06 ELECTRONIC AND INFORMATION RESOURCES ACCESSIBILITY STANDARDS

4.08 SITE VISITS

ii

4.09 NON-WAIVER OF RIGHTS

4.10 LIMITATION ON AUTHORITY; NO OTHER OBLIGATIONS

4.11 VENUE AND JURISDICTION; APPLICABLE LAW

4.12 VENDOR ASSIGNMENTS

4.13 FORCE MAJEURE

4.15 INDEMNIFICATION

4.16 DAMAGE TO TXDOT PROPERTY

4.17 PUBLIC INFORMATION ACT AND CONFIDENTIALITY

4.18 BUY TEXAS

4.19 COMPETENCE OF VENDOR

4.20 CORRECTIONS TO WORK

4.21 IT SERVICE CONTRACTS SECURITY

4.22 NOTICES

4.23 PUBLIC DISCLOSURE

4.24 DISASTER RECOVERY PLAN

PART 5. INSURANCE

5.01 PRIOR TO CONTRACT AWARD

5.02 DURING TERM OF CONTRACT

5.03 WAIVER OF SUBROGATION ENDORSEMENT

5.04 WORKERS’ COMPENSATION INSURANCE

5.05 WORKERS’ COMPENSATION INSURANCE FOR BUILDING AND CONSTRUCTION

SERVICES

5.06 COMMERCIAL GENERAL LIABILITY INSURANCE

5.07 COMMERCIAL AUTOMOBILE POLICY

PART 6. VENDOR PERSONNEL MANAGEMENT

6.01 INDEPENDENT CONTRACTOR

6.02 ALCOHOL, DRUG, AND SMOKE-FREE WORKPLACE

6.03 REPLACEMENT OF PERSONNEL

6.04 LABOR/MATERIAL/EQUIPMENT

6.05 ENGLISH-SPEAKING STAFF

6.06 FELONY CRIMINAL CONVICTIONS

6.07 SUBCONTRACTING REQUIREMENTS

6.08 PAYMENT OF SUBCONTRACTORS

6.09 VENDOR TITLE VI AFFIRMATIONS

6.10 E-VERIFY

PART 7. DISPUTE RESOLUTION

7.01 DISPUTE RESOLUTION

PART 8. CONTRACT TERMS

8.01 TERM OF CONTRACT

8.02 ORDER OF PRECEDENCE

8.03 TERMINATION OF A CONTRACT

8.04 REMEDIES:

8.05 SALE OR ASSIGNMENT

8.06 RENEWAL OF CONTRACT

8.07 EXTENSION OF CONTRACTS

8.08 SEVERABILITY CLAUSE

8.09 AMENDING THE CONTRACT: ALL ALTERATIONS, ADDITIONS, OR DELETIONS TO THE

CONTRACT MUST BE IN WRITING AND MUTUALLY AGREED UPON BY BOTH PARTIES AND

PUT INTO EFFECT WITH A PURCHASE ORDER CHANGE NOTICE ISSUED BY TXDOT. VENDOR

WILL NOT BE ENTITLED TO PAYMENT FOR ANY ADDITIONAL SERVICES, WORK, OR

PRODUCTS THAT ARE NOT AUTHORIZED BY A PROPERLY-EXECUTED PURCHASE ORDER

CHANGE NOTICE. ALL ALTERATIONS, ADDITIONS, OR DELETIONS TO THE TERMS OF THE

iii

CONTRACT THAT ARE REQUIRED BY CHANGES IN FEDERAL OR STATE LAW OR

REGULATIONS ARE AUTOMATICALLY INCORPORATED INTO THE CONTRACT WITHOUT A

PURCHASE ORDER CHANGE NOTICE AND WILL BECOME EFFECTIVE ON THE DATE

DESIGNATED BY SUCH LAW OR BY REGULATION

8.10. THIRD-PARTY BENEFICIARIES: THE CONTRACT IS MADE SOLELY AND SPECIFICALLY

AMONG AND FOR THE BENEFIT OF THE PARTIES NAMED HEREIN AND THEIR RESPECTIVE

SUCCESSORS AND ASSIGNS, AND NO OTHER PERSON WILL HAVE ANY RIGHT, INTEREST,

OR CLAIMS HEREUNDER OR BE ENTITLED TO ANY BENEFITS PURSUANT TO OR ON

ACCOUNT OF THE CONTRACT AS A THIRD-PARTY BENEFICIARY OR OTHERWISE

8.11 BINDING EFFECT AND SURVIVAL OF OBLIGATIONS

APPENDIX A

1 – 24

TEXAS DEPARTMENT OF TRANSPORTATION

TERMS AND CONDITIONS

PART 1. INTRODUCTION

1.01 GENERAL: These Terms and Conditions apply to the solicitation for goods and/or services [whether a Request for Quote (RFQ), Invitation for Bid (IFB), Request for Offer (RFO) or Request for Proposal (RFP)] offered by the Texas Department of Transportation (TxDOT) (“solicitation”) and any contract issued by TxDOT resulting from the solicitation (“purchase order” or “contract”). The term “response” or “bid” means the proposal, quote, bid, or offer made to TxDOT in response to the solicitation. The term “respondent” or “bidder” means the party who submits the response to the solicitation, including the vendor. The term “vendor” or “contractor” means the party listed as vendor in the contract. Any reference to time in the solicitation or contract shall mean central time.

1.02 STATUTORY AUTHORITY: The solicitation and contract are authorized by Government Code Title 10, Subtitle D (the “Purchasing Act”). The solicitation and contract are subject to all applicable requirements of the Purchasing Act [in particular, Government Code Chapter 2151 (General Provisions), Chapter 2155 (Purchasing: General Rules and Procedures), Chapter 2157 (Purchasing: Purchase of Automated Information Systems), and Chapter 2161 (Historically Underutilized Businesses, “HUBs”)] and those requirements established by rule of the Texas Comptroller of Public Accounts (CPA), Statewide Procurement Division (SPD), as contained in Title 34, Chapter 20, of the Texas Administrative Code (“TAC”), and to other applicable federal and state statutes and rules herein cited. Any references in this contract to the “Government Code” mean the Texas Government Code.

1.03 TITLE VI ASSURANCE: TxDOT, in accordance with the provisions of Title VI of the Civil Rights Act of 1964 (78 Stat. 252, 42 U.S.C. §§ 2000d to 2000d-4) and 49 C.F.R. Part 21 and 28 CFR §50.3 (for purposes of this section and §6.10 only, the “Acts” and the “Regulations,” respectively), hereby notifies all bidders that it will affirmatively ensure that in any contract entered into pursuant to this advertisement, disadvantaged business enterprises will be afforded full and fair opportunity to submit bids in response to this invitation and will not be discriminated against on the grounds of race, color, or national origin in consideration for an award.

Nondiscrimination programs require that federal-aid recipients, sub-recipients, and contractors prevent discrimination and ensure nondiscrimination in all their programs and activities, whether those programs and activities are federally-funded or not.

1.04 ENVIRONMENTAL IMPACT: It is TxDOT’s intent to purchase goods, equipment, and services having the least adverse environmental impact within the constraints of statutory purchasing requirements, departmental need, availability, and sound economic considerations in accordance with 34 TAC §20.306 and 20.307.

1.05 COMPLIANCE WITH LAWS: Vendor must comply with all federal, state, and local laws, statutes, ordinances, rules and regulations, and the orders and decrees of any court or administrative bodies or tribunals in any matter affecting contract performance, including, if applicable, laws and regulations regarding workers’ compensation, minimum and maximum salaries and wages, prompt payment, and licensing. Vendor must maintain all licenses and certifications required by law or by the contract throughout the term of the contract. When required, vendor must furnish TxDOT with satisfactory proof of its compliance.

PART 2. GENERAL INSTRUCTIONS

2.01 SPECIFICATIONS

(a) Respondent must carefully examine the solicitation. Respondent is responsible for securing any additional information from the TxDOT purchaser needed to gain a clear and full understanding of TxDOT’s requirements.

2 – 24

(b) TxDOT will not be bound by any oral statement or representation contrary to the written specifications of the solicitation. Any revision, clarification, or interpretation pertaining to the solicitation will be in writing and issued by TxDOT as an addendum. Any change or interpretation not in an addendum will not legally bind TxDOT. Any addendum must be issued through TxDOT’s Procurement Division.

(c) The goods furnished or services performed shall be in accordance with the specifications set forth in the solicitation and with these Terms and Conditions. TxDOT will provide clarification of the specifications and determine the quality and acceptability of goods furnished or work performed.

If the solicitation is for a service, TxDOT will determine the manner of performance, the rate of progress of the work, and whether vendor’s performance of the service is acceptable.

(d) Any catalog, brand name, or manufacturer’s reference used in the solicitation is descriptive only (not restrictive) and is used to indicate type and quality desired. Responses on brands of like nature and quality will be considered unless advertised as proprietary or sole source under Government Code §2155.067. Respondent must show manufacturer, brand or trade name, and other description of the product offered in response to the solicitation. If offer is for other than example(s) shown in the solicitation, include illustration(s) and complete description(s) of product(s) in the response to the solicitation. If respondent takes no exception to specifications or reference data in the response, vendor will be required to furnish brand names, numbers, etc., as specified.

(e) Unless otherwise specified, all goods offered must be new and in first-class condition, including shipping and storage containers. Verbal agreements to the contrary will not be recognized.

(f) Manufacturer’s standard warranty must apply unless otherwise stated in this solicitation.

(g) All electrical items must meet all applicable OSHA standards and regulations and bear the appropriate listing from UL, FMRC, or NEMA.

(h) Any iron or steel product produced through a manufacturing process and used in the project must be produced in the United States, to the extent required by Government Code Chapter 2252, Subchapter G. That Subchapter generally applies to contracts to (A) construct, remodel, or alter a building, a structure, or infrastructure; (B) supply a material for a project described by subsection (A); or (C) finance, refinance, or provide money from funds administered by a governmental entity for a project described by subsection (A).

2.02 RESPONSE SUBMISSIONS

(a) Response must be submitted as noted in the solicitation.

(b) Response must be time stamped in TxDOT’s mail room or hand-delivered to the address on the solicitation before the hour and date specified for the solicitation opening. Late responses will not be considered under any circumstances and will be returned unopened to respondent.

(c) Documentation provided with the response should be complete and comprehensive. TxDOT will not be responsible for locating or securing information not included in the response. Failure to furnish required documentation with the response may result in the response being deemed incomplete and non-responsive, resulting in rejection. TxDOT will not be responsible for any expenses relating to responses or development of documentation that may result from this solicitation.

(d) Failure to sign the solicitation will disqualify the response. The person signing the response must have authorization to contractually bind the company. The solicitation response must include an Employer Identification Number (EIN) and full firm name and address. The EIN should be entered in the space provided on the solicitation.

(e) Facsimile (Fax) responses will not be considered unless otherwise stated in the solicitation. Fax responses must be received before the hour and date specified for the solicitation opening.

TxDOT will not be responsible for failure of electronic equipment or operator error. Responses that are late, illegible, incomplete, or otherwise non-responsive will not be considered.

3 – 24

(f) Email responses may be accepted if stated on the solicitation. Email responses must be received before the hour and date specified for the solicitation opening and be in Portable Document Format (PDF) (except for pricing schedules, which must be submitted in Excel format using the pricing spreadsheet developed by the department). All attached documents together must not exceed a total of 20 MB, must be signed by respondent, and be attached to the email to be considered for award. TxDOT will not be responsible for failure of electronic equipment, operator error, or system delays or outages. Responses that are late, illegible, incomplete, file-corrupted, flagged as a virus, or otherwise non-responsive will not be considered.

(g) RESPONDENT EXCEPTIONS OR CONDITIONED RESPONSES: Exceptions taken by respondent to TxDOT’s Terms and Conditions, or respondent’s Terms and Conditions attached to a response, will not be considered unless specifically referred to and clearly identified as such within the response, including, without limitations, exceptions related to software maintenance and usage or equipment maintenance services. TxDOT may reject a response that takes exception to TxDOT’s Terms and Conditions.

(h) TxDOT reserves the right to accept or reject all or any part of any response, waive minor technicalities, and make an award to best serve the interests of the state. TxDOT reserves the right to reject any response not prepared and submitted in accordance with the solicitation requirements.

(i) Response should indicate number of days required to deliver goods, or begin service (if required), at TxDOT’s designated location. Failure to indicate delivery time obligates vendor to complete delivery in fourteen (14) calendar days.

(j) Samples, when requested, must be furnished at no cost to TxDOT. TxDOT may perform tests on samples. If not destroyed in testing, samples will be returned upon request at respondent’s expense. Each sample must be marked with respondent’s name and address and TxDOT solicitation number. Samples must not be enclosed or attached to a response unless specified in the solicitation.

(k) The response, including price, is irrevocable for 120 calendar days following the hour and date specified for the solicitation opening. TxDOT may extend this period with respondent’s written agreement.

2.03 PRICING

(a) TxDOT’s automated purchasing system requires pricing to be submitted per unit and extended by multiplying the submitted price by the quantity. Unit prices govern in the event of extension errors. If a trade discount is offered on the solicitation response, it should be deducted, and net line extensions should be shown.

(b) All purchases are on a firm, fixed price basis unless otherwise stated in the solicitation.

(c) Vendor must not increase price(s) during the term of the contract unless otherwise stated in the contract. Vendor must give price reductions to TxDOT that result from reduced cost to vendor during the term of the contract.

(d) All prices must be F.O.B. destination, freight prepaid and allowed. This means vendor must prepay the freight charges and include them in the unit price.

(e) Purchases made for state use are exempt from state and local sales tax and federal excise tax.

Do not include tax in response pricing unless otherwise specified in the solicitation. State Sales Tax and Federal Excise Tax Exemption Certificates will be furnished by TxDOT on request.

(f) The contract may contain a “Total Cost Not to Exceed” statement. Vendor must not perform any work that may exceed either the contract total or the not-to-exceed total without prior written authorization from TxDOT.

(g) Consistent and continued tie response pricing may lead to rejection of the responses by TxDOT and investigation for antitrust violations.

4 – 24

2.04 ADA CONSIDERATIONS AND NOTIFICATION: Persons with special needs or disabilities who plan to attend any pre-response conference or bid opening and who require auxiliary aids or service should contact the purchaser noted on the solicitation as the point-of-contact a minimum of three (3) business days prior to the meeting so arrangements can be made.

2.05 RESPONSE OPENINGS AND DISCLOSURE OF INFORMATION

(a) At the time of opening for RFOs or RFPs, only the names of respondents will be announced.

Prices will not be disclosed.

(b) At the time of opening for RFQs and IFBs, names of respondents will be announced, and pricing disclosed.

(c) Information submitted in an accepted response will not be returned to respondent. Government Code Chapter 552 (the “Public Information Act”) allows the public to have access to information in the possession of a governmental body through an open records request. Therefore, respondent must clearly identify in the response any confidential or proprietary information. Proprietary information identified by respondent in the response will be kept confidential by TxDOT to the extent permitted by state law. TxDOT will use best efforts to give respondent or vendor an opportunity to present to the Office of the Attorney General its arguments for non-disclosure of its identified confidential or proprietary information.

2.06 ALTERATIONS OR WITHDRAWAL OF RESPONSES

(a) Any alterations to a response made before the opening date and time must be initialed by respondent or authorized agent. Response cannot be altered or amended after the opening date and time.

(b) A response may be withdrawn if requested in writing prior to the opening or closing date and time.

A response may be withdrawn from consideration after the opening date only with the approval of TxDOT based on respondent’s written, acceptable reason. The response will not be considered for award but will be retained by TxDOT according to the response information confidentiality provision referenced in §2.05 (c).

2.07 DETERMINING AWARD: A response to a solicitation is an offer to contract with TxDOT based upon the terms, conditions, and specifications contained in the solicitation. Responses do not become contracts unless and until they are accepted through an authorized TxDOT designee by issuance of a contract. In determining the best value for the state, the purchase price and whether the goods or services meet specifications are the most important considerations, unless otherwise stated in the solicitation.

(a) BEST VALUE CRITERIA FOR PURCHASE OF GOODS OR SERVICES: When specified in the solicitation, the factors listed in Government Code §2155.074 will be considered in making a best value award. This section allows TxDOT to apply best value criteria to obtain goods and services that provide the best value for TxDOT. Under these guidelines, a respondent is not automatically awarded a contract if they submit the lowest bid response. TxDOT will be the sole judge as to which response is the most advantageous and in the best interest of TxDOT.

Factors, other than price, that may be considered in making an award:

(1) Installation costs.

(2) Life cycle costs.

(3) Quality and reliability of goods and services.

(4) Delivery terms.

(5) Indicators of probable vendor performance under the contract such as past vendor performance, the vendor's financial resources and ability to perform, the vendor's experience or demonstrated capability and responsibility, and the vendor's ability to provide reliable maintenance agreements and support.

(6) Cost of any employee training associated with a purchase.

5 – 24

(7) The effect of a purchase on agency productivity.

(8) The impact of a purchase on the agency's administrative resources.

(9) Other factors relevant to determining best value for the state set forth in the solicitation.

(b) ADDITIONAL BEST VALUE CRITERIA FOR RFO PURCHASES: As provided in Government Code §2157.003, additional best value criteria will be used on all information technology equipment or service purchases including but not limited to:

(1) Purchase price.

(2) Compatibility to facilitate exchange of existing data.

(3) Capacity for expansion and upgrading to more advanced levels of technology.

(4) Quantitative reliability factors.

(5) Level of training required to bring end-users to a stated level of proficiency.

(6) Technical support requirements for maintenance of data across a…