ESBD_393542_1738181871243_TMD25-FMO-0036466 Ellington Hanger Power - Final.pdf

TEXAS MILITARY DEPARTMENT OF THE STATE OF TEXAS

SOLICITATION

NIGP Codes 940-54 Power Supply Installation, Electric

910-82 Wiring and Other Electrical Maintenance and

Repair Services

SOLICITATION NO.

TMD25-FMO-0036466

TYPE OF SOLICITATION

INVITATION FOR BID (IFB)

DATE ISSUED

01/29/2025

INVITATION FOR BIDS (IFB) – Ellington Hanger Power

Respondent must submit their responses via email to:

procurement@military.texas.gov no later than 2:00 P.M. CST on 02/28/2025

FOR INFORMATION CONTACT:

Robert Black

Contract Specialist, CTCD, CTCM

Contract Administrator

PHONE: 512-782-5425

EMAIL: Procurement@military.texas.gov

RESPONSE (Respondent must fully complete)

DISCOUNT FOR PROMPT PAYMENT: 10 DAYS

20 DAYS

30 DAYS

___ DAYS

ACKNOWLEDGMENT OF ADDENDA:

Respondent acknowledges receipt of solicitation addenda and related documents numbered and dated:

ADDENDUM NO. DATE ADDENDUM NO. DATE

NAME AND ADDRESS

OF Respondent:

RESPONSE DATE

TELEPHONE NO. (Include area code)

SIGNATURE OF AUTHORIZED REPRESENTATIVE

NAME AND TITLE OF AUTHORIZED REPRESENTATIVE

CERTIFICATION, DISQUALIFICATION, and REMEDIES By signing this document, Respondent represents and warrants that all statements, certifications, and information submitted in response to this solicitation are true, current, complete, and accurate.

Failure to sign will disqualify response. TMD may pursue and enforce any available remedies against the Respondent for making false statements, including disqualifying the Respondent’s response, immediately cancelling any Contract awarded to Contractor, or recommending State of Texas debarment.

TERM, PRICING, and FUNDING The initial Contract term is effective on the effective date stated in the notice of award (or purchase order if there is no notice of award) until completion of the awarded project.

TMD will not allow changes after Date of Award to terms or pricing during either the initial term of the Contract or any optional renewal period.

ANTICIPATED SCHEDULE OF EVENTS

TMD currently anticipates that the selection of successful Respondent and award of the Contract, if any, will proceed according to the following schedule:

Date Time CST Events 01/29/2025 10:00 A.M. CST Solicitation Posted to ESBD

02/11/2025

10:00 A.M. CST

or

1:00 P.M. CST

Mandatory site visits - Ellington Air Force Base, 14657 Sneider Street, Houston, TX 77034. Failure to attend one (1) of the site visits will result in disqualification of the response. State issued identification (i.e. Driver’s License) is required to access the site

02/14/2025 2:00 P.M. CST Last day to submit written questions for clarification to TMD

02/19/2025 Estimated date for TMD to post Question and Answer (Q&A) document to ESBD

02/28/2025 2:00 P.M. CST Deadline for TMD to receive Bids

Intentionally Left Blank

Page 3 of 27 Approved 10/16/2021

ANTICIPATED SCHEDULE OF EVENTS

SECTION A—DEFINITIONS

SECTION B—SERVICES AND PRICES

B.1 PRICING REQUIREMENTS

B.2 INVOICE REQUIREMENTS

B.3 PAYMENTS

B.3.1 Billing and Payment B.3.2 Payment Adjustment B.3.3 Late Payment B.3.4 Deductions for Unacceptable Compliance B.3.5 Withholding of Payment B.3.6 Debts and Delinquencies B.3.7 Right to Offset

B.4 MANDATORY PRICING SCHEDULE

B.4.1 Contract Term Pricing

SECTION C - SPECIFICATIONS

C.1 INTRODUCTION

C.2 Statement of Work

C.3 DELIVERABLES

C.4 ACCEPTANCE CRITERIA

C.5 TMD PERSONNEL

C.5.1. TMD’s Contract Administrator C.5.2 TMD’s Project Manager

C.6 INSURANCE REQUIRED UNDER THE CONTRACT

C.7 UNIFORM GENERAL CONDITIONS FOR CONSTRUCTION PROJECTS

C.8 Identification

SECTION D—CONTRACT COMPLIANCE REPORTS AND DATA

SECTION E—INSTRUCTIONS, CONDITIONS, AND NOTICES TO RESPONDENTS

E.1 RESPONSE PREPARATION INSTRUCTIONS

E.2 AMENDMENTS TO THE SOLICITATION

E.3 LATE SUBMISSIONS, MODIFICATIONS AND WITHDRAWALS OF RESPONSES

E.4 SIGNATURES ON RESPONSE SUBMITTED

E.5 RESPONSE ACCEPTANCE PERIOD

E.6 CONTRACT AWARD

Page 4 of 27 Approved 10/16/2021

E.7 TMD’s RIGHTS

E.8 RESPONSE SUBMISSION INSTRUCTIONS

E.8.1 Volume One – Contract Forms and Required Response Information E.8.2 Volume Two – Information Section E.8.3 Volume Three – Cost and Pricing Response

E.9 DISCUSSION AND CORRESPONDENCE

E.10 SUBMISSIONS SUBJECT TO THE TEXAS PUBLIC INFORMATION ACT

E.11 AGENCY POSTING OF CONTRACTS

E.12 ANTICIPATED SCHEDULE OF EVENTS

E.13 SITE VISIT

SECTION F—EVALUATION CRITERIA

SECTION G—LIST OF ATTACHMENTS

BY NUMBER AND TITLE

Page 5 of 27 Approved 10/16/2021

SECTION A—DEFINITIONS

The following terms and acronyms used in this solicitation have the meanings given in this section unless the context indicates otherwise.

“Bid” means the Respondent’s response to this solicitation. A Bid is an offer to contract based upon the terms, conditions, and specifications contained within the solicitation. Bids do not become contracts until they are accepted through an open market purchase order.

“Respondent” means the individual, business entity, or organization that submits a response in reply to this solicitation with intent to contract with TMD.

“Business Days” means Monday through Friday except for federal, state, and legal holidays observed by the State of Texas.

“Business Hours” means 7:30 a.m. to 5:00 p.m. Central Time, Tuesday through Friday.

“CST” means Central Standard Time.

“Contract” means this formal, written, and legally enforceable agreement between TMD and Contractor.

“Contractor” means the individual, business or other entity awarded the Contract. In the context of submitting a response, “Contractor” also means “Respondent” and “Vendor.”

“Date of Award” means the date the Contract is fully executed.

“Days” means calendar days unless otherwise specified.

“TMD” means the Texas Military Department of the State of Texas, a state agency in the executive branch created under Texas Government Code Ch. 437.

“Fiscal Year” means any of the one (1) year periods beginning September 1 and ending August 31 used for annual budgetary purposes by the State of Texas.

“Parties” means Contractor and TMD.

“Vendor” means the individual, business entity, or organization at any stage in the procurement or contracting process (prior to response, during response, and after contract award).

Page 6 of 27 Approved 10/16/2021

SECTION B—SERVICES AND PRICES

B.1 PRICING REQUIREMENTS

A. Texas Military Department seeks and Contractor shall provide the commodities or services described in Section C, Specifications on a no minimum, as needed, as requested basis. Pricing is firm fixed price to provide permanent power to a hanger tent at Ellington Air Force Base at 14657 Sneider Street, Houston, TX 77034, as requested and authorized by TMD as provided under the Contract. Respondent must price the response on this basis.

B. Contractor must deliver and provide permanent power to a hanger tent at Ellington Air Force

Base at 14657 Sneider Street, Houston, TX 77034 in compliance with all requirements of the Contract with such payment to be processed by TMD after TMD’s receipt, testing and acceptance.

C. Respondent must submit a response that include all costs, fees, licenses, and expenses for

Contractor’s delivery of the permanent power to a hanger tent at Ellington Air Force Base at 14657 Sneider Street Houston, TX 77034 and performance under the Contract and will represent Contractor’s sole compensation under the Contract. No minimum compensation is guaranteed under the Contract. No payments may be approved or made prior to TMD’s acceptance as provided in the Contract.

D. TMD reserves the right to make an award on the basis of low line item bid, low total of line items, or in any other combination that will serve the best interest of TMD and to reject any and all items bid at the sole discretion of TMD. TMD also reserves the right to accept or reject all or any part of any response, waive minor technicalities and award the response to best serve the interests of TMD.

E. Catalogs, brand names, or manufacturer’s references are descriptive only, and indicate type and quality desired. Bids on brands of like nature and quality will be considered unless advertised under Texas Government Code § 2155.067. If a Respondent believes it can satisfy these specifications, it should bid its goods or services and explain how the specifications will be adequately met.

F. If bidding on specifications other than those stated within this solicitation, bid should show manufacturer, brand, or trade name, and other description of product offered. If other than brand(s) specified is offered, specifications, illustrations, and complete descriptions of product offered must be included with bid. Failure to take exception to specifications or reference data will require Respondent to furnish specified brand names, model numbers, etc.

G. Unless otherwise specified, all items bid must be new and unused and of current production.

H. All electrical items must meet all applicable Occupational Safety and Health Administration

(OSHA) standards and regulations, and bear the appropriate listing from Underwriters Laboratories (UL), Factory Mutual Research Corporation (FMRC), or National Electrical Manufacturers Association (NEMA).

I. Consistent and continued tie bidding may cause rejection of bids by TMD and investigation for anti-trust violations.

Page 7 of 27 Approved 10/16/2021

B.2 INVOICE REQUIREMENTS

Invoices are Contractor’s billing for goods or services rendered. TMD will pay Contractor on the basis of itemized invoices submitted to and approved by TMD. The invoices must show the actual deliverables provided and the attendant charge. Itemized invoices must clearly identify the project phase or title, deliverables delivered, the number of hours that each allocated employee worked if applicable, and the date range of work performance for this associated charge.

A. Contractor’s invoice must include the following:

1. the Contract number or Purchase Order number;

2. remittance address; and

3. any prompt payment discount offered.

B. Contractor must send an email with the invoice copy to Payables@military.texas.gov and to the Contract Monitor (if applicable).

An original, hard-copy invoice, if required, will be submitted to the office designated below:

Texas Military Department (TMD) Attn: Accounts Payable Department

P.O. Box 5218, Building 11 Austin, Texas 78763-5218

The State of Texas will not incur any penalty for late payment if the invoice fails to conform to the requirements of this section or if Contractor did not mail the invoice to the appropriate addresses identified in this section.

B.3 PAYMENTS

A. TMD recommends that Contractor receive payments by electronic funds transfer (EFT), also known as direct deposit. If Contractor elects to be set up for direct deposit payment, Contractor must submit a completed Direct Deposit Authorization Form (Attachment G.1).

B. Regardless as to whether Direct Deposit is chosen, Respondent must submit a completed Texas Application for Payee Identification Number (Attachment G.2) to the following address:

Texas Military Department (TMD) Attn: Accounts Payable Department

P.O. Box 5218, Building 11 Austin, Texas 78763-5218

Reference: Contractor Set-up for Solicitation TMD25-FMO-0036466

Notes: Contact Robert Black when completed 512-782-5425 or Procurement@military.texas.gov

C. If Contractor has previously submitted a completed Contractor Direct Deposit Authorization Form to TMD for another separate contract, another form is not required to be submitted.

Page 8 of 27 Approved 10/16/2021

B.3.1 Billing and Payment

A. TMD will not make any payments of any amount to Contractor until an accurate invoice is received that complies with Section B.2 above. TMD will notify Contractor if invoice is deemed to be inaccurate within 20 days of receipt.

B. Texas Government Code Chapter 2251 (the Prompt Payment Act) will govern payment and accrual of interest on any overdue payments.

C. If TMD, for any reason, including lack of supporting documentation, disputes any items in any invoices submitted by Contractor, TMD will place a hold on the disputed items and may pay the remaining amount of the invoice. TMD will timely notify Contractor of the dispute and request clarification or remedial action.

D. If the dispute is resolved in Contractor’s favor, TMD will pay the remaining portion of the original invoice in accordance with the Prompt Payment Act. If the dispute is resolved in TMD’s favor, Contractor must resubmit an invoice reflecting all corrections.

B.3.2 Payment Adjustment

A. TMD may elect to deduct from Contractor payment as specified in this section or any amount specified or any money determined to be due as specified in the Contract.

B. If it is determined that the remaining amount of Contractor payment is not adequate to cover the money determined to be due to TMD, then all remaining Contractor payments will be withheld and an invoice issued to Contractor for the remaining amount due.

C. Contractor must pay the invoiced amount within 30 days of receipt unless Contractor and TMD mutually agree on an alternative payment method.

B.3.3 Late Payment

Any amount owed to Contractor more than one (1) day beyond the date such amount is due as described in this section will accrue interest each day that such amount is not paid at the rate specified by Texas Government Code § 2251.025, provided; however, that this provision will not excuse failure by TMD to make payment in strict accordance with the Contract.

B.3.4 Deductions for Unacceptable Compliance

If Contractor fails to comply with the terms of the Contract, TMD may withhold Contractor’s payment. If non-compliance results in TMD purchasing goods or services from another entity to remedy the non-compliance, TMD will deduct those costs from Contractor’s payment.

B.3.5 Withholding of Payment

A. TMD will have the right to withhold Contractor’s payment until the failures described below have been corrected.

Page 9 of 27 Approved 10/16/2021

1. Failure to submit reports or other documentation required in Section D—Contract Compliance Reports and Data required from Contractor;

2. Failure to comply with background check or security requirements;

3. Failure to respond to audit reports; and

4. Failure to correct identified areas of non-compliance to the satisfaction of TMD within ten days upon receipt of written notification.

B. TMD will not pay interest to Contractor for monies so withheld.

C. Contractor’s withheld payment will be released upon TMD’s satisfaction that compliance has been achieved for 30 consecutive days.

D. In the event that money is due to TMD for Contractor’s failure to provide adequate maintenance or replacement of the property as required in the Contract, the amount required for TMD to correct deficiencies and replace property will be withheld from the final payment.

E. With the exception of disputed issues, such withholding of final payment by TMD will not exceed 120 days from date of the Contract’s termination.

B.3.6 Debts and Delinquencies

TMD is prohibited from issuing any payment to a person or entity that has been reported as having an indebtedness or delinquency to the State of Texas. Contractor agrees and understands that, to the extent Contractor owes any debt or delinquent taxes to the State of Texas, TMD will apply any payments or other amounts Contractor is otherwise owed under the Contract toward the debt or delinquent taxes until the debt or delinquent taxes are paid in full. Contractor must comply with all applicable laws regarding satisfaction of debts or delinquencies to the State of Texas.

B.3.7 Right to Offset

In the event TMD determines that Contractor owes money to TMD under any contract or purchase order, TMD, upon providing Contractor with written notice of its intent to offset, will have the right to withhold monies due to Contractor with respect to the Contract or with respect to any other contract or purchase order with TMD and apply such monies to the money due to TMD.

B.4 MANDATORY PRICING SCHEDULE

B.4.1 Contract Term Pricing

The Respondent must submit its bid price within the Pricing Table located in Attachment G.3, replicating, as necessary, in its exact format.

Bid price must be submitted on the Mandatory Pricing Schedule. Respondents will price per unit shown. Unit prices will govern in the event of extension errors. If a price quotation is submitted as part of Bid, the quotation must be referenced in the response and signed by Respondent to establish formal linkage to the Bid.

Page 10 of 27 Approved 10/16/2021

Prices bid are firm throughout the term of the Contract. “Discount from List” bid pricing is not acceptable unless requested. Cash discounts are not considered in determining an award. Cash discounts offered will be taken if earned.

Page 11 of 27 Approved 10/16/2021

SECTION C - SPECIFICATIONS

C.1 INTRODUCTION

Texas Military Department seeks to provide permanent power to a hanger tent at Ellington Air Force Base at 14657 Sneider Street, Houston, TX 77034, all labor, equipment, supplies and materials to be included.

C.2 STATEMENT OF WORK

C.2.1 Job Requirements:

A. Contractor shall complete and submit Pre-Task Safety Plan.

B. Contractor shall combine two (2) lighting circuits in power panel origin point (panel HB) to accommodate a new 3/50 amp GE breaker.

C. Contractor shall furnish and install one inch (1”) Electrical Metallic Tubing (EMT) raceway with three (3) #6 thermoplastic high heat-resistant nylon (THHN) and one (1) #10 ground from panel HB to northwest (NW) exterior of building.

D. Contractor shall set National Electrical Manufacturer Association (NEMA) 3R rating (N3R) junction box (j-box) and convert to one (1) inch polyvinyl chloride (PVC) for underground raceway.

E. Contractor shall trench across lawn to runway.

F. Contractor shall furnish and install one inch (1”) PVC with three (3) #6 and one (1) #10 ground from building to runway edge.

G. Contractor shall set N3R J box and convert to one inch (1”) Electrical Metallic Tubing (EMT).

H. Contractor shall furnish and install up to forty-five feet (45’) of heavy duty protector (Referenced Brand (must be equivalent or better): Uline H6955) for new EMT raceway to new hanger.

I. Contractor shall furnish and install new heavy-duty rack (Referenced Brand (equivalent or better): Unistrut) for electrical service equipment.

J. Contractor shall furnish and install 60-amp, 600 volt, N3R MTS on new uninstructed rack.

K. Contractor shall furnish and install 30 kVA transformer, 480 volt - 120/240 volt.

L. Contractor shall furnish and install ground rod.

M. Contractor shall furnish and install two inch (2”) liquid-tight raceway (Referenced Brand:

(must be equivalent or better) Seal-Tite) with four (4) #3 THHN and one (1) #6 ground from transformer to customers panel at hanger.

Page 12 of 27 Approved 10/16/2021

N. Contractor shall label new circuit, energize and test for proper operation.

C.2.2 General Requirements

A. Contractor must perform a pre-work walk-through of entire job site with the TMD Project Manager to verify current conditions before any work begins.

B. Photographs during the pre-work walk-through will only be permitted with preapproval from the TMD Project Manager.

C. Contractor must provide the number of calendar days to perform the work from notice of award to Substantial Completion at the bid time with their proposal (Attachment G.3).

D. Normal working hours are Tuesday through Friday, 7:30 am to 5:00 pm.

E. Contractor must provide full-time, on-site, supervision whenever work is performed.

F. Contractor must provide the name of the full-time, on-site, supervisor in writing, to the

TMD Project Manager before work begins each day.

G. Contractor provided supervisor must be a direct employee of the awarded contractor.

H. Contractor must provide a qualified superintendent with five (5) years of experience.

I. Contractor must coordinate with the TMD Project Manager for approval prior to assigning a new superintendent that was not previously listed in the bid submission. Certificate of qualifications must be provided in writing.

J. Contractor must ensure that all items, and debris, that require disposal are removed from the site and are disposed of in accordance with all Federal, State, and local laws, rules, and regulations.

K. Contractor must provide daily cleanup.

L. Contractor must keep a clean and safe work area at all times.

M. Contractor must mitigate/isolate dust in work area at all times.

N. Contractor must ensure all rules, laws, and regulations are followed when transporting and disposing of any items generated from the statement of work.

O. Contractor must ensure that TMD has first rights to any salvageable materials.

P. TMD Project Manager will coordinate with TMD Recycling for the pick-up of the recyclables.

Q. Contractor must always enforce Personal Protective Equipment (PPE) requirements.

R. Contractor must provide a written list of at least three (3) names and 24-hour contact numbers to the TMD Project Manager and have a written copy visible on site at all times.

Page 13 of 27 Approved 10/16/2021

S. Contractor must provide protection to existing assets.

T. Contractor must protect all existing improvements, road surfaces, curbs, sidewalks, trees, shrubbery, sprinkler systems, drainage structures, and other like items to prevent damage.

U. Contractor must repair any damage caused by any work provide in the performance of this scope of work at the expense of Contractor.

V. Contractor must maintain access on adjacent roads for traffic.

W. Contractor must provide traffic signage, flagmen, and other safety items to ensure the safety of workers and the host site occupants.

X. Contractor must provide a written notification of any interruption of services to adjacent buildings to the Program Manager with-in 72-hours of discovery.

Y. Contractor must coordinate with the TMD Project Manager for written approval locations to place Contractor provided porta-potties.

Z. Contractor must provide one (1) porta-pottie for Contractor’s workers and provide location to the TMD Project Manager.

AA. Contractor must ensure Contractor caused damage to other areas is returned to its previous condition.

BB. Contractor must ensure any subcontracted trades, such as plumbing or electrical contractors, provide license copies to the TMD Project Manager before they perform any work.

CC. Contractor must provide written notification to TMD’s Project manager when the work is complete and provide a preferred date that the Contractor must be prepared for a Substantial Completion Inspection.

DD. TMD’s Project Manager shall inspect the work and provide the contractor with a list of deficiencies (Punch List) that the contractor must remedy within 7 days.

EE. Contractor must notify TMD’s Project Manager, in writing, when the Contractor is ready for a Final Inspection.

FF. TMD is not responsible for any additional work the contractor completes that has not been approved by the Contract Administrator in the form of a change order.

C.3 DELIVERABLES

Delivery is to be turn-key, all labor, equipment, supplies and materials to be included.

Page 14 of 27 Approved 10/16/2021

C.4 ACCEPTANCE CRITERIA

In determining the best value, TMD shall consider the following best value factors:

A. Price of the item, to include total cost of ownership, such as, but not limited to, installation costs, life cycle costs, and warranty provisions.

B. Compliance with the stated specifications coupled with the quality and reliability of the goods and services, such as, but not limited to, fitness for use that meets or exceeds Customers expectations and the characteristics of the product or service that bear on its ability to meet the stated/implied needs.

C. Delivery timeframe from receipt of purchase order, after receipt of order (ARO).

D. Indicators of probable performance under the Contract to include, but not limited to past vendor performance; financial resources; ability, capacity, and skill to perform the Contract or provide the serviced required; experience or demonstrated capability and responsibility;

references; and the vendor’s ability to provide reliable maintenance agreements and support.

E. Other relevant factors, such as, but not limited to, the vendor’s ability to comply with laws relating to the goods or services, the vendor’s anticipated economic impact to the State or a subdivision of the State, including potential tax revenue and employment, the effect of a purchase on agency productivity, and the cost of any employee training associated with the purchase.

C.5 TMD PERSONNEL

C.5.1. TMD’s Contract Administrator

A. The Contract Administrator for the Contract is Robert Black.

B. The telephone number for the Contract Administrator is 512-782-5425.

C. The email address is Procurement@military.texas.gov

The Contract Administrator is responsible for the general administration of the Contract, negotiation of any changes, and issuance of written amendments to the Contract.

C.5.2 TMD’s Project Manager

A. The Project Manager for the Contract is Stuart Gurney.

B. The telephone number for the Project Manager is 512-987-0732.

C. The email address is Stuart.A.Gurney.nfg@army.mil

TMD’s Project Manager for the Contract is responsible for the overall management and coordination of the Contract and will act as the central point of contact for TMD. The Project Manager has full authority to act for TMD in the performance of any project

Page 15 of 27 Approved 10/16/2021 connected to the Contract. The Project Manager or a designated representative will meet with Contractor’s Project Manager to discuss problems as they occur.

C.6 INSURANCE REQUIRED UNDER THE CONTRACT

In its response, Respondent must provide a statement of its intent to obtain and maintain for the term of the Contract (and any renewal periods or additional extensions) the minimum insurance coverage specified. Respondent should also describe other insurance coverage maintained by Respondent in the ordinary course of business and provide proof of same in its response. Proof of insurance and bond coverage may be provided in the form of current certificates of insurance. TMD and the State of Texas do not accept “self-insurance” coverage.

The awarded Contractor is required, within five (5) business days of Notice of Award or Purchase Order, to provide TMD with current certificates of insurance or other proof acceptable to TMD.

Failure to submit acceptable proof of insurance within such time period may result in TMD’s revocation of the award. Contractor must maintain the required insurance during the initial term and any optional renewal period exercised. Contractor is responsible for ensuring its subcontractors’ compliance with all insurance requirements.

Minimum Required Amounts of Insurance Coverage Type of Insurance Each Occurrence/Aggregate Workers’ Compensation Statutory Limits for the State of Texas or for any state Contractor’s employee resides in Employer’s Liability Bodily Injury by Accident Bodily Injury by Disease Bodily Injury by Disease

$1,000,000 Each Accident $1,000,000 Each Employee $1,000,000 Policy Limit

Commercial General Liability (occurrence based)

Bodily Injury and Property Damage $1,000,000 Each Occurrence Limit $2,000,000 Aggregate Limit $2,000,000 Products/Completed Operations Aggregate Limit $1,000,000 Personal Injury and Advertising Liability $50,000 Damage to Premises Rented $5,000 Medical Payments

Automobile Liability All Owned, Hired and Non-Owned Vehicles

$500,000 Combined Single Limit (for each accident)

Umbrella/Excess Liability $1,000,000 Per Occurrence Commercial Crime $50,000 Each Occurrence

All required insurance coverage must be issued from a company or companies with a Financial Strength Rating of “A” or better from A.M. Best Company, Inc.

All insurance policies for required coverage must be issued by companies authorized to do business under the laws of the State of Texas and in a form satisfactory to TMD. All required insurance contracts must:

Page 16 of 27 Approved 10/16/2021

(1) be written on a primary and non-contributory basis with any other insurance coverages Respondent currently has in place; and

(2) include a Waiver of Subrogation Clause.

All certificates of insurance for required coverage other than workers’ compensation and professional liability must name the Texas Military Department as additional insured.

Contractor shall:

A. provide written documentation under this section to the Contract Administrator by email at least 30 calendar days prior to any cancellation, non-renewal, or material change of a required policy.

B. ensure all insurance policies and certificates of insurance for required coverage are written to include all products, services, and locations related to Contractor’s performance under the Contract; and

C. deliver all renewals policies at least ten calendar days prior of any expiration of a required policy to Contract Administrator by emails. All renewal policies and corresponding certificates of insurance must meet all terms set forth in the Contract.

D. ensure that all provisions of the Contract concerning liability, duty, and standard of care, together with the indemnification provision, are underwritten by contractual liability coverage sufficient to include the Contractor’s obligations under the Contract.

E. obtain and maintain insurance policies that provide coverage for Contractor’s principals, officers, directors, shareholders, partners, owners, agents, employees, subcontractors, independent contractors, and any other representatives who may provide services under the Contract.

C.7 UNIFORM GENERAL CONDITIONS FOR CONSTRUCTION PROJECTS

The Contract incorporates by reference the Texas Facilities Commission’s Uniform General Conditions (UGC) in its current version and as may be subsequently amended. The UGC may be viewed at http://www.tfc.state.tx.us/divisions/facilities/prog/construct/formsindex/.

C.8 Identification

All workers will need two (2) forms of identification. Acceptable forms of identification include state issued identification (i.e. Drivers’ License), Passport, Social Security Card, or other United States Government issued photo identification (i.e. FEMA Contractor card issued by U.S.

Government).

Page 17 of 27 Approved 10/16/2021

SECTION D—CONTRACT COMPLIANCE REPORTS AND DATA

Contractor must submit the reports and all additional Contractor documentation requirements in this section during the course of the Contract. These deliverables may be revised or additional ones may be required at TMD’s sole discretion.

FREQUENCY DUE DATE REPORT ITEM AUTHORITY TMD PERSONNEL TO

RECEIVE REPORT

Other

Prior to Execution of Contract and upon renewal or replacement

Insurance Requirements IFB, Section C.6

Contract Administrator

Upon Completion

Invoicing – Specific to the Contract IFB Section B.2

Payables@military.texas.gov with a copy to Contract Monitor

Page 18 of 27 Approved 10/16/2021

SECTION E—INSTRUCTIONS, CONDITIONS, AND NOTICES TO RESPONDENTS

E.1 RESPONSE PREPARATION INSTRUCTIONS

Purpose of Instructions

A. These instructions are designed to assure the submission of information essential to the understanding and the comprehensive evaluation of Respondent’s response.

B. Responses must be prepared in accordance with these instructions providing all required information in the format specified.

C. Failure of a response to show compliance with these instructions and submit all documentation may be grounds for disqualification of the response from further consideration unless stated otherwise within this solicitation.

Submission of responses

A. Responses will be typed, paginated, contain a full table of contents, and have component sections clearly identified bookmarks.

B. Responses must be received by TMD no later than the deadline established and submitted to:

Texas Military Department Procurement and Contract Services Procurement@military.texas.gov Subject: Solicitation No. TMD25-FMO-0036466

C. Respondent must demonstrate that Respondent’s operations conform to applicable TMD, state, and federal policies and standards.

D. Respondent must submit only material directly pertinent to the requirements of this solicitation. Extraneous narrative, elaborate brochures, uninformative public relations material, including Respondent’s policies, procedures, and post orders for which no deviation to TMD Policy is being requested, and other similar documents will not be submitted.

E.2 AMENDMENTS TO THE SOLICITATION

A. If this solicitation is amended all terms and conditions which are not modified remain unchanged.

B. Respondents must acknowledge receipt of all amendment(s) to this solicitation by signing and returning the amendment(s), identifying the amendment number and date in the space provided for this purpose on the form for submitting a response or by letter.

C. Respondent must submit the acknowledgement to TMD by the time specified for receipt of responses.

D. Failure to acknowledge amendment(s) by Respondent may subject its response to rejection.

Page 19 of 27 Approved 10/16/2021

E.3 LATE SUBMISSIONS, MODIFICATIONS AND WITHDRAWALS OF RESPONSES

A. Responses will be time stamped at the office designated in the solicitation on or before the date and time specified in this solicitation.

B. Any response received at the designated location after the specified date and time will not be considered.

C. Responses cannot be altered, amended, or modified after closing date and time.

D. Alterations made before closing time will be initialed by Respondent or its authorized representative.

E. No responses can be withdrawn after closing date and time without approval by TMD. Should a Respondent, after closing time, request its response be withdrawn, the request must be made in writing.

F. TMD is not responsible for submissions delivered to TMD after the date and time stated on the first page of this solicitation. It is the Respondent’s responsibility to ensure that it submits, and that TMD receives, its complete response timely. TMD recommends that Respondent submit their complete response well in advance of the due date and time stated on the first page of this solicitation.

G. TMD takes no responsibility for electronic responses that are captured, blocked, filtered, quarantined, or otherwise prevented from reaching the proper destination server by any TMD anti-virus or other security software.

E.4 SIGNATURES ON RESPONSE SUBMITTED

A. Responses from a partnership will be signed in the firm name by at least one (1) general partner or in the firm name by an attorney-in-fact.

B. Responses signed by an attorney-in-fact, will include a Power of Attorney evidencing the authority to sign response, dated and executed by all partners in the firm.

C. Responses from a corporation will have the correct legal corporate name and the signature of an authorized officer of the corporation.

D. The title of office held by the person signing for the corporation will appear below the signature of the officer.

E. Responses from an individual doing business under a firm or fictitious name will be signed in the same name of the individual doing business under the proper firm name.

F. Joint venture responses will be signed by all members or by a member of the joint venture if there is attached to the response a copy of the joint venture agreement evidencing that the response is signed by the member with authority to bind the joint venture.

Page 20 of 27 Approved 10/16/2021

E.5 RESPONSE ACCEPTANCE PERIOD

A. All responses will be valid for 120 days after the solicitation opening date and will constitute an irrevocable response to TMD for the 120-day period.

B. Such period may be extended beyond the 120 days upon mutual written agreement of both parties.

E.6 CONTRACT AWARD

A. TMD may award one (1) Contract resulting from this solicitation to the responsible Respondent, whose response, is lowest price meeting specifications.

B. A purchase order mailed or otherwise furnished to successful Bidder(s) within the time for acceptance specified in the response will result in a binding Contract without further action by either party.

C. A Purchase Order shall be established in accordance with the specifications, terms and conditions referenced in IFB TMD25-FMO-0036466. The following documents shall be incorporated and made a part of this order and in the following order of precedence:

a. TMD PO 25-#####

b. TMD IFB TMD25-FMO-0036466

c. Vendor’s Response to IFB TMD25-FMO-0036466

D. The Contract shall consist of the Notice of Award; this Solicitation, including addenda; and the

Response, including clarifications submitted at the request of CPA. In the event of any conflict or contradiction between or among these documents, the Notice of Award, as modified by any Contract Amendments, controls over the Solicitation and the Response. The Solicitation, as modified by any Addenda, controls over the Response.

E.7 TMD’S RIGHTS

A. TMD reserves the right to waive, change, add or delete any terms or conditions of this solicitation.

B. TMD may:

1. reject any or all responses if such action is in the public interest;

2. accept other than the lowest priced response; and

3. waive minor informalities and minor irregularities in responses received.

C. Waiver of deviations in any response will not constitute a modification of this solicitation and will not preclude TMD from asserting all rights against the Respondent for failure to fully comply with all terms and conditions of this solicitation. Copyrighted responses are unacceptable and are subject to disqualification as non-responsive. TMD reserves the right to make any corrections or include additional requirements in the resulting Contract prior to issuance which are necessary for TMD’s compliance, as an agency of the State of Texas, with all state and federal requirements. TMD reserves the right to disqualify any response which asserts any copyright on any TMD-created form which is specifically designated by this

Page 21 of 27 Approved 10/16/2021 solicitation to be a form that will be completed and included in a response submitted in response to this solicitation.

D. TMD reserves the right to reject any one (1) response or all responses or portions of responses submitted in response to this solicitation.

E. The submission of a response has the effect of waiving proprietary rights or confidentiality.

F. All responses and any content provided by the Respondent are considered the property of TMD for use for the life of any resulting Contract as determined by TMD with respect to the scope of the project.

G. TMD is not liable for any costs or damages that may be incurred by Respondents or prospective Contractors in the preparation, formulation, or presentation of a response.

H. In case of ambiguity or lack of clarity, TMD may adopt such interpretations as may be advantageous to TMD.

I. TMD reserves the right to withdraw this solicitation at any time for any reason.

J. TMD reserves the right to award no Contract and to solicit additional responses at a later time.

K. TMD incurs no obligation regarding this solicitation unless and until a Contract is fully executed by the parties. However, all responses received by TMD will remain confidential until the evaluation process is complete.

L. TMD will not hold a public bid opening event.

E.8 RESPONSE SUBMISSION INSTRUCTIONS

E.8.1 Volume One – Contract Forms and Required Response Information

This section will contain the following completed Contract sections:

A. Solicitation, Page 1 (with amendment(s) noted on this page or signed amendment(s) attached to this form);

B. The name and address of Respondent’s insurance carrier(s), along with a statement of liability from the carrier(s) issuing the policies saying that such policies are available to Respondent. For the purpose of responding to this solicitation, Respondent will not be required to purchase insurance, but must show the ability to provide such insurance as specified in the section entitled “Insurance Requirements,” if Respondent’s response is selected.

C. A Redacted Solicitation and Contract response if applicable;

D. Attachment G.1, Direct Deposit Authorization Form, completed if choosing direct deposit as a possible payment option;

E. Attachment G.2, Application for Texas Identification Number;

Page 22 of 27 Approved 10/16/2021

F. Documentation from the appropriate state entity that indicates that Respondent is properly certified to conduct business in the State of Texas (e.g., The Certificate of Existence from the Texas Secretary of State and the Certificate of Account Status from the Comptroller of Public Accounts); and

E.8.2 Volume Two – Information Section

A. Cover Page: List name and address of Respondent, date of response, solicitation identifier, and signature of authorized official.

B. Information Sheet: Including all information required of Respondent and any subcontractors.

1. Name and address (including telephone number) of Respondent and all subcontractors.

2. Business form of Respondent and its subcontractors (e.g., corporation, partnership).

3. Date and state of incorporation.

4. Names and addresses of principal officers, directors, or partners.

C. The Respondent must specifically address, within its response, the following requests for information as detailed throughout this solicitation. TMD has endeavored to include a complete listing of such submittal requests; however, in the event TMD omitted a requirement, Respondent is responsible for ensuring that all such information is included within its response.

1. B.3, Pricing Schedule

2. C.6, Insurance

3. All required submittals under Section E.8.1, Contract Forms and Required response Information and Section E.8.2, Information Section.

D. Exceptions. No exceptions should be included in response. Bids received that take any exceptions to this solicitation will be disqualified and deemed non-responsive to the solicitation and TMD will remove the bid from further consideration.

E.8.3 Volume Three – Cost and Pricing Response

Respondent must provide updated pricing schedules in the exact format noted in Section B.3 of this solicitation.

E.9 DISCUSSION AND CORRESPONDENCE

A. All communications and questions concerning this solicitation, including any of a technical nature, will be made in writing only to:

Robert Black, CTCD, CTCM, Contract Administrator

TMD

Procurement and Contract Services

P.O. BOX 5218

Austin, Texas 78763-5218

Page 23 of 27 Approved 10/16/2021

Email: Procurement@military.texas.gov

B. Written responses to the questions will then be provided to all parties requesting copies of this solicitation through TMD’s Procurement and Contract Services.

C. Respondent should rely only on the written information provided in this manner. Respondent is specifically cautioned against relying on any oral information.

D. All Respondents are specifically barred from making contact with any TMD personnel involved in this solicitation for the purpose of discussing its responses.

E. Respondent may; however, seek clarifications of the solicitation through the written process described above.

F. Respondent is reminded that 02/14/2025 at 2:00 P.M. Central Time is the last day to submit written questions for clarification by TMD.

G. Unauthorized contact with TMD personnel by any Respondent may result in Respondent’s response being rejected in its entirety.

E.10 SUBMISSIONS SUBJECT TO THE TEXAS PUBLIC INFORMATION ACT

TMD is a governmental body subject to the Texas Public Information Act (PIA), Texas Government Code Chapter 552. The response and other information submitted to TMD by Respondent are subject to release as public information by TMD. The response and other submitted information is presumed subject to disclosure unless a specific exception to disclosure under the PIA applies.

If it is necessary for Respondent to include proprietary or otherwise confidential information in its response or other submitted information, Respondent must clearly label that proprietary or confidential information and identify the legal basis for confidentiality. Merely making a blanket claim that the entire response is protected from disclosure because it contains some proprietary information is not acceptable, and will make the entire response subject to release under the PIA.

In order to trigger the process of seeking an Attorney General opinion on the release of proprietary or confidential information, the specific provisions of the response that are considered by Respondent to be proprietary or confidential must be clearly labeled as described above. Any information which is not clearly identified by Respondent as proprietary or confidential will be deemed subject to disclosure under the PIA. Respondent will irrevocably deem to have waived, and Respondent agrees to fully indemnify the State of Texas and TMD against any claim of infringement by TMD regarding the intellectual property rights of Respondent or any third party for any materials appearing in the response.

E.11 AGENCY POSTING OF CONTRACTS

After award, information, documentation, and other material in connection with this solicitation or the Contract may be subject to public disclosure under the Public Information Act.

Without prior written notice to Respondent, the redacted response may be posted on TMD’s website as part of the Contract per Texas Government Code § 2261.253(a).

Page 24 of 27 Approved 10/16/2021

E.12 ANTICIPATED SCHEDULE OF EVENTS

TMD currently anticipates that the selection of successful Bidder and award of the Contract, if any, will proceed according to the anticipated schedule of event (on Page 2 of 27 of this solicitation).

TMD reserves the right, in its sole discretion, to change the above date(s). Notices of changes to items directly impacting the original solicitation process will be posted on the Electronic State Business Daily (ESBD) located at: https://www.txsmartbuy.gov/esbd. Respondent should check the ESBD frequently for updates. Respondent is solely responsible for verifying receipt of its questions, if applicable, and responding by the deadlines stated. A Respondent’s failure to periodically check the ESBD for updates will in no way release the awarded Respondent from compliance with any requirements in posted “addenda or additional information” although such compliance may result in additional costs to meet the requirements.

Questions regarding this solicitation must be in writing and must be submitted to TMD’s Contract Administrator by the date and time noted in the table listed in this solicitation. Telephone inquiries will not be accepted. Questions must be submitted by email. TMD intends to post answers to these questions on the ESBD on or before the date and time noted in the table listed in this solicitation.

Respondent is solely responsible for verifying TMD’s timely receipt of its questions by the stated deadlines.

E.13 SITE VISIT

Mandatory site visits will be held at Ellington Air Force Base, 14657 Sneider Street, Houston, TX 77034 at 10:00 A.M. and at 1:00 P.M. on 02/11/2025. Failure to attend one (1) of the two (2) site visits will result in disqualification of the response. State issued identification (i.e. Driver’s License) is required to access the site. The purpose of the site visit is to review the solicitation as well as answer any questions regarding completing and submitting the bid. There will be no technical questions answered at this conference.

Page 25 of 27 Approved 10/16/2021

SECTION F—EVALUATION CRITERIA

TMD will evaluate responses in accordance with the best value standard in Texas Government Code § 2156.007.

TMD reserves the right to conduct studies and other investigations as necessary to evaluate any bid.

TMD, in its sole discretion, may amend or modify any provisions of the IFB, or withdraw this IFB at any time prior to award of a Contract. TMD reserves the right, in its sole discretion, to reject any or all IFBs or to select one (1) or more qualified Respondents to this IFB without discussion of Bids with the respective Respondents.

The decision of TMD, or its designee with regard to the above, shall be administratively final. TMD, in its sole discretion, may waive administrative deficiencies and/or minor technicalities in Bids received.

TMD will not disclose any information regarding sealed IFBs to the public prior to Contract award.

Under the Freedom of Information Act (FOIA), Texas Public Information Act (TPIA)/Open Records, and Privacy Act (PA) the public may request Bids and information, after award, to the TMD at:

By mail to: Texas Military Department ATTN: Office of the General Counsel, JFTX-GC (FOIA Officer) P.O. Box 5218 Austin, TX 78763-5218

By email to: ng.tx.txarng.mbx.freedom-of-information-act@army.mil

By fax to: 512-782-6988 (ATTN: FOIA Officer)

If you need a special accommodation pursuant to the Americans with Disabilities Act (ADA) requirements, please contact our ADA Coordinator at 512-782-3385

Vendor Performance Data: TMD will consider a Respondent’s past performance in compliance with applicable provisions of Texas Government Code §§ 2155.074, 2155.075, 2156.007, 2157.003, and

2157.125 of the Government Code. The following examples indicate poor vendor past performance may affect a potential Contact award and will be considered during evaluation of Bids:

A score of less than a C in the Vendor Performance Tracking System;

Currently under a Corrective Action Plan through the Comptroller of Public Accounts (CPA) or TMD;

Repeated negative Vendor Performance Reports for the same stated reason;

A record of repeated non-responsiveness to Vendor Performance issues; or Cancellation of purchase orders in the previous 12 months for non-performance, such as late delivery.

Contractor performance information is located on CPA’s website at:

https://www.txsmartbuy.gov/vpts

Page 26 of 27 Approved 10/16/2021

TMD may conduct reference checks with other entities regarding past performance. In addition to evaluating performance through the Vendor Performance Tracking System, TMD may examine other sources of vendor performance including, but not limited to, notices of termination, cure notices, assessments of liquidated damages, litigation, audit reports, and non-renewals of contracts. Such sources of vendor performance may include any governmental entity, whether an agency or political subdivision of the State of Texas, another state, or the Federal government.

Further, TMD may initiate such examinations of vendor performance based upon media reports.

Any such investigations will be at the sole discretion of…