ESBD_366004_1719938690707_802-25-48474-R HVAC Water Treatment Services.pdf

INVITATION FOR BID – SERVICES

SEND INVOICE TO: RETURN BIDS TO BIDDER MUST SIGN BELOW

Texas Parks and Wildlife Department ATTN: Accounts Payable 4200 Smith School Road Austin, Texas 78744

Purchasing.BidBox@tpwd.texas.gov, FAX 512-389-4677, or return to:

TPWD - Purchasing and Contracting

4200 Smith School Road Austin, Texas 78744

BID DUE DATE 2:00 PM July 23, 2024

REQUISITION NO. 802-25-48474-R

By signing this bid, bidder certifies that if a Texas Address is shown as the address of the bidder, bidder qualifies as a Texas bidder as defined in Title 34 TAC Rule 20.32(68).

FAILURE TO MANUALLY SIGN THE BID ABOVE WILL DISQUALIFY BID.

AWARD NOTICE: The State reserves the right to make an award on the basis of low line item bid, low total of line items, or in any other combination that will serve the best interest of the State and to reject any and all bid items in the sole discretion of the State.

Item Description Class/Item 962-23, 910-36 Quantity Unit of Measure

Unit Price Extension

Texas Parks and Wildlife Department (TPWD) is soliciting bids to establish a blanket contract for Water Treatment Services for the heating, air conditioning, and hot and chill water systems at the TPWD Headquarters building, 4200 Smith School Road, Austin, Texas 78744 per the attached scope of work dated July 2024.

Initial Contract term: September 1, 2024 through August 31, 2026. Option to renew for one (1) additional two-year term.

NOTICE TO BIDDERS: MANDATORY PRE-BID SITE INSPECTION

Bidders are required to attend a mandatory pre-bid site visit to inspect the work site to become familiar with the condition and equipment needed to conduct the requested services. Failure to attend one of the mandatory site visits will result in disqualification of bid.

The mandatory pre-bid site visits will be held July 16, 2024 10:00 a.m. and July 17, 2024 10:00 a.m. at TPWD Headquarters Building. Bidders are required to attend one of these visits.

TPWD Site Visit Contact Phillip Torres, 512-389-8050 or phillip.torres@tpwd.texas.gov.

1. Monthly rate for all services, materials, equipment, labor and any other incidentals required to successfully perform HVAC water treatment services described herein.

24 MONTH $

(Monthly lump sum fee for all required services)

(Monthly rate x 24 months)

Offered by a Historically Underutilized Business certified by CPA.

AUTHORIZED SIGNATURE DATE

SHOW BID OPENING

DATE AND REQUISITION

NUMBER ON SEALED BID

ENVELOPE AND SHOW

RETURN ADDRESS OF FIRM

BIDDER AGREES TO

COMPLY WITH ALL

CONDITIONS OF THIS BID.

BID F.O.B. AGENCY RECEIVING ROOM

UNLESS OTHERWISE SPECIFIED BELOW

DESTINATION IF DIFFERENT THAN ABOVE

Texas Parks & Wildlife Department Headquarters Building 4200 Smith School Road Austin, Texas 78744

See instructions for Texas ID Number in General Terms & Conditions, Paragraph 1.10.

Bidder Must Fill in

TEXAS ID NUMBER

Name of Firm

Street Address

City–State-Zip

Telephone No.

Email address

FAILURE TO

MANUALLY

SIGN WILL

DISQUALIFY BID

IFB No. 802-25-48474-R Page 2 of 37

IFB_Services_042023

PREFERENCES: See Appendix 21 of the State of Texas Procurement and Contract Management Guide regarding preferences.

Check below to claim a preference under Title 34 TAC Rule 20.38

□ Goods produced or offered by a Texas bidder that is owned by a Texas resident service-disabled veteran

□ Goods produced in Texas or offered by a Texas bidder that is not owned by a Texas resident service-disabled veteran

□ Agricultural products grown in Texas

□ Agricultural products offered by a Texas bidder

□ Services offered by a Texas bidder that is owned by a Texas resident service-disabled veteran

□ Services offered by a Texas bidder that is not owned by a Texas resident service disabled veteran

□ Texas Vegetation Native to the Region

□ USA produced supplies, materials or equipment

□ Products of persons with mental or physical disabilities

□ Products made of recycled, remanufactured, or environmentally sensitive materials including recycled steel

□ Energy Efficient Products

□ Rubberized asphalt paving material

□ Recycled motor oil and lubricants

□ Products produced at facilities located on formerly contaminated property

□ Products and services from economically depressed or blighted areas

□ Vendors that meet or exceed air quality standards

□ Recycled or Reused Computer Equipment of Other Manufacturers

□ Foods of Higher Nutritional Value

FOR FURTHER INFORMATION CONTACT PURCHASER:

JUDY AHRENS, CTCD CTCM- PHONE 512-718-3703

Email: purchasing.bidbox@tpwd.texas.gov

IFB No. 802-25-48474-R Page 3 of 37

Solicitation 802-25-48474-R

Specifications for HVAC Water Treatment Services

1) INTRODUCTION: Texas Parks and Wildlife Department (TPWD) is soliciting bids to establish a blanket contract for Water Treatment Services for the heating, air conditioning, and hot and chill water systems at the TPWD Headquarters building, 4200 Smith School Road, Austin, Texas 78744 per the following Scope of Work.

2) TERM OF CONTRACT: Contract shall commence September 1, 2024 or upon date of award (whichever is later) and continue through August 31, 2026 unless sooner terminated under the terms of this contract.

a) Contract Renewals: This contract may be renewed for up to one (1) additional two (2) year period, provided both parties agree in writing to do so, based on funds availability and vendor performance. Any extension shall be at the same terms and conditions, plus any approved changes. If the contract is extended under this option, the contractor shall be given written notification of the period in which the services shall occur after being determined by the TPWD.

b) Contract Extensions: In the event that the contract(s), if any, resulting from the award of this IFB shall terminate or be likely to terminate prior to the making of an award for a new contract for the identified products and/or services, TPWD may, with the written consent of the awarded supplier(s), extend the contract for a period of time as may be necessary to permit TPWD continued supply of the identified products and/or services (not to exceed twelve month extension period). Any extensions shall be at the same terms and conditions, plus any approved changes.

3) ANNUAL ESCALATION: a price escalation may be allowed each contract year with an approved justification upon mutual agreement of both parties. TPWD reserves the right to accept the proposed price, to propose an alternate price, or to terminate the contract for convenience.

4) MANDATORY PRE-BID SITE INSPECTION: Bidders are required to attend a mandatory pre-bid site visit to inspect the work site to become familiar with the condition and equipment needed to conduct the requested services. Failure to attend one of the mandatory site visits will result in disqualification of bid.

a) The mandatory pre-bid site visits will be held July 16, 2024 10:00 a.m. and July 17, 2024 10:00 a.m. at the TPWD Headquarters Building. Bidders are required to attend one of the visits.

b) TPWD Site Visit Contact is Phillip Torres, 512-389-8050, phillip.torres@tpwd.texas.gov.

c) Note: Attendees should be prepared to tour the site by foot with proper clothing and footwear.

5) PROJECT SCOPE OF WORK: Contractor shall furnish all labor, materials, chemicals, equipment, and supervision for water treatment services for the heating, air conditioning, and hot and chill water systems at Texas Parks and Wildlife Headquarters Complex. The water treatment program will include all HVAC water systems, all cooling towers, all hot water loops, and all chilled water loops. In addition, the water treatment program will include all chemical products, any required equipment, and services to accomplish the following:

a) Program Requirements: The water treatment program will provide scale and corrosion protection for condenser water systems, cooling towers, chillers and chilled water systems, steam boilers, condensate lines, and closed hot water loops, while maximizing efficiency and performance.

b) Excluded Services: Bidders shall provide a list of services excluded contract services in Exhibit E, Excluded Services and Parts.

c) Excluded Parts: Bidders shall provide a list of excluded parts in Exhibit E, Excluded Services and Parts

IFB No. 802-25-48474-R Page 4 of 37

d) Heating and Cooling System: Description of TPWD heating and cooling system is shown in Attachment 1 and Attachment 2.

e) Chemical Product Specifications: Chemical specifications for water treatment are specified in Attachment 3.

i) TPWD shall provide a list of all materials contained in the heating and cooling system.

ii) Contractor shall ensure that chemicals used in the water treatment program shall have no detrimental effect on the metallic or non-metallic materials in equipment being treated.

f) Work Schedule:

i) Services to be provided during normal business hours, 8:00 a.m. to 5:00 p.m. Monday through Friday.

ii) Services to be provided two (2) times per month during the first and third weeks of each month on days to be mutually agreed upon by Contractor and TPWD.

g) Program Administration: Contractor shall provide an Administration Notebook, containing at a minimum:

i) Chemical program outline

ii) Chemical control test procedures

iii) Log Sheets to be updated after each service

iv) Material Safety Data Sheets

v) Feed and Control equipment specifications

vi) Service reports

h) Training: Contractor shall provide a summary of training for TPWD staff to include test performance, monitoring results, working safely with chemical products and general training regarding the boiler and cooling system.

i) Test Results: Contractor shall provide TPWD with test results within three (3) business days of test completion in a manner to be mutually agreed upon between TPWD and the Contractor.

j) Required Tests: The following tests shall be performed during each service.

i) Conductivity

ii) PH

iii) Alkalinity

iv) Calcium Hardness

v) Chlorine

vi) Iron

vii) Copper

viii) Free Chlorine

ix) Inhibitor

k) Required Treatments: Contractor shall provide a chemical distribution system capable of the following:

i) Inhibitor and dual biocide chemicals shall be fed through the chemical system.

ii) System shall monitor and control chemical distribution.

IFB No. 802-25-48474-R Page 5 of 37

iii) System shall include a remote capable controller with alarms and graph charts.

iv) Contractor shall provide inspection and repair of the chemical distribution system as needed.

l) Efficiency Monitoring: Contractor shall provide capacity for on-site computer analysis of energy efficiency.

i) Boiler efficiency, overall chiller efficiency, condenser efficiency and evaporator efficiency shall be provided a minimum of one (1) time per quarter.

m) On-Site Microbiological Testing: Contractor shall have the capability to quantitatively determine organism levels within thirty (30) minutes of taking a water sample.

n) Equipment Inspection: Contractor shall provide a written statement of the condition of equipment for all equipment made available for inspection. The Contractor must also provide Texas Parks and Wildlife with photographs of equipment internals for each inspection. All equipment will be made available for inspection within three (3) months of Contract award.

i) Cooling Tower Inspection: Shall be performed during each service visit and inspection shall include at a minimum:

(1) Biological growth

(2) Foam

(3) Sludge cooling tower deterioration

ii) Boiler/Chiller Inspection: Contractor shall inspect the boilers and chillers annually during the month of November.

(1) Contractor shall be provided a two (2) week notice prior to upcoming inspection period.

(2) Contractor shall visually inspect and photograph equipment internal components.

(3) Contractor shall provide an ongoing record with photographs within three (3) business days of completion.

o) Corrosion Studies: Contractor shall conduct an ongoing study of system corrosion using a corrosion coupon and corrosion rack placed on open and closed cooling and hot loop.

i) Contractor shall report study results quarterly during the months of January, April, August and December.

More frequent results may be required in the event of corrosion issues.

p) Water Conservation: Contractor shall maximize cycles of concentration in both boilers and cooling towers to minimize water consumption.

i) Contractor shall provide TPWD with three (3) spare filters for each bypass feeder filter.

ii) Contractor shall clean system of scale or algae during the term of the contract at no additional cost.

q) Idle Systems: Contractor shall be responsible for treatment dosages and methods for protecting idle systems (example: laying up boilers during summer months and laying up air conditioning systems during winter months).

r) Troubleshooting and Repair Service:

i) Contractor shall have laboratory facilities capable of providing monitoring, control and troubleshooting.

(1) Corrosion coupon analysis

(2) Analex cartridge analysis

IFB No. 802-25-48474-R Page 6 of 37

(3) Fuel oil analysis

(4) Metallurgical analysis

ii) Contractor shall provide maintenance and emergency repair service for the chemical distribution system and shall respond within twenty-four (24) hours of TPWD notification.

6) EQUIPMENT:

a) All equipment, materials and parts not specifically mentioned which are necessary for the completion of work must be furnished by the Contractor.

b) Describe all equipment and vehicles to be used for this project in Exhibit B –Equipment List. Make sure to include dimensions/capacities of equipment, make, model, horsepower and intended use by bid item. For purposes of this bid evaluation TPWD assumes that the respondent’s equipment list, includes ALL of the equipment that the respondent is dedicating to this project and has considered in this bid. All equipment, materials and parts not specifically mentioned which are necessary for the completion of work must be furnished by the vendor.

c) All equipment shall be in safe working order and have appropriate safety equipment installed and intact per manufacturer recommendations.

d) All other areas of the TPWD Property are closed and off limits to the contractor and their employees. Only those personnel critical to the completion of this project will be allowed on the premises. No pets will be allowed.

7) MINIMUM QUALIFICATIONS:

a) A contract shall be awarded ONLY to a contractor who is experienced in providing the services contained herein. Awarded contractor shall meet the following minimum qualifications:

b) Shall have been engaged in the business of providing the specified services for a minimum of three (3) years.

Recent start-up businesses do not meet the requirements of this solicitation.

c) Complete Exhibit A – Company Profile, and Exhibit C - Past Projects with Corresponding References, and return with bid.

d) References must be verifiable by phone or email within ten (10) working days of bid evaluation.

i) Note: A start up business is defined as a new company that has no previous operational history or expertise in the relevant business and is not affiliated with a company that has that history of expertise.

8) CRIMINAL BACKGROUND CHECKS:

a) Contractor represents and warrants that Contractor and Contractor’s employees performing services outlined in this solicitation and subsequent contract, have not been convicted of a felony criminal offense, or that, if such a conviction has occurred, Contractor has fully advised TPWD as to the facts and circumstances surrounding the conviction.

b) Contractor’s employees and subcontractors that will complete any services described herein will be subject to a criminal background check. A complete criminal background check shall be completed by TPWD before any employee performs services and may be requested at any time thereafter.

c) TPWD reserves the right to waive any findings that do not impact the successful completion of the project

IFB No. 802-25-48474-R Page 7 of 37 and/or safety of TPWD staff or that of the public. It is TPWD’s sole discretion to determine potential impact or risk.

9) CONTRACTOR REQUIREMENTS:

a) Contractor shall provide a twenty-four (24) hour, seven (7) day per week emergency phone number to obtain emergency information regarding chemical spills or accidents.

b) Contractor shall appoint one project manager and one alternate. The project manager (or alternate) shall communicate project requirements and issues with TPWD.

i) The project manager and alternate shall be full-time Contractor employees and shall be experienced in all aspects of water treatment.

c) Contractor is responsible for all materials and equipment stored at the work site.

d) Contractor is responsible for the prompt removal of all debris, litter, and rubbish regularly throughout the project.

e) Contractor shall be solely responsible for the safe operation of all equipment used and for the safety of all personnel employed by or under contract to the Contractor.

f) Contractor shall be solely responsible for any damage attributable to Contractor’s operation. Contractor, at their own expense, shall repair any such damage immediately. The repair work is subject to acceptance by

TPWD.

g) Contractor shall provide all labor, equipment, supervision, and any other necessary and incidental materials to complete the project.

h) Contractor is responsible for any and all clean-up caused by the operation.

i) When servicing equipment on site, waste oil and other fluids shall be drained into containers and properly disposed of in accordance with appropriate waste disposal practices. The Contractor shall immediately clean up any spillage of waste materials.

j) Contractor shall be solely responsible for maintaining safety at all work sites. Contractor shall take all reasonable steps to ensure safety for both workers and the public, including traffic control.

10) PERFORMANCE MEASURES:

a) Contractor will be responsible for the performance of any contractual obligations that may result from an award based on this IFB and shall not be relieved due to non-performance of any or all subcontractor(s). By submitting a proposal, the Respondent commits to providing the goods and services required in the IFB. The successful Respondent(s) will be required to abide by TPWD policies, procedures, standards, and guidelines relevant to the execution of this contract.

b) TPWD will measure and evaluate the Contractor’s and/or subcontractor’s performance under the contract. If the Contractor or subcontractor does not meet any standards for deliverables and/or performance incentives (if applicable), TPWD may impose remedies if the Contractor or subcontractor(s) fails to meet their responsibilities as outlined in the IFB and the terms and conditions of the contract. All services and deliverables under the contract shall be provided at an acceptable quality level and in a manner consistent with acceptable industry standards, customs, and practices. In the event TPWD deems that the Contractor’s performance does not meet an acceptable quality level of service and deliverables, TPWD may seek or negotiate remedies with the Contractor.

c) TPWD will monitor vendor performance. Failure to provide services in accordance with requirements specified herein and the resulting contract(s) and adherence to the TPWD Terms and Conditions may be considered, by TPWD, as unsatisfactory performance by the contractor. An unsatisfactory performance may result in a

IFB No. 802-25-48474-R Page 8 of 37 negative vendor performance report, or cancellation of the contract or both.

11) TPWD RESPONSIBILITIES:

a) TPWD will designate a Contract/Project Manager upon contract award.

b) TPWD will furnish no material, labor, equipment, or facilities unless otherwise provided for in this contract.

12) SAFETY: ALL EQUPMENT USED ON GOVERNMENT PROPERTY WILL BE IN ACCORDANCE WITH

O.S.H.A. REGULATIONS. ALL SAFETY EQUIPMENT WILL BE USED AT ALL TIMES WHEN OPERATING

EQUIPMENT ON GOVERNMENT PROPERTY.

13) ADDITIONAL SERVICES: Where found to be in the best interest of TPWD, this contract may be amended in writing to provide additional services, provided that such additional services are within the original scope and intent of the contract. For example, additional clearing services are needed during the term of contract. In such cases, the contractor shall provide a written quotation for performing the additional work. TPWD contracting section will execute an amendment for additional services, no additional services shall be performed without a fully executed amendment to the contract.

14) QUANITIES: Quantities listed are projected order quantities. TPWD reserves the right to increase or decrease quantities prior to award depending on bid results and budget constraints. Unless this solicitation document states otherwise, the resulting contract award does not guarantee volume or commitment of funds. TPWD will only pay for actual goods received or services performed.

15) INSURANCE:

a) Contractor shall procure and maintain during the entire period of their performance under this contract the following minimum insurance.

Type of Insurance Each Occurrence/Aggregate

Workers Compensation Statutory

Employer's Liability Bodily Injury by Accident Bodily Injury by Disease Bodily Injury by Disease

$500,000 Ea. Accident $500,000 Ea. Employee $500,000 Policy Limit

Commercial General Liability General Aggregate Applies Per Project

$500,000 Bodily Injury & Property Damage - Each Occurrence $1,000,000 Aggregate Limit $5,000 Medical Expense Each Person $500,000 Personal Injury & Advertising Liability $1,000,000 Products / Completed Operations Aggregate Limit

Automobile Liability All Owned, Hired and Non-Owned Vehicles

$500,000 Combined Single Limit

Note: Workers’ Compensation is required by an "employer" which is defined as "a person who employs one or more employees." If respondent has no employees, such insurance is not required. If respondent claims they have no employees, TPWD will require a statement to that fact.

b) Policy must contain an additional insured endorsement: The State of Texas, acting through Texas Parks and Wildlife Department and its officers and employees, is listed as an additional insured and loss payee.

c) Prior to the commencement of the job and not later than ten (10) days following award, the Contractor shall furnish to TPWD, for approval, a certificate of insurance as proof that the required insurance is in full force and effect.

IFB No. 802-25-48474-R Page 9 of 37

d) The certificate of insurance shall be sent to: Judy Ahrens / Purchasing & Contracting, Texas Parks & Wildlife Department, 4200 Smith School Road, Austin, Texas 78744; or may be faxed to 512-389-4677.

16) INQUIRIES:

a) CONTACT: All requests, questions, or other communications about this Solicitation shall be made in writing to TPWD’s Purchasing Department, addressed to the following person:

Judy Ahrens, Purchaser Phone 512-718-3703 Texas Parks & Wildlife Department Fax 512-389-4677

Smith School Road, Austin, Texas 78744 Purchasing.BidBox@tpwd.texas.gov

b) CLARIFICATIONS: TPWD will allow written requests for clarification of this Solicitation. Questions may be faxed or e-mailed to the point-of-contact listed above. Questions should be submitted in the following format:

a) Reference the Solicitation number; b) Reference the Section number, Page number, Paragraph number, and Text of passage being questioned; and c) Question.

c) PROHIBITED COMMUNICATIONS: Upon issuance of this solicitation, TPWD, its representative(s), or partners will not answer questions or otherwise discuss the contents of this Solicitation with any potential Respondent or their representative(s), except for the written inquires described in Section (b) above.

Attempts to ask questions by phone or in person will not be allowed or recognized as valid. Failure to observe this restriction may disqualify Respondent. Respondent shall rely only on written statements issued through or by TPWD’s purchasing staff. This restriction does not preclude discussions between affected parties for the purposes of conducting business unrelated to this solicitation.

17) DELIVERY AND ACCEPTANCE:

d) Project Completion Delays: If delay is foreseen, Contractor shall give written notice to TPWD. Default in promised Completion without accepted reasons or failure to meet specifications authorizes TPWD to purchase services of this contract elsewhere and charge any increased costs for the services, including the cost of re-soliciting, to the Contractor.

e) Acceptance: All services performed will be subject to acceptance inspection upon completion. Acceptance inspection will not take more than five (5) working days, weather permitting. Vendor will be notified within this time frame of any units not delivered in full compliance with the purchase order specifications.

18) BID RESPONSE INSTRUCTIONS:

a) Bid Submission:

i) Submission Deadline: All bids shall be received, and time stamped at TPWD prior to 2:00 PM Central Time on the “Bid Opening” date specified on the IFB Cover Page (page 1). Late bids will not be considered under any circumstance and will be returned.

ii) General Format: Respondent shall submit bid response, signed dated and completed.

iii) Bid Delivery: Bids may be returned via email to Purchasing.BidBox@tpwd.texas.gov, mail, hand-delivery or fax to 512-389-4677.

iv) Bids returned by mail or hand delivery should be placed in a sealed envelope and correctly identified with IFB number, submittal deadline/opening date and time. Bids returned by fax should include a fax cover sheet correctly identified with IFB number, submittal deadline/opening date and time. It is the Bidder’s responsibility to appropriately mark and deliver the bids to TPWD by the specified date.

IFB No. 802-25-48474-R Page 10 of 37

v) Respondents are responsible for all costs of bid preparation.

b) Bid Content: Below is a summary of required and requested information. Bids submitted without this information will be evaluated accordingly. TPWD reserves the right, in its sole judgment and discretion, to waive minor technicalities and errors in the best interest of the state.

i) Bid Form: Respondent must submit the IFB form, signed, dated and completed. Failure to submit this information will result in disqualification of bid.

ii) Exhibit A: Company Profile

iii) Exhibit B: Equipment List

iv) Exhibit C: Past Projects with Corresponding References

v) Exhibit D: Key Personnel

vi) Exhibit E: Excluded Services and Parts

c) Response Period: Responses shall be binding for a period of sixty (60) business days from bid due date. No other costs, rates, or fees shall be payable to the Successful Respondent unless expressly agreed upon in writing by TPWD.

19) EVALUATION AND AWARD:

a) An award will be made on an all or none basis. Only responses submitted by the bid opening, with required submittal documents and meeting qualifications will be considered. Failure to submit the required information may be cause for rejection of the bid response. TPWD reserves the right to waive informalities and minor irregularities in bids received.

b) TPWD reserves the right to consider respondent qualifications, equipment, facility, references; conduct studies and other investigations as necessary to evaluate any response; request additional relevant information;

disqualify bid based on unsatisfactory reference checks, reports, and records of service.

c) Award: TPWD will award a Contract to the respondent whose quote is considered to be the Best Value to

TPWD, price and other factors considered. The following factors may be used to evaluate bids:

i) Lowest Price

ii) Ability, Qualifications and Experience - Meeting or Exceeding the Requirement

iii) Delivery / Service Schedule

iv) Past Performance

20) INVOICING AND PAYMENT: The following procedures apply to invoicing and payment in addition to those listed in the General Terms and Conditions, Para. 9:

a) Contractor to submit invoice(s) to: Texas Parks & Wildlife, Accounts Payable, 4200 Smith School Road, Austin, Texas 78744.

b) Invoices must show:

i) Name of Contractor exactly as shown on the contract, Texas Payee Identification Number (PIN), and correct "Remit to" address

ii) Name of receiving entity

iii) Contract/purchase order number

iv) Description, quantity, unit of measure, unit price, extended price of each item

IFB No. 802-25-48474-R Page 11 of 37

v) Total price

vi) Discount, if applicable, extended and deducted to arrive at a NET TOTAL for invoice

vii) Attach supporting documentation, if required

c) Payment:

i) Contractor will be paid for the services performed as invoiced. If another payment mechanism is agreed to by the parties, then contractor will be paid in accordance with the agreement approved by the parties.

ii) Payment normally will be made to the Contractor within 30 days after receipt of a properly prepared invoice or the receipt of and the acceptance of services ordered, whichever is later. State agencies are required by state law to pay properly submitted invoices within 30 days or the Contractor may charge a late payment fee established by law.

iii) Payments for services purchased with state appropriated funds will be made through state warrants issued by the Comptroller of Public Accounts. Payments by qualified ordering entities will be made through the entities’ local payment system.

d) Electronic payment may be available through some ordering entities. Contact Accounts Payable at 512-389-

4833 for additional information.

21) BIDDER AFFIRMATION

a) Bidder has not given, offered to give, nor intends to give at any time hereafter any economic opportunity, future employment, gift, loan, gratuity, special discount, trip, favor, or service to a public servant connection with the submitted bid.

b) Pursuant to Texas Government code, Title 10, Subtitle D, Section 2155.004(a), the bidder has not received compensation for participation.

IFB No. 802-25-48474-R Page 12 of 37

EXHIBIT A – COMPANY PROFILE

Respondent shall use this exhibit (or a reasonable facsimile) to clearly demonstrate how they meet the requirements set forth in this IFB. This form may be modified as needed to comply with the requirement to document company information. Failure to return this exhibit (or a reasonable facsimile) may result in the proposal being considered non-responsive.

Company Name:

Number Years in Business: Number of Employees:

Principal place of business (Corporate Headquarters):

Address:

City, State, Zip:

Facility responsible for servicing the contract:

Address:

City, State, Zip:

Contact Person regarding company’s proposal submission to the solicitation:

Name / Title:

Phone Number: Fax Number:

Email Address:

Personnel who will be responsible for the management and day-to-day operations of the services solicited in this IFB.

Name/Title:

Indicate if your company or any of its subsidiaries filed or met criteria for bankruptcy within last five years.

Yes __Yes __No If yes, explain.

Indicate if your company or any of its subsidiaries has been involved in litigation within last five years. If yes, explain.

__Yes __No If yes, explain.

Description of firm's background, history, and qualifications: (You may attach additional page for this section.)

IFB No. 802-25-48474-R Page 13 of 37

EXHIBIT B – EQUIPMENT LIST

Respondent Name: _________________________________

Describe all equipment and vehicles to be specifically used for this project in the space provided below. Make sure to include dimensions/capacities of equipment, make, model, horsepower and intended use by bid item. For purposes of this bid evaluation TPWD assumes that the respondent’s equipment list, (submitted below) includes ALL of the equipment that the respondent is dedicating to this project and has considered in his bid. All equipment used off pavement must be low pressure rubber-tired equipment.

BID

ITEM

EQUIPMENT

TYPE

MAKE & MODEL

HORSE

POWER

DIMENSION OR

CAPACITY

# OF

UNITS

LEASE (L)

OR OWN (O)

IFB No. 802-25-48474-R Page 14 of 37

EXHIBIT C – PAST PROJECTS WITH CORRESPONDING REFERENCES

Respondent Name: ____________________________________________

Respondents shall use this exhibit (or reasonable facsimile) to provide a minimum of three (3) references for jobs completed within the last five (5) years. The references shall illustrate recent experience successfully completing work of a similar nature and scope as the work described in this IFB. Attention: Do NOT use TPWD staff or past work performed for TPWD as a “reference” in Exhibit E. This form may be modified as needed to comply with the requirement to document company information. Failure to return this exhibit (or a reasonable facsimile) may result in the proposal being considered non-responsive. TPWD reserves the right to check references prior to award. Any negative responses received may be grounds for disqualification of the proposal.

REFERENCE 1:

Company Address:

Contact Name/Title/Phone:

Service Period:

Brief Description of Project

REFERENCE 2:

Contact Name/Title/Phone:

IFB No. 802-25-48474-R Page 15 of 37

REFERENCE 3:

Contact Name/Title/Phone:

REFERENCE 4:

Contact Name/Title/Phone:

IFB No. 802-25-48474 Page 16 of 37

EXHIBIT D – KEY PERSONNEL

Respondent Name: ____________________________________________

Respondents shall submit this exhibit (or a resume, max 1 page per person) for each key personnel to be assigned under the resulting contract. Include all requested information for each key personnel, including current certifications. Failure to return this exhibit (or reasonable facsimile) may result in proposal being considered non-responsive.

Key Personnel:

Full Name: __________________________________________________________________________

Job Title: __________________________________________________________________________

Total Years Employed by Respondent: ________ Total Years’ Experience (in required service): ________

Qualifications and Experience: __________________________________________________________

Specific Education, Training, Certifications: ________________________________________________

Personnel - Reference 1:

Company Name: _______________________________________________________________________

Contact/Title: _______________________________________________________________________

Phone: ___________________________ Service Period: __________________________________

Roles and Responsibilities: _______________________________________________________________

Personnel - Reference 2:

Company Name: _______________________________________________________________________

Contact/Title: _______________________________________________________________________

Phone: ___________________________ Service Period: __________________________________

Roles and Responsibilities: _______________________________________________________________

IFB No. 802-25-48474 Page 17 of 37

EXHIBIT E – EXCLUDED SERVICES AND PARTS

Respondent (Company/Firm): ____________________________________________

Respondents shall submit this exhibit (or reasonable facsimile) to list all excluded services and parts. Failure to return this exhibit (or reasonable facsimile) may result in proposal being considered non-responsive.

SERVICES: Respondent shall respond on this form to specify All services excluded from this contract.

PARTS: Respondent shall respond on this form to specify All parts excluded from this contract.

ATTACHMENT 1 – COOLING SYSTEM DESCRIPTION

Operating Data

Chiller #1

Chiller #2

Chiller #3

Chiller Manufacturer

Carrier

Chiller Type Centrifugal Centrifugal Screw Total Design Tonnage 305 305 160 Average Tonnage Actually Used 305 305 160 Running time (Hours per day) 12 12 12 Running Time (Days per Year) 290 290 290 Chilled Water Leaving Temp. (•F) 42 42 42 Chilled Water Return Temp. (•F) 55 55 55 Condenser Water Inlet Temp. (•F) 85 85 85 Condenser Water Outlet Temp. (•F) 95 95 95 Avg. Chilled Water Recirc. Rate (GPM) 780 780 780 Avg. Condenser Water Recirc. Rate (GPM) 1,200 1,200 1,200 Total Condenser Water Volume (Gals.) 3,000 3,000 3,000 Total Chilled Water Volume (Gals.) 1,000 1,000 1,000 Chilled Water Make-up Per Year (Gals.) 2,000 2,000 2,000 Make-up Water Cost ($/1,000 Gals.) 5.75 5.75

5.75

MAKE-UP WATER ANALYSIS

Make-up Source

City Water

Total Acid Hardness (as CaCo3) 120 ppm Total Soluble Hardness (as CaCo3) 125 ppm Calcium Hardness (as CaCo3) 65 ppm Magnesium Hardness (as CaCo3) 60 ppm P-alkalinity (as CaCo3) 10 ppm M-alkalinity (as CaCo3) 75 ppm Sodium Chloride (as NaCl) 65 ppm Silica (as SiO2) 14 ppm Conductivity 390 mmhos Total Iron (as Fe) .1 ppm pH 10.2 Units Chlorine Residual (free) 0.9 ppm

ATTACHMENT 2 – HEATING SYSTEM DESCRIPTION

Boiler #1

Boiler #2

Boiler #3

Boiler #4

Manufacturer

Lochinbar

Model # Hot Water Heating Boilers

CHN-0991-M9 CHN-0991-M9 CHN-0991-M9 CHN-0991-M9

Max. Pressure 160 PSI 160 PSI 160 PSI 160 PSI BTU/Hour Maximum 990,000 990,000 990,000 990,000 BTU/Hour Minimum 841,550 841,550 841,550 841,550 Fuel Natural Gas Natural Gas Natural Gas Natural Gas Blower Motor ½ HP ½ HP ½ HP ½ HP Running Time 90 Days/Year 90 Days/Year 90 Days/Year 90 Days/Year Running Time 8 Hrs/Day 8 Hrs/Day

8 Hrs/Day 8 Hrs/Day

ATTACHMENT 3 – SYSTEM PRODUCT SPECIFICATIONS

SCALE INHIBITOR:

The product selected must contain an organic scale inhibitor. The program must be an all organic type with no regulated heavy metals. The product cannot contain boron or other metal ions regulated by the City of Austin.

CORROSION INHIBITOR:

The inhibition mechanism must contain tollyl triazole, in conjunction with film forming type inhibitors.

DISPERSANT:

The only dispersant that is acceptable will be a polymeric anionic material. Under no circumstances will sulfonated esters be allowed.

pH CONTROL:

Under no circumstances will acidic materials be used in this facility. No sulfuric, hydrochloric or muriatic acids can be used.

BIOCIDE A:

This biocide will be a liquid oxidizing biocide with an inorganic stabilizer included in the product. The minimum content of active oxidizer will be 5%.

BIOCIDE B:

This biocide will be a non-ionic, non-oxidizing biocide with general kill capabilities. The biocide must be capable of being rendered harmless using simple chemicals and procedures. Under no circumstances may biocides containing any heavy metals or phenolic type materials be used. Persistent molecules or toxic materials of the gluteraldehye family cannot be used.

CHILLED WATER TREATMENT:

Contractor must comply with all City of Austin requirements governing the discharge of objectionable metal ions and water and wastewater discharge.

TOWER LAY-UP:

Contractor is to provide procedure for this seasonal need.

GENERAL TERMS AND CONDITIONS

MARCH 2022

(ITEMS BELOW APPLY TO AND BECOME A PART OF THE CONTRACT)

Any Contract awarded as a result of this solicitation will contain the General Terms and Conditions listed below in this Section. Subcontractors are also obliged to comply with these provisions.

1. DEFINITIONS: As used throughout this solicitation, the following terms have the meaning set forth below.

All other terms have the meaning set forth in Webster’s II New College Dictionary.

1.1. Bidder: An individual or entity that submits a bid. The term includes anyone acting on behalf of the individual or entity that submits a bid, such as an agent, employee and representative. See Respondent.

1.2. Contractor: The individual, corporation, company, partnership, firm, or organization that has to furnish the materials and has to perform the work as stated in the solicitation.

1.3. ESBD: The Electronic State Business Daily, which is available online at http://www.txsmartbuy.com/esbd .

1.4. Gov’t Code: The Texas Government Code.

1.5. Owner: Texas Parks and Wildlife Department, an agency of the State of Texas.

1.6. Party/Parties: Either the TPWD and Respondent separately or collectively.

1.7. Respondent: Any person or Vendor who submits a Bid/Proposal/Offer in response to this solicitation.

1.8. Services: Includes the use of labor, materials, facilities, equipment, and any other need that is necessary or incidental to the successful completion of the Contract.

1.9. Subcontractor: Any supplier, distributor, Contractor, person, or firm furnishing to the Contractor, materials or services necessary or incidental to the performance of the Contract between TPWD and Contractor.

1.10. TAC: The Texas Administrative Code, which is the publication for administrative rules.

1.11. Texas Identification Number: A unique 11-digit number assigned by the Texas Comptroller of Public Accounts. When a Payee first contracts with a state agency, that Payee must provide either a federal Employer Identification Number (EIN) or a Social Security number (SSN). The Texas Identification Number (TIN) is based on this number. (Note: If Respondent does not have a TIN, or does not know their TIN, they may list their EIN or SSN on the “Texas Identification Number” line of the Vendor Information Block of their RFP, RFO, IFB or RFQ response.)

1.12. TPWD: Texas Parks and Wildlife Department acting on behalf of the State of Texas.

2. SPECIFICATIONS:

2.1. The goods/services provided shall be in accordance with the purchase specifications herein. TPWD will decide the answers to all questions that may arise as to the interpretation of the specifications and the quality, or acceptability of goods/services provided. TPWD will decide the rate of progress of the work and the acceptable fulfillment of the goods/service on the part of the Contractor.

2.2. Catalogs, brand names or manufacturer's references are descriptive only, and indicate type and quality desired. Bids/Proposals on brands of like nature and quality will be considered unless advertised under Texas Gov't Code §2155.067. If the Respondent is offering brands other than the references, response should show manufacturer, brand or trade name, and other description of product offered. If Respondent is offering brand(s) other than brand(s) specified, illustrations and complete description of product offered are requested to be made part of the bid. Failure to take exception to specifications or reference data will require Respondent to furnish specified brand names, numbers, etc.

2.3. Unless otherwise specified, items shall be new and unused and of current production.

2.4. Samples, when requested, must be furnished free of expense to the State. If not destroyed in examination, they will be returned to the Respondent, on request, at Respondent's expense. Each sample should be marked with Respondent's name and address, and requisition number. Do not enclose in or attach response submission to sample.

2.5. The State will not be bound by any oral statement or representation contrary to the written specifications of this Solicitation.

2.6. Manufacturer's standard warranty shall apply unless otherwise stated in the solicitation.

3. AWARD OF A PURCHASE ORDER: Standard Purchase Order Terms and Conditions apply. If a conflict exists between the standard Purchase Order Terms and Conditions and specific language in this solicitation, the language in the solicitation shall prevail.

3.1. A response to a solicitation is an offer to Contract with TPWD based on the terms, conditions and specifications contained in the solicitation. Responses do not become Contracts unless and until they are accepted through an authorized TPWD designee by issuance of a Purchase Order.

3.2. This procurement will be conducted in accordance with the State Purchasing Act, Title 10, Subtitle D, Chapters 2151 through 2177, of the Texas Gov’t Code (TGC) and TPWD rules. Any Contract resulting from this procurement shall consist of one (1) document. This document will contain all of the rights and duties of the parties extracted from the relevant terms and conditions of this solicitation (including its attachments, exhibits, supplements, and addenda); the successful Contractor’s response; any TPWD request for a Best and Final Offer; and any successful Contractor’s Best and Final Offer, if applicable.

3.3. Best Value – TPWD will be the sole judge of best value. Award will be based on Best Value criteria and may include, but is not limited to:

3.3.1. Best meets the goals and objectives of the solicitation as stated above.

3.3.2. Best meets the quality and reliability of the proposed services.

3.3.3. Effect of the proposed solution on agency productivity.

3.3.4. Provides the most customer focused solution that will best meet the needs of the public.

3.3.5. Experience in successfully providing services in this solicitation.

3.3.6. Past Performance: A Respondent’s past performance will be measured based upon pass/fail criteria in compliance with applicable provisions of Gov't Code §§2155.074, 2155.075, 2156.007, 2157.003, and 2157.125. Respondents may fail this selection criterion for any of the following conditions:

a) The Vendor has a score less than C or Legacy Unsatisfactory in the Vendor Performance System,

b) Currently under a Corrective Action Plan through the Texas Comptroller of Public Accounts (CPA),

c) Having repeated negative Vendor Performance Reports for the same reason,

d) Having Purchase Orders that have been cancelled in the previous 12 months for non-performance (i.e., late delivery, etc.).

3.3.7. Contractor performance information is located on the CPA web site at:

www.txsmartbuy.com/vpts. CPA may conduct reference checks with other entities regarding past performance. In addition to evaluating performance through the Vendor Performance Tracking System (as authorized by 34 Texas Administrative Code §20.115), CPA may examine other sources of vendor performance including, but not limited to, notices of termination, cure notices, assessments of liquidated damages, litigation, audit reports, and non-renewals of Contracts. Any such investigations shall be at the sole discretion of CPA, and any negative findings, as determined by CPA, may result in non-award to the Respondent.

4. UNIT PRICES: Respondents must price per unit shown. Unit prices shall govern in the event of extension errors.

5. FREIGHT: Quote FOB destination, freight prepaid and allowed unless otherwise stated within the specifications.

6. DELIVERY:

6.1. Show number of days required to place material in receiving agency's designated location under normal conditions. Delivery days mean calendar days, unless otherwise specified. Failure to state delivery time obligates Respondent to deliver in 14 calendar days. Unrealistic delivery promises may cause solicitation to be disregarded.

6.2. If delay is foreseen, Contractor shall give written notice to the TPWD. Contractor must keep the TPWD advised at all times of status of order.

6.3. Default in promised delivery (without accepted reasons) or failure to meet specifications authorizes the TPWD to purchase supplies elsewhere and charge full increase, if any, in cost and handling to defaulting Contractor.

6.4. Substitutions: No substitutions permitted without written approval of TPWD.

6.5. Delivery shall be made during normal working hours only unless prior approval has been obtained from ordering agency. Normal working hours are 8:00 AM until 5:00 PM Monday through Friday except State and National holidays.

7. TESTING AND INSPECTION:

7.1. TPWD may test and inspect goods and services purchased under the Contract to ensure compliance with the specifications of this solicitation and the Contract. TPWD may also test and inspect goods and services before they are purchased under the Contract. Authorized TPWD personnel shall have access to the Respondent's place of business for the purpose of inspecting the goods. To the extent practical, TPWD inspections will not disrupt the Respondent's daily operations. Tests shall be performed on samples submitted with the Bid/Proposal or on samples taken from regular shipments. All costs of testing and inspection shall be borne by the Respondent.

In the event the goods tested fail to meet or exceed all conditions and requirements of the solicitation and Contract, the goods will be rejected in whole or in part, at the State's option, and returned to the Respondent or held for disposition at the Respondent's expense. Latent defects may result in cancellation of the Contract at no expense to the state.

7.2. If material fails to meet specifications, the Respondent will be notified by fax, mail, or e-mail. The Respondent will have ten (10) working days after receipt of the notification to remove the rejected material from state property. Material will be removed at the Respondent’s expense. Material not removed in the allotted time period will be disposed by TPWD. The Respondent will be charged for all disposable expenses conducted by TPWD.

8. CHANGES: TPWD may at any time, by a written order, make changes within the general scope of this Contract, in the definition of services to be performed, and the time (i.e., hours of the day, days of the week, etc.) and place of performance thereof. If any such change causes an increase or decrease in the cost of, or the time required for the performance of any part of the services under this Contract, whether changed or not changed by any such order, an equitable adjustment shall be made in the Contract price or time of performance or both and the Contract shall be modified in writing accordingly. Any claim by the Contractor for adjustment under this clause must be asserted within 30 days from the date of receipt by the Contractor of the notification of change, provided, however, that TPWD, if it decides that the facts justify such action, may receive and act upon such claims asserted at any time prior to final payment under this Contract.

Failure to agree to any adjustment shall be a dispute concerning a question of fact within the meaning of the clause of this Contract entitled "Dispute Resolution."

9. INVOICING AND PAYMENT:

9.1 Invoices: In order to receive payment under the Contract, the Contractor must submit an original invoice to TPWD, which will be designated in the Purchase Order as the "Bill To" address. To be a proper invoice that may be accepted and paid, the invoice must include the following information and/or attachments: (1) Name and address of the Contractor. (2) The Contractor's Texas Identification Number (TIN). (3) The Contractor's invoice remittance address. (4) The Purchase Order number authorizing the delivery of products or services.