Engineering_Order_26-00748.pdf
PDF 841 KB Posted
- Attached to
- GENERATOR, ALTERNATI
- Solicitation number
- SPRTA1-26-R-0183
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Air Force Engineering Order (EO 2011C1170-T) dated August 18, 2010, addressing Item Unique Identification (IUID) requirements for an AC Generator component used on F-16 Aircraft.
The engineering order mandates that the F-16 Aircraft AC Generator (Part Number 977J330-3) shall be marked with a Unique Item Identifier per MIL-STD-130. If no UID label currently exists, a new UID label (Part Number 200733803-17) must be fabricated and attached to the existing identification plate or label (Part Number 765589). The new UID label will be positioned on the existing identification plate/label as shown in the referenced sketch on page 2, with an acceptable alternate part (UID Label P/N 200945085-005A) also specified. The parts list changes identify two additions: the UID Label (CAGE Code 98747, P/N 200733803-17) and the UID Label Alternate (CAGE Code 98748, P/N 200945085-005A), both secured using PV6 Tesa Secure Tape or equivalent. The order was prepared by Adolfo Cortez Jr. on September 21, 2011, and released by Jose A. Jimenez (GUEA) on September 27, 2011, under the DRC Contract.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRTA1-26-R-0183_with attachments.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AF IMT 3925, 20030819, V1 REPLACES AF FORM 2600, 19940701, WHICH IS OBSOLETE
ENGINEERING ORDER
1. ENGINEERING ORDER NO.
DATE: PAGE OF PAGES
2. DWG TITLE
3. DWG CAGE CODE
4. DWG NO.
5. NEXT ASSY 6. USED ON
7. OPR CAGE CODE
98748
DWG SIZE
DWG SHEET(S)
LATEST DWG REV LTR
8. TYPE OF ENGINEERING ORDER 9. REASONS FOR CHANGE 11. DOCUMENTS AFFECTED (TO/TCTO/SPEC/OTHER)
14. CORROSION CONT. MON. SYMBOL DATE
ADVANCE CHANGE ERROR CORRECTION
DEVIATION AUTHORIZED DESIGN CHANGE 15. NDI SYMBOL DATE
CHANGE NOTICE DRAWING CLARIFICATION
INFORMATION UPDATE DRAWING 12. EO PREPARED/REQUESTED BY
SYMBOL
DATE 16. SYMBOL DATE
10. DISPOSITION OF SPARES OTHER COMMENTS
This EO adds Item Unique Identification (IUID) requirements to the drawing
DRC Contract
PHONE
17. DWG CHANGED BY SYMBOL DATE
REWORK
MODIFY 13. ENGINEERING APPROVAL SYMBOL DATE 18. CHANGE CHECKED BY SYMBOL DATE
SCRAP
REPLACE PHONE 19. EO/DWG RELEASED BY SYMBOL DATE
20. DESCRIPTION OF CHANGES/REMARKS
gregory hite Sticky Note Marked set by gregory hite
AF IMT 3926, 20030819, V1 REPLACES AF FORM 2601, 19940701, WHICH IS OBSOLETE
ENGINEERING ORDER
(Continuation Sheet)
1. ENGINEERING ORDER NO.
DATE: PAGE OF PAGES
2. DWG TITLE
3. DWG CAGE CODE
4. DWG NO.
5. DESCRIPTION OF CHANGES/REMARKS
1. ENGINEERING ORDER NO.
ENGINEERING ORDER - PARTS LIST CHANGES
DATE: IPAGE OF PAGES
2. DWGTITLE 13. DWG CAGE CODE 4. DWGNO.
PARTS LIST CHANGE
QTY REQ PER DASH NO
CAGE FINDACTION SYM NOMENCLATURE
CODE IDENTIFYING NO. MATERIAUSPECIFICATION ZONE NO.
AF IMT 3927, 20030819, V1 REPLACES AF FORM 2601, 19940701, WHICH IS OBSOLETE
| QTY REQ 3Row5: |
| QTY REQ 2Row13: |
| SYMRow6: |
| SYMBOL_2: |
| IDENTIFYING NORow11: |
| FIND NORow6: |
| IDENTIFYING NORow14: |
| NOMENCLATURERow4: |
| Check Box18: Off |
| QTY REQ 2Row15: |
| CAGE CODERow8: |
| CAGE CODERow9: |
| Check Box10: Off |
| QTY REQ 3Row12: |
| CAGE CODERow2: 98748 |
| CAGE CODERow3: |
| CAGE CODERow4: |
| Check Box15: Off |
| CAGE CODERow6: |
| CAGE CODERow7: |
| QTY REQ 3Row10: |
| SYMRow12: |
| CAGE CODERow14: |
| DATE_5: |
| FIND NORow4: |
| IDENTIFYING NORow8: |
| IDENTIFYING NORow5: |
| FIND NORow11: |
| ZONERow4: |
| FIND NORow3: |
| ACTIONRow4: |
| ZONERow1: |
| TOTAL PAGES: 3 |
| Check Box13: Off |
| CAGE CODERow11: |
| FIND NORow15: |
| Check Box6: Off |
| PHONE: (405) 734-8273 |
| NOMENCLATURERow5: |
| SYMBOL_4: |
| ACTIONRow10: |
| DATE_9: 9-27-11 |
| FIND NORow1: |
| QTY REQ 2Row3: |
| QTY REQ 2Row7: |
| QTY REQRow2: 1 |
| DESCRIPTION OF CHANGES/REMARKS: - F-16 Aircraft AC Generator (PN 977J330-3) shall be marked with a Unique Item Identifier (UII). (REF: MIL-STD-130) |
- If no UID label is present, fabricate new UID label (200733803-17) to attach to the existing identification plate/label (PN 765589).
- New UID label will be located on the existing identification plate/label as shown in sketch/photo on page 2, AF form 3926.
(UID Label P/N 200945085-005A is an acceptable alternate part)
| QTY REQRow7: | |
| SYMRow14: | |
| MATERIAUSPECIFICATIONRow8: | |
| MATERIAUSPECIFICATIONRow9: | |
| ACTIONRow12: | |
| MATERIAUSPECIFICATIONRow4: | |
| QTY REQ 3: | |
| MATERIAUSPECIFICATIONRow6: | |
| MATERIAUSPECIFICATIONRow7: | |
| MATERIAUSPECIFICATIONRow1: PV6 Tesa Secure Tape or Equivalent | |
| MATERIAUSPECIFICATIONRow2: PV6 Tesa Secure Tape or Equivalent | |
| MATERIAUSPECIFICATIONRow3: | |
| Check Box8: Off | |
| SYMRow2: | |
| FIND NORow14: | |
| FIND NORow7: | |
| QTY REQ 3Row13: | |
| SYMRow11: | |
| QTY REQRow9: | |
| PAGE NO: 1 | |
| NOMENCLATURERow6: | |
| IDENTIFYING NORow6: | |
| 2011-09-22T08:20:45-0500 | |
| CORTEZ.ADOLFO.JR.1384345812 |
| CAGE CODERow15: |
| DATE_4: 20110921 |
| ZONERow10: |
| ZONERow11: |
| ZONERow12: |
| ZONERow13: |
| SYMRow4: |
| ZONERow15: |
| SYMRow10: |
| NOMENCLATURERow10: |
| NOMENCLATURERow11: |
| NOMENCLATURERow12: |
| IDENTIFYING NORow3: |
| NOMENCLATURERow14: |
| SYMRow7: |
| ACTIONRow1: ADD |
| QTY REQ 3Row1: |
| NEXT ASSY: N/A |
| QTY REQ 3Row3: |
| QTY REQ 3Row2: |
| Check Box7: Off |
| QTY REQ 3Row4: |
| QTY REQ 3Row7: |
| QTY REQ 3Row6: |
| QTY REQ 3Row9: |
| QTY REQ 3Row8: |
| IDENTIFYING NORow9: |
| DWG CAGE CODE: 99167 |
| QTY REQRow15: |
| SYMBOL_7: |
| ZONERow8: |
| NOMENCLATURERow7: |
| SYMRow9: |
| QTY REQRow10: |
| MATERIAUSPECIFICATIONRow11: |
| IDENTIFYING NORow12: |
| DOCS AFFECTED: 8A6-8-11-3 |
8A6-8-11-4
| FIND NORow5: | |
| DATE_8: | |
| CAGE CODERow1: 98747 | |
| CAGE CODERow5: | |
| QTY REQRow3: | |
| CORROSION CONT MON: | |
| Check Box9: Off | |
| FIND NORow8: | |
| Check Box12: Off | |
| SYMBOL_3: | |
| EO DATE: 2010-08-18 | |
| IDENTIFYING NORow10: | |
| ACTIONRow7: | |
| FIND NORow12: | |
| IDENTIFYING NORow7: | |
| CAGE CODERow12: | |
| DATE_7: 27 SEP 2011 | |
| ACTIONRow13: | |
| Check Box14: Off | |
| PAGE NO 2: 2 | |
| PAGE NO 3: 3 | |
| ZONERow9: | |
| QTY REQRow5: | |
| QTY REQ 2Row2: | |
| NOMENCLATURERow8: | |
| QTY REQ 2Row1: | |
| QTY REQ 2Row6: | |
| QTY REQRow11: | |
| QTY REQ 2Row4: | |
| QTY REQ 2Row5: | |
| QTY REQ 2Row8: | |
| QTY REQ 2Row9: | |
| DWG TITLE: AC GENERATOR | |
| DATE_2: | |
| SYMBOL_6: 422 SCMS | |
| ACTIONRow15: | |
| SYMRow3: | |
| DWG SHEETS: | |
| IDENTIFYING NORow2: 200945085-005A | |
| IDENTIFYING NORow1: 200733803-17 | |
| QTY REQRow8: | |
| ZONERow5: | |
| 2011-09-27T08:59:03-0500 | |
| JIMENEZ.JOSE.A.1231036500 |
| MATERIAUSPECIFICATIONRow10: |
| Check Box16: Off |
| QTY REQ 3Row14: |
| SYMBOL_5: |
| NOMENCLATURERow1: UID LABEL |
| NOMENCLATURERow9: |
| SYMRow5: |
| SYMBOL_8: GUEA |
| QTY REQRow12: |
| QTY REQ 2Row10: |
| QTY REQ: -3 |
| FIND NORow9: |
| IDENTIFYING NORow13: |
| QTY REQ 3Row11: |
| Check Box19: Off |
| ACTIONRow6: |
| IDENTIFYING NORow4: |
| PHONE_2: 405/734-8274 |
| SYMRow15: |
| CAGE CODERow13: |
| DATE_6: |
| FIND NORow10: |
| QTY REQ 2Row12: |
| EO PREPARED/REQUESTED BY: Adolfo Cortez Jr |
| DESCRIPTION OF CHANGES/REMARKS CONT: |
| ZONERow2: |
| SYMBOL: 422 |
SCMS
| ACTIONRow9: | |
| SYMRow8: | |
| FIND NORow2: | |
| MATERIAUSPECIFICATIONRow12: | |
| NOMENCLATURERow2: UID LABEL(Alternate) | |
| QTY REQRow1: 1 | |
| NDI: | |
| ACTIONRow3: | |
| Check Box11: Yes | |
| QTY REQ 2Row14: | |
| ACTIONRow11: | |
| MATERIAUSPECIFICATIONRow14: | |
| MATERIAUSPECIFICATIONRow13: | |
| ENG ORD NO: 2011C1170-T | |
| NOMENCLATURERow13: | |
| QTY REQ 3Row15: | |
| ZONERow6: | |
| MATERIAUSPECIFICATIONRow5: | |
| ACTIONRow2: ADD | |
| NOMENCLATURERow15: | |
| LATEST DWG REV LTR: | |
| QTY REQRow4: | |
| ZONERow3: | |
| DWG NO: 977J330 | |
| 2011-09-27T08:58:55-0500 | |
| JIMENEZ.JOSE.A.1231036500 |
| QTY REQ 2Row11: |
| FIND NORow13: |
| IDENTIFYING NORow15: |
| DATE_3: |
| NOMENCLATURERow3: |
| USED ON: F-16 Aircraft |
| MATERIAUSPECIFICATION: |
| QTY REQRow14: |
| ACTIONRow5: |
| ACTIONRow14: |
| SYMRow1: |
| QTY REQRow13: |
| CAGE CODERow10: |
| Check Box5: Yes |
| QTY REQRow6: |
| DWG SIZE: |
| SYMRow13: |
| QTY REQ 2: |
| ZONERow14: |
| ACTIONRow8: |
| ZONERow7: |
File details come from the government source that posted it. Updated .