Engineering Data Requirements.pdf
PDF 88 KB Posted
- Attached to
- Sources Sought: F-16 Transparencies
- Solicitation number
- FD20202700027
About this file
This document is an Engineering Data Requirements specification (Attachment "A") for the manufacture of a Canopy Transparency component for the F-16 aircraft. The part number is 5004550-09, with National Stock Number 1560-01-462-2040WF. The specification was prepared by Tim Lucas at Hill Air Force Base (416 SCMS/GUMAE) on March 24, 2014.
The document establishes manufacturing and marking requirements for the canopy transparency, specifying that military specifications and standards will not be furnished in the bid set. Contractors must adhere to all identified specifications and control drawings without deviations unless prior approval is obtained from OO-ALC Engineering. Any material or source substitutions require cognizant OO-ALC Engineering approval. Part marking must comply with MIL-STD-130. The specification includes detailed Item Unique Identifier (IUID) requirements, mandating contractors to modify or supplement drawings for compliance. IUID marking must use both Human Readable (minimum 1/8 inch lettering) and Machine Readable 2D matrix formats (minimum 1/4 inch square, Construct 2), including CAGE code (17V), part number (1P), and serial number (IS). All IUID markings must be permanent, highly visible, and easily accessible, with compliance required per MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418 standards. Existing labels may only be replaced with government engineering permission.
View the file
Other files
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
CANOPY TRANSPARENCY F-16
2. PART NUMBER:
5004550-09
3. NATIONAL STOCK NUMBER:
1560-01-462-2040WF
PREPARED BY:
Tim Lucas
OFFICE SYMBOL:
416 SCMS/GUMAE
DATE:
03/24/2014
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY
SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT OO-
ALC ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL FROM OO-ALC ENGINEERING.
7. PART MARKING AS PER MIL-STD-130.
9. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
A. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
B. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE
EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
C. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
D. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
E. IUID MARKING MUST BE PERMANENT.
F. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
I. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
File details come from the government source that posted it. Updated .