Engineering Data Requirements.pdf
PDF 90 KB Posted
- Attached to
- Gearbox
- Solicitation number
- SPRHA1-26-R-0251
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (HILL AFB Form 462) for the manufacture of a Gearbox, Accessory Drive for F-15 Power Systems. The component has part number 367730-2-1 and National Stock Number 2835-01-456-6510. The document was prepared by Daniel Newquist at Hill Air Force Base (419 SCMS/GUEA) on 24 July 2025.
The contractor must certify in writing full compliance with all applicable military manuals, specifications, and standards prior to contract award and is responsible for thoroughly researching and understanding all manufacturing requirements. Item Unique Identification (IUID) in accordance with MIL-STD-130 is required, with the contractor responsible for submitting specific marking methods, location, content, and format for government approval before contract delivery. The marking must not adversely affect item integrity or performance, must remain readable throughout the item's useable life, and shall be placed in a highly visible and easily accessible area unless functionality is compromised. The contractor must obtain written approval of the proposed marking method prior to IUID application and delivery. All references must utilize the latest revision of applicable military specifications and standards.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA126R0251_0001 CUI SSI.pdf | ||
| Packaging Statement of Work.pdf | ||
| SPRHA126R0251 CUI SSI.pdf | ||
| Special Packaging Instructions_SPI-F01-279-4740.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV:
ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
GEARBOX, ACCESSORY DRIVE; F-15 POWER SYSTEMS
2. PART NUMBER:
367730-2-1
3. NATIONAL STOCK NUMBER:
2835-01-456-6510
PREPARED BY:
DANIEL NEWQUIST
OFFICE SYMBOL:
419 SCMS / GU E A
DATE:
24 JULY 2025
HILL AFB FORM 462 Page 1 of 1
4. PRIOR TO CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN WRITING FULL
COMPLIANCE WITH MANUALS, SPECIFICATIONS, AND STANDARDS CALLED OUT AND REQUIRED FOR THE
MANUFACTURE OF THIS CONTRACTED COMPONENT/ASSEMBLY. CONTRACTOR IS RESPONSIBLE TO COMPLETELY
SEARCH THESE MANUALS, SPECIFICATIONS AND STANDARDS AND FULLY UNDERSTAND THE REQUIREMENTS
NECESSARY TO MANUFACTURE THIS COMPONENT. ANY QUESTIONS CAN BE FORWARDED TO 419 SCMS/GUEA.
5. ITEM UNIQUE IDENTIFICATION (IUID) IS REQUIRED, REFERENCE MIL-STD-130. SPECIFIC INSTRUCTIONS FOR MARKING
METHODS, LOCATION, CONTENT, AND FORMAT SHALL BE SPECIFIED BY THE CONTRACTOR AND SUBMITTED TO THE
GOVERNMENT FOR APPROVAL PRIOR TO CONTRACT DELIVERY. THE CONTRACTOR MUST DEMONSTRATE THAT THE
MARKING DOES NOT ADVERSELY AFFECT ITEM INTEGRITY OR PERFORMANCE AND WILL REMAIN READABLE AND
ATTACHED THROUGHOUT THE USEABLE LIFE OF THE ITEM. THE ITEM SHALL BE MARKED IN A HIGHLY VISIBLE AND
EASILY ACCESSABLE AREA UNLESS IT INTERFERES WITH PART FUNCTIONALITY. THE CONTRACTOR SHALL OBTAIN
WRITTEN APPROVAL OF THE PROPOSED MARKING METHOD PRIOR TO IUID APPLICATION AND CONTRACT DELIVERY.
6. IN ALL REFERENCES, USE THE LATEST REVISION OF THE MILITARY SPECIFICATION AND STANDARDS.
File details come from the government source that posted it. Updated .