Engineering Data Requirements - 0263.pdf

98 KB Posted

Attached to
Circuit Card Assemblies
Solicitation number
SPRHA4-26-R-0166
Issued by

About this file

Written by GovTribe AI ·

This document is an Engineering Data Requirements form for a DC to DC Converter manufactured for the military. The specific converter has a part number 16VE584029-3 and a National Stock Number of 6130-01-388-0263WF. The document, prepared by Roy Del Toro from the 416 SCMS/GUEAA office at Hill Air Force Base on 23 April 2024, outlines critical manufacturing instructions and requirements. Key stipulations include: sources and materials must be those listed on standards and specifications, with any substitutions requiring prior approval from the cognizant engineering activity; deviations from control drawing specifications are not authorized without explicit prior approval; and all product marking must comply with the latest version of MIL-STD-130.

View the file

Other files

File Type Posted
Engineering Data List - 0263.pdf PDF
List of NSN.pdf PDF
SPRHA426R0166 - Final (Dated) Solicitation CUI SSI.pdf PDF
Packaging Statement of Work -3-2025.pdf PDF
Counterfeit Prevention Plan.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

CONVERTER, DC TO DC, MMC

2. PART NUMBER:

16VE584029-3

3. NATIONAL STOCK NUMBER:

6130-01-388-0263WF

PREPARED BY:

ROY DEL TORO

OFFICE SYMBOL:

416 SCMS/GUEAA

DATE:

23 April 2024

HILL AFB FORM 462 Page 1 of 1

4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA

INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.

5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY

SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT

ENGINEERING ACTIVITY.

6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR

APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.

7. Marking is to be performed in accordance with the latest version of MIL-STD-130.

File details come from the government source that posted it. Updated .