Engine Replace and Install PWS.docx

2009 (09C00243) International Engine Removal & Install

PERFORMANCE WORK STATEMENT (PWS)

5 Apr 2022

1. GENERAL SCOPE: This is a non-personal service contract to remove and install an engine for a 2009 International 7300. The contractor shall provide all personnel, equipment, supplies, facilities, transportation, tools, materials, supervision and all non-personal services necessary to perform the requirement as defined in this PWS. The contractor shall also perform to the standards within the contract.

2.0 OBJECTIVES: The contractor at minimum shall remove, install and make small repairs (if applicable) to the aforementioned engine by providing the below services. The contractor is also required to furnish and provide all necessary parts for the asset to meet or exceed original equipment manufacturer (OEM) specifications.

3.0 SERVICES:

· Movement/Shipment of asset

· Vehicle Management can assist up to 30 miles.

· Removal of the engine assembly

· Installation of a new engine assembly

· Provide quote/parts list – Await Vehicle Management approval for repairs

· Ensure all replacement parts meet OEM specifications

4.0 PLACE OF PERFORMANCE: The contractor is responsible for locating and communicating to the government the area in which the services will be executed.

5.0 CONTRACTOR’S RESPONSIBILITIES: The contractor at minimum is responsible for:

· Transporting all components pertaining to the engine to all locations to perform the services outlined within this performance work statement.

· All costs associated with the transportation of all components pertaining to the engine removal/install.

· Coordinating with the government to provide a location for returning all components pertaining to the engine removal/install.

6.0 QUALITY ASSURANCE: Items will be inspected by the NCOIC of Fire Truck & Refueling Maintenance to ensure all work requested was provided. A serviceability check will be conducted no later than 7 days after the asset is retrieved from the vendor.

7.0 WORK PERFORMANCE TIMELINE: The asset should not stay at the repair location longer than 2 months. If labor hours are to exceed 60 hours, Vehicle Management is to be notified by e-mail prior to proceeding with additional labor.

8.0 PARTS REQUIRED:

9.0 POINTS OF CONTACT AND AUTHORITIES: The U.S. Government (Exercise Executive Agent) retains the right to make changes to this Statement of Work, prior to contract award, based on factors that are unknown at this time (e.g. funding is formally decreased, direction from U.S. Pacific Command due to changing political conditions, dates shift slightly, etc). The contracting officer is the only person authorized to approve any changes to the requirements of the contract and notwithstanding provisions contained elsewhere in this contract, the authority remains solely with the contracting officer. In the event the contractor effects any change at the direction of any person other than the contracting officer, the change will be considered to have been made without authority and no adjustment will be made in the contract price as a result of the change.

· NCOIC, Materiel Control – Brown, Rodney V TSgt, USAF

· Office number – 907-377-3705

· Rodney.brown.15@us.af.mil

· Materiel Control Supervisor – Young, David N SrA, USAF

· Office number – 907-377-7872

· David.young.91@us.af.mil

10.0 WARRANTY INFORMATION: Warranty information is required to be provided prior to the start of the repairs.