Enclosure 2 Contractor Technical Data Package (CTDPL) SPRRA1-23-R-0054.pdf

PDF 344 KB Posted Jul 3, 2023

Attached to: Chinook Spare parts
Solicitation number: SPRRA1-23-R-0054
Issued by: Defense Logistics Agency Aviation

About this file

Written by GovTribe AI · Dec 21, 2023

This document provides a technical data package for various spare parts required under Solicitation Number SPRRA1-23-R-0054 issued by the Defense Logistics Agency Aviation. Key details include specifications for over 30 part numbers across multiple critical systems on the Chinook helicopter. The data package specifies engineering drawings, testing requirements, and quality assurance procedures for items such as transmission adapters, rotor shafts, bearings, and drive assemblies. Serialization and critical safety item tracking requirements are defined. Packaging, preservation, and shipping instructions are also included.

View the file

Other files

File	Type	Posted
SPRRA1-23-R-0054 Huntsville DLR Solicitation.pdf	PDF	Jul 3, 2023
Enclosure 1 Identification of Requirements (IOR) SPRRA1-23-R-0054.pdf	PDF	Jul 3, 2023

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

07/03/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 145D2301-3 WPN SYS: A-BK

PRON NUMBER: 17A00753

NSN: 1615-01-1142150

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

NO DOCUMENTATION PROVIDED, BUILD TO CURRENT REVISION

07/03/2023 AMCOM TDPL PAGE 2

PACKAGING REQUIREMENTS

PART NUMBER: 145D2301-3

PRON NUMBER: 17A00753

NSN: 1615-01-1142150

Weapon System: A-BK NOUN: COVER ASSEMBLY,TRAN

Packaging Specialist: ANDRADE, KACIE Phone: (256)876-0128 Date: 06/21/2023

Estimated Maximum Unit Package Weight (Pounds) and Size (Inches):

Weight: 90.0 Length: 40.0 Width: 40.0 Depth: 10.0

[X] Quantity Per Unit Pack: 001 Intermediate Container Quantity: 000

[X] MIL-STD-129 Markings Shall Apply

[X] All Wood Packaging Material (WPM) must be ISPM-15 Compliant

[ ] Level of Preservation - Commercial / Level of Pack - Commercial in Accordance with ASTM-D-3951

[X] Level of Preservation - Military / Level of Pack - [A] in Accordance with:

[ ] 1. Preservation Requirements and Packing Requirements contained in Special Packaging Instructions (SPI) Number: Part Number:

[ ] 2. Preservation Requirements and Packing Requirements Contained in MIL-STD-2073-1

[ ] 3. Preservation Requirements and Packing Requirements Contained in

[X] 4. MIL-STD-2073-1 Codes, Appendix J

JI/A/MP [41] JII/CD [1] JIII/PM [00] JIV/WM [GB]

JV/CD [ZZ] JVI/CT [Z] JVII/UC [F9] JVII/IC [00]

JIX/A/PK [F] JX/SM [00] JVIIIA/OPI [M]

[X] 5. Supplemental Information

ZZ/Z = AD/NA; AS REQD WPM MUST BE ISPM-15 COMPLIANT

[ ] 6. Reusable Container will be Government Furnished Material

[ ] 7. Reusable Container will be Contractor Furnished Material

07/03/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 145D3300-6 WPN SYS: A-BK

PRON NUMBER: 02A01595

NSN: 1680-01-3201191

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

07/03/2023 CONTRACT TDPL PAGE 2

PART NUMBER: 145D3300-6

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 114R3053-10 NSN: 3040-01-3386278 NOUN: SHAFT ASSY, SLIDER, AFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/06/1996 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N ASSEMBLY CONTAINS CRITICAL SAFETY ITEMS.

PART REQUIRES ENGINEERING TESTING: YES

TESTING REQUIREMENTS:

FATIGUE: YES ENDURANCE: NO INTERCHANGE: NO

VENDORS:

CAGE CORPORATION QUAL TEST

77272 THE BOEING COMPANY TESTED

07/03/2023 CONTRACT TDPL PAGE 3

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 114R3053-11 NSN: 3040-01-4373154 NOUN: SHAFT, SLIDER, AFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/03/1996 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N FLUORESCENT PENETRANT INSPECTION PER BAC 5423, OR ASTM E1417, OR SRD APPROV

ED EQUIVALENT.

Y Y N 100% MINIMUM SHOT PEEN COVERAGE OVER THE AREA DEFINED ON THE DRAWING.

PART REQUIRES ENGINEERING TESTING: NO

FATIGUE: NO ENDURANCE: NO INTERCHANGE: NO

77272 THE BOEING COMPANY

07/03/2023 CONTRACT TDPL PAGE 4

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D0123-1 NSN: 1615-01-1130244 NOUN: LOCKNUT, XMSN

CRITICAL SAFETY ITEM: YES CSI DATE: 01/16/1987 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y N N THREAD ROOT RADIUS.

05141 MCMELLON BROTHERS INC

07/03/2023 CONTRACT TDPL PAGE 5

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D3300-6 NSN: 1680-01-3201191 NOUN: SHAFT ASSY, AFT ROTOR

CRITICAL SAFETY ITEM: YES CSI DATE: 01/08/1995 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N ORIENTATION OF THE TRANSMISSION LUBE DAM, P/N 145D0129-1 IS CRITICAL. THE 1

0.06 DIAMETER MUST BE ORIENTED AWAY FROM THE 145DS304 BEARING DURING ASSEMB

LY.

Y Y N TORQUE OF LOCKNUT (145D0123-1) TO 7500-8000 FT LBS

Y Y N ASSEMBLY CONTAINS CRITICAL SAFETY ITEMS.

Y Y Y TORQUE NUT (BACN10TR14) ONTO BOLT (NAS634-60) TO 335-416 FT-LBS (WET) PER D

RAWING 145D0001. LUBRICATE ALL THREADS WITH TRANSMISSION OIL.

07/03/2023 CONTRACT TDPL PAGE 6

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D3301-2 NSN: 3040-01-4340812 NOUN: ROTOR SHAFT, LOWER AFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/01/1987 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N BAKE WITHIN 4 HOURS OF CADMIUM PLATING AT 275 DEGREES FAHRENHEIT PLUS OR MI

NUS 25 DEGREES FAHRENHEIT FOR A MINIMUM OF 23 HOURS, OR SRD APPROVED ALTERN

ATIVE.

Y Y N MAGNETIC PARTICLE INSPECTION PER BAC5424, OR ASTM E1444, OR SRD APPROVED EQ

UIVALENT.

Y Y N 100% MINIMUM SHOT PEEN COVERAGE OVER THE AREA DEFINED ON THE DRAWING.

Y Y N ETCH INSPECTION SHALL SHOW NO CLASS C OR CLASS D BURNS AS IDENTIFIED IN BAC

5436 ON ANY FINAL SURFACE.

Y Y N BAKE AFTER NITAL ETCH PER AMS2759/9, OR SRD APPROVED ALTERNATIVE.

07/03/2023 CONTRACT TDPL PAGE 7

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D3302-2 NSN: 3040-01-4340813 NOUN: ROTOR SHAFT, CENTER AFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/01/1987 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N FLUORESCENT PENETRANT INSPECTION PER BAC 5423, OR ASTM E1417, OR SRD APPROV

Y Y N 100% MINIMUM SHOT PEEN COVERAGE OVER THE AREA DEFINED ON THE DRAWING.

07/03/2023 CONTRACT TDPL PAGE 8

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D3303-2 NSN: 3040-01-4340818 NOUN: ROTOR SHAFT, UPPER AFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/01/1987 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N 100% MINIMUM SHOT PEEN COVERAGE OVER THE AREA DEFINED ON THE DRAWING.

Y Y N ETCH INSPECTION SHALL SHOW NO CLASS C OR CLASS D BURNS AS IDENTIFIED IN BAC

5436 ON ANY FINAL SURFACE.

Y N N THREAD ROOT RADIUS.

Y Y N BAKE WITHIN 4 HOURS OF CADMIUM PLATING AT 275 DEGREES FAHRENHEIT PLUS OR MI

NUS 25 DEGREES FAHRENHEIT FOR A MINIMUM OF 23 HOURS, OR SRD APPROVED ALTERN

ATIVE.

Y Y N BAKE AFTER NITAL ETCH PER AMS2759/9, OR SRD APPROVED ALTERNATIVE.

Y Y N MAGNETIC PARTICLE INSPECTION PER BAC5424, OR ASTM E1444, OR SRD APPROVED EQ

UIVALENT.

Y Y N FLUORESCENT PENETRANT INSPECT THE ENTIRE THREAD LENGTH PER BAC5423, OR ASTM

E1417, OR SRD APPROVED EQUIVALENT USING TYPE I, METHOD C, SENSITIVITY LEVE

L 3 OR 4, AND DEVELOPER FORM D, PRIOR TO MAGNETIC PARTICLE INSPECTION.

07/03/2023 CONTRACT TDPL PAGE 9

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D3306-5 NSN: 1615-01-1193362 NOUN: SUPPORT ASSY, THRUST BRG

CRITICAL SAFETY ITEM: YES CSI DATE: 01/16/1987 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N ASSEMBLY CONTAINS CRITICAL SAFETY ITEMS.

Y Y N OIL PASSAGE INSPECTION PER D210-12049-1, OR EQUIVALENT. THE CRITICAL CHARAC

TERISTIC IS FOR THE OIL PASSAGE TO BE CLEAR OF ANY BURRS, OBSTRUCTIONS, OR

FOREIGN MATERIAL AS VERIFIED BY THE OIL PASSAGE INSPECTION.

07/03/2023 CONTRACT TDPL PAGE 10

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D3306-6 NSN: 1560-01-4383228 NOUN: SUPPORT, ASSY, RTRY DRVSHFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/12/2013 SERIAL NUMBER REQUIRED: NO

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N FLUORESCENT PENETRANT INSPECTION PER BAC 5423, OR ASTM E1417, OR SRD APPROV

07/03/2023 CONTRACT TDPL PAGE 11

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145DS024-13 NSN: 5330-01-1159720 NOUN: SEAL, PLAIN ENCASED

CRITICAL SAFETY ITEM: NO CSI DATE: SERIAL NUMBER REQUIRED: NO

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

FATIGUE: NO ENDURANCE: YES INTERCHANGE: NO

77272 THE BOEING COMPANY TESTED

80201 SKF USA INC. DBA SKF AEROSPACE SEALING SOLUTIONS D TESTED

07/03/2023 CONTRACT TDPL PAGE 12

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145DS027-6 NSN: 5930-01-3094365 NOUN: SWITCH, PRESSURE, LUBE

CRITICAL SAFETY ITEM: NO CSI DATE: SERIAL NUMBER REQUIRED: NO

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

02750 EATON CORPORATION (PRESSURE SENSORS DIV) TESTED

07/03/2023 CONTRACT TDPL PAGE 13

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145DS304-2 NSN: 3110-01-3343359 NOUN: BEARING, BALL, ANNULAR

CRITICAL SAFETY ITEM: YES CSI DATE: 01/08/1995 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y N N 100% VISUAL INSPECTION OF RINGS, BALLS, AND CAGE PER DRAWING REQUIREMENT.

Y N N FLUORESCENT PENETRANT INSPECTION OF CAGES PER BAC5423, OR ASTM E1417, OR SR

D APPROVED EQUIVALENT.

N Y N VISUALLY INSPECT INNER AND OUTER RINGS AND ELEMENT/CAGE ASSEMBLY IAW BEARIN

G MANUAL (TM 55-1500-322-24).

Y N N EDDY CURRENT INSPECT RACES AND BALLS PER D210-12238-1 AND DRAWING REQUIREME

NTS, OR EQUIVALENT.

Y N N ROCKWELL HARDNESS SHALL CONFORM TO RANGE SPECIFIED ON DRAWING AFTER FINAL H

EAT TREATING AND MACHINING (IF APPLICABLE) OF THE SURFACE BEING TESTED. HA

RDNESS TESTING AS SPECIFIED PER BAC5650 OR EQUIVALENT.

Y N N MAGNETIC PARTICLE INSPECTION OF RINGS PER BAC5424, OR ASTM E1444, OR SRD AP

PROVED EQUIVALENT.

Y N N ETCH INSPECTION OF RINGS AND BALLS SHALL SHOW NO CLASS C OR CLASS D BURNS A

S IDENTIFIED IN BAC 5436 ON ANY FINAL SURFACE.

07/03/2023 CONTRACT TDPL PAGE 14

PRON: 02A01595

NSN: 1680-01-3201191

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145DS304-3 NSN: 3110-01-3704844 NOUN: BEARING, BALL, ANNULAR

CRITICAL SAFETY ITEM: YES CSI DATE: 01/08/1995 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y N N MAGNETIC PARTICLE INSPECTION OF RINGS PER BAC5424, OR ASTM E1444, OR SRD AP

PROVED EQUIVALENT.

N Y N VISUALLY INSPECT INNER AND OUTER RINGS AND ELEMENT/CAGE ASSEMBLY IAW BEARIN

G MANUAL (TM 55-1500-322-24).

Y N N EDDY CURRENT INSPECT RACES AND BALLS PER D210-12238-1 AND DRAWING REQUIREME

NTS, OR EQUIVALENT.

Y N N ETCH INSPECTION OF RINGS AND BALLS SHALL SHOW NO CLASS C OR CLASS D BURNS A

S IDENTIFIED IN BAC 5436 ON ANY FINAL SURFACE.

Y N N FLUORESCENT PENETRANT INSPECTION OF CAGES PER BAC5423, OR ASTM E1417, OR SR

D APPROVED EQUIVALENT.

Y N N 100% VISUAL INSPECTION OF RINGS, BALLS, AND CAGE PER DRAWING REQUIREMENT.

Y N N ROCKWELL HARDNESS SHALL CONFORM TO RANGE SPECIFIED ON DRAWING AFTER FINAL H

EAT TREATING AND MACHINING (IF APPLICABLE) OF THE SURFACE BEING TESTED. HA

RDNESS TESTING AS SPECIFIED PER BAC5650 OR EQUIVALENT.

38443 SKF USA INC TESTED

07/03/2023 AMCOM TDPL PAGE 15

PART NUMBER: 145D3300-6

PRON NUMBER: 02A01595

NSN: 1680-01-3201191

Weapon System: A-BK NOUN: SHAFT ASSEMBLY,FLEX

Packaging Specialist: SAFFOLD, MARGUERITE S. Phone: (256)876-3622 Date: 05/18/2023

Estimated Maximum Unit Package Weight (Pounds) and Size (Inches):

Weight: 1.260.0 Length: 102.0 Width: 34.0 Depth: 36.0

[X] Quantity Per Unit Pack: 001 Intermediate Container Quantity: 000

[X] MIL-STD-129 Markings Shall Apply

[X] All Wood Packaging Material (WPM) must be ISPM-15 Compliant

[ ] Level of Preservation - Commercial / Level of Pack - Commercial in Accordance with ASTM-D-3951

[X] Level of Preservation - Military / Level of Pack - [A] in Accordance with:

[X] 1. Preservation Requirements and Packing Requirements contained in Special Packaging Instructions (SPI) Number: AHX3201191 Part Number: 145D3300-6

[ ] 2. Preservation Requirements and Packing Requirements Contained in MIL-STD-2073-1

[ ] 3. Preservation Requirements and Packing Requirements Contained in

[ ] 4. MIL-STD-2073-1 Codes, Appendix J

JI/A/MP [ ] JII/CD [ ] JIII/PM [ ] JIV/WM [ ]

JV/CD [ ] JVI/CT [ ] JVII/UC [ ] JVII/IC [ ]

JIX/A/PK [ ] JX/SM [ ] JVIIIA/OPI [ ]

[X] 5. Supplemental Information

ZZ=8145-01-128-1843; P/N 145G0031-1.

[X] 7. Reusable Container will be Contractor Furnished Material

07/03/2023 AMCOM TDPL PAGE 16

CONTRACT DATA REQUIREMENTS LIST (CDRL)

SERIAL NUMBER REQUIREMENT REPORTING (SNRR)

PART NUMBER: 145D3300-6

PRON NUMBER: 02A01595

NSN: 1680-01-3201191

| PRON: 02A01595 | PART NUMBER: 145D3300-6 | WSC: A-BK |

| A. CONTRACT LINE ITEM NO. | B. EXHIBIT | C. CATEGORY: |

| | A | TDP TM OTHER |

| D. SYSTEM/ITEM | E. CONTRACT/PR NO. | F. CONTRACTOR |

| 1. DATA ITEM NO. | 2. TITLE OF DATA ITEM | 3. SUBTITLE |

| A002 | LOGISTICS PRODUCT DATA SUMMARIES | SERIAL NUMBER REQUIREMENT|

| | | REPORTING (SNRR) |

| 4. Authority (Data Acquisition Doc No.) | 5. CONTRACT REFERENCE | 6. REQUIRING OFFICE |

| DI-SESS-81759A | SOW | AMSAM-OPL |

| SEE | REQUIRED | | SUBMISSION +----------------+----------------+

| | | | SUBMISSION | | +---------+

| A | | N/A | SEE BLK 16 | | |REG|REPRO|

| 16. REMARKS: | AMSAM-OPL | 0 | 1 | 0 |

| Block 7: Within two business days after a Government QA acceptance the | | | | | | contractor shall submit a copy of the Wide Area Work Flow (WAWF) receiving | | | | | | reports listing each Serial Number (SN) shipped via e-mail to the address | | | | | | listed below. A final receiving report for each Delivery Order (DO) and or | | | | | | contract closeout shall be via submittal to WAWF; use DODAAC W81D17 for this | | | | |

| Block 8: The Requiring Office will verify final accounting for all SNs issued | | | | | | against the contract/DO and verify that all SNs issued are accounted for. | | | | | | Any discrepancies will be identified within 5 working days after receipt and | | | | | | comments provided to the contractor. If discrepancies exist the contractor | | | | | | shall correct errors and resubmit within 10 working days after receipt of the | | | | |

07/03/2023 AMCOM TDPL PAGE 17

CONTRACT DATA REQUIREMENTS LIST

SERIAL NUMBER REQUIREMENT REPORTING (SNRR)

PART NUMBER: 145D3300-6

PRON NUMBER: 02A01595

NSN: 1680-01-3201191

| Blocks 10 & 12: The contractor shall provide data based on delivery schedules/ | | | | | | contract requirements. | | | | | | Block 14: | | | | | | Inital SN request for issue/approval shall be via contractors use of the SNRR | | | | | | module on the TAMMS-A/MCDS web portal https://tamms-a.redstone.army.mil. If | | | | | | the web portal is unavailable or the contractor does not currently have a MCDS | | | | | | account, see the Statement of Work for additional instructions. | | | | | | Commander, U.S. Army Aviation and Missile Command | | | | |

| Redstone Arsenal, Alabama 35898-5230 | | | | | | E-mail; usarmy.redstone.amcom.mlx.immc-snrr@mail.mil | | | | | | Fax; (256) 876-3574 ATTN: SNRR Staff | | | | |

| | 15. TOTAL | 0 | 1 | 0 |

| STAGGS, AMANDA C. | 12/30/2019 | STAGGS, AMANDA C. | 12/30/2019 |

| 17. PRICE GROUP | 18. ESTIMATED TOTAL PRICE |

| | INSERT IN SECT. B |

AMCOM TDPL PAGE 18

SERIAL NUMBER REQUIREMENT REPORTING (SNRR) SPARES STATEMENT OF WORK (SOW)

PART NUMBER: 145D3300-6

PRON NUMBER: 02A01595

NSN: 1680-01-3201191

Serial Number Reporting Requirement (SNRR) Spares Statement of Work (SOW)

This SNRR Spares SOW covers the issue, approval, and final disposition reporting for the Serial Number Reporting Requirements (SNRR) items identified as aviation Critical Safety Items (CSI), Flight Safety Critical Aircraft Parts (FSCAP), The Army Maintenance Management System-Aviation (TAMMS-A) reportable items, or other components requiring assignment and approval of Serial Numbers (SN), identified within the contract or Technical Data Package (TDP).

The contractor shall use the SNRR module on the TAMMS-A Maintenance Consolidated Data System (TAMMS-A/MCDS) web portal at https://tammsa.redstone.army.mil to submit contractor developed SN's, or to receive web generated SN's when the contractor does not develop their own serial numbers. Information on accessing the web portal can be found at https://tamms-a.redstone.army.mil.

If the web portal is unavailable or the contractor currently does not have a TAMMS-A/MCDS account, contact the AMCOM G3, CAMRD, TAMMS-A Implementation & Compliance Office (SNRR) for alternate instructions. Send all requests for alternate instructions to usarmy.redstone.amcom.mbx.immc-snrr@mail.mil. Requests should include company and contract information, justification for waiver, and point of contact information.

SNs may be up to a maximum of 18 alphanumerica digits: e.g., 35721B1RD4MD000222. Alphanumeric capability is limited only to the size of the serialized component and/or data place. A SN shall not begin with zero (0), or contain the letters O, I, Z, L, or J (upper or lower case).

A SN, once assigned, shall not be altered or changed during the life cycle of the equipment while under the United States Army property accountability system for any reason without prior written approval from the ALC, TAMMS-A Implementation & Compliance Office (SNRR). Nor shall the contractors reuse a SN assigned to a part that is scrapped prior to delivery, sold commercially, sold to Foreign Military Sales (FMS), or Other Government Agencies (OGA).

SNRR approval/reporting requirements applies to all SNRR reportable item(s) to be delivered under this contract including subcomponent(s) of the item(s), whether produced by the contractor or by a sub-contractor. If item(s) are Government Furnished Property (GFP) no reporting is required.

The SNRR module also has the capability to generate Item Unique Identification (IUID) numbers as part of the serialziation process. Contractors may use the IUID functionality within the SNRR module. IUID numbers created within the SNRR program meet all DoD requirements and are automatically submitted to the DoD IUID registry.

The requirement for IUID does not change or eliminate the serialization requirements or serialization reporting requirements to AMCOM. Serial number requirements are separate from IUID requirements; however, the SNs may be a part of the Unique Item Identification (UII).

For each shipment of items requiring SNRR data under this contract/delivery order, the contractor shall submit a Government QA signed copy of the Wide Area Work Flow (WAWF) Receiving Report via e-mail to the SNRR office listing all serial numbers shipped.

A final receiving report for each Delivery Order (DO) and/or contract closeout shall be via submittal to WAWF; use DODAAC W81D17. The SNRR Office will complete a final verification between contracted and reported quantities prior to contract or DO closeouts.

07/03/2023 AMCOM TDPL PAGE 19

THE ARMY MAINTENANCE MANAGEMENT SYSTEM-AVIATION (TAMMS-A)

PART NUMBER: 145D3300-6

PRON NUMBER: 02A01595

NSN: 1680-01-3201191

| PRON: 02A01595 | PART NUMBER: 145D3300-6 | WSC: A-BK |

| A. CONTRACT LINE ITEM NO. | B. EXHIBIT | C. CATEGORY: |

| | A | TDP TM OTHER |

| D. SYSTEM/ITEM | E. CONTRACT/PR NO. | F. CONTRACTOR |

| 1. DATA ITEM NO. | 2. TITLE OF DATA ITEM | 3. SUBTITLE |

| A001 | LOGISTICS PRODUCT DATA | THE ARMY MAINTENANCE |

| | | MANAGEMENT SYSTEM- |

| | | AVIATION (TAMMS-A) |

| 4. Authority (Data Acquisition Doc No.) | 5. CONTRACT REFERENCE | 6. REQUIRING OFFICE |

| DI-SESS-81758A | SOW | AMSAM-OPL |

| | REQUIRED | | SUBMISSION +----------------+----------------+

| | | | SUBMISSION | | +---------+

| A | | N/A | SEE BLK 16 | | |REG|REPRO|

| 16. REMARKS: | AMSAM-OPL | 0 | 1 | 0 |

| Block 8: The Requiring Office will verify final accounting for all TAMMS-A | | | | | | data reported against the contract/DO and verify that all TAMMS-A data has | | | | | | received. Any discrepancies will be identified within 5 working days after | | | | | | receipt and comments provided to the contractor. The contractor shall | | | | |

| correct errors and resubmit within 10 working days after receipt of the | | | | | | requiring office comments. | | | | |

07/03/2023 AMCOM TDPL PAGE 20

THE ARMY MAINTENANCE MANAGEMENT SYSTEM-AVIATION (TAMMS-A)

PART NUMBER: 145D3300-6

PRON NUMBER: 02A01595

NSN: 1680-01-3201191

| Blocks 10 & 12: The contractor shall provide data based on delivery schedules/ | | | | | | contract requirements. | | | | | | Block 14: | | | | | | Inital TAMMS-A submittal/approval shall be via contractor use of the TAMMS-A/ | | | | | | MCDS web portal https://tamms-a.redstone.army.mil. If the web portal is | | | | | | unavailable or the contractor currently does not have a TAMMS-A/MCDS account, | | | | | | see the Statement of Work for additional instructions. | | | | | | Commander, U.S. Army Aviation and Missile Command | | | | |

| | 15. TOTAL | 0 | 1 | 0 |

| STAGGS, AMANDA C. | 12/30/2019 | STAGGS, AMANDA C. | 12/30/2019 |

| 17. PRICE GROUP | 18. ESTIMATED TOTAL PRICE |

| | INSERT IN SECT. B |

AMCOM TDPL PAGE 21

THE ARMY MAINTENANCE MANAGEMENT SYSTEM-AVIATION (TAMMS-A) SPARES STATEMENT OF WORK (SOW)

PART NUMBER: 145D3300-6

PRON NUMBER: 02A01595

NSN: 1680-01-3201191

The Army Maintenance Management System-Aviation (TAMMS-A) Spares Statement of Work (SOW)

This TAMMS-A Spares SOW covers process and preparation instructions for The Army Maintenance and Management System- Aviation (TAMMS-A) items identified in the contract or Technical Data Package (TDP) as requiring TAMMS-A reporting.

The contractor shall use the TAMMS-A Maintenance Consolidated Database System (TAMMS-A/MCDS) web portal at https://tamms-a.redstone.army.mil to generate/print DA Forms: 2410, 2408-16 and 2408-16-1. The use of the web portal eliminates the requirement for the contractor to mail copies of these forms to AMCOM; it does not eliminate the requirement to ship copies of the required TAMMS-A form with the components/assemblies. Information on accessing the web portal can be found at https://tamms-a.redstone.army.mil.

If the TAMMS-A/MCDS web portal is unavailable or the contractor does not have a TAMMS-A/MCDS account, contact the AMCOM G3, CAMRD, TAMMS-A Implementation & Compliance Office for alternate instructions. The contractor shall send all requests for alternate instructions to usarmy.redstone.amcom.mbx.immc-snrr@mail.mil. Requests should include company and contract information, justification for waiver, and point of contact information.

DA PAM 25-33 User’s Guide for Army Publications and Forms (paragraph 2-9), provides guidance for obtaining all forms, tags, labels and manuals for use on government contracts. The contractor shall complete and send DA Form 4790-R to the Government Contracting Officerto obtain all forms, tags, labels and manuals needed to meet the contract requirements.

For items delivered under this contract, the contractor shall prepare TAMMS-A forms, records, tags, and labels IAW the directions for completion given in DA PAM 738-751 (Functional Users Manual for The Army Maintenance Management System-Aviation (TAMMS-A). This includes all TAMMS-A forms and records required for each major assembly and/or sub-component listed in TB 1-1500-341-01 (Aircraft Components Requiring Maintenance Management and Historical Data Reports). The most current and accurate TB 1-1500-341-01 information is available on the Legitimate Code File application located on the TAMMS-A/MCDS web portal. If the item(s) currently being procured has a later Part Number (PN) than the item listed in the TB, the contractor shall prepare a DA Form 2410.

As a minimum, the following forms are required:

DA Form 2410: A gain copy shall be completed to show a gain to the Army inventory. This form is automatically completed and entered into the TAMMS-A/MCDS program during the Serial Number Reporting Requirements (SNRR) process when the TAMMS-A/MCDS web portal is used. A duplicate 2410, listing basic component identification information in section II shall be shipped with the item. This duplicate form is available for printing during the SNRR process when the TAMMS-A/MCDS web portal is used. For any TAMMS-A reported item/sub-component shipped as part of a major component/assembly, the Install DA Form 2410 for that sub-component shall be entered into the TAMMS-A/MCDS and not shipped with the major component/assembly. When SNRR is used the sub-component install DA Form 2410 is automatically generated for the sub-component and inserted into the TAMMS-A/MCDS program. If the TAMMS-A/MCDS web portal is not used, the Instillation copy for installed reportable items/sub-components shall be forwarded to AMCOM in accordance with paragraph three above.

DA Form 2408-16: Required for any major component/assembly that has TAMMS-A reporting item/sub-components installed when shipped. All reported item/sub-components will be listed on the DA Form 2408-16. A copy of the form shall be shipped with the major component/assembly when the form is required.

DD Form 1574 Serviceable Tag Materiel, and DD Form 1574-1 Serviceable Label-Materiel. A DD Form 1574 shall be attached to each part shipped that requires TAMMS-A tracking, and a DD Form 1574-1 shall be affixed to the shipping container in a manner that prevents weather damage and fading. When a TAMMS-A tracked component is part of a TAMMS-A tracked assembly, only the assembly will be tagged.

07/03/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 145D3407-9 WPN SYS: A-BK

PRON NUMBER: 07A00279

NSN: 1615-01-1140845

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

07/03/2023 CONTRACT TDPL PAGE 2

PART NUMBER: 145D3407-9

PRON: 07A00279

NSN: 1615-01-1140845

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 114D3053-1 NSN: 5306-00-8776434 NOUN: BOLT, INTERNALLY RELIEVED

CRITICAL SAFETY ITEM: YES CSI DATE: 01/21/1992 SERIAL NUMBER REQUIRED: NO

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y N N HARDNESS RC 32 TO 39 FOR 15-5 PH AMS 5659, CONDITION H1100 (STDP)

Y N N HARDNESS RC 24 TO 32 FOR 416 CRES ASTM A582, CONDITION T (DRWG)

07/03/2023 CONTRACT TDPL PAGE 3

PRON: 07A00279

NSN: 1615-01-1140845

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 114DS344-1 NSN: 1615-01-5677013 NOUN: PLATE ASSY, DRIVE SHAFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/05/1987 SERIAL NUMBER REQUIRED: NO

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

46HD1 REXNORD INDUSTRIES DBA AUBURN COUPLINGS PLANT

07/03/2023 CONTRACT TDPL PAGE 4

PRON: 07A00279

NSN: 1615-01-1140845

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 114DS344-2 NSN: 5365-00-8596162 NOUN: PLATE, DRIVE SHAFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/17/1998 SERIAL NUMBER REQUIRED: NO

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y N N ROCKWELL HARDNESS SHALL CONFORM TO RANGE SPECIFIED ON DRAWING AFTER FINAL H

07/03/2023 CONTRACT TDPL PAGE 5

PRON: 07A00279

NSN: 1615-01-1140845

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 114DS344-3 NSN: 5365-00-8596161 NOUN: PLATE, DRIVE SHAFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/17/1998 SERIAL NUMBER REQUIRED: NO

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y N N ROCKWELL HARDNESS SHALL CONFORM TO RANGE SPECIFIED ON DRAWING AFTER FINAL H

07/03/2023 CONTRACT TDPL PAGE 6

PRON: 07A00279

NSN: 1615-01-1140845

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D3401-2 NSN: 3010-01-4375697 NOUN: ADAPTER, SPLINED, AFT XMSN

CRITICAL SAFETY ITEM: YES CSI DATE: 01/16/1987 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N BAKE WITHIN 4 HOURS OF CADMIUM PLATING AT 275 DEGREES FAHRENHEIT PLUS OR MI

NUS 25 DEGREES FAHRENHEIT FOR A MINIMUM OF 23 HOURS, OR SRD APPROVED ALTERN

ATIVE.

Y Y N 100% MINIMUM SHOT PEEN COVERAGE OVER THE AREA DEFINED ON THE DRAWING.

Y N N ETCH INSPECTION SHALL SHOW NO CLASS C OR CLASS D BURNS AS IDENTIFIED IN BAC

5436 ON ANY FINAL SURFACE.

Y N N BAKE AFTER NITAL ETCH PER AMS2759/9, OR SRD APPROVED ALTERNATIVE.

Y Y N MAGNETIC PARTICLE INSPECTION PER BAC5424, OR ASTM E1444, OR SRD APPROVED EQ

UIVALENT.

07/03/2023 CONTRACT TDPL PAGE 7

PRON: 07A00279

NSN: 1615-01-1140845

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D3407-9 NSN: 1615-01-1140845 NOUN: ADAPTER ASSY, DRIVE SHAFT

CRITICAL SAFETY ITEM: YES CSI DATE: 01/01/1987 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N BALANCE WITHIN THE LIMITS CALLED OUT ON THE DRAWING. READINGS FROM THE BALA

NCING OF THE COMPONENT SHALL BE RECORDED BY SERIAL NUMBER AND PART NUMBER.

Y Y N TORQUE NUT (BACN10RJ9N) ONTO BOLT (145DS306-1 OR 114D3053-1) TO 1000-1100 I

N-LBS (WET). TURN NUT ONLY. HOLD BOLT HEAD FIRMLY TO PREVENT BOLT FROM TURN

ING. LUBRICATE ALL THREADS WITH OIL (DOD-PRF-85734, MIL-PRF-7808, OR MIL-PR

F-23699).

07/03/2023 AMCOM TDPL PAGE 8

PART NUMBER: 145D3407-9

PRON NUMBER: 07A00279

NSN: 1615-01-1140845

Weapon System: A-BK NOUN: ADAPTER ASSY,SHAFT

Packaging Specialist: SAFFOLD, MARGUERITE S. Phone: (256)876-3622 Date: 05/18/2023

Estimated Maximum Unit Package Weight (Pounds) and Size (Inches):

Weight: 28.0 Length: 17.0 Width: 17.0 Depth: 14.0

[X] Quantity Per Unit Pack: 001 Intermediate Container Quantity: 000

[X] MIL-STD-129 Markings Shall Apply

[X] All Wood Packaging Material (WPM) must be ISPM-15 Compliant

[ ] Level of Preservation - Commercial / Level of Pack - Commercial in Accordance with ASTM-D-3951

[X] Level of Preservation - Military / Level of Pack - [A] in Accordance with:

[ ] 1. Preservation Requirements and Packing Requirements contained in Special Packaging Instructions (SPI) Number: Part Number:

[ ] 2. Preservation Requirements and Packing Requirements Contained in MIL-STD-2073-1

[ ] 3. Preservation Requirements and Packing Requirements Contained in

[X] 4. MIL-STD-2073-1 Codes, Appendix J

JI/A/MP [44] JII/CD [1] JIII/PM [ZZ] JIV/WM [GH]

JV/CD [NA] JVI/CT [A] JVII/UC [ZZ] JVII/IC [00]

JIX/A/PK [F] JX/SM [17] JVIIIA/OPI [M]

[X] 5. Supplemental Information

ZZ= UC- 8145-00-519-6384;13414-029; PM-06 ON SHAFT.

[X] 7. Reusable Container will be Contractor Furnished Material

07/03/2023 AMCOM TDPL PAGE 9

SERIAL NUMBER REQUIREMENT REPORTING (SNRR)

PART NUMBER: 145D3407-9

PRON NUMBER: 07A00279

NSN: 1615-01-1140845

| PRON: 07A00279 | PART NUMBER: 145D3407-9 | WSC: A-BK |

| A. CONTRACT LINE ITEM NO. | B. EXHIBIT | C. CATEGORY: |

| | A | TDP TM OTHER |

| D. SYSTEM/ITEM | E. CONTRACT/PR NO. | F. CONTRACTOR |

| 1. DATA ITEM NO. | 2. TITLE OF DATA ITEM | 3. SUBTITLE |

| A002 | LOGISTICS PRODUCT DATA SUMMARIES | SERIAL NUMBER REQUIREMENT|

| | | REPORTING (SNRR) |

| 4. Authority (Data Acquisition Doc No.) | 5. CONTRACT REFERENCE | 6. REQUIRING OFFICE |

| DI-SESS-81759A | SOW | AMSAM-OPL |

| SEE | REQUIRED | | SUBMISSION +----------------+----------------+

| | | | SUBMISSION | | +---------+

| A | | N/A | SEE BLK 16 | | |REG|REPRO|

| 16. REMARKS: | AMSAM-OPL | 0 | 1 | 0 |

07/03/2023 AMCOM TDPL PAGE 10

SERIAL NUMBER REQUIREMENT REPORTING (SNRR)

PART NUMBER: 145D3407-9

PRON NUMBER: 07A00279

NSN: 1615-01-1140845

| Redstone Arsenal, Alabama 35898-5230 | | | | | | E-mail; usarmy.redstone.amcom.mlx.immc-snrr@mail.mil | | | | | | Fax; (256) 876-3574 ATTN: SNRR Staff | | | | |

| | 15. TOTAL | 0 | 1 | 0 |

| STAGGS, AMANDA C. | 05/10/2023 | STAGGS, AMANDA C. | 05/10/2023 |

| 17. PRICE GROUP | 18. ESTIMATED TOTAL PRICE |

| | INSERT IN SECT. B |

AMCOM TDPL PAGE 11

SERIAL NUMBER REQUIREMENT REPORTING (SNRR) SPARES STATEMENT OF WORK (SOW)

PART NUMBER: 145D3407-9

PRON NUMBER: 07A00279

NSN: 1615-01-1140845

Serial Number Reporting Requirement (SNRR) Spares Statement of Work (SOW)

07/03/2023 AMCOM TDPL PAGE 12

THE ARMY MAINTENANCE MANAGEMENT SYSTEM-AVIATION (TAMMS-A)

PART NUMBER: 145D3407-9

PRON NUMBER: 07A00279

NSN: 1615-01-1140845

| PRON: 07A00279 | PART NUMBER: 145D3407-9 | WSC: A-BK |

| A. CONTRACT LINE ITEM NO. | B. EXHIBIT | C. CATEGORY: |

| | A | TDP TM OTHER |

| D. SYSTEM/ITEM | E. CONTRACT/PR NO. | F. CONTRACTOR |

| 1. DATA ITEM NO. | 2. TITLE OF DATA ITEM | 3. SUBTITLE |

| A001 | LOGISTICS PRODUCT DATA | THE ARMY MAINTENANCE |

| | | MANAGEMENT SYSTEM- |

| | | AVIATION (TAMMS-A) |

| 4. Authority (Data Acquisition Doc No.) | 5. CONTRACT REFERENCE | 6. REQUIRING OFFICE |

| DI-SESS-81758A | SOW | AMSAM-OPL |

| | REQUIRED | | SUBMISSION +----------------+----------------+

| | | | SUBMISSION | | +---------+

| A | | N/A | SEE BLK 16 | | |REG|REPRO|

| 16. REMARKS: | AMSAM-OPL | 0 | 1 | 0 |

| correct errors and resubmit within 10 working days after receipt of the | | | | | | requiring office comments. | | | | |

07/03/2023 AMCOM TDPL PAGE 13

THE ARMY MAINTENANCE MANAGEMENT SYSTEM-AVIATION (TAMMS-A)

PART NUMBER: 145D3407-9

PRON NUMBER: 07A00279

NSN: 1615-01-1140845

| | 15. TOTAL | 0 | 1 | 0 |

| STAGGS, AMANDA C. | 05/10/2023 | STAGGS, AMANDA C. | 05/10/2023 |

| 17. PRICE GROUP | 18. ESTIMATED TOTAL PRICE |

| | INSERT IN SECT. B |

AMCOM TDPL PAGE 14

THE ARMY MAINTENANCE MANAGEMENT SYSTEM-AVIATION (TAMMS-A) SPARES STATEMENT OF WORK (SOW)

PART NUMBER: 145D3407-9

PRON NUMBER: 07A00279

NSN: 1615-01-1140845

The Army Maintenance Management System-Aviation (TAMMS-A) Spares Statement of Work (SOW)

As a minimum, the following forms are required:

07/03/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 145D5307-9 WPN SYS: A-BK

PRON NUMBER: 02A00137

NSN: 3040-01-3634365

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

07/03/2023 AMCOM TDPL PAGE 2

PART NUMBER: 145D5307-9

PRON NUMBER: 02A00137

NSN: 3040-01-3634365

Weapon System: A-BK NOUN: HOUSING,MECHANICALD

Packaging Specialist: HUNTER, EDWARD L Phone: (256)876-3577 Date: 10/19/2017

Estimated Maximum Unit Package Weight (Pounds) and Size (Inches):

Weight: 18 Length: 20 Width: 20 Depth: 15

[X] Quantity Per Unit Pack: 001 Intermediate Container Quantity: 000

[X] MIL-STD-129 Markings Shall Apply

[X] All Wood Packaging Material (WPM) must be ISPM-15 Compliant

[ ] Level of Preservation - Commercial / Level of Pack - Commercial in Accordance with ASTM-D-3951

[X] Level of Preservation - Military / Level of Pack - [B] in Accordance with:

[ ] 1. Preservation Requirements and Packing Requirements contained in Special Packaging Instructions (SPI) Number: Part Number:

[ ] 2. Preservation Requirements and Packing Requirements Contained in MIL-STD-2073-1

[ ] 3. Preservation Requirements and Packing Requirements Contained in

[X] 4. MIL-STD-2073-1 Codes, Appendix J

JI/A/MP [42] JII/CD [1] JIII/PM [ZZ] JIV/WM [GB]

JV/CD [NA] JVI/CT [B] JVII/UC [ED] JVII/IC [00]

JIX/A/PK [F] JX/SM [00] JVIIIA/OPI [M]

[X] 5. Supplemental Information

ZZ=06 ON BARE AREA

[ ] 7. Reusable Container will be Contractor Furnished Material

06/29/2023 CONTRACT TDPL PAGE 1

PART NUMBER: 145D6303-6 WPN SYS: A-BK

PRON NUMBER: 23A00343

NSN: 1615-01-6170540

PRODUCT DRAWINGS AND ASSOCIATED LISTS

DT CAGE DOCUMENT NUMBER REV SEC SHEET # DOCUMENT STATUS SEE

NOMENCLATURE DT ACCOMP DOC ID REV LEGEND

06/29/2023 CONTRACT TDPL PAGE 2

PART NUMBER: 145D6303-6

PRON: 23A00343

NSN: 1615-01-6170540

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D6303-5 NSN: 1650-01-6920671 NOUN: HOUSING, ENG XSMN

CRITICAL SAFETY ITEM: YES CSI DATE: 01/13/2020 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N FLUORESCENT PENETRANT INSPECTION PER BAC 5423, OR ASTM E1417, OR SRD APPROV

06/29/2023 CONTRACT TDPL PAGE 3

PART NUMBER: 145D6303-6

PRON: 23A00343

NSN: 1615-01-6170540

CRITICAL SAFETY ITEMS AND ENGINEERING/NEW SOURCE TESTING SUMMARY

PART NUMBER: 145D6303-6 NSN: 1615-01-6170540 NOUN: HOUSING ASSY, ENG XSMN

CRITICAL SAFETY ITEM: YES CSI DATE: 01/13/2020 SERIAL NUMBER REQUIRED: YES

CRITICAL CHARACTERISTICS: (MANUFACTURE/INSTALLATION/DEPOT CRITICAL):

M D I DESCRIPTION

Y Y N ASSEMBLY CONTAINS CRITICAL SAFETY ITEMS.

Y Y N OIL PASSAGE INSPECTION PER D210-12049-1, OR EQUIVALENT. THE CRITICAL CHARAC

TERISTIC IS FOR THE OIL PASSAGE TO BE CLEAR OF ANY BURRS, OBSTRUCTIONS, OR

FOREIGN MATERIAL AS VERIFIED BY THE OIL PASSAGE INSPECTION.

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jul 3, 2023.