Encl 1-FY24 DCMA Saratoga Test Station-FC Data Analysis System Refresh FC Test BOA SOW ONLY_R2.docx

Section C- Description and Specifications

STATEMENT OF WORK

CLIN 0001 – Saratoga Test Station Refresh – (Completion) (CPFF) - OMN The Contractor shall procure and integrate hardware and software necessary to refresh and operationally proof the Saratoga Test Station. In support of these efforts, the contractor will integrate and test the revised hardware and software with the existing test station, update the drawing package, update OD 51812, Rev 3, Converted, Power 115 Volts, 60 Hertz to 28 Volts Direct Current Quality Assurance Procedure, conduct a physical configuration audit, and operationally proof the revised test station. The contractor shall:

1. Deliver an updated Technical Data Package.

2. Deliver the Saratoga Test Station Operational Proofing Report.

CLIN 0002 – Fire Control Data Analysis System Refresh – (Completion) (CPFF) - OMN The contractor shall integrate the Johns Hopkins University Applied Physics Laboratory (JHU-APL) Fire Control data processing capabilities into an updated Fire Control Data Analysis System (FDAS) for processing data from the Fire Control System (FCS) Mk 98 Mod 6/7. The contractor shall deliver:

1. Design Documentation in contractor format.

2. Installation and User Manual in contractor format.

3. FDAS Processing Station Kit.

4. FDAS Spares Kit.

5. Report on Proofing with SSBN Data in contractor format.

CLIN 0003 – Fire Control Test Description & Fault Code Decoder – (LOE) (CPFF) - OMN From the period of award through 12 months thereafter, the contractor shall analyze the Fire Control System and deliver a report of Fire Control tests that will be considered for further generation of test descriptions and associated fault/fail codes. The test descriptions and fault/fail codes will be evaluated for complexity during the period of performance and a Plan of Action & Milestones (POAM) reflecting the year-by-year plan will be delivered. At least one test description will be delivered.

The contractor shall deliver:

1. Report of Fire Control Tests and Fault/Fail codes requiring evaluation and documentation.

2. POAM that will reflect the year-by-year plan for execution of future efforts.

3. Deliver at least one Test Description.

4. Final Report including all Test Descriptions and Fault/Fail codes captured and defined during the period of performance of this CLIN.

5. Post Completion Report of Hours and Cost Expended.

CLIN 0004 – Contract Data Requirements List (Not Separately Priced) The Contractor shall furnish all supplies and/or services listed under Exhibit A, as set forth under the CLINs specified in Section B of the schedule, in accordance with the stated instructions and specifications.