EDRNSN9987.pdf
PDF 105 KB Posted
- Attached to
- Fuel Cells Federal contract opportunity
- Solicitation number
- SPRHA4-22-R-0745
- Issued by
- Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of a fuel tank fuseleage component and identifies related federal contract opportunity requirements. Specifically, it outlines specifications and standards for a forward fuel tank with part number 16VB004001-3 and national stock number 1560-01-322-9987. The associated solicitation from the Defense Logistics Agency Aviation seeks offers for 62 units of the above fuel tank as well as 23 units of another fuel tank with national stock number 1560-01-224-0803. Interested offerors should contact the point of contact Dennis Bouy by email. Requirements include following source control drawings and obtaining approval for any deviations, applying Item Unique Identification markings meeting certain standards on human readable and machine readable labels, and revising drawings as needed for IUID compliance.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA422R0745_______0002.pdf | ||
| SPRHA422R0745_______0001.pdf | ||
| SPRHA422R0745.pdf | ||
| SPINSN9987.pdf | ||
| EDRNSN0803.pdf | ||
| SPINSN0803.pdf | ||
| SQSNSN9987.pdf | ||
| EDLNSN0803.pdf | ||
| CDRLFATRNSN9987.pdf | ||
| CDRLFATRNSN0803.pdf | ||
| SQSNSN0803.pdf | ||
| EDLNSN9987.pdf |
Show all 12
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
FUEL TANK, FUSELAGE SGL PL ACFT, FWD REM
2. PART NUMBER:
16VB004001-3
3. NATIONAL STOCK NUMBER:
1560-01-322-9987WF
PREPARED BY:
DONALD WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
10/2/2018
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING.
7. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
8. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE
EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
File details come from the government source that posted it. Updated .