EDR2554.pdf
PDF 51 KB Posted
- Attached to
- SIGNAL RECORDERS AND CCAS
- Solicitation number
- SPRHA24Q0240
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document is an engineering data requirements sheet outlining specifications for a recorder assembly for the F-16 flight control system. It provides the part number and national stock number for the assembly. The sheet specifies that military specifications and standards will not be furnished with bid sets. It lists applicable specifications and standards that will be used in lieu of superseded data. Any deviations from control drawings or use of non-specified sources/materials require approval from the cognizant engineering activity. Marking must follow MIL-STD-130 instead of FPS-3008. Notification is required for any use of lead-free solder, plating, or components per the stated conditions. Certification of compliance with no lead-free materials is also required. Contact for matters related to this is the Engineering Support Activity. The related federal contract opportunity is solicitation SPRHA24Q0240 for signal recorders and circuit card assemblies from the Defense Logistics Agency Aviation.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SQS4888.pdf | ||
| EDL4888.pdf | ||
| SPRHA424Q0240.pdf | ||
| SQS2554.pdf | ||
| CDRLCPP.pdf | ||
| EDR4888.pdf | ||
| EDL2554.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RECORDER ASSEMBLY- FLIGHT CONTROL SYSTEM. F-16
2. PART NUMBER:
16VC040-3
3. NATIONAL STOCK NUMBER:
6625-01-331-2554WF
PREPARED BY:
JONATHAN TUCHOW
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
3 DECEMBER 2021
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.
8. THE USE OF LEAD-FREE SOLDER OR LEAD-FREE PLATED COMPONENTS IN MILITARY ELECTRONIC PRODUCTS IS CONSIDERED A FLIGHT SAFETY AND NATIONAL SECURITY CONCERN. FOR THIS REASON THE US AIR FORCE WANTS TO BE NOTIFIED WHEN LEAD-FREE COMPONENTS AND MANUFACTURING PROCESSES HAVE BEEN IMPLEMENTED. AS PART OF SATISFACTORY COMPLIANCE WITH THE REQUIREMENTS OF THIS CONTRACT THE US AIR FORCE REQUIRES
NOTIFICATION ON A NO-COST BASIS WHEN ANY OF THE FOLLOWING CONDITIONS EXIST:
1. COMMERCIAL OFF-THE-SHELF (COTS) OR ANY OTHER ELECTRICAL COMPONENTS THAT CONTAIN LEAD-FREE
SOLDER OR LEAD-FREE PLATED COMPONENTS ARE USED IN THE END-ITEM.
2. ANY LEAD-FREE COMPONENT OR PART USED TO MANUFACTURE THE END ITEM THAT IS NOT IDENTIFIED
WITH A SEPARATE PART NUMBER OR DESIGNATION.
9. IF NO LEAD-FREE, LEAD-FREE PLATED COTS OR ANY OTHER LEAD-FREE ELECTRICAL OR ELECTRONICS COMPONENTS EXIST IN THE MANUFACTURED END-ITEM, THE CONTRACTOR SHALL PROVIDE WRITTEN CERTIFICATION
OF COMPLIANCE AS A DELIVERABLE WITH THE CONTRACT.
1. USE INDUSTRY STANDARD IPC-1066, "MARKING, SYMBOLS AND LABELS FOR IDENTIFICATION OF LEAD-FREE
AND OTHER REPORTABLE MATERIALS IN LEAD-FREE ASSEMBLIES, COMPONENTS AND DEVICES,"
2. INCLUDE THE PROGRAM ENGINEER'S EVALUATION OF THE PURCHASING/REPAIR ITEM FOR ANY "LEAD-FREE" MILITARY PART(S) IN REFERENCE TO ITS' RELIABILITY, PERFORMANCE AND COMPATIBILITY FOR THE SYSTEM.
10. POC FOR THIS MATTER IS THE ENGINEERING SUPPORT ACTIVITY (ESA).
File details come from the government source that posted it. Updated .