EDR1029.pdf
PDF 62 KB Posted
- Attached to
- F-16 Flap, Wing Dive Brake Federal contract opportunity
- Solicitation number
- SPRHA4-23-R-0135
- Issued by
- Defense Logistics Agency Aviation
About this file
This document contains engineering data requirements for the manufacture of a flap, wing-leading edge maneuver assembly. It specifies part numbers, national stock numbers, applicable military standards and specifications for the component. The related federal contract opportunity is seeking bids for two flap assemblies with national stock number 1560012821028WF and ten flap assemblies with national stock number 1560012821029WF. Bids are to follow the technical data package link provided and contact information is given for any issues accessing the data. The Defense Logistics Agency Aviation is the contracting agency.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA423R0135_______0003.pdf | ||
| SPRHA423R0135_______0002.pdf | ||
| SPRHA423R0135_______0001.pdf | ||
| EDR1028.pdf | ||
| MQR.pdf | ||
| EDL1029.pdf | ||
| EDL1028.pdf | ||
| SPI.pdf | ||
| CDRLFATR.pdf | ||
| SOW.pdf | ||
| SPRHA423R0135.pdf |
Show all 11
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
FLAP, WING-LEADING EDGE MANEUVER, ASSY
2. PART NUMBER:
16W1022-812
3. NATIONAL STOCK NUMBER:
1560-01282-1029WF
PREPARED BY:
Tim Lucas
OFFICE SYMBOL:
416SCMS/GUEAA
DATE:
02 Dec 2022
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY OO-ALC COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING.
7. USE MIL-STD-130 IN LIEU OF FPS-3008.
8. 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA 16W329-8, 16W391-8, 16W1330-10 FOR THE MANUFACTURE OF
16W1022-812.
9. MASTER TOOLING IS REQUIRED TO MAKE THIS PART. THE GOVERNMENT DOES NOT HAVE ACCESS TO THIS MASTER
TOOLING. ANY MANUFACTURERS WHO WISHES TO OBTAIN THIS TOOLING MUST CONTACT LOCKHEED MARTIN CO.
10. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
A. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
B. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY DELETE
EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
C. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
D. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
E. IUID MARKING MUST BE PERMANENT.
F. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
I. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
11. 16PR100 IS NOT REQUIRED FOR MANUFACTURE AND WILL NOT BE FURNISHED.
12. DELIVER PARTS IN THE PRIMED CONDITION. DO NOT APPLY FINISHED PAINT COATING.
File details come from the government source that posted it. Updated .