EDR0844.pdf
PDF 14 KB Posted
- Solicitation number
- SPRHA4-26-R-0111
- Issued by
-
Defense Logistics Agency Aviation
About this file
This Engineering Data Requirements document provides technical specifications for a Circuit Card Assembly with two part numbers: 2218315-001 and 2215265-001, National Stock Number 5998-01-384-0844. The document details Item Unique Identifier (IUID) requirements for the contractor, including specific marking guidelines that must be followed:
The IUID marking specifications mandate using both human-readable and machine-readable matrices with precise requirements. For human-readable markings, contractors must use minimum 1/8 inch lettering including Cage code (17V), Part Number (1P), and Serial Number (IS). Machine-readable markings must be a minimum 1/4 inch square 2D matrix containing the same information. The document emphasizes that any deviations from specifications require prior approval from 416 SCMS/GUEAA Engineering, and mandates compliance with standards including MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418. The document was prepared by Curtis Blanco from 416 SCMS/GUEAA on 17 March 2016.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA426R0111_______0001.pdf | ||
| CDRLCPP.pdf | ||
| EDL8585.pdf | ||
| SOW.pdf | ||
| EDL0844.pdf | ||
| SPRHA426R0111.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1.THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
Circuit Card Assembly
2. PART NUMBER:
2218315-001 // 2215265-001
3. NATIONAL STOCK NUMBER:
5998-01-384-0844
PREPARED BY:
Curtis Blanco
OFFICE SYMBOL:
416 SCMS / GUEAA
DATE:
17Mar2016,Thu
HILL AFB FORM 462 Page 1 of 1
Deviations from specifications identified in drawings or this document are not authorized without prior approval by 416 SCMS/GUEAA Engineering.
IUID (Item Unique Identifier) requirements and expectations which the contractor must ensure are complied with.
a. Contractors drawings shall be changed or supplemented by contractor for IUID compliance.
b.. Label shall contain all data on existing label, (if existing label is to be replaced), only delete existing label with government engineering permission.
c. Use HRI (Human Readable) and Machine Readable Matrix. (USAF not equiped to read barcode).
d. IUID Matrix needs to be highly visible, in a location easily accessible.
e. IUID marking must be permanent.
f. MIL-STD-130, ISO 15434, ISO 15415, and ISO 15418, (Part Marking as per MIL-STD-130 in lieu of FPS-3008)
i. IUID marking specifications.
1. Minimum 1/8 inch lettering on Human readable to include:
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
2. Minimum 1/4 inch square on Machine Readable 2D Matrix -construct 2 - to include
a. Cage (17V)
b. P/N (1P)
c. Serial Number (IS)
File details come from the government source that posted it. Updated .