EDR.pdf
PDF 159 KB Posted
- Attached to
- F-16 Linear Actuatin Cap, NSN 1650010533669
- Solicitation number
- SPRHA4-26-Q-0949
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (HILL AFB Form 462) prepared by the U.S. Air Force for the manufacture of an End Cap Assembly for the F-16 aircraft. The part number is 1211179-108 with National Stock Number 1650-01-053-3669WF. The document was prepared by Bill Garcia at Hill Air Force Base (416 SCMS/GUEAA) on 27 February 2024.
The document establishes mandatory requirements for manufacturers, including: military specifications and standards will not be provided in the bid set; all sources and materials listed on standards, specifications, and drawings are the only approved sources, with any substitutions requiring prior written approval from OO-ALC Cognizant Engineering Activity (416 SCMS); deviations from control drawing specifications are strictly prohibited without prior approval from OO-ALC Engineering (AFLCMC/416 SCMS); and IUID (Item Unique Identification) marking must be applied to specified surfaces per Air Force drawing 200733803-31. The document includes a technical illustration identifying the exact surface location where IUID marking is required on the end cap assembly component.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOW.pdf | ||
| SPRHA426Q0949.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
END CAP ASSEMBLY (F‐16)
2. PART NUMBER:
1211179‐108
3. NATIONAL STOCK NUMBER:
1650‐01‐053‐3669WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
27 FEB 2024
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC. WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED
DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY OO‐ALC COGNIZANT ENGINEERING
ACTIVITY (416 SCMS).
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY OO‐ALC ENGINEERING (AFLCMC/416 SCMS).
7. MARK IUID PER THE FOLLOWING:
File details come from the government source that posted it. Updated .