EDR.pdf

PDF 154 KB Posted Jul 30, 2026

Attached to: F-16 Actuators
Solicitation number: SPRHA4-26-R-0897
Issued by: Defense Logistics Agency Aviation

About this file

Written by GovTribe AI · Jul 30, 2026

This is an Engineering Data Requirements document (Hill AFB Form 462) dated December 6, 2022, prepared by Bill Garcia of the 416 SCMS/GUEAA office, establishing manufacturing specifications for an Actuator, Canopy-Electromechanical, Rotary, Single Place for the F-16 aircraft (Part Number: 16VK056001-1, National Stock Number: 1680015050663WF).

The document establishes mandatory compliance requirements for contractors manufacturing this aircraft component. Key specifications include: source materials and component substitutions require prior approval from cognizant engineering; deviations from control drawing specifications are prohibited without engineering authorization; MIL-STD-130 must be used for identification marking in lieu of FPS-3008; and all soldering must comply with MIL-STD-2000 or J-STD-001 (if meeting or exceeding MIL-STD-2000 standards) for aircraft soldering applications. The document explicitly addresses lead-free solder requirements, referencing Air Force Airworthiness Advisory M-05-01, and mandates that contractors continue using standard leaded solders until a suitable lead-free replacement is identified, as lead-free alternatives have not demonstrated equivalent reliability and performance for weapon system applications affecting national security. Contractors must either identify any lead-free components used with separate part numbers or provide written certification of compliance if no lead-free components exist in the end-item. Additionally, unique identification (UID) marking must be applied per MIL-STD-130 following AF Drawing 200733803-05 or equivalent, with location specified in drawing 16VK056001, Zone B5 where acceptable name plate locations are noted.

View the file

Other files

File	Type	Posted
EDL.pdf	PDF	Jul 30, 2026
SPRHA426R0897.pdf	PDF	Jul 30, 2026
PackagingSOW.pdf	PDF	Jul 30, 2026
MQR.pdf	PDF	Jul 30, 2026

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

REV: ENGINEERING DATA REQUIREMENTS

(ATTACHMENT “A”)

NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.

THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:

ACTUATOR, CANOPY-ELECTROMECHANICAL, ROTARY, SINGLE PLACE (F-16)

PART NUMBER:

16VK056001-1

NATIONAL STOCK NUMBER:

1680015050663WF

PREPARED BY:

BILL GARCIA

OFFICE SYMBOL:

416 SCMS/GUEAA

DATE:

DEC. 6, 2022

HILL AFB FORM 462 Page 1 of 2

1A. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY COGNIZANT ENGINEERING

ACTIVITY.

1B. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR

APPROVAL BY ENGINEERING.

1C. USE MIL-STD-130 IN LIEU OF FPS-3008.

1D. THIS IS AN AIRCRAFT PART. USE THE APPROPRIATE PORTION OF MIL-STD-2000 THAT APPLIES TO AIRCRAFT SOLDERING FOR ALL SOLDERING REQUIREMENTS. *NOTE: J-STD-001 MAY BE USED IN LIEU OF MIL-STD-2000, IF

SPECIFICATION MEETS OR EXCEEDS MIL-STD-2000.

2D. EFFECTIVE 9 MAY 2005 THE DEPARTMENT OF THE AIR FORCE ISSUED AN AIR WORTHINESS ADVISORY (M-05-01) REGARDING THE USE OF LEAD-FREE SOLDER IN ELECTRICAL AND ELECTRONIC MILITARY PRODUCTS. TO DATE, NO LEAD-FREE SOLDER FORMULATION HAS MATCHED THE RELIABILITY AND PERFORMANCE QUALITIES OF THE STANDARD LEADED SOLDERS. THEREFORE, UNTIL SUCH TIME AS A SUITABLE, RELIABLE LEAD-FREE SOLDER REPLACEMENT IS IDENTIFIED, ALL ELECTRONIC EQUIPMENT SUPPLIERS SHALL CONTINUE TO PROVIDE THE DEPARTMENT OF THE AIR FORCE WITH ITEMS WHICH MEET ALL PERFORMANCE, COMPATIBILITY, AND RELIABILITY STANDARDS PREVIOUSLY ESTABLISHED WITH LEADED SOLDERS. FAILURE TO DO SO, COULD ADVERSELY IMPACT THE

PERFORMANCE AND RELIABILITY OF WEAPON SYSTEMS AFFECTING NATIONAL SECURITY.

1. COMMERCIAL OFF-THE-SHELF (COTS) OR ANY OTHER ELECTRICAL COMPONENTS THAT CONTAIN LEAD-FREE

SOLDER OR LEAD-FREE PLATED COMPONENTS ARE USED IN THE END-ITEM.

2. ANY LEAD-FREE COMPONENT OR PART USED TO MANUFACTURE THE END ITEM THAT IS NOT IDENTIFIED WITH

A SEPARATE PART NUMBER OR DESIGNATION.

3D. IF NO LEAD-FREE, LEAD-FREE PLATED COTS OR ANY OTHER LEAD-FREE ELECTRICAL OR

ELECTRONICS COMPONENTS EXIST IN THE MANUFACTURED END-ITEM, THE CONTRACTOR

SHALL PROVIDE WRITTEN CERTIFICATION OF COMPLIANCE AS A DELIVERABLE WITH THE

CONTRACT.

1. USE INDUSTRY STANDARD IPC-1066, "MARKING, SYMBOLS AND LABELS FOR

IDENTIFICATION OF LEAD-FREE AND OTHER REPORTABLE MATERIALS IN LEAD-FREE ASSEMBLIES, COMPONENTS AND DEVICES."

2. INCLUDE THE PROGRAM ENGINEER'S EVALUATION OF THE PURCHASING/REPAIR ITEM FOR ANY "LEAD-FREE" MILITARY PART(S) IN REFERENCE TO ITS' RELIABILITY, PERFORMANCE AND COMPATIBILITY FOR THE SYSTEM.