EDR.pdf
PDF 108 KB Posted
- Attached to
- F-16 RUDDER, AIRCRAFT
- Solicitation number
- SPRHA4-26-Q-0674
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (Hill AFB Form 462) for the manufacture of a Rudder Assembly for the F-16 aircraft. The part number is 16T7302-805 with National Stock Number 1560-01-077-1314WF. The document was prepared by Kacey Abbott from the 416 SCMS/GUEAA office at Hill Air Force Base on November 2, 2023.
The document establishes manufacturing requirements and substitutions for the rudder assembly production. Key specifications include: part marking shall conform to MIL-STD-130 instead of FPS-3008; material shall be per SAE AMS-QQ-A-250/4 in lieu of QQ-A-250/4; IGES loft data listed on the Engineering Data List (EDL) shall be used instead of drawing 16PR006; drawing 16PR100 is not required for manufacture and will not be provided; and any deviations from control drawing specifications require prior written approval from the cognizant engineering activity. The document specifies that only source materials and vendors listed on standards, specifications, and drawings are authorized, with any substitutions requiring prior approval from the engineering activity.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MQR.pdf | ||
| CDRL_FATR.pdf | ||
| SOW.pdf | ||
| SPRHA426Q0674.pdf | ||
| SPI.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RUDDER ASSY. (F-16)
2. PART NUMBER:
16T7302-805
3. NATIONAL STOCK NUMBER:
1560-01-077-1314WF
PREPARED BY:
KACEY ABBOTT
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
NOV. 2, 2023
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED
DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY COGNIZANT ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL
BY ENGINEERING.
7. PART MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.
8. 16PR100 IS NOT REQUIRED FOR MANUFACTURE AND WILL NOT BE PROVIDED.
9. 16PR006 IS NOT FURNISHED. USE IGES LOFT DATA LISTED ON THE EDL.
10. USE MATERIAL PER SAE AMS-QQ-A-250/4 IN LIEU OF QQ-A-250/4.
File details come from the government source that posted it. Updated .