EDR.pdf
PDF 12 KB Posted
- Attached to
- F-16 Gyroscope
- Solicitation number
- SPRHA4-26-R-0469
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document is an Engineering Data Requirements form (HILL AFB FORM 462, Attachment "A") prepared by the U.S. Air Force for the manufacture of a Rate Gyro Assembly-Flight Control component for the F-16 aircraft. The part number is 16C0705-3, with National Stock Number 6615-01-042-7834WF. The form was prepared by Lane Wilson from the 416 SCMS/GUEAA office on 24 August 2017.
The document establishes mandatory engineering and manufacturing requirements for contractors. Key stipulations include: military specifications and standards will not be provided in the bid set; only sources and materials listed on standards, specifications, and drawings are authorized for use, with prior approval by the cognizant engineering activity required for any substitutions; deviations from specifications identified in control drawings are prohibited without prior written approval from the cognizant engineering activity; and product marking shall comply with MIL-STD-130 in lieu of FPS-3008. This form serves as binding technical guidance for any contractor bidding on or awarded this contract.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| CPP.pdf | ||
| FATR.pdf | ||
| Pkg_SOW.pdf | ||
| SPRHA426R0469.pdf | ||
| MQR.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RATE GYRO ASSEMBLY-FLIGHT CONTROL. F-16
2. PART NUMBER:
16C0705-3
3. NATIONAL STOCK NUMBER:
6615-01-042-7834WF
PREPARED BY:
LANE WILSON
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
24 AUGUST 2017
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
7. MARKING PER MIL-STD-130 IN LIEU OF FPS-3008.
File details come from the government source that posted it. Updated .