EDR.pdf

This is an Engineering Data Requirements document (Attachment "A") prepared by Hill Air Force Base for the manufacture of a Motor, Direct Current AN/MST-T1 (V), Part Number 41479-1, with National Stock Number 6105013150540FD. The document outlines manufacturing instructions and specifications that contractors must follow without deviation unless prior approval is obtained from the cognizant engineering activity.

The document specifies critical manufacturing and identification requirements, including that military specifications and standards referenced will not be furnished in the bid set. All sources and materials listed on standards, specifications, and drawings are the only authorized sources; substitutions require prior approval by the cognizant engineering activity. Deviations from specifications identified in control drawings are prohibited without prior engineering approval. Unique identification (UID) labeling must be applied per MIL-STD-130 in lieu of FPS-3008, with minimum 1/8-inch human-readable text including CAGE (17V), part number (1P), and serial number (1S), and minimum 1/4-inch square machine-readable 2D matrix barcode (Construct 2) containing the same data. Any existing labels being replaced must retain all existing label data using the same label material specified in the drawing. The labeling must comply with MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418 standards. The document was prepared by Man Dinh from the 415 SCMS/GUMA office on February 19, 2026.