EDR.pdf
PDF 154 KB Posted
- Attached to
- F-16 Actuator
- Solicitation number
- SPRHA4-26-Q-0442
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document is an Engineering Data Requirements attachment (HILL AFB FORM 462) issued by the U.S. Air Force on December 6, 2022, for the manufacture of an Actuator, Canopy-Electromechanical, Rotary, Single Place (F-16), Part Number 16VK056001-1, National Stock Number 1680015050663WF. The requirements were prepared by Bill Garcia of the 416 SCMS/GUEAA office at Hill Air Force Base.
The document establishes mandatory manufacturing and engineering specifications for the F-16 canopy actuator. Key requirements include: (1) use of only sources and materials listed on standards, specifications, and drawings, with prior engineering approval required for any substitutions; (2) adherence to MIL-STD-130 for marking in lieu of FPS-3008; (3) compliance with MIL-STD-2000 for aircraft soldering or J-STD-001 if it meets or exceeds MIL-STD-2000 standards; (4) continued use of leaded solders rather than lead-free alternatives due to reliability and performance concerns for national security; (5) written certification of compliance if no lead-free components exist in the end-item; (6) use of industry standard IPC-1066 for marking lead-free materials; and (7) application of Unique Identification (UID) per MIL-STD-130 in accordance with Air Force Drawing 200733803-05, with UID marking located in Zone B5 of Drawing 16VK056001 at acceptable name plate locations. The contractor must obtain prior engineering approval for any deviations from control drawings.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA426Q0442_______0001.pdf | ||
| SPRHA426Q0442.pdf | ||
| SPRHA426Q0442.pdf | ||
| MQR.pdf | ||
| PKG_SOW.pdf | ||
| Unmarked Eng Data 2022.pdf | ||
| EDL.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ACTUATOR, CANOPY-ELECTROMECHANICAL, ROTARY, SINGLE PLACE (F-16)
PART NUMBER:
16VK056001-1
NATIONAL STOCK NUMBER:
1680015050663WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
DEC. 6, 2022
HILL AFB FORM 462 Page 1 of 2
1A. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY COGNIZANT ENGINEERING
ACTIVITY.
1B. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
1C. USE MIL-STD-130 IN LIEU OF FPS-3008.
1D. THIS IS AN AIRCRAFT PART. USE THE APPROPRIATE PORTION OF MIL-STD-2000 THAT APPLIES TO AIRCRAFT SOLDERING FOR ALL SOLDERING REQUIREMENTS. *NOTE: J-STD-001 MAY BE USED IN LIEU OF MIL-STD-2000, IF
SPECIFICATION MEETS OR EXCEEDS MIL-STD-2000.
2D. EFFECTIVE 9 MAY 2005 THE DEPARTMENT OF THE AIR FORCE ISSUED AN AIR WORTHINESS ADVISORY (M-05-01) REGARDING THE USE OF LEAD-FREE SOLDER IN ELECTRICAL AND ELECTRONIC MILITARY PRODUCTS. TO DATE, NO LEAD-FREE SOLDER FORMULATION HAS MATCHED THE RELIABILITY AND PERFORMANCE QUALITIES OF THE STANDARD LEADED SOLDERS. THEREFORE, UNTIL SUCH TIME AS A SUITABLE, RELIABLE LEAD-FREE SOLDER REPLACEMENT IS IDENTIFIED, ALL ELECTRONIC EQUIPMENT SUPPLIERS SHALL CONTINUE TO PROVIDE THE DEPARTMENT OF THE AIR FORCE WITH ITEMS WHICH MEET ALL PERFORMANCE, COMPATIBILITY, AND RELIABILITY STANDARDS PREVIOUSLY ESTABLISHED WITH LEADED SOLDERS. FAILURE TO DO SO, COULD ADVERSELY IMPACT THE
PERFORMANCE AND RELIABILITY OF WEAPON SYSTEMS AFFECTING NATIONAL SECURITY.
1. COMMERCIAL OFF-THE-SHELF (COTS) OR ANY OTHER ELECTRICAL COMPONENTS THAT CONTAIN LEAD-FREE
SOLDER OR LEAD-FREE PLATED COMPONENTS ARE USED IN THE END-ITEM.
2. ANY LEAD-FREE COMPONENT OR PART USED TO MANUFACTURE THE END ITEM THAT IS NOT IDENTIFIED WITH
A SEPARATE PART NUMBER OR DESIGNATION.
3D. IF NO LEAD-FREE, LEAD-FREE PLATED COTS OR ANY OTHER LEAD-FREE ELECTRICAL OR
ELECTRONICS COMPONENTS EXIST IN THE MANUFACTURED END-ITEM, THE CONTRACTOR
SHALL PROVIDE WRITTEN CERTIFICATION OF COMPLIANCE AS A DELIVERABLE WITH THE
CONTRACT.
1. USE INDUSTRY STANDARD IPC-1066, "MARKING, SYMBOLS AND LABELS FOR
IDENTIFICATION OF LEAD-FREE AND OTHER REPORTABLE MATERIALS IN LEAD-FREE ASSEMBLIES, COMPONENTS AND DEVICES."
2. INCLUDE THE PROGRAM ENGINEER'S EVALUATION OF THE PURCHASING/REPAIR ITEM FOR ANY "LEAD-FREE" MILITARY PART(S) IN REFERENCE TO ITS' RELIABILITY, PERFORMANCE AND COMPATIBILITY FOR THE SYSTEM.
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ACTUATOR, CANOPY-ELECTROMECHANICAL, ROTARY, SINGLE PLACE (F-16)
PART NUMBER:
16VK056001-1
NATIONAL STOCK NUMBER:
1680015050663WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
DEC. 6, 2022
HILL AFB FORM 462 Page 2 of 2
4 A UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. APPLY PER AF DRAWING 200733803-05 OR EQUIVALENT. LOCATION OF UID MARKING SHALL BE PER DRAWING
16VK056001, ZONE B5 WHERE THE NOTE “ACCEPTABLE NAME PLATE LOCATIONS” APPLIES.
File details come from the government source that posted it. Updated .