EDR.pdf
PDF 82 KB Posted
- Attached to
- UMTE COUPLER, ROTARY, RADI Federal contract opportunity
- Solicitation number
- SPRHA5-26-Q-0451
- Issued by
- Defense Logistics Agency Aviation
About this file
This document is a Hill AFB Form 462 Engineering Instructions sheet for the manufacture of part number SC5985-0230-1 (National Stock Number 5985-01-507-4229FD). Prepared by Andrew Webb from the 415 SCMS office on January 13, 2026, the instructions establish manufacturing requirements and compliance procedures for this assembly.
The document specifies that contractors must achieve full compliance with all applicable drawings, specifications, and standards prior to contract award, with written certification required. Material sources and suppliers listed in specifications and drawings are mandatory; any substitutions require prior approval from the cognizant engineering activity. Deviations from control drawing specifications are prohibited without prior authorization. The system engineer retains full rights to review and accept or reject discrepant items before shipment, with all deviations subject to engineering review and disposition. For identification purposes, contractors must apply Unique Identification (UID) markings per MIL-STD-130, including minimum 1/8-inch human-readable text with CAGE code (17V), part number (1P), and serial number (1S), and minimum 1/4-inch square machine-readable 2D matrix barcode (Construct 2) containing the same data. If replacing existing labels, all data from the original label must be retained using the same label material specified in the drawing. Compliance with MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418 standards is required.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| EDL.pdf | ||
| MQR.pdf | ||
| SOW.pdf | ||
| CDRL_CPP.pdf | ||
| SPRHA526Q0451.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV:
ENGINEERING INSTRUCTIONS
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
2. PART NUMBER:
SC5985-0230-1
3. NATIONAL STOCK NUMBER:
5985-01-507-4229FD
PREPARED BY:
Andrew Webb
OFFICE SYMBOL:
415 SCMS
DATE:
01/13/2026s
HILL AFB FORM 462
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.i
5. THE SOURCES/MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR APPROVAL BY
THE COGNIZANT ENGINEERING ACTIVITY.
7. SYSTEM ENGINEER RETAINS ALL RIGHTS TO REVIEW AND ACCEPT DISCREPANT ITEM PRIOR TO SHIPMENT. ANY DEVIATION FROM THE ENGINEERING DRAWING SHALL BE SUBMITTED FOR ENGINEERING REVIEW AND DISPOSITION.
8. PRIOR TO CONTRACT AWARD, THE CONTRACTOR SHALL CERTIFY TO THE GOVERNMENT IN WRITING FULL COMPLIANCE WITH DRAWINGS, SPECIFICATIONS AND STANDARDS CALLED OUT AND REQUIRED FOR THE MANUFACTURE OF THIS ASSEMBLY. THE CONTRACTOR IS RESPONSIBLE TO COMPLETELY SEARCH THESE DRAWINGS, SPECIFICATIONS AND STANDARDS AND FULLY
UNDERSTAND THE REQUIREMENTS NECESSARY TO MANUFACTURE THE ITEM.
9. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130:
a. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
i. CAGE (17V)
ii. P/N (1P)
iii. SERIAL NUMBER (1S)
b. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
i. CAGE (17V)
ii. P/N (1P)
iii. SERIAL NUMBER (1S)
c. LABEL SHALL CONTAI/N ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
d. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
e. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
REV:
ENGINEERING INSTRUCTIONS
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
2. PART NUMBER:
SC5985-0230-1
3. NATIONAL STOCK NUMBER:
5985-01-507-4229FD
PREPARED BY:
Andrew Webb
OFFICE SYMBOL:
415 SCMS
DATE:
01/13/2026s
HILL AFB FORM 462
i
File details come from the government source that posted it. Updated .