EDR.pdf
PDF 154 KB Posted
- Attached to
- Actuators
- Solicitation number
- SPRHA4-26-R-00373
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (HILL AFB Form 462) for the manufacture of an Actuator, Canopy-Electromechanical, Rotary, Single Place for the F-16 aircraft. The document specifies manufacturing and quality requirements for Part Number 16VK056001-1 (National Stock Number 1680015050663WF) and was prepared by Bill Garcia at Hill Air Force Base on December 6, 2022.
The document establishes mandatory manufacturing standards and material specifications for this aircraft component. Key requirements include: source materials and specifications listed on control drawings are the only authorized sources, with substitutions requiring prior approval from cognizant engineering; soldering must comply with MIL-STD-2000 (or J-STD-001 if exceeding MIL-STD-2000 standards) as this is an aircraft part; use of leaded solder is mandated per Air Force Airworthiness Advisory M-05-01, with lead-free components requiring written certification of compliance and evaluation by the program engineer regarding reliability, performance, and compatibility; marking of any lead-free materials must follow industry standard IPC-1066; and Unique Identification (UID) markings must be applied per MIL-STD-130 in lieu of FPS-3008, positioned per AF Drawing 200733803-05 or equivalent in drawing zone B5. The document notes that military specifications and standards will not be provided in the bid set, requiring contractors to obtain these independently.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| EDL.pdf | ||
| SQS.pdf | ||
| SPRHA426R0373.pdf | ||
| SOW.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ACTUATOR, CANOPY-ELECTROMECHANICAL, ROTARY, SINGLE PLACE (F-16)
PART NUMBER:
16VK056001-1
NATIONAL STOCK NUMBER:
1680015050663WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
DEC. 6, 2022
HILL AFB FORM 462 Page 1 of 2
1A. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY COGNIZANT ENGINEERING
ACTIVITY.
1B. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
1C. USE MIL-STD-130 IN LIEU OF FPS-3008.
1D. THIS IS AN AIRCRAFT PART. USE THE APPROPRIATE PORTION OF MIL-STD-2000 THAT APPLIES TO AIRCRAFT SOLDERING FOR ALL SOLDERING REQUIREMENTS. *NOTE: J-STD-001 MAY BE USED IN LIEU OF MIL-STD-2000, IF
SPECIFICATION MEETS OR EXCEEDS MIL-STD-2000.
2D. EFFECTIVE 9 MAY 2005 THE DEPARTMENT OF THE AIR FORCE ISSUED AN AIR WORTHINESS ADVISORY (M-05-01) REGARDING THE USE OF LEAD-FREE SOLDER IN ELECTRICAL AND ELECTRONIC MILITARY PRODUCTS. TO DATE, NO LEAD-FREE SOLDER FORMULATION HAS MATCHED THE RELIABILITY AND PERFORMANCE QUALITIES OF THE STANDARD LEADED SOLDERS. THEREFORE, UNTIL SUCH TIME AS A SUITABLE, RELIABLE LEAD-FREE SOLDER REPLACEMENT IS IDENTIFIED, ALL ELECTRONIC EQUIPMENT SUPPLIERS SHALL CONTINUE TO PROVIDE THE DEPARTMENT OF THE AIR FORCE WITH ITEMS WHICH MEET ALL PERFORMANCE, COMPATIBILITY, AND RELIABILITY STANDARDS PREVIOUSLY ESTABLISHED WITH LEADED SOLDERS. FAILURE TO DO SO, COULD ADVERSELY IMPACT THE
PERFORMANCE AND RELIABILITY OF WEAPON SYSTEMS AFFECTING NATIONAL SECURITY.
1. COMMERCIAL OFF-THE-SHELF (COTS) OR ANY OTHER ELECTRICAL COMPONENTS THAT CONTAIN LEAD-FREE
SOLDER OR LEAD-FREE PLATED COMPONENTS ARE USED IN THE END-ITEM.
2. ANY LEAD-FREE COMPONENT OR PART USED TO MANUFACTURE THE END ITEM THAT IS NOT IDENTIFIED WITH
A SEPARATE PART NUMBER OR DESIGNATION.
3D. IF NO LEAD-FREE, LEAD-FREE PLATED COTS OR ANY OTHER LEAD-FREE ELECTRICAL OR
ELECTRONICS COMPONENTS EXIST IN THE MANUFACTURED END-ITEM, THE CONTRACTOR
SHALL PROVIDE WRITTEN CERTIFICATION OF COMPLIANCE AS A DELIVERABLE WITH THE
CONTRACT.
1. USE INDUSTRY STANDARD IPC-1066, "MARKING, SYMBOLS AND LABELS FOR
IDENTIFICATION OF LEAD-FREE AND OTHER REPORTABLE MATERIALS IN LEAD-FREE ASSEMBLIES, COMPONENTS AND DEVICES."
2. INCLUDE THE PROGRAM ENGINEER'S EVALUATION OF THE PURCHASING/REPAIR ITEM FOR ANY "LEAD-FREE" MILITARY PART(S) IN REFERENCE TO ITS' RELIABILITY, PERFORMANCE AND COMPATIBILITY FOR THE SYSTEM.
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ACTUATOR, CANOPY-ELECTROMECHANICAL, ROTARY, SINGLE PLACE (F-16)
PART NUMBER:
16VK056001-1
NATIONAL STOCK NUMBER:
1680015050663WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
DEC. 6, 2022
HILL AFB FORM 462 Page 2 of 2
4 A UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. APPLY PER AF DRAWING 200733803-05 OR EQUIVALENT. LOCATION OF UID MARKING SHALL BE PER DRAWING
16VK056001, ZONE B5 WHERE THE NOTE “ACCEPTABLE NAME PLATE LOCATIONS” APPLIES.
File details come from the government source that posted it. Updated .