EDR.pdf
PDF 74 KB Posted
- Attached to
- F-16 Cylinder Assembly
- Solicitation number
- SPRHA4-26-Q-0210
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (Hill AFB Form 462) prepared by the Department of the Air Force for the manufacture of an Actuator Assembly for Hydraulic Nose Gear Door. The part number is 16VH202-3, with National Stock Number 1650-01-417-8525WF. The document was prepared by Bill Garcia from the 416 SCMS/GUEAA office on February 22, 2021.
The document establishes manufacturing and engineering requirements for the actuator assembly, specifying that military specifications and standards will not be furnished in the bid set. Key requirements include: sources and materials listed on standards, specifications, and drawings are the only authorized sources and materials for those items; any deviations from specifications identified in control drawings require prior approval from 416 SCMS Engineering; part marking must comply with MIL-STD-130 in lieu of FPS-3008; and IUID marking must be completed per Drawing 1211179, Engineering Order 12C3284-H. The specifications and standards referenced in the document supersede any other data unless otherwise indicated.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SOW.pdf | ||
| SPRHA426Q0210.pdf | ||
| EDL.pdf | ||
| MQR.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ACTUATOR ASSY-HYD,NOSE GEAR DOOR
2. PART NUMBER:
16VH202-3
3. NATIONAL STOCK NUMBER:
1650-01-417-8525WF
PREPARED BY:
BILL GARCIA
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
2/22/2021
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY 416 SCMS ENGINEERING.
7. PART MARKING PER MIL-STD-130 IN LIEU OF FPS-3008
8. MARK IUID PER DRAWING 1211179, EO 12C3284-H.
File details come from the government source that posted it. Updated .