EDR.pdf
PDF 107 KB Posted
- Attached to
- 1630-01-678-3355(26-R-0266)
- Solicitation number
- SPRHA1-26-R-0266
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements document (Attachment "A") for manufacturing a Rigger Strut Assembly, Nose Ski for the C-130 aircraft. The document provides specific technical specifications and modifications for two related drawings: Drawing 201612170-10 (Rigger Strut Assembly, Nose Ski) and Drawing 201612191-01 (Identification Plate). Key technical changes include substituting an air valve (from MS28889-2 to M6164-2) and updating anodizing specifications from MIL-A-8625 to MIL-PRF-8625. The document also revises a servicing instruction, specifying that the component should be inflated with nitrogen or air conforming to A-A-59503 to 2220 +/-35 PSIG. The part is identified with National Stock Number 1630-01-678-3355 and was prepared by James Cushman from the 417 SCMS/GUEA office on 27 October 2025.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA1-26-R-0266-0003.pdf | ||
| SPRHA1-26-R-0266-0002.pdf | ||
| SPRHA1-26-R-0266-0001 CUI.pdf | ||
| PackagingSOW.pdf | ||
| EDL.pdf | ||
| SPRHA1-26-R-0266 CUI.pdf | ||
| MQR.pdf | ||
| CDRLFAT.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
RIGGER STRUT ASSEMBLY, NOSE SKI (C-130)
2. PART NUMBER:
201612170-10
3. NATIONAL STOCK NUMBER:
1630-01-678-3355
PREPARED BY:
JAMES CUSHMAN
OFFICE SYMBOL:
417 SCMS/GUEA
DATE:
27 OCTOBER 2025
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED. AECO 2025A6084-H (201612170) AND AECO 2025A6085-H (201612191) WILL BE PUBLISHED TO REVISE THE CHANGED DATA SPECIFIED BELOW FOR FUTURE
PROCUREMENT EFFORTS.
5. GENERAL REQUIREMENTS:
5.1 ESTABLISHED PER APPLICABLE DRAWINGS
6. DRAWING 201612170 (-10) RIGGER STRUT ASSEMBLY, NOSE SKI
6.1 IN LIEU OF VALVE, AIR P/N MS28889-2 SPECIFIED IN THE PARTS LIST AND NOTE 10. SUBNOTE A., USE AIR VALVE P/N
M6164-2 PER SPECIFICATION MIL-PRF-6164.
7. DRAWING 201612191 (-01) IDENTIFICATION PLATE, RIGGER STRUT ASSEMBLY, NLG SKI
7.1 NOTE 8: ANODIZE PER MIL-PRF-8625, TYPE II, CLASS 2 IN LIEU OF MIL-A-8625, TYPE II, CLASS 2.
7.2 ON THE -01 IDENTIFICATION PLATE FIGURE, SERVICING INSTRUCTION 2. SHALL BE REPLACED WITH THE
FOLLOWING TO REPLACE A CANCELLED SPECIFICATION:
2. INFLATE WITH NITROGEN OR AIR CONFORMING WITH A-A-59503 TO 2220 +/-35 PSIG.
File details come from the government source that posted it. Updated .