EDR.pdf
PDF 137 KB Posted
- Attached to
- MWD - DIVIDER, POWER, RADIO Federal contract opportunity
- Solicitation number
- SPRHA3-25-Q-0669
- Issued by
- Defense Logistics Agency Aviation
About this file
This Engineering Data Requirements (EDR) document provides manufacturing specifications for a Power Radio Divider (AN/FPS-132) with National Stock Number 5895013314875ZA and Part Number 953143. The document outlines critical technical requirements for unique identification (UID) labeling, specifically mandating that labels must include:
Labeling specifications require a minimum 1/8-inch human-readable label containing CAGE code (17V), Part Number (1P), and Serial Number (1S), and a minimum 1/4-inch square machine-readable 2D matrix with the same information. The document emphasizes that source materials must adhere to listed standards, and any deviations or material substitutions require prior engineering approval. Compliance standards include MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, and ISO 15418, with specific guidelines for maintaining existing label data and material requirements.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| CDRLCPP.pdf | ||
| EDL.pdf | ||
| CDRLFATP.pdf | ||
| MQR.pdf | ||
| SPRHA325Q0669.pdf | ||
| CDRLFATR.pdf | ||
| SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
DIVIDER, POWER, RADIO (AN/FPS-132)
2. PART NUMBER:
953143
3. NATIONAL STOCK NUMBER:
5895013314875ZA
PREPARED BY:
KENDRIC HORNSBY
OFFICE SYMBOL:
415 SCMS/GUMBC
DATE:
APR. 24, 2024
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE / MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .