EDR.pdf
PDF 97 KB Posted
- Attached to
- F-16 Actuator
- Solicitation number
- SPRHA4-25-Q-0233
- Issued by
-
Defense Logistics Agency Aviation
About this file
This is an Engineering Data Requirements (EDR) document specifying manufacturing requirements for an F-16 Canopy Actuator (Part Number: 16VK013002-4, NSN: 1680-01-142-8095WF) for the Defense Logistics Agency Aviation.
The document outlines key manufacturing specifications, noting that military specifications/standards will not be furnished in the bid set. It requires part marking to follow MIL-STD-130 instead of FPS-3008, prohibits deviations from control drawing specifications without prior approval from 416 SCMS/GUMAA Engineering, and specifies that 16PR100 is not required for manufacture. Any substitutions of sources/materials listed on specifications, standards, and drawings must receive prior approval from the cognizant engineering activity. The document was prepared on October 27, 2020, by the 416 SCMS/GUEAA office at Hill Air Force Base.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| MQR.pdf | ||
| SPI.pdf | ||
| EDL.pdf | ||
| Pkg_SOW.pdf | ||
| SPRHA425Q0233 CUI.pdf | ||
| Unmarked Eng Data.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ACTUATOR, CANOPY F-16
2. PART NUMBER:
16VK013002-4
3. NATIONAL STOCK NUMBER:
1680-01-142-8095WF
PREPARED BY:
DON WILLMOTH
OFFICE SYMBOL:
416 SCMS/GUEAA
DATE:
20201027
HILL AFB FORM 462 Page 1 of 1
4.0 THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
4.1 THE SOURCES/MATERIALS IF LISTED ON THE SPECIFICATION, STANDARDS AND DRAWINGS ARE THE ONLY SOURCES/MATERIALS FOR THOSE ITEMS. ANY SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
4.2 PART MARKING AS PER MIL-STD-130 IN LIEU OF FPS-3008.
5. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY 416 SCMS/GUMAA ENGINEERING.
6. 16PR100 IS NOT REQUIRED FOR MANUFACTURE AND WILL NOT BE FURNISHED.
File details come from the government source that posted it. Updated .