EDR.pdf
PDF 459 KB Posted
- Attached to
- JTE Cooler Federal contract opportunity
- Solicitation number
- SPRHA524Q0767
- Issued by
- Defense Logistics Agency Aviation
About this file
This document is an Engineering Data Requirements (EDR) attachment that provides manufacturing instructions and specifications for a Thermoelectric Cooler, 1500 BTU (AN/TSQ-T10), part number A2500-200002, with national stock number 4120015989070FD.
The EDR specifies that military specifications and standards will not be provided in the bid set. It outlines the required use of certain specifications and standards, including the application of Unique Identification (UID) markings per MIL-STD-130. The source materials listed in the standards and drawings are the only approved materials, and any deviations require prior engineering approval. The document also includes formatting and labeling requirements for the UID markings.
This EDR is associated with a federal contract opportunity for the JTE Cooler, solicitation number SPRHA524Q0767, which is only open to the approved source, EIC Solutions (CAGE 9W159). Parties interested in becoming an approved source must review the Manufacturing Qualification Requirements document.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| SPRHA524Q0767 CUI.pdf | ||
| MQR.pdf | ||
| EDL.pdf | ||
| CPP.pdf | ||
| Pkg_SOW.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
THERMOELECTRIC COOLER, 1500 BTU (AN/TSQ-T10)
2. PART NUMBER:
A2500-200002
3. NATIONAL STOCK NUMBER:
4120015989070FD
PREPARED BY:
WYATT SNARE
OFFICE SYMBOL:
415 SCMS/GUEA
DATE:
MAY. 2, 2024
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE / MATERIALS IF LISTED ON THE STANDARDS, SPECIFICATIONS AND DRAWINGS ARE THE ONLY SOURCE/MATERIALS FOR THOSE ITEMS. SUBSTITUTIONS SHALL HAVE PRIOR APPROVAL BY THE COGNIZANT
ENGINEERING ACTIVITY.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY ENGINEERING.
7. UNIQUE IDENTIFICATION (UID) SHALL BE APPLIED PER MIL-STD-130 IN LIEU OF FPS-3008:
A. MINIMUM 1/8TH INCH ON HUMAN READABLE TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
B. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX – CONSTRUCT 2 – TO INCLUDE:
1. CAGE (17V)
2. P/N (1P)
3. SERIAL NUMBER (1S)
C. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, IF EXISTING LABEL IS TO BE REPLACED.
D. SAME LABEL MATERIAL SHALL BE USED AS SPECIFIED IN DRAWING FOR EXISTING LABEL.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418.
File details come from the government source that posted it. Updated .