EDR.pdf
PDF 178 KB Posted
- Attached to
- F-16 Heads Up Display Monitor
- Solicitation number
- SPRHA424R0967
- Issued by
-
Defense Logistics Agency Aviation
About this file
This document provides engineering data requirements for the manufacture of an enclosure assembly for the F-16 aircraft. It identifies the part number as 46431110-30 and national stock number as 1270-01-514-2683WF. Specifications and standards to be used include SAE AMS-QQ-A-250/11 in lieu of QQ-A-250/11. It outlines Item Unique Identifier requirements and expectations for contractors to ensure compliance, including human and machine readable labeling with specific data elements no smaller than 1/8 and 1/4 inches respectively. Deviations from control drawings require prior approval from the contracting agency, the Ogden Air Logistics Complex Engineering department.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| SPRHA424R0967_______0001 CUI.pdf | ||
| SOW.pdf | ||
| EDL.pdf | ||
| MQR.pdf | ||
| SPI.pdf | ||
| FATR.pdf | ||
| SPRHA424R0967.pdf |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
REV: ENGINEERING DATA REQUIREMENTS
(ATTACHMENT “A”)
NOTE: MILITARY SPECIFICATIONS / STANDARDS WILL NOT BE FURNISHED IN THE BID SET.
1. THE FOLLOWING INSTRUCTIONS ARE FURNISHED FOR THE MANUFACTURE OF:
ENCLOSURE ASSEMBLY, F-16 IASHM
2. PART NUMBER:
46431110-30
3. NATIONAL STOCK NUMBER:
1270-01-514-2683WF
PREPARED BY:
JED FOY
OFFICE SYMBOL:
DATE:
7/17/2019
HILL AFB FORM 462 Page 1 of 1
4. THE FOLLOWING SPECIFICATIONS/STANDARDS, ETC., WILL BE USED IN LIEU OF THE DATA INDICATED. THE
SUPERSEDED DATA WILL NOT BE FURNISHED UNLESS SO INDICATED.
5. THE SOURCE/MATERIAL IF LISTED ON THE STANDARDS, SPECIFICATION AND DRAWINGS ARE THE ONLY
SOURCE/MATERIALS FOR THOSE ITEMS.
6. DEVIATIONS FROM SPECIFICATIONS IDENTIFIED IN CONTROL DRAWINGS ARE NOT AUTHORIZED WITHOUT PRIOR
APPROVAL BY OO-ALC ENGINEERING.
7. USE MATERIAL PER SAE AMS-QQ-A-250/11 IN LIEU OF QQ-A-250/11.
8. IUID (ITEM UNIQUE IDENTIFIER) REQUIREMENTS AND EXPECTATIONS WHICH THE CONTRACTOR MUST ENSURE ARE
COMPLIED WITH.
9. CONTRACTORS DRAWINGS SHALL BE CHANGED OR SUPPLEMENTED BY CONTRACTOR FOR IUID COMPLIANCE.
A. LABEL SHALL CONTAIN ALL DATA ON EXISTING LABEL, (IF EXISTING LABEL IS TO BE REPLACED), ONLY
DELETE EXISTING LABEL WITH GOVERNMENT ENGINEERING PERMISSION.
B. USE HRI (HUMAN READABLE) AND MACHINE READABLE MATRIX. (USAF NOT EQUIPED TO READ BARCODE).
C. IUID MATRIX NEEDS TO BE HIGHLY VISIBLE, IN A LOCATION EASILY ACCESSIBLE.
D. IUID MARKING MUST BE PERMANENT.
E. MIL-STD-130, ANSI/AIM BCII, ISO 15434, ISO 15415, AND ISO 15418
F. IUID MARKING SPECIFICATIONS.
1. MINIMUM 1/8 INCH LETTERING ON HUMAN READABLE TO INCLUDE:
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
2. MINIMUM 1/4 INCH SQUARE ON MACHINE READABLE 2D MATRIX -CONSTRUCT 2 - TO INCLUDE
A. CAGE (17V)
B. P/N (1P)
C. SERIAL NUMBER (IS)
File details come from the government source that posted it. Updated .