EDL_Rev6.pdf

ENGINEERING DATA LIST

DATE:

20 DEC 2023

REVISION: 6 *HISTORY*

CAGE:

88277

PAGE:

NSN:

5120012441248BA

DATA TECH:

Nitz, Richard C

END ITEM:

C-17 SUPPORT EQUIPMENT

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMACB/

MANUFACTURER NAME:

THE BOEING COMPANY

REFERENCE NUMBER:

17G130003-1

NOUN:

WRENCH,SPANNER

LINE/

SUB CAGE

ENG DRAWING NUM/ ACCOMP

DOC NUM REV

NR

SHEETS

FURN

CODE

DIST

CODE NOUN REMARKS

L 88277 17G130003 D S D WRENCH, SPANNER-AXLE

NUT, MLG

Nitz, Richard C 20 DEC 2023

-1

NAME: DATE:

L 88277 17G130003 NL D S D WRENCH, SPANNER-AXLE

NUT, MLG

Nitz, Richard C 20 DEC 2023

Notes List

NAME: DATE:

L 88277 17G130003 PL D S D WRENCH, SPANNER-AXLE

NUT, MLG

Nitz, Richard C 20 DEC 2023

Parts List

NAME: DATE:

L 88277 DPS4.704 AY S D MAGNETIC PARTICLE

INSPECTION

L 88277 DPS5.00 R S D STEEL HEAT TREATMENT -

GENERAL

L 88277 DPS9.07 AN S D SURFACE TREATMENT OF

CORROSION RESISTANT

STEELS

L 88277 DPS4.747 G S D NONDESTRUCTIVE TESTING

PROCEDURE APPROVAL

L 88277 DPS4.710 M S D MINIMUM FABRICATION

PRACTICES FOR METALS

L 88277 DPS4.806 G S D FABRICATING PRECIPITATION

HARDENING STAINLESS ST.

L 88277 DPS3.27-4 L S D ELECTROCHEMICAL ETCH-

MARKING OF METALS

L 88277 17P2C1232 D S D NUT,PLAIN,ROUND-AXLE,MLG Nitz, Richard C 20 DEC 2023

Reference

NAME: DATE:

L 88277 DPS1.001 J S D DOUGLAS PROCESS

STANDARDS (DPS) & SUPP.

DOCUMENTS

L 88277 DMS2100 G S D STEEL CORROSION RESISTANT

PH 13 8MO

L 98752 200415485 E S A GENERAL ENGINEERING

NOTES, ENGINEERING DATA

LIST

Nitz, Richard C 20 DEC 2023

Notes 1, 3, and 12 apply.

NAME: DATE:

STANDARD ENGINEERING TEXT

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 1 of 2EDL Version 6Generated by PRPS using Jasper Reports on 20 Dec 2023

ENGINEERING DATA LIST

DATE:

20 DEC 2023

REVISION: 6 *HISTORY*

CAGE:

88277

PAGE:

NSN:

5120012441248BA

DATA TECH:

Nitz, Richard C

END ITEM:

C-17 SUPPORT EQUIPMENT

ORGANIZATION/OFFICE SYMBOL:

429 SCMS GUMACB/

MANUFACTURER NAME:

THE BOEING COMPANY

REFERENCE NUMBER:

17G130003-1

NOUN:

WRENCH,SPANNER

Nitz, Richard C 20 DEC 2023

For engineering notes, see document number 200415485. Spares configuration: per blueprint. finish per blueprint.

NAME: DATE:

C - CLASSIFIED DOCUMENT.

S - FURNISHED WITH SOLICITATION.

M - STABLE BASE DRAWING REQUIRED; FURNISHED WITH

CONTRACT AWARD.

X - DATA SUPPLIED (NOT IN JEDMICS).

R - FURNISHED BY PCO UPON REQUEST.

P - PARTIAL DOCUMENT FURNISHED.

V - VENDOR DRAWING; (NOT PROVIDED).

G - GOV'T DOCUMENT.

O - OTHERS, CONTRACTOR MUST ACQUIRE.

A- DATA NOT AVAILABLE.

FURNISHED METHOD CODE LEGEND:

Page 2 of 2EDL Version 6Generated by PRPS using Jasper Reports on 20 Dec 2023

NOTICE TO ACCOMPANY THE DISSEMINATION OF

EXPORT- CONTROLLED TECHNICAL DATA

If you print or display an abstract df any unclassified report marked EXPORT CONTROL, the following notice applies.

1. Export of information conta~ned herein, which includes, in some circumstances, release io foreign nationals within the United States, without first obtaining approval or license &om the Department of State for items controlled by the International Traffic in I

Arms Regulations (ITAR), or the Department of Commerce for items conkolled by the I

Export Administration Regulat~ons (EAR), may constitute a violation of law.

2. Under 22 U.S.C. 2778 the penalty for unlawful export of rtems or information I controlled under the ITAR is up to 2 years imprisonment, or a fine of $100,000, or both.

Under 50 U.S.C., Appendix 2410, tl~e penalty for unlawful export of items or informa-tion controlled under the EAR is a fine of up to $1,000,000, or five times the value of the exports, wl~~cl~ever is greater; or for an individual, imprisonment of up to 10 years, ;

or a fine of up to $250,000, or both. I

3. In accordance with your certification that establishes you as a "qualified U.S.

contractor," unauthorized dissemination of this information is prohibited and may result I

:,:I in disqualification as a qualified U.S. contractor, and may be considered in determining your eligibility for future conbcts with the Department of Defense.

4. The U.S. Government assumes no liability for direct patent infringement, or con-tributory patent inliingernent or misuse of technical data. ..

5. The U.S. Government does not warrant the adequacy, accuracy, currency, or completeness of the technical data.

6. The U.S. Govern~nent assumes no liability for loss, damaEe;or injury resulting from manufacture or use for any purpose of any product, article, system, or material in-volving reliance upon any or all technical d a ~ furnished in response to the request for technical data.

7. If the technical data fumjslled by the Government will be used for commercial lnanufac tu~g or other profit potential, a hcense for such use may be necessary. Any payments made in support of the request for data do not include or involve any license rights.

8. A copy of this notice shall be provided with any partial or complete reproduction of these data that are provided to qualified U.S. contractors.

10 U.S.C. 140c @OD Directive 5230.25 (Encl5)