ECMP-566 Allen Bradley SOW (1).docx

ECMP-566 ALLEN BRADLEY

STATEMENT OF WORK

The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) is the Department of Defense (DoD) Energetics Center and serves as the DoD Explosive Ordnance Disposal Technology Program lead.

NSWC IHD provides research, development, engineering, manufacturing, test, evaluation and in-service support of energetics and energetic materials (chemicals, propellants and explosives) for ordnance, warheads, propulsion systems, pyrotechnic devices, fuzzing, electronic devices, Cartridge Actuated Devices and Propellant Actuated Devices (CAD/PADs), Packaging, Handling, Storage, and Transportation (PHS&T), gun systems and special weapons for Navy, Joint Forces, and the Nation.

The Naval Surface Warfare Center, Indian Head Division (NSWC IHD) Energetics Manufacturing Department has a requirement for industrial control system (ICS) equipment for upgrading the Temperature control system for the Slurry mixer in Building 727.

1.2 Scope of Work

The contractor shall be responsible for the design, fabrication, testing, and delivery of commercial PLC components, as well as associated accessories.

2.0 Applicable Documents

2.1 Conflicting Document Requirements

If there are any conflicts between specifications, drawings, or requirements listed herein, the contractor shall notify the Contracting Officer (KO) and the Technical Point of Contact (TPOC), in writing for interpretation, clarification, and resolution.

3.0 Requirements

The following Commercial off the Shelf (COTS) items manufactured by Allen-Bradley are required:

1. Communication Adapter, 2 Ethernet/IP Ports 1734-AENTR Item#2029 Qty 2 EA

2. Expansion Power Supply, 24VDC Input, 400mA, Horizontal Mounting 1734-EP24DC Item#76672 Qty 3EA

3. I/O Module, Digital DC Input, 4 Channel, DIN Rail,24VDC, Diagnostic 1734-IB4D Item#2046 Qty 7EA

4. I/O Module, Safety, 8 Point Input 1734-IB8S Item# 2046 Qty 1EA

5. I/O Module, Analog, 2 Inputs, Single Ended, 75mA 1734-IE2C Item# 69482 Qty 8EA

6. I/O Module, Digital DC Output, 4 Channel, Current Sourcing, 24VDC 1734-OB4E Item# 69440 Qty 3EA

7. I/O Module, Safety, Digital DC Output, 8 Channel, Current Sourcing 1734-OB8S Item# 2064 Qty 1EA

8. I/O Module, Analog, 2 Single Ended Outputs, 75mA, Pointbus Current 1734-OE2C Item# 69430 Qty 3EA

9. Terminal Base, 8 Screw, 10A, 24VDC, 120/240VAC, DIN Rail 1734-TB Item# 12118 Qty 28EA

10. Terminal Module, Voltage, 8 Channel, High Density 1734-VTM Item# 27752 Qty 1EA

11. Chassis, Mounting, 4 Slots, 20" x 20" x 8" 1756-A4 Item# 49893 Qty 1EA

12. Controller, GuardLogix, 5/2.5 MB, USB, 1GBEthernet, 175 Ether Net/IP, Safety 1756-L82ES Item# 1231808 Qty 1EA

13. Power Supply, Standard, 85 - 265VAC, 20A, 25W 1756-PA72 Item# 70303 Qty 1EA

14. Stratix 5200 Switch, 8 Copper 100/1000 Ports, 2Combo 100/1000 Ports, Full FW, DLR, PRP, NAT 1783-CMS10DN Item# 2161496 Qty 1EA

15. FactoryTalk View SE Station Bundle: Unlimited Displays Perpetual, 8x5 Support, ESD 9701M-VWSTNBDLT41 Item# 1961960 Qty 1EA

3.1 Specifications

3.1.1 General

The Offeror shall be an authorized Allen-Bradley/Rockwell Automation distributor, able to sell and provide Allen-Bradley/Rockwell Automation hardware and software.

3.2 Acceptance

The Government shall perform a visual inspection to ensure the deliverables are free of rust, damage, or any obvious defects. Inspection shall be completed within 15 working days of receipt of all deliverables. Contractor invoicing may occur as many as 30 working days after acceptance of deliverables.

The Government shall alert the Contractor to any nonconforming deliverables within one (1) working day of identifying the nonconformity. The Contractor shall respond to with their recommended disposition on the deliverables within one (1) working day.

3.3 Warranty

All electronics shall be protected by at least a 1-year manufacturer’s warranty. The warranty shall be void if any unapproved alterations have been made to the equipment.

3.4 Shipping

The vendor shall be responsible for shipping container design, and purchase of all packing and packaging materials. The packing shall prevent any damage which may occur during transit.

4.0 Deliverable

The Technical Point of Contact and Contracting Officer (KO) for this contract will approve all deliverables as specified herein.

4.1 Material Delivery

The Contractor shall notify the Contracting Officer 30 days in advance if the Contractor cannot meet the contract delivery schedule. The Contractor shall be responsible for coordinating and shipping all the equipment to the required destination.

Delivery address provided below:

Naval Surface Warfare Center Indian Head Division 4522 McMahon Road Bldg. 116, Suite 100 Indian Head, MD 20640