E60-0005 ESSM Cell Covers min mod updated SOW Spray Tight and Gasket_230502.pdf

Statement of Work For

MK 29 Guided Missile Launching System Launcher Cell Covers Testing

27 MARCH 2023

1 Scope:

This task is to complete the Spray Tight testing on the MIN MOD Cell Cover. This is to support validation of design and functionality for use with the ESSM BLK 2 Missile.

2 Applicable Documents:

Cell Cover Test Plan

2.1 Department of Defense Drawings (1):

Drawing 10706-A-001 AFT CELL COVER, BLK 2

2.2 Government Standards:

MIL-STD-31000A, TECHNICAL DATA PACKAGES

MIL-STD202G and MIL-STD-108E

2.3 Non-Government Standards and Other Publications:

3. Requirements:

3.1. General:

The contractor shall provide all resources necessary to accomplish the tasks and deliverables described in this Statement of Work (SOW).

3.2 The contractor shall provide test reports for the tests conducted and provide pass/fail data.

3.3 Shipping:

The contractor shall fabricate any necessary transportation fixture and/or crates when shipping test covers back to Naval Surface Warfare Center PHD 4363 Missile Way, Attn: Julian Niderost, Bldg. 1387, FL 2 Cube #2W-16A1, Port Hueneme, CA 93043,POC: Julian Niderost 805-228-6611, julian.b.niderost.civ@us.navy.mil. If shipping charges apply (FOB Destination), please add the estimated shipping cost for ground freight shipments to your quote.

3.4 Place of Performance:

Testing to be done at the vendor’s location and within the United States.

3.5 Meetings:

3.5.1 Post-award Kickoff Meeting:

Within 10 business days of contract award, the Government will conduct a post-award kickoff teleconference over the phone.

3.5.2 Intermittent Project Status Reviews:

At the sole discretion of the Government, intermittent project status reviews maybe conducted on an informal basis by telephone, teleconference, or on-site meeting.

3.6 Delivery, Deliverables and Furnished Items:

Schedules for deliverables specified below. All deliverables shall be prepared and submitted according to format, content, and schedule described in the SOW.

Schedule is based on when the contract is awarded. Once contract is awarded, cell cover and GFP will be shipped (1 week), test is conducted (2-4 days), test report generated (2 weeks), cell cover returned to PHD (2 weeks)

3.7 Sample Items:

We are requesting test reports and status updates of Cell Cover P/N: 10706-A-001.

Testing and test reports need to be completed by 15 September 2023.

3.8. Government Furnished Property:

10706-A-001 AFT CELL COVER, BLK 2

Part number Nomenclature

QTY

needed

3229814 Aft cell cover retainer 1 AN960C416L Flat Washer 6

AN4C7 Machine Bolt 6

3229815 Cell cover hinge 2

MS35308-

306 Cap Screw 2

AN960C416L Flat Washer 10

MS35650-

3254 Nut 2

MS35338-

139 Lock washer 2 AN4C42 Machine Bolt 2

MS24693-

C294 Machine Screw 4

3231880-1 Spacer 2

2896601 Cell cover clamp 1 AN4C15 Machine Bolt 1

AN960C416L Flat Washer 2

MS15795-

843 Flat Washer 1

MS35338-

143 Lock washer 1

MS51023-

114 Setscrew 1

2896604-1 Bracket clamp 1

MS35308-

310 Screw, cap 4 MS21044C4 Nut, self-locking 4 AN960C416L Washer, flat 8

3.9 Point of Delivery:

Test Reports delivered to:

For Test Reports:

Commander Naval Surface Warfare Center, Port Hueneme Division 4363 Missile Way, Bldg. 1387, FL 2 Cube #2W-16A1, POC: Julian Niderost, 805-228-6611, julian.b.niderost.civ@us.navy.mil Port Hueneme, CA 93043-4307 *Please reference contract number upon shipping*

3.10 Government Points of Contact (POCs):

3.10.1 Technical POC:

Julian Niderost, NSWC Division, Port Hueneme, Code S54, julian.niderost@navy.mil

3.10.2 Requirement Generator & Alternate Technical POC:

Phil Chowdhury, Code S53, firozul.chowdhury@navy.mil

3.10.3 Contracting POC:

Phil Chowdhury, NSWC PHD, Port Hueneme Code 0243, firozul.chowdhury@navy.mil mailto:julian.niderost@navy.mil