E.01W9127N22P0089 Columbia River Stern Mooring Buoy with Delivery Fully Executed.pdf

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS

1. REQUISITION NUMBER PAGE1 OF 12

OFFEROR TO COMPLETE BLOCKS 12, 17, 23, 24, AND 30

2 CONTRACT NO. 3. AW\RDIEFFECTI\IE OATE

4. ORDER NUMBER 5. SOUCITATION NUMBER 6. SOLICITATI ON ISSUE DATE

V\,9127N22R'.>089 15-Jul-2022

7. FOR SOLICITATION

INFORMATION CAU.:

9. ISSUED BY

USACE, PORll.AND DISTRICT

333 SW 1ST AVE

PORTI.AND OR 97204

TB..:

FAX:

1 1. DELIVERY FOR FOB DESTINA·

TION UNLESS BLOCK IS

MARKED

□ SEE SCHEDULE

1 5. DELIVER TO

LOGISTIC W\REHOUSE

CENW'-ODN SW

0010 NWST HELENS RD

PORTLAND OR 97210-3699

17a. CONTRACTOR/ CODE

J3VFE5

OFFEROR

a N AME

CODE I V\,9127N

12. DISCOUNT TERMS

f\ET30

CODE I W11UCX

I

FACILITY

I 3VFE5 CODE

MARINE FENDERS INTERNATIONAL, INC.

JERRY THERMOS

909 MAHAR AVE

WILMINGTON CA 90744-3828

TB..ffiOI\E flO. 310-834-7037

□ 17b. a-£0< F REMTTAI\CE IS C4FFffiENf Al'O A.Jr SL0-1 Aca::e;S IN OFFER

19. 20.

b. TB..EPHONE NUMBER (No Cdlect Calls) a OFFER DUE DATE/LOCAL TIME

10. 'THIS ACQUISITION IS □ UNRESTRICTED OR 0 SET ASIDE:�% FOR:

□ VIOMEN-OWlED SMALL BUSINESS (1/\0SB) [8jsMALL BUSINESS EUGIBlE UNDER THE VIOMEN-0'/INED

SMALL BUSIN ESS PROGRAM

□HUBZONE SMALL

OEDWOSB

NAICS:

BUSINESS 332313

□SERVICE-DISABLED □

8(A) SIZE STANDARD: VETERAN-OWNED

SMALL BUSINESS 750

13b. RATING

□ 13a. 'THIS CONTRACT IS A

RATED ORDER UNDER

DPAS (15 CFR 700) 14. '-ETHOD OF SOLICITATION

16. ADMINISTERED BY

SEE ITEM 9

18a. PAY'-'ENT WILL BE MADE BY

USA CE FNAta C8'1TER 5722 M"83RITY Cff\/E PvU.IIGTON TN 38054-5005

□RFQ □ IFB □RFP

CODE l

CODE

18b. SIBMT INVOCES TO Ai:x:R:SS Sl-0\M'J 1\1 BLOCK 18a. l.N..ESS BLOCK Ba.ON IS a-ECKE) □ SEEACXE-0..M

21. 22. 23. 24.

ITEM flO. Sa-m.LEOF Sl.FR..ES/ SERVICffi QUANTITY lNT LNTffilCE AI\/OLNT

SEE SCHEDULE

25. ACCOUNTING AND APPROPRIATION DATA 26. TOTAL AWARD AMOUNT (For Govt. Use Only)

See Schedule $164,000.00

□ 27a. SOLICITATION INCORPORATES BY REFERENCE FAR 52.212-1. 52.212-4. FAR 52.212-3. 52.212-5 ARE ATTACHED. ADDENDA D

ARE

D

ARE NOT ATTACHED

ADDENDA IB}RE DARE NOT ATTACHED 0 27b. CONTRACT/PURCHASE ORDER INCORPORATES BY REFERENCE FAR 52.212-4. FAR 52.212-5 IS ATTACHED.

0 28. CONTRACTOR IS REQUIRED TO SIGN 'THIS DOCU'-'ENT AND RETURN 1

COPIES TO ISSUING OFFICE. CONTRACTOR AGREES TO FURNISH AND

DELIVER ALL ITEMS SET FORl'H OR Ol'HERWISE IDENTIFIED ABOVE AND ON ANY

ADDITIONAL SHEETS SUBJECT TO THE TERMS AND C ONDITIONS S PECIFIED.

RB': 220708-1

□ 29. AWARD OF CONTRACT: REF.

OFFER DATED . YOUR OFFER ON SOLICITATION

(BLOCK 5), INCLUDING ANY ADDITIONS OR CHANGES WHICH ARE

SET FORTH HEREIN, IS A C CEPTED AS TO I TEMS: SEE SCHEDULE

30a. SIG, TI.R: OF OFFERORJCONTRACTOR 31a. UNITED STATES OF AMERICA (SIGNATURE OF CONTRACTING OFFICER)

-�l\r--.

30b. NA�.l.t,.o11Tl.EOF SIGf\ER

(TYPE OR PRINT)

:s ��(Lf 1(-t�' j

AUTI-ORIZED FOR LOCAL �

FREVIOUS EaT10N IS flOT USABLE

30c. D6. TE SIG['£) 31b. NI\ME OF COOTRACTING OFFICER

Ol -1Ulu- 2.o"?.i i-

TEL:

EMAIL:

(TYPE OR PRINT) 31c. DATE SIGNED

STAND6.RD FORM 1449 (REV. 2/2012}

R'escribed by GSA - FAR (48 CFR) 53.212

Brandon Lasich 503-808-4637 brandon.m.lasich@usace.army.mil 8/2/22

SOLICITATION/CONTRACT/ORDER FOR COMMERCIAL ITEMS I

(CONTINUED) I PAGE20F12

19. 20. 21. 22. 23. 24.

llcMl'O. SOtill..EOF SLm...ES/ SERVICES QUA.NTTTY lNT LNTFRCE AM)l.M

SEE SCHEDULE

32a. QUANTI1Y IN COLUM'I 21 HAS BEEN

□ RECEIVED □ INSPECTED u

CCEPTED, AND CONFORMS TO THE CONTRACT, EXCEPT AS NOTED:

32b. SIGNATURE OF AUTHORIZED GOVERNMENT 32c. DATE 32d. PRINTED NAIVE AND TITLE OF AUTHORIZED GOVERNMENT

REPRESENTATIVE REPRESENTATIVE

32e. MAILING ADDRESS OF AUTI-IORIZED GOVERNMENT REPRESENTATIVE 32f. TELEPHONE NUMBER OF AUTHORIZED GOVERNIVENT REPRESENTATIVE

32g. E-MAIL OF AUlHORIZED GOVERNIVENT REPRESENTATIVE

33. SHIP NUMBER 34. VOUCHER NUMBER 35. AMJUNT VERIFIED 36. PAYIVENT 37. CHECK NUMBER

CORRECT FOR □ COI\IPLETE □ PARTIAL □ FINAL

I PARTIAL I FINAL

38. SIR ACCOUNT NUMBER 39. SIR VOUCHER NUMBER 40. PAID BY

41a. I CERTIFY THIS ACCOUNT IS CORRECT AND PROPER FOR PAYIVENT 41b. SIGNATURE AND TITLE OF CERTIFYING OFFICER

Aun-oRIZB) FOR LOCAL REFROCA.CTlON ffiEVIOUS ECTOON IS l'OT USABLE

41c. DATE 42a. RECEIVED BY (Print)

42b. RECEIVED AT (LDCation)

42c. DATE REC'D (YYIMM/00)

42d. TOTAL CONTAINERS

STAl'IY\RD FORM 1449 (REV. 2/2012) BAO< A-escribecl by GSA - FAR (48 CFR) 53.212

Section SF 1449 - CONTINUATION SHEET

ITEM NO SUPPLIES/SERVICES QUANTITY

0001 l

Columbia River Buoy

FFP

UNIT

Job

Stern Mooring Buoy Assembly supply and delivery

UNlT PRJCE $164,000.00

NOTE: The requirements in DF ARS 252.2 l l-7003, ftem fdentification and Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

FOB: Destination

MFR PART NR: MB-205.3-675QRH-STD-CST

PSC CD: 2050

ACRN AA

CIN: W66QKZ212492900001

INSPECTION AND ACCEPTANCE TERMS

Supplies/services will be inspected/accepted at:

NET AMT

CLIN lNSPECT AT INSPECT BY ACCEPT AT 0001 Desti.nation

DELIVERY INFORMATION

CLlN DELIVERY DATE

0001 NIA

Government Destination

QUANTITY SHIP TO ADDRESS

NIA NIA

ACCOUNTING AND APPROPRIATION DA TA

W9 I 27N22P0089

AMOUNT

$164,000.00

$164,000.00

$164,000.00

ACCEPT BY

Government

DODAACI

CAGE

NIA

AA: 096 NA X 2022 3123 000 0000 CCS: 111 G2 2022 08243200363096352 2600 24D6 IC

AMOUNT: $164,000.00

ACRN CLfN/SLIN

AA 0001

CIN

W66QKZ2 l 249290000 I

AMOUNT

$164,000.00

CLAUSES IN CORPORATED BY REFEREN CE

52.203-12

52.204-7 52.204-9 52.204-13 52.204-16 52.204-17 52.204-18 52.204-19

52.204-21

52.204-25

52.204-26

52.212-1

52.212-3

52.212-4

52.222-22 52.223-2

52 .232-40

52.233-1 52.244-6

52.245-9 52.247-34 252.201-7000 252.204-70 12

252.211-7003 252.232-7003

252.232-70 I 0 252.232-7017

252.243-7001 252.244-7000

Limitation On Payments To Influence Certain Federal Transactions System for A ward Management Personal Identity Verification of Contractor Personnel System for Award Management Maintenance Commercial and Government Entity Code Reporting Ownership or Control of Offerer Commercial and Government Entity Code Maintenance Incorporation by Reference of Representations and Certifications.

Basic Safeguarding of Covered Contractor Information Systems Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment Covered Telecommunications Equipment or Services- Representation.

Instructions lo OITerors-Commercial Products and Commercial Services Offerer Representations and Certifications-Commercial Products and Commercial Services Contract Terms and Conditions-- Commercial Products and Commercial Services

JUN 2020

OCT2018

JAN 201 I

OCT2018

AUG 2020

AUG 2020

AUG 2020

DEC 2014

NOV 2021

NOV2021

OCT2020

NOV 2021

MAY 2022

NOV 2021

Previous Contracts And Compliance Reports FEB 1999 Affirmative Procurement of Biobased Products Under Service SEP 2013 and Construction Contracts Providing Accelerated Payments to Small Business Subcontractors Disputes Subcontracts for Commercial Products and Commercial Services Use And Charges F.O. B. Destination Contracting Officer's Representative Safeguarding Covered Defense Information and Cyber Incident Reporting Item Unique Identification and Valuation Electronic Submission of Payment Requests and Receiving Reports Levies on Contract Payments Accelerating Payments to Small Business Subcontractors- Prohibition on Fees and Consideration Pricing Of Contract Modifications Subcontracts for Commercial Items

NOV 2021

MAY2014

JAN 2022

APR 2012

NOV 1991

DEC 1991

DEC 2019

MAR2022

DEC 2018

DEC2006

APR 2020

DEC 1991

JAN 2021

W9127 N22 P0089

CLAUSES INCORPORATED BY FULL TEXT

W9 l 27N22P0089

52.212-5 CONTRACT TERMS AND CONDITIONS REQUIRED TO IMPLEMENT STATUTES OR

EXECUTIVE ORDERS--COMMERCIAL PRODUCTS AND COMMERCIAL SERVJCES (MAY 2022)

(a) The Contractor shall comply with the following Federal Acquisition Regulation (FAR) clauses, which are incorporated in this contract by reference, to implement provisions oflaw or Executive orders applicable to acquisitions of commercial products and commercial services:

( l ) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VTI, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(2) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersk:y Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(3) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(l )(A) of Pub. L. 115-232).

( 4) 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations (Nov 2015).

(5) 52.233-3, Protest After Award (AUG 1996) (31 U.S.C. 3553).

(6) 52.233-4, Applicable Law for Breach of Contract Claim (OCT 2004) (Public Laws I 08-77 and 108-78 ( 19 U.S.C. 3805 note)).

(b) The Contractor shall comply with the FAR clauses in this paragraph (b) that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions oflaw or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.] x (I) 52.203-6, Restrictions on Subcontractor Sales to the Government (JUN 2020), with Alternate I (NOV 2021) (41 U.S.C. 4704 and 10 U.S.C. 2402).

(2) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) ( 41 U.S.C. 3509).

(3) 52.203-15, Whistleblower Protections under the American Recovery and Reinvestment Act of2009 (JUN 2010) (Section 1553 of Pub. L. 111-5). (Applies to contracts funded by the American Recovery and Reinvestment Act of2009.)

x (4) 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards (JUN 2020) (Pub. L. 109-

282) (31 U.S.C. 6101 note).

(5) [Reserved]

(6) 52.204-14, Service Contract Reporting Requirements (Oct 2016) (Pub. L. 111-117, section 743 of Div. C).

(7) 52.204-15, Service Contract Reporting Requirements for Indefinite-Delivery Contracts (Oct 2016) (Pub.

L. 111-117, section 743 ofDiv. C).

x (8) 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment. (NOV 2021) (31 U.S.C. 6101 note).

(9) 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters (OCT 2018) (41 u.s.c. 2313).

__ (10) [Reserved]

__ (11) 52.219-3, Notice ofHUBZone Set-Aside or Sole-Source Award (SEP 2021) (15 U.S.C. 657a).

__ (12) 52.219-4, Notice of Price Evaluation Preference for HUBZone Small Business Concerns (SEP 2021) (if the offerer elects to waive the preference, it shall so indicate in its offer) (15 U.S.C. 657a).

__ ( 13) [Reserved] x (14){i) 52.219-6, Notice ofTotal Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-6.

__ {15)(i) 52.219-7, Notice of Partial Small Business Set-Aside (NOV 2020) (15 U.S.C. 644).

__ (ii) Alternate I (MAR 2020) of 52.219-7.

__ (16) 52.219-8, Utilization of Small Business Concerns (OCT 2018) (15 U.S.C. 637(d)(2) and (3)).

__ (17)(i) 52.219-9, Small Business Subcontracting Plan (NOV 2021) (15 U.S.C. 637(d)(4)).

__ (ii) Alternate l (NOV 2016) of 52.219-9.

__ (iii) Alternate 11 (NOV 2016) of 52.219-9.

__ (iv) Alternate Ill (JUN 2020) of 52.219-9.

__ (v) Alternate IV (SEP 2021) of 52.219-9.

__ (18) (i) 52.219-13, Notice of Set-Aside of Orders (MAR 2020) (15 U.S.C. 644(r)).

__ (ii) Alternate I (MAR 2020) of52.219-13.

x (19) 52.219-14, Limitations on Subcontracting (SEP 2021) (15 U.S.C. 657s).

__ (20) 52.219-16, Liquidated Damages-Subcontracting Plan (SEP 2021) (15 U.S.C. 637( d)(4)(F)(i)).

__ (21) 52.219-27, Notice of Service-Disabled Veteran-Owned Small Business Set-Aside (SEP 2021) (15 U.S.C.

657f).

x (22) (i) 52.219-28, Post-Award Small Business Program Rerepresentation (SEP 2021) (15 U.S.C. 632(a)(2)).

__ (ii) Alternate I (MAR 2020) of 52.219-28.

__ (23) 52.219-29, Notice of Set-Aside for, or Sole-Source Award to, Economically Disadvantaged Women Owned Small Business Concerns (SEP 2021) (15 U.S.C. 637(m)).

__ (24) 52.219-30, Notice of Set-Aside for, or Sole-Source Award to, Women-Owned Small Business Concerns Eligible Under the Women-Owned Small Business Program (SEP 2021) (15 U.S.C. 637(m)).

__ (25) 52.219-32, Orders Issued Directly Under Small Business Reserves (MAR 2020) (15 l.J.S.C. 644(r)).

W9127N22P0089 x (26) 52.219-33, Nonmanufacturer Rule (SEP 2021) (15 U.S.C. 657s).

x (27) 52.222-3, Convict Labor (JUN 2003) (E.O. 11755).

x(28) 52.222-19, Child Labor--Cooperation with Authorities and Remedies (JAN 2022) (E.O. 13126).

x (29) 52.222-21, Prohibition of Segregated Facilities (APR 20 l 5).

x (30)(i) 52.222-26, Equal Opportunity (SEPT 2016) (E.O. 11246).

__ (ii) Alternate I (FEB 1999) of 52.222-26.

x (31 )(i) 52.222-35, Equal Opportunity for Veterans (JUN 2020) (38 U.S.C. 4212).

__ (ii) Alternate I (JUL 2014) of 52.222-35.

x (32)(i) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

__ (ii) Alternate I (JUL 2014) of52.222-36.

x (33) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

x (34) 52.222-40, Notification ofEmployee Rights Under the National Labor Relations Act (DEC 2010) (E.O.

13496).

x (35)(i) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

__ (ii) Alternate l (MAR 2015) of52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

__ (36) 52.222-54, Employment Eligibility Verification (MAY 2022). (E. 0. 12989). (Not applicable to the acquisition of commercially available off-the-shelf items or certain other types of commercial products or commercial services as prescribed in FAR 22.1803.)

__ (37)(i) 52.223-9, Estimate of Percentage of Recovered Material Content for EPA-Designated Items (MAY 2008) ( 42 U.S.C. 6962(c)(3)(A)(ii)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (ii) Alternate I (MAY 2008) of 52.223-9 ( 42 U.S.C. 6962(i)(2)(C)). (Not applicable to the acquisition of commercially available off-the-shelf items.)

__ (38) 52.223-11, Ozone-Depleting Substances and High Global Warming Potential Hydrotluorocarbons (JUN 2016) (E.O. 13693).

x (39) 52.223-12, Maintenance, Service, Repair, or Disposal of Refrigeration Equipment and Air Conditioners (JUN 2016) (E.O. 13693).

__ (40) (i) 52.223-13, Acquisition ofEPEAT® Registered Imaging Equipment (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (OCT 2015) of52.223-13.

__ (41 )(i) 52.223-14, Acquisition ofEPEAT® Registered Televisions (JUN 2014) (E.O.s 13423 and 13514).

__ (ii) Alternate I (JUN 2014) of 52.223-14.

__ ( 42) 52.223-15, Energy Efficiency in Energy-Consqming Products (MAY 2020) (42 U.S.C. 8259b ).

__ ( 43)(i) 52.223-16, Acquisition of EPEAT®-Registered Personal Computer Products (OCT 2015) (E.O.s 13423 and 13514).

__ (ii) Alternate l (JUN 2014) of 52.223-16.

x ( 44) 52.223-18, Encouraging Contractor Policies to Ban Text Messaging While Driving (JUN 2020) (E.O. 13513).

__ (45) 52.223-20, Aerosols (JUN 2016) (E.O. 13693).

x (46) 52.223-21, Foams (JUN 2016) (E.O. 13693).

__ (47)(i) 52.224-3, Privacy Training (JAN 2017) (5 U.S.C. 552a).

__ (ii) Alternate I (JAN 2017) of 52224-3.

__ ( 48) 52.225-1, Buy Arnerican--Supplies (NOV 2021) (41 U.S.C. chapter 83).

__ ( 49) (i) 52.225-3, Buy Arnerican--Free Trade Agreements--Israeli Trade Act (NOV 2021) ( 41 U.S.C. chapter 83, 19 U.S.C. 3301 note, 19 U.S.C. 2112 note, 19 U.S.C. 3805 note, 19 U.S.C. 4001 note, Pub. L. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42,and 112-43.

__ (ii) Alternate I (JAN 2021) of 52.225-3.

__ (iii) Alternate IT (JAN 202 I) of 52.225-3.

__ (iv) Alternate III (JAN 2021) of52.225-3.

__ (50) 52.225-5, Trade Agreements (OCT 2019) 19 U.S.C. 250 I, et seq., 19 U.S.C. 3301 note).

__ (51) 52.225-13, Restrictions on Certain Foreign Purchases (FEB 2021) (E.O.'s, proclamations, and statutes administered by the Office of Foreign Assets Control of the Department of the Treasury).

__ (52) 52.225-26, Contractors Performing Private Security Functions Outside the United States (OCT 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; JO U.S.C. 2302 Note).

__ (53) 52.226-4, Notice of Disaster or Emergency Area Set-Aside (NOV 2007) (42 U.S.C. 5150

__ (54) 52.226-5, Restrictions on Subcontracting Outside Disaster or Emergency Area (NOV 2007) (42 U.S.C.

5150).

__ (55) 52.229-12, Tax on Certain Foreign Procurements (FEB 2021 ).

__ (56) 52.232-29, Terms for Financing of Purchases of Commercial Products and Commercial Services (NOV 2021) (41 U.S.C. 4505, 10 U.S.C. 2307(£)).

__ (57) 52.232-30, installment Payments for Commercial Products and Commercial Services (NOY 2021) (41 u.s.c. 4505, 10 u.s.c. 2307(£)).

x (58) 52.232-33, Payment by Electronic Funds Transfer-System for Award Management (OCT 2018) (31 U.S.C.

3332).

__ (59) 52.232-34, Payment by Electronic Funds Transfer-Other than System for Award Management (JUL 2013) (31 U.S.C. 3332).

__ (60) 52.232-36, Payment by Third Party (MAY 2014) (31 U.S.C. 3332).

__ (61) 52.239-1, Privacy or Security Safeguards (AUG 1996) (5 U.S.C. 552a).

W9 l 27N22P0089

__ (62) 52.242-5, Payments to Small Business Subcontractors (JAN 2017)(15 U.S.C. 637(d)(L3)).

__ (63)(i) 52.247-64, Preference for Privately Owned U.S.-Flag Commercial Vessels (NOV 2021) (46 U.S.C.

55305 and 10 U.S.C. 2631).

__ (ii) Alternate L (APR 2003) of52.247-64.

__ (iii) Alternate II (NOV 2021) of 52.247-64.

( c) The Contractor shall comply with the FAR clauses in this paragraph (c), applicable to commercial services, that the Contracting Officer has indicated as being incorporated in this contract by reference to implement provisions of law or Executive orders applicable to acquisitions of commercial products and commercial services: [Contracting Officer check as appropriate.]

__ (l) 52.222-41, Service Contract Labor Standards (AUG 2018) (41 U.S.C. chapter 67).

__ (2) 52.222-42, Statement of Equivalent Rates for Federal Hires (MAY 2014) (29 U.S.C. 206 and 41 U.S.C.

chapter 67).

__ (3) 52.222-43, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (Multiple Year and Option Contracts) (AUG 2018) (29 U.S.C. 206 and 41 U.S.C. chapter 67).

__ ( 4) 52.222-44, Fair Labor Standards Act and Service Contract Labor Standards--Price Adjustment (MAY 2014) (29 U.S.C 206 and 41 U.S.C. chapter 67).

(5) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (MAY 2014) (41 U.S.C. chapter 67).

__ (6) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (MAY 2014) ( 41 U .S.C. chapter 67).

(7) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022) (E.O.

13658).

__ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.0. l 3706).

__ (9) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations (JUN 2020) (42 U.S.C. 1792).

(d) Comptroller General Examination of Record. The Contractor shall comply with the provisions of this paragraph

(d) if this contract was awarded using other than sealed bid, is in excess of the simplified acquisition threshold, as defined in FAR 2.10 I, on the date of award of this contract, and does not contain the clause at 52.215-2, Audit and Records--Negotiation.

(J) The Comptroller General of the United States, or an authorized representative of the Comptroller General, shall have access to and right to examine any of the Contractor's directly pertinent records involving transactions related to this contract.

(2) The Contractor shall make available at its offices at all reasonable times the records, materials, and other evidence for examination, audit, or reproduction, until 3 years after final payment under this contract or for any shorter period specified in FAR Subpart 4. 7, Contractor Records Retention, of the other clauses of this contract. If this contract is completely or partially terminated, the records relating to the work terminated shall be made available for 3 years after any resulting final termination settlement. Records relating to appeals under the disputes clause or to litigation or the settlement of claims arising under or relating to this contract shall be made available until such appeals, litigation, or claims are finally resolved.

(3) As used in this clause, records include books, documents, accounting procedures and practices, and other data, regardless of type and regardless of form. This does not require the Contractor to create or maintain any record that the Contractor does not maintain in the ordinary course of business or pursuant to a provision of law.

( e) ( 1) Notwithstanding the requirements of the clauses in paragraphs (a), (b ), ( c), and (d) of this clause, the Contractor is not required to flow down any FAR clause, other than those in this paragraph ( e )( 1 )in a subcontract for commercial products or commercial services. Unless otherwise indicated below, the extent of the flow down shall be as required by the clause--

(i) 52.203-13, Contractor Code of Business Ethics and Conduct (NOV 2021) (41 U.S.C. 3509).

(ii) 52.203-19, Prohibition on Requiring Certain Internal Confidentiality Agreements or Statements (JAN 2017) (section 743 of Division E, Title VTI, of the Consolidated and Further Continuing Appropriations Act, 2015 (Pub. L.

113-235) and its successor provisions in subsequent appropriations acts (and as extended in continuing resolutions)).

(iii) 52.204-23, Prohibition on Contracting for Hardware, Software, and Services Developed or Provided by Kaspersky Lab and Other Covered Entities (NOV 2021) (Section 1634 of Pub. L. 115-91).

(iv) 52.204-25, Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment. (NOV 2021) (Section 889(a)(l)(A) of Pub. L. 115-232).

(v) 52.219-8, Utilization of Small Business Concerns (Oct 2018) (15 U.S.C. 637(d)(2) and (3)), in all subcontracts that offer further subcontracting opportunities. Iftbe subcontract (except subcontracts to small business concerns) exceeds the applicable threshold specified in FAR 19. 702(a) on the date of subcontract award, the subcontractor must include 52.219-8 in lower tier subcontracts that offer subcontracting opportunities.

(vi) 52.222-21, Prohibition of Segregated Facilities (Apr 2015).

(vii) 52.222-26, Equal Opportunity (Sep 2016) (E.O. 11246).

(viii) 52.222-35, Equal Opportunity for Veterans (J U

N 2020) (38 U.S.C. 4212).

(ix) 52.222-36, Equal Opportunity for Workers with Disabilities (JUN 2020) (29 U.S.C. 793).

(x) 52.222-37, Employment Reports on Veterans (JUN 2020) (38 U.S.C. 4212).

(xi) 52.222-40, Notification of Employee Rights Under the National Labor Relations Act (Dec 20 I 0) (E.O. 13496).

Flow down required in accordance with paragraph (f) of FAR clause 52.222-40.

(xii) 52.222-41, Service Contract Labor Standards (Aug 2018), (41 U.S.C. chapter 67).

(xiii) __ (A) 52.222-50, Combating Trafficking in Persons (NOV 2021) (22 U.S.C. chapter 78 and E.O. 13627).

__ (B) Alternate 1 (March 2, 2015) of 52.222-50 (22 U.S.C. chapter 78 and E.O. 13627).

(xiv) 52.222-51, Exemption from Application of the Service Contract Labor Standards to Contracts for Maintenance, Calibration, or Repair of Certain Equipment--Requirements (May 2014) (41 U.S.C. chapter 67.)

(xv) 52.222-53, Exemption from Application of the Service Contract Labor Standards to Contracts for Certain Services--Requirements (May 2014) (41 U.S.C. chapter 67)

W9127N22P0089

(xvi) 52.222-54, Employment Eligibility Verification (MAY 2022) (E. 0. 12989).

(xvii) 52.222-55, Minimum Wages for Contractor Workers Under Executive Order 14026 (JAN 2022) (E.O. 13658).

(xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (JAN 2022) (E.O. 13706).

(xix) (A) 52.224-3, Privacy Training (Jan 2017) (5 U.S.C. 552a).

(B) Alternate I (Jan 2017) of 52.224-3.

(xx) 52.225-26, Contractors Performing Private Security Functions Outside the United States (Oct 2016) (Section 862, as amended, of the National Defense Authorization Act for Fiscal Year 2008; JO U.S.C. 2302 Note).

(xxi) 52.226-6, Promoting Excess Food Donation to Nonprofit Organizations. (JUN 2020) ( 42 U.S.C. 1792). Flow down required in accordance with paragraph (e) of FAR clause 52.226-6.

(xxii) 52.247-64, Preference for Privately-Owned U.S. Flag Commercial Vessels (NOV 2021) (46 U.S.C. 55305 and 10 U.S.C. 2631). Flow down required in accordance with paragraph (d) of FAR clause 52.247-64.

(2) While not required, the Contractor may include in its subcontracts for commercial products and commercial services a minimal number of additional clauses necessary to satisfy its contractual obligations.

(End of clause)

52.252-2 CLAUSES INCORPORATED BY REFERENCE (FEB 1998)

This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es):

www.acquisition.gov

(End of clause)

52.252-6 AUTHORIZED DEVIATIONS IN CLAUSES (NOV 2020)

(a) The use in this solicitation or contract of any Federal Acquisition Regulation (48 CFR Chapter I) clause with an authorized deviation is indicated by the addition of"(DEVIATION)" after the date of the clause.

(b) The use in this solicitation or contract of any DFARS (48 CFR Chapter 2) clause with an authorized deviation is indicated by the addition of "(DEVIATION)" after the name of the regulation.

(End ofclause)

Purchase Description for the

Columbia River Stern Mooring Buoy Assembly Portland, Oregon

Date: April 18, 2022

1.0 REFERENCES

1.1 REGULATIONS

COAST GUARD, DEPARTMENT OF TRANSPORTATION

46 CFR 164.018 Retroreflective Material for Lifesaving Equipment.

33 CFR 62.35 Mooring Buoys

DEPARTMENT OF DEFENSE

MIL-PRF-23236D Coating Systems for Ship Structures

MIL-PRF-22750 Epoxy Polyamide Coating

MIL-PRF-24667C Coating System, Non-Skid, For Roll, Spray, Or Self-Adhering Applications (22 May 2008)

NAVAL FACILITIES ENGINEERING COMMAND

Drawing 3050574 Buoy, Mooring Foam-Filled Polyurethane 11.5 Ft Class AAA

Drawing 3026376 Anodes, Corrosion Preventive, Fleet Mooring Chain Stud Link

FEDERAL

FED-STD-595 Colors.

VV-G-671 Grease, Graphite

TT-C-490E Chemical Conversion Coatings and Pretreatments for Ferrous Surfaces (Base for Organic Coatings)

TT-E-489 Enamel, Alkyd, Gloss, Low VOCD Content.

1.2 NON-GOVERNMENT PUBLICATIONS

The following Non-Government Publications form a part of this purchase description to the extent specified herein.

AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)

A123 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products, Specification for.

A153 Zinc Coating (Hot-Dip) on Iron and Steel Hardware, Specification for

A36 Standard Specification for Carbon Structural Steel.

A519 GR4140 Seamless Carbon and Alloy Steel Mechanical Tubing.

A572 GR50 Standard Specification for High-Strength Low- Alloy Columbium-Vanadium Structural Steel.

B633 Electrodeposited Coatings of Zinc on Iron and Steel, Specification for.

C273 Shear Test in Flatwise Plane of Flat Sandwich Construction of Sandwich Cores, Methods For.

D1621 Compressive Properties of Rigid Cellular Plastics, Test Method For.

D1622 Apparent Density of Rigid Cellular Plastics, Test Methods For.

D1623 Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics, Test Methods For.

D1630 Rubber Property-Abrasion Resistance (NBS Abrader), Test Method For.

D1667 Flexible Cellular Materials-Vinyl Chloride Polymers and Copolymers (Closed Cell Vinyl), Specification For.

D2240 Rubber Property-Durometer Hardness, Test Method For.

D2244 Calculation of Color Differences from Instrumentally Measured Color Coordinates, Method For.

D412 Rubber Properties in Tension, Test Methods For.

D6226 Open Cell Content of Rigid Cellular Plastics, Test Methods For.

E709 Standard Guide for Magnetic Particle Testing.

G53 Operating Light-and water-Exposure Apparatus (Fluorescent UV- Condensation Type) for Exposure of Nonmetallic Materials, Recommended Practice For.

AMERICAN SOCIETY OF MECHANICAL ENGINEERS

B18.2.1 Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series)

AMERICAN BUREAU OF SHIPPING

ABS 39 Guide for the Certification of Offshore Moorings Chain

AMERICAN WELDING SOCIETY (AWS)

D1.1 Structural Welding Code, Steel

STEEL STRUCTURES PAINTING COUNCIL (SSPC)

SSPC-PA-1 Shop, Field and Maintenance Painting.

SSPC-PA-2 Measurement of Dry Paint Thickness with Magnetic Gages.

SSPC-PA-3 Safety of Paint Application.

SSPC Paint 20 Zinc-Rich Coating Type II Organic

SSPC PS 42 Paint Specification No. 42, Epoxy Polyamide/Polyamidoam

SSPC-SP10 Near-White Blast Cleaning

SSPC-VIS1 Abrasive Blast Cleaned Clean Steel

AMERICAN PETROLEUM INSTITUTE (API)

5L Grade X52 Seamless Line Pipe

AMERICAN INSTITUTE OF STEEL CONSTRUCTION (AISC)

AISC 325-11-11 Steel Construction Manual 14th edition

2.0 GENERAL

Supply one medium foam mooring buoy assembly, and deliver to the US Moorings, 8010 NW St.

Helens Rd. Portland, OR 97210. The mooring buoy assembly must include one 11.5 foot fleet mooring medium tension bar with a shipping cradle, one navigation light stand, one external radar reflector with mounting hardware, one quick release buoy hook with adapter, one 4 inch anchor bolt shackle, and one 76mm kenter-type joining link.

2.1 DELIVERY INFORMATION

All items must be delivered to the location specified in Section 2.0 no later than 90 calendar days after Contract Award.

3.0 BUOY REQUIREMENTS

The buoy must have a tension bar through the center with a minimum proof load of 800,000 pounds running the length of the buoy body, padeyes on each end, rigid and flexible foam interior, a nonskid surface topside, a polyurethane outer shell (colored white) for durability and flexibility, top toe and hand chafing rails with drainage, buoy hook shock pad, identification plate, reflective tapes, a navigation light stand, shipping cradle, and zinc anodes on the submerged part of the strength member for cathodic protection. The dimensions of the buoy are similar to the current medium foam tension bar buoy in use at US Navy Fleet Moorings and in inventory. Medium foam buoy dimensions and criteria is provided in Table I. The buoy must be manufactured to have a design life of 20 years. Proposed foam buoy design must meet or exceed all performance criteria stated in this section.

TABLE I

PARAMETERS 11.5-FOOT BUOY

Weight in Air 10,400 lbs

Net Buoyancy 39,000 lbs

Working Buoyancy (24” FB) 20,320 lbs

Proof Load on Bar (0.6 Fy) 600 kips

Working Load of Bar (0.3Fy) 300 kips

Diameter of Hull 11 ft 6 in

Length of Hull Overall 8 ft 9 in

Length of Tension Bar 13 ft I in

Height of Cylindrical Portion 5 ft 7 in

Height of Conical Portion 3 ft 2 in

Bar Thickness (top/bottom) 5/3.5 in

Top Padeye ID (top/bottom) 4.5/5 in

Shackle on Top 4 inch

Maximum Chain Size 4 inch

Min. Recommended Riser Wt 7,500 lbs

Riser Wt for 24” freeboard 18,680 lbs

Max. Recommended Riser W 21,264 lbs

Moment to Heel 1 deg

Min Riser Wt 1,183 ft-lbs

Max Riser Wt 2,910 ft-lbs

3.1 BUOYANCY REQUIREMENTS

3.1.1 Working & Net Buoyancy

The buoy must have a minimum working buoyancy of 20,320 pounds and a minimum net buoyancy of 39,000 pounds. Working buoyancy is the buoyancy available at a freeboard of 2 feet. Net buoyancy is the buoy’s total displacement minus the weight of the buoy.

3.1.2 Buoy Stability

With a minimum suspended riser load of 7,500 pounds on the lower tension bar padeye, the buoy must have a heel no greater than 2 degrees with two 200 pound people standing 6 inches from the edge of the buoy and the proposed 675 kip buoy hook with adaptor attached to the top tension bar padeye, all on the same side.

3.2 BUOY TENSION MEMBER

3.2.1 Strength

The primary strength member –

a. Must be a tension bar running the entire length of the buoy shell with 2 padeyes on each end.

b. Must be proof tested to at least 800,000 lbs

c. Must have a working load of at least 400,000 lbs.

d. Must be fabricated and structurally designed to meet the required proof test within allowable stress value in accordance with the latest edition of AISC Steel Construction Manual.

e. Plate stock for padeyes and boss plates must conform to ASTM A572 Grade 50, minimum.

f. Tension bar pipe must conform to API 5L X52 or equal.

g. Minimum pipe size must be 16-inch schedule 100.

h. Stiffener plates must be welded between deck plates and the tension member to withstand bending forces due to the buoy’s total available submerged buoyancy as well as its suspended weight in the horizontal direction.

i. Steel used in fabrication must be free from kinks, sharp bends, laminations, and other conditions which would be deleterious to the finished product.

j. Manufacturing processes must not reduce the strength of the steel

k. All bends must be made by controlled means to ensure uniformity of size and shape and be free from cracks and laminations.

3.2.2 Tension Member Fittings

a. The Padeye hole on both top and bottom tension bar padeyes must be sized to accommodate a removable abrasion resistant bushing of steel conforming to ASTM A519, Grade 4140.

b. The bushing must have a minimum thickness of 0.25-inches.

c. The bushings must be press fit into the end fittings after being cold shrunk.

d. The bushing must be heat treated to a hardness of 100 Rockwell minimum.

e. Bottom tension bar and tension bar padeye dimensions below the buoy hull must be as shown in Drawing 3050574, Attachment 1, to accommodate a 4-inch anchor bolt shackle.

f. Top tension bar and tension bar padeye dimensions above the buoy hull must be as shown in Drawing 3050574, Attachment 1, in order to accommodate a 4-inch anchor bolt shackle or the hook adaptor for a WCS 675 kip buoy hook.

g. The width of the top and bottom tension bar padeye at the shackle connection must be sized to provide a maximum cumulative gap of 0.5-inches between the bale of the shackle and the padeye by providing boss plates welded to the padeye on both sides as needed.

h. The top tension bar padeye must not allow the buoy hook to flip 180 degrees, so that the buoy hook is always lying on the buoy deck with the open side facing up.

i. Include 4 Fleet Mooring 4-inch zinc anodes, 2 each on both sides of the bottom tension bar in accordance with Drawing 3050574, Attachment 1, and Drawing 3026376-9, Attachment 2, attached with Hex Cap Screw conforming to ANSI B18.2.1 for a .375-16 UNC-2A Grade 5 Screw of Galvanized Steel

j. Tapped holes must be .375- 16UNC-2B with a minimum depth of 1-inch.

k. Holes must be located as shown in Detail 6-B and 8-B of Drawing 3050574, Attachment 1, sheet 3 and must be at least 2 inches below the top edge of the lower tension bar padeye that extends below any end caps or split ring plates.

l. The holes tapped in the lower fitting must be filled with graphite grease conforming to VV-G- 671, Grade 2 and stainless bolts must be installed to protect the threads prior to coating.

3.3 STEEL CORROSION PROTECTION

All steel, except stainless steel, the padeye wear bushings, and the inside of the main core weldment tension member, must be provided with corrosion protection. Corrosion protection must be designed by the Manufacturer and submitted to the Government for approval. Corrosion protection must be provided by galvanization or a coating system as per section 3.3.1. Corrosion protection shall be performed after successful completion of the tension member proof test as described in section 5.1.

3.3.1 Hot Dip Galvanizing

a. All steel items except the padeye wear bushings must be galvanized conforming to ASTM A123, Grade 100. Threaded bolts, screws, and plugs must fit counterpart threads after galvanizing.

Galvanizing must take place after all welding, weld inspections, and proof testing as required by this purchase description. All exposed steel parts, (parts not covered by foam and urethane) must be preconditioned with a coating conforming to TT-C-490E, Type III, and subsequently an epoxy-polyamide coating system must be applied in conformance with MIL-PRF-22750F or SSPC Paint Specification No. 42. Color of topcoat on external steel components must be white similar to Color Chip No. 27886 of Federal Standard No. 595.

b. An alternative coating system for exposed steel parts (parts not covered by foam and urethane) may be submitted to the Government for acceptance. The alternative coating plan must include proposed QC test plan to be performed during coating application.

3.3.2 Preparation, Application and Inspection of Coating System

Preparation of steel surfaces must be in accordance ASTM A123, Grade 100. Application of the coating system must be in accordance with the coating manufacturer’s instructions for application conditions and procedures and safety. Inspection of surface preparation and coating application and inspection must be in accordance with SSPC, (or equal) standards. The urethane shell must overlap the coating system on the ends by no more than 4 inches. The interface between the urethane elastomer and the core/tension member must be “feathered” or tapered.

3.4 WELDING

a . All welding must conform to the requirements of AWS D1.1.

b . Manufacturer must provide the services of an AWS Certified Weld Inspector (CWI) to oversee fabrication and testing of all welds.

c. The CWI must be responsible for assuring overall compliance with AWS D1.1.

d . Certificates of welder qualification and qualified welding procedures in accordance with AWS D1.1 and approved by the CWI must be submitted to the Government at least 5 days prior to any welding.

e . All welds must meet or exceed acceptance levels as dictated by AWS D1.1. Any welds not meeting or exceeding these levels must be repaired.

f. A repair procedure conforming to AWS D1.1 requirements must be submitted to the Government for approval prior to any rewelding.

g . Welding procedures must be in accordance with AWS D1.1.

h . The surface of parts to be welded must be free from rust, scale, paint, grease, or other foreign matter.

i . Weld specification, type and size must be in accordance with the manufacturer strength member’s design in accordance with section 3.2.1.

j. Welds between the tension member pipe and eye plate must be inspected by magnetic particle after proof loading in accordance with section 5.1.

k. The buoy manufacturer must perform steel fabrication and welding operations to prevent warpage of the deck plates.

3.5 FOAM

The hull portion of the buoy must be completely foam filled about the tension member. The characteristics of the foams must be as described in sections 3.5.1 and 3.5.2.

3.5.1 Rigid Foam

a . Rigid polyurethane foam must be a closed cell cross-linked foam formed around the tension bar and inside of the tension bar.

b. Rigid foam must meet the following properties as shown in Table II.

TABLE II

ITEM SPECIFICATION VALUE

a Core Density, As Fabricated

(ASTM D1622)

3.5 to 4.5 lbs./ft3 b Tensile Strength (ASTM D1623) 70 psi Minimum c Shear Strength (ASTM C273) 30 psi Minimum d Water Absorption (ASTM D2842) 0.05 lbs./ft2 Maximum e Compressive Strength (ASTM

D1621) Perpendicular to Foam Rise Parallel to Foam Rise

Stress at 8% deformation

26 psi, Minimum 50 psi Minimum f Closed Cells (ASTM D6226) 90% Minimum

c. The bond between the rigid interior foam and the tension bar must be equal to or greater than the rigid foam shear strength.

d . The cast rigid interior foam core must have a smooth exterior surface before application of the flexible foam.

e. Voids on the surface exceeding one cubic inch must be patched with additional rigid foam prior to application of the flexible foam.

f. Application of rigid foam must be performed without cutting of permanent holes in the top deck plate.

3.5.2 Flexible Foam

a . Flexible polyurethane foam must be formed around the rigid foam.

b. The flexible foam surrounding the rigid foam core must be closed-cell, chemically cross-linked polyethylene foam of the characteristics listed in Table III.

TABLE III

ITEM SPECIFICATION VALUE

a Density (ASTM D1667) 3.5 to 4.5 lbs./ft3 b Tensile Strength (ASTM D412) 60 psi Minimum c Tear Resistance (ASTM D624) 16 lbs./in Minimum d Elongation (ASTM D412) 100% Minimum e Water Absorption (ASTM D1667) 0.2 lbs./ft2 Maximum f Compressive Strength (ASTM D1667) 16 psi Minimum at 40%

Deformation

c. The minimum thickness of the flexible foam surrounding the rigid foam must be 6 inches along the sides of the hull and 3 inches along the sides of any peg-top shaped bottom portion of the hull.

d . The flexible foam must be a homogeneous construction and must not be in chip or granular form, neither loose packed nor bound with a discontinuous filler material.

e. The flexible foam interior must adhere uniformly to the rigid foam and be free from cracks, tears, holes and voids.

f. The bond between the flexible foam and the rigid interior foam must be equal to or greater than the tear strength of the flexible foam.

g. The bond between layers of flexible foam must be equal to or greater than the tear strength of the flexible foam.

h. The ends or edges of the flexible foam adjacent to the urethane elastomer shell must be “feathered” or tapered to prevent a vertical dimple or depression along a line on the outer urethane shell.

3.6 URETHANE SHELL

a. The entire polyurethane shell of the buoy, encasing the entire foam buoy and onto the steel portion of the internal core must be a nylon filament-reinforced PTMEG aromatic elastomer. The elastomer and filaments must be applied in a continuous manner to assure adhesion between the various layers. There must be at least 1 wrap for every 0.116 in (2.9 mm) of skin thickness (rounded to the nearest complete wrap). The outer 10% of the elastomer shell must have no filament reinforcement. The polyurethane shell of the buoy must be made white by pigment addition with ultraviolet inhibitors and have the following cured properties listed in Table IV.

TABLE IV

ITEM SPECIFICATION VALUE

Color White a Shore A Hardness (ASTM D2240) 75 to 85 b Tensile Strength (ASTM D412) 2500 psi Minimum c Tear Strength (ASTM, D624) 185 lbs./in

Minimum d Elongation (ASTM D412) 300% Minimum e Compressive Strength 16 psi Minimum at

40% Deformation f Abrasion Resistance (ASTM D1630) 100 Minimum g UV-B Light-Water Exposure – 36 hours

(ASTM G154 Cycle 4) Delta E (ASTM, D2244) must not exceed .75

b. The polyurethane skin reinforcement is to be constructed of continuous spun nylon filament wraps.

Each nylon filament is to be of 2,520-dernier nominal weight, 52 pound minimum break strength and ultimate elongation of 16%. Construct each filament-reinforcing wrap of continuous filaments in a helical pattern, at a helix angle of 45 degrees to 60 degrees to the longitudinal axis of the fender. The spacing between the filaments in the same helix must be no more than 0.125 in (3.2 mm), measured in a direction parallel to the longitudinal axis of the buoy. Each wrap must extend along the entire longitudinal axis of the buoy and must also encircle and encase the buoy.

c. The white color of the outer shell must be similar to Color Chip No. 27886 of Federal Standard No.

595, must be uniform throughout the thickness of the polyurethane shell and remain white after ultraviolet exposure for the 20 year design life of the buoy.

d. The urethane shell must be free from cracks, warpage, or blistered surfaces and must have a smooth surface. There must be no flaws which adversely affect the function of the shell. Surface marks or flaws must not exceed one percent of the surface area or 0.125 inch in depth, length, or width. Surface grinding must not be used to remove flaws below the surface of the urethane skin.

The buoy must have a smooth exterior surface.

e. The urethane shell must have an average thickness of 1-inch with a minimum thickness of 0.75- inch inch. No more than 5 percent of the buoy outer shell must be less than 0.875-inch.

f. The polyurethane shell must be sealed to the tension member. The method of sealing the polyurethane shell to the tension member must be submitted to the Government for approval.

3.7 BUOY DIMENSIONS, CENTER OF GRAVITY AND WEIGHT CHECKS

a. The buoy diameter must be a minimum of 11.5 feet. The length of the tension member external to the shell must be sized to insure 180 degree rotation of the specified connecting components (90 degree rotation about the longitudinal direction on both sides of the tension bar member) and to provide sufficient space for installation of replacement zinc anodes performed by divers.

b. The location of the buoy’s center of gravity must be along the center of the tension bar member and the vertical location of the center of gravity must be below mid shell height. This location of the buoy’s center of gravity excludes the connecting hardware to the tension bar padeyes as well as navigation light.

c. The buoy weight must be recorded at four stages: (1) Core weldment prior to application of rigid foam; (2) After application of rigid foam, prior to application of flexible foam; (3) After application of flexible foam; and (4) After final completion.

3.8 TOP DECK TOE AND HAND RAILS

a. A toe and hand rail must be provided on top of the buoy. The toe rail must be 12 inches from the outer shell. The hand rail must be 24 inches from the center of the tension bar. Drainage holes or gaps must be provided within the rails small enough to keep the mooring line from settling in the gap or space and large enough to keep from getting crushed by the mooring line. The rails must be structurally secured to the internal steel top plate and the connections between the toe rail and the internal steel top plate sealed to prevent water intrusion. The toe rail must also be bonded to the outer urethane shell. The color of the toe rails must be black throughout its thickness, conforming to Color Chip No. 17038 of Federal Standard No. 595.

b. At the location on the top deck of the buoy where the proposed buoy hook will come into contact with the deck, a D-fender softener (hook pad) will be structurally secured to the deck of the buoy in a similar manner as the rails. A doubler plate must be welded onto the underlying top deck steel plate to reinforce this area. Portions of the toe and/or hand rails that would be below the buoy hook and come into contact with the buoy hook must not be installed in this area.

3.9 NON-SKID DECK COVERING

A rollable, polyurethane base, resilient nonskid deck covering, color black, conforming to MIL-PRF-24667C must be applied to the buoy deck to within 6 inches of the buoy’s edge. The covering must be applied so as to achieve an aggressive texture. The covering must be applied in accordance with the manufacturer’s instructions for application over elastomeric products, and so that the surface of the covering presents a uniform appearance without ridges or troughs. The nonskid deck coating must be a deck gray, similar to Color Chip No. 36076.

3.10 REFLECTIVE TAPE

a. The buoy must have a 6-inch wide reflective tape band permanently bonded to the urethane shell approximately 1.5 feet below the top deck encompassing the diameter of the buoy. The reflective tape must conform to USCG 46 CFR Part 164, Subpart 164.018, Type II retroreflective material with a daytime color or silver and a reflected color of white.

b. The buoy must have a 6-inch wide blue band, bonded to the urethane shell approximately 2.5 feet below the top deck encompassing the diameter of the buoy. The design basis for the blue band is

3M Scotchlite, Series 680, PN79985.

c. The reflective tapes must be free of cracks, wrinkles, ragged edges, and foreign matter. The urethane surface should be made tacky by preparing it with a compatible solvent, and then the tape should be immediately applied. The manufacturer must apply the tape in such a manner as to ensure a secure bond with the urethane. Wrinkles, blisters, or other separations must not exceed one percent of the tape surface area.

3.11 NAVIGATION LIGHT STAND

A navigation light stand compatible with the Carmanah M650 must be provided to attach a navigation light to the buoy above the toe rail level and at a location just inside of the toe rail on the side opposite where the buoy hook will be positioned at rest. The navigation light stand must be partially or totally removable from the base plate. The deck of the buoy must be sealed around the light base to prevent water intrusion.

3.12 IDENTIFICATION PLATE

The buoy must have an identification plate with stamped or engraved characters to a minimum depth of 0.015 inches. Identification plate information must be similar in content as shown in Attachment

3. Identification plate material may be any standard grade commercial sheet brass of 0.125 inches minimum thickness. Characters must be filled with black enamel in accordance with TT-E-489, type optional. The location of the identification plate must allow the identification plate to be completely visible with top jewelry is attached to the buoy. The Manufacturer must propose a suitable attachment method for the identification plate to the strength member on the topside of the buoy.

Information required to be provided in the identification plate is; (1) Buoy maximum diameter and overall height; (2) Maximum tension bar load; (3) Weight in air; (4) Working buoyancy; (5) Manufacturer, date and month of buoy manufacture and serial number; and (6) Manufacturer’s design drawing. A representative identification plate is shown in Attachment 3 for guidance. The identification plate must also include the upper sentence “ACOE PORTLAND DISTRICT” and lower sentence “DO NOT PAINT”. The second sentence must state “BUOY MOORING, TENSION

BAR 200 TONS WLL.”

3.13 SHIPPING CONTAINER OR CRADLE

a. The foam buoy must be placed in a suitable shipping container or cradle of substantial construction suitable for commercial transport by the chosen carrier(s). The container must maintain the shape of the buoy without crushing the body. The container must be accepted by the Government prior to shipping the buoy.

b. The shipping container or cradle must not be used to lift the assembly. Protect the buoy’s coating system and urethane hull from damage during shipping, using recyclable materials, where possible.

3.14 STENCILING

Stenciling in 6-inch black letters of the…