Dwg PN DPW3249SP.pdf

This is a technical specification document for temporary ventilation standard fittings, specifically sheet F-8 of F-8 from the Engineering & Planning Department (Code 260), Revision F.

The document provides detailed engineering drawings and specifications for the ZF5A-5" Lever Clamp Cloth Flux End Fitting. The specification includes four fitting shape configurations illustrated for fittings ZF5A through ZF5E, with detailed dimensional requirements. Key specifications require an outside diameter of the rolled edge (dimension A) of 5 5/16" (+1/32", -1/16"), an outside diameter of the raw end (dimension B) of 4.90" to 4.97", and a body dimension C of 4" (+1/2", -1/4"). The rolled edge height ranges from 2" to 3 1/2" depending on the configuration. Body material shall be 20 gauge or thicker galvanized steel, or 0.050" or thicker 5000 or 6000 series aluminum. End connections must be compatible with Nordfab QF or equivalent fittings, with continuous welds required; exterior welds must be flush or recessed. The document specifies that the rolled edge must be compatible with Nordfab 5" or 8" Quick Fit clamps available from PSNS&IMF Shop 99 Vent Section. Shop 17 is designated as the manufacturer or vendor supplier. A vendor part number DPW-3249-SP is referenced for procurement purposes.