DTRA_SBIR_27BZ_R2.pdf

PDF 442 KB Posted

Attached to
Validation and Verification of Computational Modeling of Human Blast Injury on Battlefield
Solicitation number
DTR27BZ02-NV004
Issued by

About this file

This document is the Defense Threat Reduction Agency (DTRA) 2027 Small Business Innovation Research (SBIR) Broad Agency Announcement (BAA) Release 2 containing proposal submission instructions and six approved research topics.

The solicitation establishes a competitive SBIR program for small business concerns to develop innovative technologies supporting DTRA's mission to counter and deter weapons of mass destruction. Phase I proposals must not exceed 20 pages in the technical volume and $250,000 in cost (excluding Technical and Business Assistance funding capped at $6,500), with a seven-month performance period. Phase II awards are limited to $1,500,000 (excluding TABA funding capped at $50,000) over a maximum 24-month duration. All proposals must be submitted through the DoW SBIR/STTR Innovation Portal (DSIP) by specified closing dates. Phase I awards are issued as firm-fixed-price purchase orders; Phase II awards utilize definitive cost contracts. The evaluation authority will select proposals based on technical merit while considering funding limitations and investment balance across all six topics. Selection notification will occur within 90 days of the closing date, with contract execution subject to a 120-day Procurement Acquisition Timeline. The six topics address UAS-based precision aiming for explosive ordnance disposal, remote UAS-based X-ray imaging for device assessment, dynamic sensor-tasking systems for subsurface hazard detection, validation and verification of human blast injury computational modeling, domestic fabrication of high-purity precursor materials for radiation detection scintillator crystals, and domestic scalable growth of large-format pixelated cadmium zinc telluride crystals. All work must comply with International Traffic in Arms Regulations and Export Administration Regulations, with export control compliance remaining the responsibility of the offeror.

View the file

Other files

File Type Posted
DTR27BZ02-NV004.pdf PDF

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

DTRA - 1

Defense Threat Reduction Agency (DTRA) 2027 Small Business Innovation Research (SBIR) BAA

Release 2 Proposal Submission Instructions

INTRODUCTION

The Defense Threat Reduction Agency (DTRA) mission is to enable the Department of War (DoW), the U.S. Government, and International Partners to counter and deter Weapons of Mass Destruction (WMD), Chemical, Biological, Radiological, Nuclear, and Improvised Threat Networks. The DTRA SBIR/STTR program is consistent with the purpose of the Federal SBIR/STTR Program, i.e., to stimulate a partnership of ideas and technologies between innovative small business concerns and through Federal-funded research or research and development (R/R&D).

The approved 2027 topics solicited for the DTRA SBIR/STTR Program are included in these instructions followed by the full topic description. Offerors responding to this Broad Agency Announcement (BAA) solicitation must follow all general instructions provided in the related Department of War Annual Program BAA and submit proposals by the date and time listed in this release. Specific DTRA requirements that add to or deviate from the DoW Annual Program BAA instructions are provided below with references to the appropriate section of the DoW document.

Proposers are encouraged to thoroughly review the DoW Annual Program BAA and register for the DSIP Listserv to remain apprised of important programmatic and contractual changes.

• The full DoW solicitation is available on DSIP at https://www.dodsbirsttr.mil/submissions/solicitation-documents/active-solicitations. Be sure to select the tab for the appropriate solicitation cycle.

• Register for the DSIP Listserv at: https://www.dodsbirsttr.mil/submissions/login.

Specific questions pertaining to the administration of the DTRA SBIR/STTR Program and these proposal preparation instructions should be directed to:

Ms. LaTracia Price Defense Threat Reduction Agency DTRA SBIR/STTR Program Manager 8725 John J. Kingman Road LaTracia.T.Price.civ@mail.mil Stop 6201 Tel: 571-616-6583 Ft. Belvoir, VA 22060-6201

PHASE I PROPOSAL GUIDELINES

The DoW SBIR/STTR Innovation Portal (DSIP) is the official portal for DoW SBIR/STTR proposal submission. Proposers are required to submit proposals via DSIP; proposals submitted by any other means will be disregarded. Detailed instructions regarding registration and proposal submission via DSIP are provided in the DoW solicitation.

Proposal Coversheet (Volume 1) The proposal coversheet is prepared on DSIP and in accordance with the DoW solicitation.

https://www.dodsbirsttr.mil/submissions/solicitation-documents/active-solicitations https://www.dodsbirsttr.mil/submissions/login mailto:LaTracia.T.Price.civ@mail.mil

DTRA - 2

Technical Volume (Volume 2) The technical volume is not to exceed 20 pages and must follow the formatting requirements provided in the DoW solicitation. Only the first 20 pages of the technical volume will be considered in proposal evaluations.

Offerors should follow the DoW SBIR Program BAA guidelines regarding Technical Volume content. A Phase I Proposal Template is available in Appendix A of the DoW SBIR Program BAA.

Cost Volume (Volume 3) The Phase I Base amount, not including the amount allocated for Technical and Business Assistance (TABA), must not exceed $250.000.00. All costs must be clearly identified on the Proposal Cover Sheet (Volume 1) and in Volume 3. DTRA requires the use of the attached excel spreadsheet for the Cost Volume. The cost template becomes visible to the offeror when the Cost Volume is initiated.

The DTRA Cost Volume template 2027 will be accessible once the Cost Volume is initiated.

IMPORTANT: When completing the cost volume, you must provide enough information to allow the agency to understand how you plan to use the requested funds if a contract is awarded. Itemized costs of any subcontract or consultant should be provided to the same level as for the prime small business. If an unsanitized version of costs cannot be provided with the proposal, the Government may request it during negotiations if selected. Refer to the instruction provided in the DoW Annual SBIR program BAA for additional details on the content of the Cost Volume.

Note 1: Cost for travel funds must be justified and related to the needs of the project.

Note 2: Attachment – DTRA SBIR/SITTR Program Funding Limits

Please review the updated Percentage of Work (POW) calculation details included in the DoW Program

BAA.

Note: DTRA normally will not accept any deviation to the POW requirements, however if discovered during review in Contracting, the offeror may be allowed to revise the cost proposal to be in line with DTRA’s requirement limits.

Page Limit, Cost and Duration:

Company Commercialization Report (CCR) (Volume 4) Completion of the CCR as Volume 4 of the proposal submission in DSIP is required. Please refer to the DoW SBIR Program BAA solicitation for full details on this requirement. Information contained in the CCR will not be considered by DTRA during proposal evaluations.

Supporting Documents (Volume 5) Volume 5 is provided for proposing SBCs to submit additional documentation to support the Coversheet (Volume 1), Technical Volume (Volume 2), and the Cost (Volume 3). Please refer to the DoW solicitation for more information.

Project Phase

Technical Vol Page Limit

Cost Duration

Phase I 20 pages $250,000.00 7 Months

DTRA - 3

All proposing small business concerns must submit the following documents to Volume 5:

• Contractor Certification Regarding Provision of Prohibition on Contracting for Certain Telecommunications and Video Surveillance Services or Equipment.

Note: Offerors having any concerns pertaining to mandatory requirement as stated above should provide a mitigation plan addressing the concerns.

Fraud, Waste and Abuse Training (Volume 6) Fraud, Waste and Abuse training material can be found in the Volume 6 section of the proposal submission module in DSIP and must be thoroughly reviewed once per year to proceed with proposal submission.

Disclosures of Foreign Affiliations or Relationships to Foreign Countries (Volume 7) Small business concerns must complete the Disclosures of Foreign Affiliations or Relationships to Foreign Countries webform in Volume 7 of the DSIP proposal submission. Please be aware that the Disclosures of Foreign Affiliations or Relationships to Foreign Countries WILL NOT be accepted as a PDF Supporting Document in Volume 5 of the DSIP proposal submission. Do not upload any previous versions of this form to Volume 5. For additional details, please refer to the DoW Program BAA.

PHASE II PROPOSAL GUIDELINES

Phase II proposals may only be submitted by Phase I awardees.

Those small business concerns submitting a Phase II proposal should plan to submit a fully developed proposal into the DSIP proposal system within thirty (30) days after the end of the Phase I period of performance. The small business concern may or may not be notified of the proposal’s due date.

The Phase II proposal’s Technical Volume should not exceed 20 pages and should generally follow the outline and structure of Phase I to include benefits or lessons learned from the Phase I effort.

DTRA Phase II projects are not to exceed (NTE) a 24-month duration and a ceiling cost of $1,500,000, not including TABA.

DISCRETIONARY TECHNICAL AND BUSINESS ASSISTANCE (TABA)

In accordance with the Small Business Act (15 U.S.C. § 638(q)) and the Small Business Innovation and Economic Security Act of 2026 (P.L. 119-83), the Defense Threat Reduction Agency (DTRA) authorizes recipients of Phase I and Phase II awards to request TABA funding to use for eligible services.

These business-related services are designed to improve the commercialization success of small business concerns. This includes providing access to a network of scientists and engineers across a wide range of technologies or providing access to technical and business databases.

Allowed TABA Focus Areas

• Technical Decision Making o Making improved, evidence-based technical decisions concerning the project.

• Technical Problem Solving o Addressing and solving technical challenges that arise during project execution.

• Risk Mitigation o Minimizing overall technical risks associated with the project.

DTRA - 4

• Product Commercialization o Developing and commercializing new products or processes resulting from the project.

• Cybersecurity Compliance o Assistance with meeting federal and agency cybersecurity requirements.

If you are proposing use of Discretionary Technical and Business Assistance (TABA), you must provide a cost breakdown in the Cost Volume under “Other Direct Costs (ODCs)” and provide a one-page description of the vendor you will use and the Technical and Business Assistance you will receive. For the Phase I project, the amount for TABA may not exceed $6,500 per award. For the Phase II project, the TABA amount may be less than, equal to, but not more than $50,000 per project. The description should be included in Volume 5 of the proposal. TABA activity costs are line item portioned into the contract price.

Approval of Discretionary Technical and Business Assistance is not guaranteed and is subject to review of the contracting officer.

For Discretionary Technical and Business Assistance, small business concerns may propose one or more vendors. Additionally, business-related services aimed at improving the commercialization success of a small business concern may be obtained from an entity, such as a public or private organization or an agency or other entity established or funded by a State that facilitates or accelerates the commercialization of technologies or assists in the creation and growth of private enterprises that are commercializing technology.

TECHNICAL EVALUATION AND SELECTION

All proposals will be evaluated in accordance with the evaluation criteria listed in the DoW SBIR Program BAA.

Proposing firms will be notified of selection or non-selection status for a Phase I award within 90 days of the closing date of the BAA. DTRA has a single Evaluation Authority (EA) for all proposals received under this solicitation. The EA either selects or rejects Phase I and Phase II proposals based upon the results of the review and evaluation process plus other considerations including limitation of funds, and investment balance across all the DTRA topics in the solicitation. To provide this balance, a lower rated proposal in one topic could be selected over a higher rated proposal in a different topic. DTRA reserves the right to select all, some, or none of the proposals in a particular topic.

Notifications

Following the EA decision, the DTRA SBIR/STTR office will release notification e-mails of selection or non-selection status for a Phase I award within 90 days of the closing date of the BAA. The E-mails will be sent to the addresses provided for the Principal Investigator topic and listed Corporate Official.

Offerors may request a debriefing of the evaluation of their not selected proposal and should submit this request via email to: dtra.belvoir.RD.mbx.sbir@mail.mil; the subject line must include “SBIR or STTR Program the full BAA Proposal number T27BZ-NV00X-0XXX Debriefing Request.” Debriefings are provided to help improve the offeror’s potential response to future solicitations. Debriefings do not represent an opportunity to revise or rebut the EA decision.

For selected offers, DTRA Topic Author will build an acquisition package for Finance and the Contract Officer (KO) approval to move to contract execution which is subject to Procurement Acquisition Timeline (PALT) of 120-days to execute the award. DTRA Phase I awards are issued as fixed-price

DTRA - 5

purchase orders with a maximum period of performance of seven months. DTRA may complete Phase I awards without additional negotiations by the contracting officer or without opportunity for revision for proposals that are reasonable and complete.

DTRA Support Contractors

Select DTRA-employed support contractors may have access to contractor information, technical data or computer software that may be marked as proprietary or otherwise marked with restrictive legends. Each DTRA support contractor performs under a contract that contains organizational conflict of interest provisions and/or includes contractual requirements for nondisclosure of proprietary contractor information or data/software marked with restrictive legends. These contractors require access while providing DTRA support such as advisory and assistance services, contract specialist support, and support of the Defense Threat Reduction Information Analysis Center (DTRIAC). The contractor, by submitting a proposal or entering into this contract, is deemed to have consented to the disclosure of its information to DTRA’s support contractors.

Offerors are advised that employees of commercial firms under contract to the Government may be utilized to provide administrative, technical, or advisory support during the proposal evaluation process and subsequent contract administration.

These support contractors may require access to proposals, including proprietary and confidential information, solely for the purpose of providing this required support to the Government. Support contractors are strictly prohibited from evaluating proposals or making any source selection decisions.

To protect offeror information, the Government ensures that all such support contractors are bound by strict corporate and individual Non-Disclosure Agreements (NDAs). These NDAs legally prohibit the unauthorized disclosure of offeror proprietary, confidential, and source selection sensitive information.

Furthermore, these support contractors are subject to rigorous Organizational Conflict of Interest (OCI) clauses that restrict them from using the information for any competitive advantage or for any purpose other than providing the contracted support to DTRA.

By submitting a proposal, the offeror acknowledges that their proposal information may be disclosed to these authorized support contractors for the limited support purposes stated above. Offerors remain responsible for ensuring that all proprietary information within their proposal is appropriately marked in accordance with the solicitation instructions.

Protests

Refer to the DoW SBIR Program BAA for procedures to protest the Announcement.

As further prescribed in FAR 33.107(b), FAR 52.233-3, Protests after Award should be submitted in accordance with FAR Subpart 33.1 – Protests.

Protests filed with the Government Accountability Office (GAO) must be served on the cognizant Contracting Officer identified in the specific topic instructions or associated award document. A courtesy copy of such protests should also be provided to the SBIR STTR Program Manager, LaTracia Price.

(addressed to Don Shires as follows) by obtaining written and dated acknowledgment of receipt from (if mailed letter) Defense Threat Reduction Agency, ATTN: J4CR, Don Shires, 8725 John J Kingman Road, Fort Belvoir, VA 22060-6201. If Federal Express is used for the transmittal, the appropriate address is Defense Threat Reduction Agency, ATTN: J4CR, Don Shires8725 John J Kingman Road, Fort Belvoir, VA 22060-6201.

DTRA - 6

AWARD AND CONTRACT INFORMATION

On average, DTRA received 350 proposals per topic cycle and awards up to 17 - 20 or .06 percent of the received proposals under a topic cycle. For fiscal year 2027, DTRA plans to utilize its Department of War (DoW) SBIR STTR Program budget proportioned to award a number of firm-fixed-price (FFP) Phase I projects by way of Purchase Order (PO) value not to exceed $250,000.00 for a (7) month period of performance with the six months devoted to the research and the final month for the final report, notwithstanding the TABA maximum of $6,500.00 for the entire project. Additionally, DTRA may use the balance of the budgets’ portion to award follow-on Phase II projects, using a definitive cost contract for each award not to exceed $1,500,000 for a duration not to exceed 24-months period of performance, notwithstanding the TABA maximum of $50,000.00 between the combined phase II projects.

ADDITIONAL INFORMATION

The International Traffic in Arms Regulations (ITAR), 22 CFR Parts 120 through 130, and the Export Administration Regulations (EAR), 15 CFR Parts 730 through 799, will apply to all projects with military or dual-use applications that develop beyond fundamental research, which is basic and applied research ordinarily published and shared broadly within the scientific community. More information is available at https://www.pmddtc.state.gov/ddtc_public.

The technology within some DTRA topics is restricted under export control regulations including the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR).

ITAR controls the export and imports of listed defense-related material, technical data and services that provide the United States with a critical military advantage. EAR controls military, dual-use and commercial items not listed on the United States Munitions List or any other export control lists. EAR regulates export-controlled items based on user, country, and purpose. The offeror must ensure that their firm complies with all applicable export control regulations.

NOTE: Export control compliance statements found in these proposal instructions are not meant to be all inclusive. They do not remove any liability from the submitter to comply with applicable ITAR or EAR export control restrictions or from informing the Government of any potential export restriction such as fundamental research and development efforts proceed.

https://www.pmddtc.state.gov/ddtc_public

DTRA - 7

DTRA

SBIR DOW 2027 BAA

Topic Index Release 2

DTR27BZ02-NV001 UAS-based Precision Aim for Device Render Safe in CBRN Environments.

DTR27BZ02-NV002 Remote UAS-based X-Ray for Device Assessment in CBRNE Environments

DTR27BZ02-NV003 Dynamic Sensor-Tasking and Routing System for Subsurface Hazard Detection

DTR27BZ02-NV004 Validation and Verification of Computational Modeling of Human Blast Injury on Battlefield

DTR27BZ02-NV005 Domestic Scalable Growth Of Large-Format Pixelated CZT Crystals For

Advanced Radiation Detection

DTR27BZ02-NV006 Domestic Fabrication Of High-Purity Precursor Materials For Advanced

Radiation Detection Scintillator Crystals

DTRA - 8

DTR27BZ02-NV001 TITLE: UAS-based Precision Aim for Device Render Safe in CBRN Environments

OUSW (R&E) CRITICAL TECHNOLOGY AREA(S): Applied Super Intelligence (ASI)

COMPONENT TECHNOLOGY PRIORITY AREA(S): Trusted AI and Autonomy

PROJECTED CMMC LEVEL REQUIREMENT: Level 1

OBJECTIVE: Develop novel precision-aiming payload capability that can be employed by UAS and operated remotely. Hand-emplaced precision aiming is a common technique used by all militaries and civilian defense forces. Warfighters require the ability to remotely emplace and precisely aim, adjust, and employ disruptor shells against explosive ordnance threats often associated with Chemical or Biological warheads, supporting standoff and remote render-safe operations. The proposed approach should include one or more payloads that can be integrated with one or more Unmanned Aerial Systems (UAS) platforms and be capable of operating in a Chemical, Biological, Radiological, or Nuclear (CBRN) environment.

DESCRIPTION: DTRA is in need of technical innovations associated with warfighting units performing very long range WMD device render-safe missions from a safe distance, outside of potentially CBRN contaminated environments. Explosive Ordinance Disposal (EOD) definitions and terms are commonly used by many nations and exist on the public internet including steps involving EOD detection, identification, field evaluation, render safe, recovery and disposal. Successfully performing stand-off EOD missions with personal positioned away from the contaminated environment requires a payload capable of remotely and accurately aiming via employment of currently fielded EOD disruptors against the explosive ordnance threat with a high degree of precision.

Payload capabilities of the proposed solution should ideally be sized to be compatible with currently fielded Department of War UAS systems. The desired end state is a system weight that is designed for small-unit operations UAS.

DTRA conducts counter WMD science and technology research and testing efforts for Joint Services EOD missions. Ground robotic platforms currently provide the only fielded remote-employment method for EOD disruptors, but these lack terrain-independent access and approach-angle flexibility that an aerial platform would provide. Small unit operations UAS platforms with sufficient flight endurance and payload capacity to carry current EOD-relevant payloads into contested or austere environments. This topic seeks novel approaches to providing precision remote-aiming payloads delivered and emplaced by remote UAS with subsequent operational render safe execution orchestrated from remotely. The capability should be able to be remotely recovered and re-charged to enable system re-use at another location after the render safe mission is completed.

STATE OF TECHNOLOGY:

• Significant technical challenges exist in achieving operational standoff. Standoff is defined as the ability to gather information about, or employ tools against, an explosive ordnance threat at a meaningful physical distance, without the EOD technician or the EOD tool itself needing to be placed directly against or immediately adjacent to the threat.

• The Stand Off objective is a novel precision-aiming render safe capability that can be delivered to a meaningful distance from the threat and still deliver accurate, useful results without requiring direct contact or close-in emplacement against the device itself. In some cases, physically touching or bringing a metal object too close to the device may trigger it’s detonation.

DTRA - 9

• The Remote Objective is defined as the ability to employ Joint Service EOD tools using robotic platforms, hook-and-line techniques, or a combination of tools and techniques without the EOD technician being physically present at the threat site. For example, employing a disruptor via a ground robot so that the technician never approaches the device directly. In an existing CBRNE environment or if the unexploded ordinance is associated with a CBRN warhead, is critical to conduct the mission from a remote location.

• Current EOD disruptor technology is capable of engaging a threat at a distance once it is properly aimed and fired, but current aiming and emplacement methods require the disruptor to be physically positioned and adjusted by hand, meaning an EOD technician must be directly at the tool to set it up correctly. As a result, even though the disruptor’s terminal effect has standoff, the technician does not retain standoff during the aiming and emplacement process itself. Existing remote delivery methods can get a disruptor near a threat, but it remains difficult to finely position and aim it once it arrives.

• Current ground robotic platforms are limited by terrain and access. A threat located on a rooftop, upper floor, or otherwise inaccessible position is simply unreachable by a ground platform, regardless of any aiming capability it might have. Novel aerial delivery capabilities are emerging that could resolve this access constraint by providing rapid ingress and egress over obstacles, terrain, rubble, and structures common to austere and urban environments, along with the ability to approach threat devices from angles and approach paths unavailable to ground robots.

PHASE I: Design a system architecture and conduct an Analysis of Alternatives (AoA) to identify and evaluate candidate remote precision-aiming disruptor payloads against Joint Service EOD operational requirements. Assess mechanical, electrical, and software adaptability and versatility of leading candidates from each technology category, and define the specific engineering interfaces (mechanical mounting, power, control/data links, payload release and re-attachment mechanisms) required to integrate the at least one proposed system. Include in the proposed architecture a proposed method to communicate and control from a remote location, outside and upwind of a potential CBRN contaminated area. If feasible, a visual simulation of the proposed architecture executing an example mission would be helpful.

PHASE II: Construct the engineering integration and prototype effort identified in Phase 1. Construct and bench-test the set of key physical and electronic interfaces using the proposed UAS platform and the selected precision-aiming disruptor payload, including pickup/drop-off release mechanisms, remote aiming control integration, and command-and-control software integration. Demonstrate subsystem functionality in a Government identified controlled test environment.

PHASE III: DUAL USE APPLICATIONS: Revise prototype design based on operational feedback and any testing results during Phase 2. Produce two complete sets of proposed system prototype capability including methods to enable remote command and control. Conduct two integrated field employment and demonstrations of the combined system, in representative austere and in an urban operational environment, the government will provide access to government test ranges and assist in test planning. Demonstrate end-to-end mission execution: aerial transit, precision payload emplacement, remote disruptor aiming and adjustment, and (as an objective capability) payload retrieval/repositioning.

REFERENCES:

1. Naval Surface Warfare Center (NSWC) / Indian Head Division.

https://www.navsea.navy.mil/Home/Warfare-Centers/NSWC-Indian-Head/ https://www.navsea.navy.mil/Home/Warfare-Centers/NSWC-Indian-Head/

DTRA - 10

2. Naval Sea Systems Command (NAVSEA) / Indian Head Division.

https://www.navsea.navy.mil/Home/Warfare-Centers/NSWC-Indian-Head/What-We-Do/

3. U.S. Army Program Executive Office Aviation / Unmanned Aircraft Systems Project Office.

https://www.peoavn.army.mil/ Additional system descriptions and fact sheets are commonly available via Army.mil UAS pages and the official program office releases.

4. Murphy, R. R., Tadokoro, S., & Kleiner, A. (2019). Disaster robotics. In B. Siciliano & O. Khatib (Eds.), Springer Handbook of Robotics (2nd ed., pp. 1577–1604). Springer.

https://doi.org/10.1007/978-3-319-32552-1_60

5. Kruijff-Korbayová, I., M., Ögren, P., Svoboda, T., & Worst, R. (2021). Deployment of ground and aerial robots in earthquake-struck Amatrice, Italy: Lessons learned from a multi-robot system for search and rescue. Journal of Field Robotics, 38(1), 5–31.

6. Delmerico, J., Mintchev, S., Giusti, A., Gromov, B., Melo, K., Tørdal, P., Bachmann, B., et al.

(2019). The current state and future outlook of rescue robotics. Journal of Field Robotics, 36(7), 1171–1191. https://doi.org/10.1002/rob.21887

7. Lee, J., Hwangbo, J., Wellhausen, L., Koltun, V., & Hutter, M. (2020). Learning quadrupedal locomotion over challenging terrain. Science Robotics, 5(47), eabc5986.

8. Lee, D., Ryan, T., & Kim, H. J. (2019). Autonomous landing of a VTOL UAV on a moving platform using image-based visual servoing. IEEE Robotics and Automation Letters, 4(4), 3401– 3408. https://doi.org/10.1109/LRA.2019.2926671

9. Staub, N., Bicego, D., Sablé, Q., & Franchi, A. (2018). Towards a flying assistant paradigm: The OTHex. Proceedings of the IEEE International Conference on Robotics & Automation (ICRA), 6997–7002. https://doi.org/10.1109/ICRA.2018.8460680;

KEYWORDS: Unmanned Aerial System (UAS); Explosive Ordnance Disposal (EOD); Render Safe;

Precision Aiming; Remote Operations; Operational Standoff; Disruptor Payload Integration; CBRN / CBRNE Operations; Trusted Autonomy; Remote Command and Control (C2) https://doi.org/10.1007/978-3-319-32552-1_60 https://doi.org/10.1002/rob.21887 https://doi.org/10.1109/LRA.2019.2926671

DTRA - 11

DTR27BZ02-NV002 TITLE: Remote UAS-based X-Ray for Device Assessment in CBRNE Environments.

OUSW (R&E) CRITICAL TECHNOLOGY AREA(S): Applied Super Intelligence (ASI)

COMPONENT TECHNOLOGY PRIORITY AREA(S): Trusted AI and Autonomy

PROJECTED CMMC LEVEL REQUIREMENT: Level 1

OBJECTIVE: Develop a novel stand-off X-ray capability by integrating appropriate x-ray transmitter and x-ray receiver capabilities into multiple cooperating UAS systems to enable remote threat device imaging capabilities from a safe distance away from potential Chemical, Biological, Radiological, or Nuclear (CBRN) environments.

DESCRIPTION: DTRA is in need of technical innovations associated with Warfighters performing long range WMD device assessment and characterization from a safe distance outside of potentially CBRN contaminated environments. Explosive Ordinance Disposal (EOD) definitions and terms are commonly used by many nations and exist on the public internet including steps involving EOD detection, assessment, identification, field evaluation, render safe, recovery and disposal. Current device assessment is manual, requiring personnel to approach closely and manually move x-ray transmitters and x-ray receivers around an unknown device to perform the required assessment mission. Current stand-off capabilities are typically ground robots manually driven a short distance which may be safe for some unexploded ordinance (UXO), but are not safe for suspected WMD warheads. Recent UAS innovations associated with coaxial form factor systems that can perch or land as part of their mission flight profile appear to offer a novel approach to conducting bi-static x-ray image collection.

STATE OF TECHNOLOGY.

• Current Portable digital radiography systems that depend on hand- or robot-emplacement of a source and flat-panel detector near the device are limited in a CBRN environment. There is no current technology solution that can generate diagnostically useful transmission images (sufficient penetration of ordnance casings plus resolution of fine fuse features such as wires, switches, or delay elements) without any ground contact or personnel entry into the contaminated zone.

• Mobile x-ray transmitters and various options for exposing images, and stitching multiple images together to create a 3-D assessment of an unknown device exist, but they are generally hand-carried and emplaced. Complex mathematics and algorithms for capturing and rendering X-ray results from multiple simultaneously moving transmitters and receivers each with potential uncertainties in position and angle are limited.

• Tactical UAS systems are generally small, carry lighter payloads, do not have open architectures for payloads, and payload options are generally difficult and limited to the bottom side to integrate without adversely affecting flight profiles.

• Robotic x-rays exist but are typically fixed, large and devices are brought to them and put on a turntable. This topic is for x-rays done in the field, at 5km distances, without moving the threat device.

• No UAS-based x-ray capability currently exists.

PHASE I: Design a novel stand-off X-ray capability concept that would integrate portable x-ray transmitter and receiver capabilities into multiple cooperating UAS systems. Create an in silico model of

DTRA - 12

system performance with mathematical assessment of anticipated image quality as a function of time, motion, and navigation uncertainties. A functional transmission X-ray source (high-voltage generation, cooling, radiation shielding) plus a suitable detector must be integrated while preserving flight stability for sharp imaging, supporting open real-time data architectures.

PHASE II: Build one working prototype of proposed system to demonstrate capability to collect data for post-processing at a later date. Prototype design should look to fill persistent and newly heightened technical gaps to include: lightweight, high-flux (preferably pulsed) X-ray sources and detectors suitable for prolonged airborne carriage; robust real-time algorithms for motion-compensated multi-view reconstruction from independently flying platforms; methods to extract fuse-function information from low-signal, limited-angle, or single-pass data; sealed or disposable system architectures that eliminate the need for recovery of contaminated hardware; and practical techniques that achieve usable diagnostic quality at greater effective standoffs while still resolving internal mechanisms without any ground presence.

PHASE III: DUAL USE APPLICATIONS: Extend Phase 2 capabilities to scale performance of missions at multiple sites, allowing for multiple swarming transmitters and/or receivers spread over time and space.

Demonstrate ability to generate integrated X-Ray image results rapidly, on location in near-real-time during or soon after completion of swarming activities.

REFERENCES:

1. Naval Surface Warfare Center (NSWC) / Indian Head Division.

https://www.navsea.navy.mil/Home/Warfare-Centers/NSWC-Indian-Head/

2. Naval Sea Systems Command (NAVSEA) / Indian Head Division.

https://www.navsea.navy.mil/Home/Warfare-Centers/NSWC-Indian-Head/What-We-Do/

3. RAND study “Army Explosive Ordnance Disposal in Large Scale Combat Operations”, Jennifer Lamping Lewis, et. al. 2024. Download at ttp://www.rand.org/t/RRA2078-2

4. Chandra, R., Kaczmarek, J., & Neumann, M. (2025). X-ray image generation for robotic radiography: A case study on motion blur in drone-based wind turbine inspections. Journal of Nondestructive Evaluation, 44(1), Article 12. researchgate.net

5. University of California - Santa Barbara. "X-ray eyes in the sky: Drones and WiFi for 3-D through-wall imaging." ScienceDaily. ScienceDaily, 19 June 2017.

<www.sciencedaily.com/releases/2017/06/170619144830.htm>.

6. Example UAS with modular architecture - Coaxial Spartan NX-30 Ascent UAS, https://www.robinsonheli.com/unmanned/uas/spartan

7. Lee, H., et al. (2024). “A Drone-Driven X-Ray Image-Based Diagnosis of Wind Turbine Blades for Reliable Operation of Wind Turbine.” IEEE Access, 12, 56141–56158. DOI:

10.1109/ACCESS.2024.3388494.

8. Lee, J., et al. (2023). “X-ray image-based flight path planning model of UAVs for non-destructive inspection of wind blades.” ITC-CSCC 2023. DOI: 10.1109/ITC-CSCC58803.2023.10212472.

9. Lee, H., et al. (2025). “Autonomous Drone Flight Using Object Detection in X-Ray Images for Wind Turbine Blade Internal Inspection.” ECAI 2025, pp. 5319–5326. DOI: 10.3233/FAIA251469

10. Meere, B., et al. (2025). “X-ray Image Generation for Robotic Radiography: A Case Study on Motion Blur in Drone-Based Wind Turbine Inspections.” Journal of Nondestructive Evaluation, 44, 139. DOI: 10.1007/s10921-025-01279-6 https://www.navsea.navy.mil/Home/Warfare-Centers/NSWC-Indian-Head/ https://www.robinsonheli.com/unmanned/uas/spartan

DTRA - 13

11. University of North Carolina at Chapel Hill (2020). Mobile and Free-Form X-Ray Imaging Systems and Methods, U.S. Patent 10,539,708.

12. Novel Coaxial UAS, Ascent AeroSystems. Spartan Unmanned Aircraft System (UAS) – System Description and Specifications. Website: https://ascentaerosystems.com/ (product/system pages for the Spartan UAS)

KEYWORDS: Unmanned Aerial System (UAS): Explosive Ordnance Disposal (EOD): Remote Render Safe: Precision Aiming: Operational Standoff: Disruptor Payload: CBRN Environments: Remote Command and Control: Trusted Autonomy: Small-Unit UAS

DTRA - 14

DTR27BZ02-NV003 Title: Dynamic Sensor-Tasking and Routing System for Subsurface Hazard Detection

COMPONENT TECHNOLOGY PRIORITY AREA(S): Trusted AI and Autonomy

PROJECTED CMMC LEVEL REQUIREMENT: Level 1

OBJECTIVE: Develop an explainable, adaptive machine learning architecture using Super Intelligence (SI) that dynamically schedules, sequences, and gates geophysical sensor modalities based on real-time environmental physics, learned sensor operational envelopes, and predictive target response models. The system will enable autonomous platforms to perform in-stride characterization and clearance of subsurface hazards, including potential WMD devices or components, in high-tempo, contested tactical environments.

DESCRIPTION: Current field-deployable capabilities for WMD device and component defeat, route reconnaissance, and sensitive site exploitation have made significant strides in rapid surface-level mapping and visual threat triage using unmanned aerial and ground platforms. However, these operational systems encounter a critical bottleneck when confronting subsurface hazards. Visual, optical, and topographic sensors are fundamentally blind to threats that are partially buried, completely subsurface, or obscured beneath soil, blast debris, or disturbed earth. When subsurface geophysical instruments are integrated onto these unmanned platforms to address this blind spot, current field architecture suffers from a severe "collect everything" bottleneck. Lacking localized intelligence, platforms typically execute static, pre-programmed survey scripts which force sensors to operate continuously and indiscriminately across an entire area. This floods constrained tactical communication networks with massive volumes of raw sensor data, overwhelms field computing devices, drastically slows operational tempo, and results in sensor operational blindness when local soil physics degrade or invalidate specific sensor modalities. When conducting standoff reconnaissance of suspected hazard areas—which may contain buried chemical or biological munitions, radiological dispersal device (RDD) components, bulk precursor storage vessels, or associated explosive triggers and conventional ordnance—these bottlenecks force operators into dangerous, prolonged exposure on target. Furthermore, relying on rigid, static classical logic to manage these complex sensor suites in real time introduces a critical limitation, as traditional rule-based programs cannot adapt to highly dynamic, uncharacterized environments where the boundary conditions are not known beforehand.

A proactive system is required to answer:

"Given this specific environment and mission profile, which sensor should be deployed first, what detection threshold triggers the next modality, and which sensors may be inhibited due to the environment or other physical boundary conditions?"

This topic seeks an adaptive, machine-learning-driven sensor-tasking and routing decision engine capable of scheduling sensor deployment and routing platform payloads in real time using probabilistic, data-driven optimization methods. The primary need is an intelligent edge capability that continuously monitors changing site conditions and dynamically queues, activates, or inhibits physical sensor payloads on an autonomous platform. Rather than streaming raw data or running all sensors simultaneously, the system must govern sensor execution through learned decision policies (utilizing techniques such as reinforcement learning, contextual bandits, or partially observable Markov decision processes) that optimize performance based on sensor-inferred environmental physics (such as electrical conductivity and dielectric permittivity), immediate mission constraints (such as required advance speed, standoff distance requirements, and target priority), and real-time sensor performance signatures. When an initial screening modality detects an anomaly, the engine must evaluate the environmental context to dynamically determine if a secondary, higher-fidelity sensor is required to verify and classify the threat, or if the platform should continue its

DTRA - 15

route. By automating this sensor-queuing and routing logic at the edge through explainable and efficient AI, the system will overcome the subsurface bottlenecks of current field suites, eliminate tactical network saturation, minimize time on target, and ensure reliable detection and defeat of subsurface WMD devices and associated hazards across diverse, uncharacterized operational environments.

State of Technology: Currently deployed military and commercial technologies have reached a high level of maturity in distinct, stove-piped domains, but they do not integrate these capabilities into a single, closed-loop, in-stride subsurface decision engine. The current technical landscape is characterized by the following:

• Standoff Aerial and Surface Visual Mapping Systems: Existing fielded systems utilize unmanned aerial vehicles (UAVs) and ground platforms to perform rapid photogrammetric, optical (EO/IR), and LiDAR mapping of surface terrains. These systems feature mature edge-computing architectures that run real-time automated target recognition (ATR) to classify surface munitions, craters, and obstacles on tactical hand-held tablets in under 30 minutes. However, these systems lack subsurface sensing capability, limiting their ability to detect and characterize hazards that are partially buried, covered by debris, or below the ground surface.

• Geophysical Post-Processing Classification Suites: For subsurface detection, advanced electromagnetic induction (EMI) and ground-penetrating radar (GPR) systems are highly mature and accredited for DoW munitions response. These systems utilize sophisticated physics-based inversion models to extract target polarizability tensors and classify anomalies against standard munitions libraries. However, these software suites are strictly designed for post-processing desktop environments. They are not integrated into real-time, in-stride robotic platforms, and they cannot make autonomous decisions in the field regarding active sensor scheduling.

• Uncoordinated "Collect-Everything" Sensor Payloads: Current multi-sensor ground platforms operate in a fixed, concurrent acquisition mode where all integrated sensors (such as magnetometers, GPR, and EMI) run continuously regardless of whether the local terrain and environment is physically compatible with the sensor. For example, when a platform transitions into wet, highly conductive clay, a ground-penetrating radar (GPR) antenna suffers from severe signal attenuation, rendering the collected data ineffective for its intended detection purpose.

Current systems lack the real-time feedback loops to recognize these environmental changes and limitations then automatically adjust, disable, or redirect sensor payloads. This lack of dynamic management creates a major operational inefficiency, resulting in the collection of highly degraded data that requires excessive post-processing, while unnecessarily consuming onboard battery power, communication bandwidth, and valuable mission time.

• Static Autonomous Path Planning: Existing autonomous ground and aerial navigation algorithms plan paths based on surface traversability, geometric obstacle avoidance, and pre-mapped terrain features. They do not ingest real-time subsurface hazard maps or dynamically adjust their routing, payload dwell times, or sensor modalities based on changing subsurface soil electromagnetic properties or detected anomalies.

• Adaptive AI/ML for Sequential Decision-Making and Path Planning: In adjacent fields such as autonomous warehouse robotics, dynamic network routing, and space domain awareness, machine learning is highly mature for solving complex, real-time sensor scheduling and path-planning

DTRA - 16

challenges. State-of-the-art approaches utilize Deep Reinforcement Learning (DRL) and Contextual Multi-Armed Bandits to train autonomous agents that make optimal sequential decisions under extreme uncertainty. These AI models observe dynamic environmental contexts (e.g., localized obstacle density or changing wireless signal-to-noise ratios), weigh the trade-offs between exploring unknown areas and exploiting known paths, and automatically adjust sensor power cycles or update the platform’s route on-the-fly. However, these advanced decision-making frameworks have not yet been integrated with or trained on subsurface geophysical physics, leaving a critical gap where current autonomous AI agents remain incapable of managing multi-modal subsurface sensor suites.

PHASE I:

Feasibility & Concept Architecture

Demonstrate the technical and operational feasibility of an adaptive, machine-learning-Super Intelligence (SI) driven decision engine for dynamic sensor-tasking and routing. Efforts will focus on identifying the theoretical machine learning models, policy optimization frameworks, and reward structures (e.g., reinforcement learning, contextual bandits, or other decision-making algorithms) governing a representative sensor suite, which may include multiple sensor phenomenology’s to identify representative subsurface and surface hazards, including potential WMD devices or components.

The investigator will develop an Super Intelligence (SI)-based software emulator or conceptual model to evaluate the feasibility of the learned sensor-gating policies and decision rules under varying environmental and mission constraints. Phase I will conclude with a demonstration showing that the adaptive, machine-learning-driven system can successfully execute sensor-gating, anomaly escalation, or vehicle routing to prove a reduction in survey time and data overhead compared to static multi-sensor acquisition.

PHASE II:

Prototype Design & System Integration

Transition the theoretical machine learning models, policy optimization frameworks, and adaptive sensor-gating logic developed in Phase I into a functional software prototype of the decision engine. The investigator will design and program an edge-deployable software package optimized to execute real-time model inference on embedded processors without requiring cloud reachback or high-performance computing resources during operations.

The prototype design and engineering effort will focus on converting Phase I's learned decision models and policy algorithms into robust, real-time software capable of ingesting in-stride environmental feeds and continuously calculating the optimal sensor-tasking sequence at the tactical edge. The investigator will conduct demonstrations using real physical sensor data to verify that the machine-learning-driven decision engine successfully executes the correct sensor-sequencing commands (activating, disabling, or swapping sensor modalities based on physical environmental transitions) and adapts simulated platform routing based on learned, unclassified target-detection thresholds.

PHASE III: DUAL USE APPLICATIONS:

Expanded Testing, Scaling, & Technology Transition

Phase III will scale the testing and validation of the machine-learning-driven software prototype developed in Phase II through larger-scale field demonstrations and expanded evaluations across highly diverse, DTRA - 17 uncharacterized environments. This phase will focus on scaling the system's capabilities by validating the generalization of the trained decision policies against significantly larger, multi-site real-world environmental datasets and conducting testing across larger geographical search areas to ensure the model adapts to novel terrain without requiring real-time retraining. Testing and evaluations should focus on demonstrating the software's execution on representative unmanned ground vehicle (UGV) and unmanned aerial system (UAS) platforms configured with the sensor payloads identified in the previous phases.

The expanded demonstrations will evaluate the SI decision engine's ability to repeatably execute sensor-gating commands and adapt platform routing when encountering a wider array of subsurface hazards and simulated WMD-relevant components under diverse, live-field terrain and soil conditions. This expanded validation will provide the necessary performance data to support future technology transition pathways into DTRA C-WMD technology suites, Joint Service EOD robotic systems, and automated route-reconnaissance and breaching suites to support future engineering requirements. For commercial dual-use, the scaled software will transition to geophysics and environmental remediation contractors conducting UXO clean-up at Formerly Used Defense Sites (FUDS), as well as subsurface utility engineering (SUE) platforms to enable more efficient, rapid subsurface mapping in complex civil environments.

REFERENCES:

1. F. Samadzadegan, F. Qaderi, T. L. Haghighi, A. Toosi, and S. M. Mousavi, “Unmanned Aerial Remote Sensing for Unexploded Ordnance Detection: Concepts, Methods, Current Status and Trends,” Sens Imaging, vol. 26, no. 1, p. 137, Oct. 2025, doi: 10.1007/s11220-025-00668-5.

2. D. R. Glaser, F. Shubitidze, and B. E. Barrowes, “Standoff High-Frequency Electromagnetic Induction Response of Unsaturated Sands: A Tank-Scale Feasibility Study,” Journal of Environmental and Engineering Geophysics, vol. 27, no. 1, pp. 45–51, Mar. 2022, doi:

10.32389/JEEG21-030.

3. M. D. Richardson and M. T. Tuley, “SERDP/ESTCP Munitions Response Program: A Summary of Progress and a Way Forward for Underwater Remediation of Unexploded Ordnance (UXO),” in OCEANS 2022, Hampton Roads, Hampton Roads, VA, USA: IEEE, Oct. 2022, pp. 1–6. doi:

10.1109/OCEANS47191.2022.9977115.

4. D. K. Butler, J. E. Simms, J. S. Furey, and H. H. Bennett, “Review of Magnetic Modeling for UXO and Applications to Small Items and Close Distances,” Journal of Environmental and Engineering Geophysics, vol. 17, no. 2, pp. 53–73, Jun. 2012, doi: 10.2113/JEEG17.2.53.

5. L. Zhou, J. Wu, Q. Wei, W. Shi, and Y. Jin, “Multi-Sensor Scheduling Method Based on Joint Risk Assessment with Variable Weight,” Entropy, vol. 24, no. 9, p. 1315, Sep. 2022, doi:

10.3390/e24091315.

6. S. P. Bragdon, V. H. Truong, M. I. Bishop, and J. L. Clausen, “Leveraging environmental conditions to inform a two-step ATR for buried objects,” in Automatic Target Recognition XXXIII, T. L. Overman, R. I. Hammoud, and A. Mahalanobis, Eds., Orlando, United States: SPIE, Jun.

2023, p. 23. doi: 10.1117/12.2663970.

7. F. Accomando et al., “Advances in Magnetic UAV Sensing: A Comparative Study of the MagNimbus and MagArrow Magnetometers,” Sensors, vol. 25, no. 19, p. 6076, Oct. 2025, doi:

10.3390/s25196076.

8. N. AbuJabal, M. Baziyad, R. Fareh, B. Brahmi, T. Rabie, and M. Bettayeb, “A Comprehensive Study of Recent Path-Planning Techniques in Dynamic Environments for Autonomous Robots,”…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated .