A003_Outside_Hwy.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT 1. CONTRACT ID CODE

N/A

PAGE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE NO. 5. PROJECT NO. (If applicable)

A003 2/18/2014 N/A WY PRA GRTE 10(12), Outside Highway Craighead Hill to Cunningham Cabin

6. ISSUED BY CODE N/A 7. ADMINISTERED BY (If other than Item 6) CODE N/A

Department of Transportation Federal Highway Administration 610 East Fifth Street Vancouver WA 98661-3801

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and Zip Code) 9A. AMENDMENT OF SOLICITATION NO.

X

DTFH70-13-R-00002

9B. DATED (SEE ITEM 11)

01/17/2014

10A. MODIFICATION OF CONTRACT/ORDER NO.

N/A

10B. DATED (SEE ITEM 13)

CODE: N/A FACILITY CODE: N/A N/A

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

| X | The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers (__ ) is extended, ( x ) is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

N/A

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A THIS CHANGE ORDER IS ISSUED PURSUANT TO (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN

ITEM 10A.

N/A

B THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (Such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

N/A

C THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

N/A

D OTHER (Specify type of modification and authority) N/A

E. IMPORTANT: Contractor n/a is not, n/a is required to sign this document and return n/a copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

WY PRA GRTE 10(12), Outside Highway Craighead Hill to Cunningham Cabin

SEE PAGE 2 FOR REVISIONS

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15a. NAME AND TITLE OF SIGNER (Type or print) 15a. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

N/A

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY_________________________________________ BY N/A___________________________ N/A (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITION NOT USABLE

30-105 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

Amendment No. A003, dated 02/18/14 WY PRA GRTE 10(12) Solicitation No. DTFH70-13-R-00002 Outside Highway, Craighead Hill to Cunningham Cabin

REVISIONS ARE AS FOLLOWS:

SPECIAL CONTRACT REQUIREMENTS

Page Section/Table Revision F-48 633.01 Description Adds text F-48 633.02 Material Deletes item F-48 633.04 Supports Adds text F-48 633.05 Panels Adds text F-49 633.06 Delineators and Object Markers Adds text F-50 634.05 Waterborne Traffic Paint (Type B and C) Revises paint quantity G-9 718.05 Aluminum Panels Adds Subsection

ENCLOSURES

Pages:

F-48 through F-50 G-9

F-48

Special Contract Requirements Project: WY PRA GRTE 10(12), Outside Highway, Craighead Hill to Cunningham Cabin

03USC01/28/13

Section 633. — PERMANENT TRAFFIC CONTROL

Description

633.01 Amend as follows:

Add the following:

This work also includes providing and installing snow pole holders and caps.

Delete the text of paragraph four and substitute the following:

Sign posts are designated as wood.

Object marker (Mile) posts are designated as galvanized steel U-Channel posts according to 718.08(b)(1).

Delineator posts are designated as galvanized steel.

Material

633.02 Add the following to the material list:

Steel pipe 717.06

Construction Requirements

633.04 Supports. Add the following:

Fabricate sign supports from wood. Use only 6-inch x 6-inch posts. Field drill all 6-inch x 6-inch posts unless otherwise directed by the CO.

Carefully trim all field cuts or abrasions made in supports after treatment. Dip, soak, spray or apply three brush coats of a copper naphthenate solution prepared in accordance with AWPA M4 to field cuts. Apply only to areas that will not be painted. Apply the preservative in such a manner that it does not drip or spill in the aquatic environment or onto the soil.

Coat sign posts with two coats of “Oxford Brown” solid exterior stain as manufactured by Flood or approved equal. Apply according to manufacturer’s recommendations.

633.05 Panels. Delete the text of the first paragraph and substitute the following:

Provide panels for sign installations conforming to the size and dimensions shown on the plans.

Fabricate panels and mile markers from aluminum. Round all sign corners except for “Stop” signs.

Clean the surface to be painted to remove all oil, grease, dirt, salts and other contaminates with an acetic acid solution. Paint the backside of all sign panels and object markers (including mile posts) with two coats of “Manor Brown” as manufactured by Benjamin Moore or an approved equal. Apply according to manufacturer’s recommendations.

Revised by Amendment A003

F-49

Use type IV retroreflective sheeting for all signs including object markers and mile post panels. Cut panels to size and shape and drill or punch all holes. Make panels flat and free of buckets, wrap, dents, cockles, burrs, and other defects.

633.06 Delineators and Object Markers Add the following:

Object Markers (Type Mile Post):

Verify mile designations for mile post panels in the field prior to ordering. Each object marker, type mile post, item consists of two matching front and back aluminum panels. Mile post panels shall conform to MUTCD D10-3. Maximum panel size is 10 inches by 36 inches. Submit panel size for approval prior to ordering.

Clean the surface to be painted to remove all oil, grease, dirt, salts and other contaminates with an acetic acid solution. Paint the post with two coats of “Manor Brown” as manufactured by Benjamin Moore or an approved equal. Apply according to manufacturer’s recommendations.

Install object markers as directed by the CO. Minimum post embedment depth is 3 feet.

Delineators:

Provide delineators that meet the requirements of WYDOT Standard Type IIA as shown on WYDOT Standard Plan 702-1A. This plan is available at the following website:

http://www.dot.state.wy.us/home/engineering_technical_programs/manuals_publications/standardplans/Standard_Plans.html

Clean the surface to be painted to remove all oil, grease, dirt, salts and other contaminates with an acetic acid solution. Paint the post with two coats of “Manor Brown” as manufactured by Benjamin Moore or an approved equal. Apply according to manufacturer’s recommendations.

Install as directed by the CO.

Snow Pole Holders:

Fabricate snow pole holders and caps (including end crimping and any necessary grinding or polishing) prior to galvanizing. Grind the surfaces of the caps and holders to remove fabrications and seam burrs. Galvanize snow pole holders and caps according to Subsection 717.07 prior to shipment to the project. Ensure the caps fit properly into the holders after galvanization. Caps shall fit snugly but be removable by hand methods.

Paint all scrapes on galvanized surfaces that are through to the base metal with two coats of zinc oxide paint.

633.08 Acceptance. Add the following:

Snow pole holders and associated caps will be evaluated under Subsections 106.02 and 106.03.

Measurement

633.09 Add the following:

Measure each snow pole holder and cap as a system.

F-50

Section 634. — PERMANENT PAVEMENT MARKINGS

Construction Requirements

634.03 General. Add the following:

Current state approved marking materials may be used in lieu of materials specified, when approved by the CO. State approved materials must be equivalent to materials specified. Submit proof of compliance with state specifications at least 7 days before applying pavement markings.

634.05 Waterborne Traffic Paint (Type B and C). Delete the text of the fourth paragraph and substitute the following:

Apply pavement markings with equipment capable of marking three separate centerlines in one pass at the spacing shown in the plans so that single centerline markings are placed on the roadway centerline.

Apply one coat of paint to the following pavement markings: arrow symbol, handicap symbol, stop line, handicap access markings, and snow pole holder markings. Apply pavement markings at a rate of 107 square feet per gallon. Fill in all stencil marks with paint.

For all other pavement markings, spray one coat of paint on the new asphalt pavements or new asphalt surface treatments. Apply pavement marking paint at a rate of 107 square feet per gallon.

G-9

Section 717. — Structural Metal

717.06 Steel Pipe. Add the following:

For snow pole holder applications furnish black steel pipe conforming to ASTM A 53, type F, standard weight class, and plain ends.

03USC04/01/11

Section 718. — TRAFFIC SIGNING AND MARKING MATERIAL

718.05 Aluminum Panels. Delete the text of the second paragraph and substitute the following:

Fabricate temporary panels from 0.080-inch thick aluminum sheets. Fabricate permanent panels from 0.125-inch thick aluminum sheets.

718.14 Waterborne Traffic Paint. Delete the text of this subsection and substitute the following:

(g) Daylight reflectance. (Without glass beads)

(1) White, ASTM E 1347 84% relative to magnesium oxide standard

(2) Yellow, ASTM E 1347 55% relative to magnesium oxide standard

Waterborne paint must meet standards set by any of the following State Departments of Transportation: Montana, or Wyoming.