DSS0238 PID-PACK 20250404 105636.TXT

*** LTC PID Packaging Consolidated Text *** PLEASE SEE GLOSSARY AT THE END OF THE DOCUMENT FOR FULL TEXT OF THE ITEM DESCRIPTION

AND PACKAGING REFERENCE NUMBERS CALLED OUT FOR EACH NSN.

NSN:005236523

RADOME

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:CS240

REFERENCE NUMBER:CS199

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:E0165

REFERENCE NUMBER:ZCLS1

REFERENCE NUMBER:ES357

CRITICAL APPLICATION ITEM

KITSAP COMPOSITES INC 33747 P/N 21659-1

FISICA APPLIED TECHNOLOGIES, INC. 50643 P/N 21659-1

STARWIN INDUSTRIES, LLC 63592 P/N 21659-1

IAW REFERENCE DRAWING NR 50643 PSN-3

REVISION NR E DTD 10/24/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 21608

REVISION NR C DTD 06/25/1975

PART PIECE NUMBER:

IAW REFERENCE QAP 50643 21604

REVISION NR P DTD 05/07/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 21659

REVISION NR F DTD 04/30/1997

PART PIECE NUMBER: 21659-1

IAW REFERENCE DRAWING NR 50643 21999

REVISION NR M DTD 04/19/1990

PART PIECE NUMBER:

PREP FOR DELIVERY

LINE ITEM 00001 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE

WITH ASTM D3951.

NSN:011446445

RADOME

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:ZD080

REFERENCE NUMBER:ZCLS1

REFERENCE NUMBER:RD002

REFERENCE NUMBER:E0165

REFERENCE NUMBER:RQ032

REFERENCE NUMBER:CS240

FISICA APPLIED TECHNOLOGIES, INC. 50643 P/N 21658-2

STARWIN INDUSTRIES, LLC 63592 P/N 21658-2

IAW REFERENCE DRAWING NR 50643 21658

REVISION NR F DTD 07/10/1988

PART PIECE NUMBER: 21658-2

IAW REFERENCE DRAWING NR 50643 22001

REVISION NR C DTD 01/20/1987

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 PSN-3

REVISION NR E DTD 10/24/1988

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 81413 T019313

REVISION NR DTD

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 21608

REVISION NR C DTD 06/25/1975

PART PIECE NUMBER:

IAW REFERENCE QAP 50643 21604

REVISION NR P DTD 05/07/1990

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 21999

REVISION NR M DTD 04/19/1990

LINE ITEM 00002 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

NSN:013373591

RADOME

REFERENCE NUMBER:RP001

REFERENCE NUMBER:RD002

REFERENCE NUMBER:RA001

REFERENCE NUMBER:RQ011

REFERENCE NUMBER:RQ002

REFERENCE NUMBER:CQ045

REFERENCE NUMBER:CS240

REFERENCE NUMBER:ZD025

KITSAP COMPOSITES INC 33747 P/N 41089-1

FISICA APPLIED TECHNOLOGIES, INC. 50643 P/N 41089-1

STARWIN INDUSTRIES, LLC 63592 P/N 41089-1

IAW REFERENCE DRAWING NR 15786 41089

REVISION NR G DTD 05/13/1995

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 42111

REVISION NR A DTD 01/01/1901

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 41071

REVISION NR G DTD

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 41088

REVISION NR C DTD

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 41089

REVISION NR F DTD 01/01/1901

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 41098

REVISION NR A DTD

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 98752 7842282

REVISION NR DTD 02/01/1978

PART PIECE NUMBER:

IAW REFERENCE QAP 50643 41070

REVISION NR G DTD 08/11/1989

PART PIECE NUMBER:

IAW REFERENCE DRAWING NR 50643 41089

REVISION NR L DTD 08/11/2011

LINE ITEM 00003 TYPE OF COVERAGE: DLA DIRECT, CONUS

PKGING DATA-QUP:001

IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,

PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.

IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH

GLOSSARY

PACKAGING TEXT

THE FOLLOWING PARAGRAPH APPLIES TO ALL PACKAGING CALLED OUT IN THIS DOCUMENT:

All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951.

Mark and label all packaging and packing in accordance with MIL-STD-129.

The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order.

PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING

REQUIREMENTS FOR PROCUREMENT

ITEM DESCRIPTION TEXT

REFERENCE NUMBER RP001

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

REFERENCE NUMBER RQ032

RQ032: EXPORT CONTROL OF TECHNICAL DATA

This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.

The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. Instructions for obtaining access to the export-controlled data can be found at:

https://www.dla.mil/Logistics-Operations/Enhanced-Validation/

To be eligible for award, offerors and any sources of supply proposed for use are required to have an approved JCP certification and have been approved by the DLA controlling authority to access export-controlled data managed by DLA. DLA will not delay award in order for an offeror or its supplier to apply for and receive approval by the DLA controlling authority to access the export-controlled data.

REFERENCE NUMBER RD002

RD002, COVERED DEFENSE INFORMATION APPLIES

REFERENCE NUMBER RA001

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS

(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE

DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB

AT:

http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx

FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE

SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE

ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE

APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON

REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

REFERENCE NUMBER RQ011

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

REFERENCE NUMBER CS240

NOTE: THIS IS A RESTRICTED SOURCE ITEM

MANUFACTURED TO THE OEM DRAWING(S) CITED

HEREIN AND AS OF THE DATE OF THIS SOLICITATION

ONLY THE SOURCE(S) CITED BELOW HAS/HAVE BEEN

PREQUALIFIED TO MANUFACTURE THE ITEM.

OFFERS BASED ON SUPPLYING OTHER MANUFACTURER'S

PARTS SHALL BE ACCOMPANIED BY TECHNICAL AND

OTHER DATA SUFFICIENT TO EVALUATE THE ITEM FOR

THE INTENDED APPLICATION AS PER DLAI 3200.1,

ENCL 6. SAID EVALUATION MAY TAKE AN EXTENDED

PERIOD OF TIME AND MAY THEREFORE BE APPLICABLE

TO FUTURE PROCUREMENTS. FINAL APPROVAL AUTHORITY

REST WITH THE GOVERNMENT DESIGN CONTROL

ACTIVITY.

REFERENCE NUMBER CS199

ALTERNATE OFFEROR REQUIREMENTS:

THE FOLLOWING DOCUMENTATION IS REQUIRED IN

ACCORDANCE WITH MIL-T-31000. (A) ALL DRAWINGS

AND SPECIFICATIONS REQUIRED FOR MANUFACTURE.

(B) PROCESS/OPERATION SHEETS WHICH DESCRIBE

IN DETAIL EACH CRITICAL PROCESS AND ASSOCIATED

INSPECTION/ACCEPTANCE CRITERIA. (C)

IDENTIFICATION OF SOURCES WHO WILL PERFORM

CRITICAL PROCESSES/OPERATIONS, INCLUDING

SOURCES OF FORGINGS AND CASTINGS. (D) IF

AVAILABLE COPIES OF PURCHASE ORDERS FROM THE

ITEM. (E) A SHOCK EXTENSION REPORT IN

ACCORDANCE WITH MIL-S-901 AND IN A FORMAT AS

SPECIFIED IN DI-ENVR-80706 IS REQUIRED.

IF THE OEM'S DETAILED DRAWINGS ARE NOT

AVAILABLE, THE OFFEROR MUST SUPPLY AN

ENGINEERING ANALYSIS REPORT WHICH DETAILS HOW

THEIR DRAWINGS WERE DEVELOPED. ADDITIONALLY,

IF REVERSE ENGINEERING WAS USED, THE COMPLETE

PROCEDURE WILL BE REPORTED INCLUDING: NUMBER

OF SAMPLES, METHODS AND MEASURES USED, ALL DATA

COMPILED, RATIONALE FOR DIMENSION TOLERANCE

DEVIATION, AND RATIONALE FOR ACCEPTANCE. THIS

DATA WILL BE FORWARDED TO THE ENGINEERING

SUPPORT ACTIVITY FOR EVALUATION.

REFERENCE NUMBER ZD080

SAMPLING:

THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ

H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE

SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,

STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR

AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF

VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED

ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE

SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER

MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR

PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT

SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT

UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.

REFERENCE NUMBER E0165

THE TECHNICAL DATA CITED IN THIS SOLICITATION IS

NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST

MEET THE REQUIREMENTS OF THE CITED TECHNICAL

DATA IN ADDITION TO THE REQUIREMENTS OF THE

PART NUMBERED ITEM LISTED ON THIS SOLICITATION.

REFERENCE NUMBER ZCLS1

A CLASSIFIED DOCUMENT IS INCLUDED IN THE

TECHNICAL DATA PACKAGE THAT SUPPORTS THIS

MATERIAL. CONTRACT AWARD FOR THIS ITEM IS

LIMITED TO THOSE CONTRACTORS THAT HAVE A

VALID AND CURRENT SECURITY CLASSIFICATION

LEVEL OF "SECRET" PRIOR TO AWARD. UPON AWARD

OF THE CONTRACT, THE CONTRACTING OFFICER WILL

ARRANGE FOR THE SECURE DISTRIBUTION OF THIS

CLASSIFIED DOCUMENT THROUGH THE DATA DISTRIBU-

TION OFFICE, DSCC-VPTC, COLUMBUS, OHIO.

REFERENCE NUMBER ES357

A CLASSIFIED DRAWING FORMS A PART OF THIS

DATA PACKAGE AND WILL BE SUPPLIED UPON REQUEST

AFTER CONTRACT AWARD AND SUBMISSION BY THE

CONTRACTOR OF DD FORM 254. REQUEST SHALL BE

SUBMITTED TO DSCC-VTRD, DRAWING DISTRIBUTION

OFFICE.

REFERENCE NUMBER IP025

IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS

REFERENCE NUMBER RQ002

RQ002: CONFIGURATION CHANGE MANAGEMENT - ENGINEERING CHANGE PROPOSAL

REQUEST FOR VARIANCE (DEVIATION OR WAIVER)

REFERENCE NUMBER CQ045

REFERENCE NUMBER ZD025

MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL

NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT

CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED

UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY

USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED

INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;

AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.

PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS

CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN

A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR

MERCURY COMPOUND. (IAW NAVSEA 5100-003D).