DRESS CAP INSIGNIA PD.pdf

AMSC N/A Page 1 of 2 FSC 8455

INCH-POUND

MIL-DTL-1563/2B

6 January 2014

SUPERSEDING

MIL-DTL-1563/2A

30 April 1997

DETAIL SPECIFICATION SHEET

INSIGNIA, U.S.M.A., SERVICE CAP, UNIFORM

This specification is approved for use by all Departments and Agencies of the Department of Defense

The requirements for acquiring the product described herein shall consist of this specification sheet and the latest issue of MIL-DTL-1563.

MATERIAL: Red Brass 85/15 (UNS Alloy No. C-230)

FINISH: Gold Plated, Matte Finish, Burnished Highlights.

MARKING FOR IDENTIFICATION: Back of Insignia

DIMENSIONS:

HEIGHT (At highest point): 2-13/32 inch (REF) WIDTH (At Widest Point): 2-23/32 inch (REF) THICKNESS (Eagle head): 0.064 inch + 0.005 inch

Source: https://assist.dla.mil -- Downloaded: 2017-10-11T20:01Z Check the source to verify that this is the current version before use.

MIL-DTL-1563/2B

SUGGESTED PACKAGING: Standard Commercial UNIT PACKAGING: One service cap insignia shall be mounted on a 3x3 inch card.

INTERMEDIATE PACKAGING: 50 item per box

PIERCING AND ATTACHING DEVICE:

1. Piercing shall be as indicated.

2. Attaching device shall be two screw posts and thumb nuts located as shown.

NOTE:

The term (REF) refers to measurements taken from the Government furnished hub or die.

CHANGES FROM PREVIOUS ISSUE: Marginal notations are not used in this revision to identify changes with respect to the previous issue due to the extent of the changes.

Custodian: Preparing activity:

Army - IH Army - IH

Review activity: (Project No. 8455-2014-005)

DLA - CT

NOTE: The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at https://assist.dla.mil.

Source: https://assist.dla.mil -- Downloaded: 2017-10-11T20:01Z Check the source to verify that this is the current version before use.

https://assist.dla.mil/