Drawing sets 100_ Drawings Bldg. 2480 (FE-10022-0J) 05-03-2024.pdf

PDF 3 MB Posted Jun 20, 2024

Attached to: Roof Repair Bldg. 2480
Solicitation number: W911SG24B0015
Issued by: Department of the Army Materiel Command Mission and Installation Contracting Command Fort Hood

About this file

Written by GovTribe AI · Jun 20, 2024

This document appears to be a pre-solicitation notice for a federal contract opportunity to provide roof removal and replacement services at Building 2480 at Fort Bliss, Texas.

The contract will be a single firm-fixed-price award to remove the existing TPO roofing system and replace it with a new fully adhered 80 mil TPO roofing system with R-38 insulation and 5/8-inch glass-mat roof board. The work is expected to be completed within 90 days after the notice to proceed. This requirement is set aside 100% for HUBZone small businesses under NAICS code 238160 (Roofing Contractors), with a size standard of $19 million. A pre-bid conference is scheduled for August 1, 2024, and bids are due on or about August 15, 2024. The contracting agency is the Mission and Installation Contracting Command (MICC) at Fort Bliss.

View the file

Other files

File	Type	Posted
100 SOW_FY24_02480_FE 10022 0J_Replace Damaged Roof.pdf	PDF	Jun 20, 2024

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

C A

R R

R O

A D

HAAN ROAD

C A

R R

R O

A D

D P

R T

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

MARK

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

COVER SHEET

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text

FORT BLISS, TEXAS

AutoCAD SHX Text

INDEX OF DRAWINGS

AutoCAD SHX Text

NO.

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

CONCURRENCES

AutoCAD SHX Text

USING AGENCY

AutoCAD SHX Text

FIRE DEPARTMENT

AutoCAD SHX Text

ENVIRONMENTAL DIVISION

AutoCAD SHX Text

PHYSICAL SECURITY OFFICER

AutoCAD SHX Text

ANTI-TERRORISM/FORCE PROTECTION

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

SIGNATURES INDICATE THAT THOSE SIGNING HAVE REVIEWED PROJECT

AutoCAD SHX Text

PLANS AND SPECIFICATIONS AND ARE IN CONCURRENCE WITH THEM.

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DATE

AutoCAD SHX Text

SAFETY OFFICER

AutoCAD SHX Text

DATE

AutoCAD SHX Text

NEC

AutoCAD SHX Text

DATE

AutoCAD SHX Text

MASTER PLANNING DIVISION

AutoCAD SHX Text

DATE

AutoCAD SHX Text

OPERATIONS & MAINTENANCE DIVISION

AutoCAD SHX Text

INDUSTRIAL HYGIENE

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DATE

AutoCAD SHX Text

CHIEF, ENGINEERING SERVICES DIVISION, DPW

AutoCAD SHX Text

CHIEF, DESIGN BRANCH, ESD, DPW

AutoCAD SHX Text

APPROVED BY:

AutoCAD SHX Text

APPROVED BY:

AutoCAD SHX Text

BUILDING 2480 NEW ROOF

AutoCAD SHX Text

PROJECT LOCATION MAP

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text N

AutoCAD SHX Text

PROJECT LOCATION

AutoCAD SHX Text 1 = COVER SHEET 2 = SITE PLAN 3 = DEMOLITION 4 = PROPOSED WORK PLAN 5 = DETAILS 6 = DETAILS

AutoCAD SHX Text A-100

AutoCAD SHX Text

FE 10022 OJ

AutoCAD SHX Text

BUILDING 2480 NEW ROOF

AutoCAD SHX Text 3/21/2024

AutoCAD SHX Text L.M

AutoCAD SHX Text A.F.P.

C A

R R

R O

A D

HAAN ROAD

D P

R T

AutoCAD SHX Text

LAY DOWN AREA

AutoCAD SHX Text

CONSTRUCTION LIMITS

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

MARK

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

EXISTING SITE PLAN

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text A-101

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text

FE 10022 OJ

AutoCAD SHX Text

EXISTING SITE PLAN

AutoCAD SHX Text 1"=50'

AutoCAD SHX Text

BUILDING 2480 ROOF REPAIRS

AutoCAD SHX Text 3/21/2024

AutoCAD SHX Text L.M

AutoCAD SHX Text A.F.P.

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text CONSTRUCTION AREA - CONSTRUCTION AREA TO USE DEMARCATION POINTS SUCH AS FENCING, CURBS, ETC., WHEREVER FEASIBLE UNLESS OTHERWISE NOTED.

AutoCAD SHX Text

1. CONTRACTOR SHALL MAINTAIN AND CLEAN CONSTRUCTION AREA AS CONTRACTOR SHALL MAINTAIN AND CLEAN CONSTRUCTION AREA AS PER CONTRACT AND SAFETY RECOMMENDATIONS. 2. CONTRACTOR SHALL PROVIDE AND FURNISH TRAFFIC CONTROL FOR CONTRACTOR SHALL PROVIDE AND FURNISH TRAFFIC CONTROL FOR AREA ADJACENT TO CONSTRUCTION AREA. CONTRACTOR SHALL CONTRACTOR SHALL PROVIDE ALL REQUIRED TRAFFIC CONTROL PLANS. ALL SIGNS, BARRICADES, CHANNELIZATION DEVICES, SIGN FRAMES AND ERECTION OF SUCH DEVICES SHALL CONFORM TO THE REQUIREMENTS OF THE LOCAL TRAFFIC CONTROL AUTHORITY. 3. CONTRACTOR SHALL PROVIDE BUILDING ACCESS TO USER. CONTRACTOR SHALL PROVIDE BUILDING ACCESS TO USER. 4. CONTRACTOR SHALL PROVIDE VEHICULAR ACCESS TO PARKING CONTRACTOR SHALL PROVIDE VEHICULAR ACCESS TO PARKING SPACES. 5. ALL WORK SHALL COMPLY WITH THE MANUFACTURER'S ALL WORK SHALL COMPLY WITH THE MANUFACTURER'S SPECIFICATIONS/RECOMMENDATIONS, FEDERAL, STATE, AND LOCAL CODES. 6. CONTRACTOR SHALL BE RESPONSIBLE TO MAINTAIN A COMPLETE CONTRACTOR SHALL BE RESPONSIBLE TO MAINTAIN A COMPLETE SET OF CONSTRUCTION DOCUMENTS ON SITE AND INDICATE CHANGES AS THE PROJECT PROGRESSES. 7. NO OBSTRUCTIONS WILL BE PERMITTED WITHIN THREE FEET OF FIRE NO OBSTRUCTIONS WILL BE PERMITTED WITHIN THREE FEET OF FIRE HYDRANTS. 8. ANY DEMOLITION DEBRIS SUSPECTED TO CONTAIN HAZARDOUS ANY DEMOLITION DEBRIS SUSPECTED TO CONTAIN HAZARDOUS MATERIALS, SHALL BE IMMEDIATELY BROUGHT TO THE ATTENTION OF THE CONTRACTING OFFICER REPRESENTATIVE PRIOR TO CONTINUING ANY ADDITIONAL WORK. 9. CONTRACTOR SHALL LIFT IN PLACE EXISTING ELECTRICAL CONDUIT, CONTRACTOR SHALL LIFT IN PLACE EXISTING ELECTRICAL CONDUIT, GAS LINES, WIRES, ETC., AS REQUIRED. 10. CONTRACTOR IS RESPONSIBLE TO PROTECT ALL EXISTING CONTRACTOR IS RESPONSIBLE TO PROTECT ALL EXISTING EQUIPMENT, MATERIALS AND FINISHES THAT ARE TO REMAIN, AND WITHOUT NECESSARY DAMAGE. ANY DAMAGES SHALL BE REPLACED OR RESTORED WITHOUT ADDITIONAL COST TO THE GOVERNMENT. 11. ALL REMOVED EQUIPMENT SHALL BE INSTALLED AND TESTED IN ALL REMOVED EQUIPMENT SHALL BE INSTALLED AND TESTED IN THE PRESENCE OF A CONTRACTING OFFICER REPRESENTATIVE. 12. CONTRACTOR SHALL NOTIFY CONTRACTING OFFICER'S FIELD CONTRACTOR SHALL NOTIFY CONTRACTING OFFICER'S FIELD REPRESENTATIVE IMMEDIATELY OF ANY CONFLICTS DISCOVERED IN THE FIELD TO ALLOW SUFFICIENT TIME TO REVIEW AND RESOLVE THE ISSUE. 13. CONSTRUCTION & DEMOLITION DIVERSION: FORT BLISS REQUIRES CONSTRUCTION & DEMOLITION DIVERSION: FORT BLISS REQUIRES A MINIMUM OF 60% OF CONSTRUCTION AND DEMOLITION MATERIALS AND DEBRIS FROM LANDFILLS. IF THE CONTRACTOR HAS A VALID REASON FOR NOT BEING ABLE TO MEET THIS DIVERSION GOAL, THE CONTRACTOR NEEDS TO PRESENT THEIR REASONING IN WRITING TO DPW-ENVIRONMENTAL DIVISION. 14. CONTRACTOR SHALL FIELD VERIFY ALL DIMENSIONS, EXACT CONTRACTOR SHALL FIELD VERIFY ALL DIMENSIONS, EXACT LOCATIONS AND QUANTITY BEFORE COMMENCING WORK. 15. ANY EXISTING AND\OR NEW GAS LINES EXPOSED ON THE ROOF ANY EXISTING AND\OR NEW GAS LINES EXPOSED ON THE ROOF SHALL BE PRIMED WITH ONE COAT AND PAINTED TWO COATS OF YELLOW.

AutoCAD SHX Text LAY DOWN YARD TO BE SUBMITTED BY CONTRACTOR AND APPROVED BY COR & MASTER PLANNING

DATE

D P

R T

AutoCAD SHX Text

EXISTING ROOF HATCH

AutoCAD SHX Text

EXISTING MECHANICAL UNITS AND DUCT WORK

AutoCAD SHX Text

EXISTING MECHANICAL UNIT AND DUCT WORK TYP.

AutoCAD SHX Text

EXISTING GAS LINE

AutoCAD SHX Text

EXISTING ANTENA

AutoCAD SHX Text

GUTTER AND DOWNSPOUT TO BE REMOVED

AutoCAD SHX Text

DRAIN LINES TO BE REMOVED AND REPLACED

AutoCAD SHX Text

GUTTER AND DOWNSPOUT TO BE REMOVED

AutoCAD SHX Text

EXISTING ELECTRICAL LINE

AutoCAD SHX Text

DRAIN LINES TO BE REMOVED AND REPLACED

AutoCAD SHX Text

DRAIN LINES TO BE REMOVED AND REPLACE

AutoCAD SHX Text

EXISTING WATER LINE

AutoCAD SHX Text

EXISTING WATER LINE

AutoCAD SHX Text

SCRAPE OFF ALL OLD PAINT AND SAND AT ALL SOFFITS

AutoCAD SHX Text

SCRAPE OFF ALL OLD PAINT AND SAND AT ALL SOFFITS

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

MARK

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

DEMOLITION WORK PLAN

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text A-102

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 3/21/2024

AutoCAD SHX Text L.M

AutoCAD SHX Text

DEMOLITION PLAN

AutoCAD SHX Text 1"=10'

AutoCAD SHX Text A.F.P.

AutoCAD SHX Text

BUILDING 2480 NEW ROOF

AutoCAD SHX Text

FE 10022 OJ

AutoCAD SHX Text

REMOVE AND REPLACE EXISTING ROOFING SYSTEM WITH NEW TPO ROOF SYSTEM

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

1. CONTRACTOR SHALL MAINTAIN AND CLEAN CONSTRUCTION AREA AS PER CONTRACTOR SHALL MAINTAIN AND CLEAN CONSTRUCTION AREA AS PER CONTRACT AND SAFETY RECONTAMINATIONS. 2. CONTRACTOR SHALL PROVIDE AND FURNISH TRAFFIC CONTROL FOR AREA CONTRACTOR SHALL PROVIDE AND FURNISH TRAFFIC CONTROL FOR AREA ADJACENT TO CONSTRUCTION AREA. 3. CONTRACTOR SHALL PROVIDE BUILDING ACCESS TO USER. CONTRACTOR SHALL PROVIDE BUILDING ACCESS TO USER. 4. CONTRACTOR SHALL PROVIDE VEHICULAR ACCESS TO PARKING SPACES. CONTRACTOR SHALL PROVIDE VEHICULAR ACCESS TO PARKING SPACES. 5. ALL WORK SHALL COMPLY WITH THE MANUFACTURER'S ALL WORK SHALL COMPLY WITH THE MANUFACTURER'S SPECIFICATIONS/RECOMMENDATIONS, FEDERAL, STATE, AND LOCAL CODES. 6. ALL SURFACES IN CONTACT WITH NEW WORK THAT ARE DAMAGED DUE TO ALL SURFACES IN CONTACT WITH NEW WORK THAT ARE DAMAGED DUE TO NEW WORK IN PROGRESS, SHALL BE PATCHED AND MATCHED AS REQUIRED. 7. EXISTING SITE IMPROVEMENTS DAMAGED BY THE CONTRACTOR SHALL BE EXISTING SITE IMPROVEMENTS DAMAGED BY THE CONTRACTOR SHALL BE REMOVED AND REPLACED BY THE CONTRACTOR AT THE CONTRACTOR'S EXPENSE. 8. GENERAL CONTRACTOR SHALL ASSURE THAT ALL SUB-CONTRACTORS HAVE GENERAL CONTRACTOR SHALL ASSURE THAT ALL SUB-CONTRACTORS HAVE REVIEWED THE ENTIRE SET OF CONSTRUCTION DOCUMENTS, THIS INCLUDES BUT NOT LIMITED TO CONSTRUCTION DRAWINGS, PROJECT MANUAL (SPECIFICATIONS), AMENDMENTS, MODIFICATIONS, AND CHANGE ORDERS. THE CONTRACT IS BASED ON CONSTRUCTION DOCUMENTS AS A WHOLE AND COORDINATION BETWEEN SUBCONTRACTOR IS THE SOLE RESPONSIBILITY OF THE GENERAL CONTRACTOR. 9. CONTRACTOR SHALL BE RESPONSIBLE TO MAINTAIN A COMPLETE SET OF CONTRACTOR SHALL BE RESPONSIBLE TO MAINTAIN A COMPLETE SET OF CONSTRUCTION DOCUMENTS ON SITE AND INDICATE CHANGES AS THE PROJECT PROGRESSES. 10. CONTRACTOR SHALL PROVIDE ALL REQUIRED TRAFFIC CONTROL PLANS. ALL CONTRACTOR SHALL PROVIDE ALL REQUIRED TRAFFIC CONTROL PLANS. ALL SIGNS, BARRICADES, CHANNELIZATION DEVICES, SIGN FRAMES AND ERECTION OF SUCH DEVICES SHALL CONFORM TO THE REQUIREMENTS OF THE LOCAL TRAFFIC CONTROL AUTHORITY. 11. NO OBSTRUCTIONS WILL BE PERMITTED WITHIN THREE FEET OF FIRE NO OBSTRUCTIONS WILL BE PERMITTED WITHIN THREE FEET OF FIRE HYDRANTS. 12. ANY DEMOLITION DEBRIS SUSPECTED TO CONTAIN HAZARDOUS MATERIALS, ANY DEMOLITION DEBRIS SUSPECTED TO CONTAIN HAZARDOUS MATERIALS, SHALL BE IMMEDIATELY BROUGHT TO THE ATTENTION OF THE COR PRIOR TO CONTINUING ANY ADDITIONAL WORK. 13. CONTRACTOR SHALL LIFT IN PLACE EXISTING ELECTRICAL CONDUIT, GAS LINES, CONTRACTOR SHALL LIFT IN PLACE EXISTING ELECTRICAL CONDUIT, GAS LINES, WIRES, ETC., AS REQUIRED. 14. CONTRACTOR IS RESPONSIBLE TO PROTECT ALL EXISTING EQUIPMENT, CONTRACTOR IS RESPONSIBLE TO PROTECT ALL EXISTING EQUIPMENT, MATERIALS AND FINISHES THAT ARE TO REMAIN, AND WITHOUT NECESSARY DAMAGE. ANY DAMAGES SHALL BE REPLACED OR RESTORED WITHOUT ADDITIONAL COST TO THE GOVERNMENT. 15. ALL REMOVED EQUIPMENT SHALL BE INSTALLED AND TESTED IN THE ALL REMOVED EQUIPMENT SHALL BE INSTALLED AND TESTED IN THE PRESENCE OF A GOVERNMENT REPRESENTATIVE. 16. CONTRACTOR SHALL NOTIFY CONTRACTING OFFICER'S FIELD REPRESENTATIVE CONTRACTOR SHALL NOTIFY CONTRACTING OFFICER'S FIELD REPRESENTATIVE IMMEDIATELY OF ANY CONFLICTS DISCOVERED IN THE FIELD TO ALLOW SUFFICIENT TIME TO REVIEW AND RESOLVE THE ISSUE. 17. CONSTRUCTION & DEMOLITION DIVERSION: FORT BLISS REQUIRES A MINIMUM CONSTRUCTION & DEMOLITION DIVERSION: FORT BLISS REQUIRES A MINIMUM OF 60% OF CONSTRUCTION AND DEMOLITION MATERIALS AND DEBRIS FROM LANDFILLS. IF THE CONTRACTOR HAS A VALID REASON FOR NOT BEING ABLE TO MEET THIS DIVERSION GOAL, THE CONTRACTOR NEEDS TO PRESENT THEIR REASONING IN WRITING TO DPW-ENVIRONMENTAL DIVISION. 18. CONTRACTOR SHALL FIELD VERIFY ALL DIMENSIONS, EXACT LOCATIONS AND CONTRACTOR SHALL FIELD VERIFY ALL DIMENSIONS, EXACT LOCATIONS AND QUANTITY BEFORE COMMENCING WORK. 19. CONTRACTOR SHALL PROPERLY SECURE WORKING AREA TO PROTECT CONTRACTOR SHALL PROPERLY SECURE WORKING AREA TO PROTECT EQUIPMENT, VEHICLES, AND PERSONNEL. 20. THESE PLANS ARE FOR REFERENCE ONLY AND MAY NOT REFLECT ALL THESE PLANS ARE FOR REFERENCE ONLY AND MAY NOT REFLECT ALL AVAILABLE INFORMATION, THE EXACT LOCATION AND QUANTITY OF EXISTING DUCTWORK, PIPING AND EQUIPMENT MAY DEVIATE FROM LOCATIONS AND QUANTITY SHOWN ON DRAWINGS. 21. REPLACE DAMAGED NAILERS, SOFFIT, AND FASCIA BOARDING TO MATCH REPLACE DAMAGED NAILERS, SOFFIT, AND FASCIA BOARDING TO MATCH EXISTING MATERIALS. 22. NO NEW MATERIALS SHALL CONTAIN ASBESTOS, LEAD, OR ANY REGULATED NO NEW MATERIALS SHALL CONTAIN ASBESTOS, LEAD, OR ANY REGULATED MATERIALS. 23. ANY ABANDONED PENETRATIONS SHALL BE REMOVED AND THE DECK ANY ABANDONED PENETRATIONS SHALL BE REMOVED AND THE DECK REPAIRED PRIOR TO INSTALLATION OF THE NEW ROOF. 24. ANY EXISTING AND\OR NEW GAS LINES EXPOSED ON THE ROOF SHALL BE ANY EXISTING AND\OR NEW GAS LINES EXPOSED ON THE ROOF SHALL BE PRIMED WITH ONE COAT AND PAINTED TWO COATS OF YELLOW. 25. CONTRACTOR SHALL UTILIZE ALL CONSTRUCTION DOCUMENTS, SCOPE, CONTRACTOR SHALL UTILIZE ALL CONSTRUCTION DOCUMENTS, SCOPE, CONTRACT, SPECIFICATIONS, AND DRAWINGS TO ENSURE ALL CONSTRUCTION, DELIVERABLES, AND RESOURCES ARE DELIVERED TO THE GOVERNMENT.

AutoCAD SHX Text

EXISTING PIPE PENETRATIONS

AutoCAD SHX Text

EXISTING ANTENA

AutoCAD SHX Text

ABANDONED EXHAUST PENETRATIONS TO BE REMOVED

AutoCAD SHX Text

SLOPE

REMOVE AND REPLACE EXISTING GUTTER AND DOWNSPOUTS

R T

AutoCAD SHX Text

EXISTING MECHANICAL UNITS AND DUCT WORK

AutoCAD SHX Text

EXISTING MECHANICAL UNIT AND DUCT WORK TYP.

AutoCAD SHX Text

EXISTING GAS LINE

AutoCAD SHX Text

EXISTING ANTENA

AutoCAD SHX Text

NEW GUTTER AND DOWNSPOUT

AutoCAD SHX Text

NEW DRAIN LINE

AutoCAD SHX Text

NEW GUTTER AND DOWNSPOUT

AutoCAD SHX Text

EXISTING ELECTRICAL LINE

AutoCAD SHX Text

NEW DRAIN LINE

AutoCAD SHX Text

NEW DRAIN LINE

AutoCAD SHX Text

PROVIDE NEW ROOFING SYSTEM

AutoCAD SHX Text

PROVIDE NEW ROOFING SYSTEM

AutoCAD SHX Text

ANCHORS ON ROOF WITH ENGINEER STAMP, PERMANUFACTURER RECOMENDATIONS

AutoCAD SHX Text

ANCHORS ON ROOF WITH ENGINEER STAMP, PERMANUFACTURER RECOMENDATIONS

AutoCAD SHX Text

EXISTING WATER LINE

AutoCAD SHX Text

EXISTING WATER LINE

AutoCAD SHX Text CONTRACTOR WILL PROVIDE ALL NEW ACCESSORIES PIPE SUPPORT, LEAD BOOTS, ECT. CONTRACTOR MUST ACCOUNT FOR MOVING AND ADDING TO UTILITY LINES TO ACCOMMODATE FOR NEW ACCESSORIES. SUPPORTS WILL NOT PENETRATE THE NEW ROOF.

AutoCAD SHX Text

EXISTING ELECTRICAL LINE

AutoCAD SHX Text

EXISTING ROOF HATCH

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

MARK

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

PROPOSED WORK PLAN

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text A-103

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 3/21/2024

AutoCAD SHX Text L.M

AutoCAD SHX Text A.F.P.

AutoCAD SHX Text

LEGEND

AutoCAD SHX Text

GENERAL NOTES

AutoCAD SHX Text

NEW TPO ROOF

AutoCAD SHX Text

EXISTING PIPE PENETRATIONS

AutoCAD SHX Text

EXISTING ANTENA

AutoCAD SHX Text

EXHAUST PENETRATIONS

AutoCAD SHX Text

FE 10022 OJ

AutoCAD SHX Text

PROPOSED PLAN

AutoCAD SHX Text 1/8"= 1'-0"

AutoCAD SHX Text -CONTRACTOR WILL VERIFY ALL DIMENSIONS BEFORE PROVIDING PROPOSAL TO K.O. -BUILDING WILL BE OCCUPIED. CONTRACTOR TO PROVIDE HEATING (OCT 15-APRIL 15) & COOLING (APRIL 15-OCT 15)

AutoCAD SHX Text

BUILDING 2480 NEW ROOF

AutoCAD SHX Text CONTRACTOR TO CAULK AND PREPARE ALL WOOD SOFFIT FOR NEW PRIMER AND PAINT. CONTRACTOR TO PROVIDE 1 COAT OF PRIMER AND 2 COATS OF PAINT SHERWIN WILLIAMS OR EQUAL AT ALL WOOD ITEMS IN PROJECT: SATIN FINISH - COLOR SW TO MATCH EXISTING 1ST COAT: S-W EXTERIOR LATEX WOOD PRIMER, B42W8041 (4.0 MILS WET, 1.4 MILS DRY) 2ND COAT: S-W A-100 EXTERIOR LATEX SATIN, A82 SERIES (4.0 S-W A-100 EXTERIOR LATEX SATIN, A82 SERIES (4.0 MILS WET, 1.5 MILS DRY PER COAT) 3RD COAT: S-W A-100 EXTERIOR LATEX SATIN, A82 SERIES (4.0 S-W A-100 EXTERIOR LATEX SATIN, A82 SERIES (4.0 MILS WET, 1.5 MILS DRY PER COAT)

SLOPE

NOTES:

¾¾

D P

R T

AutoCAD SHX Text

SEALANT (IF REQUIRED FOR THE SPECIFIC SYSTEM)

AutoCAD SHX Text

SHEET-METAL GRAVEL STOP¾ SEE NOTES 3 AND 4

AutoCAD SHX Text

FIELD SHEET EXTENDED BELOW BLOCKING

AutoCAD SHX Text 2 X 6 MIN. WOOD NAILER ATTACHED TO SUBSTRATE¾OVERALL THICKNESS TO OVERALL THICKNESS TO MATCH INSULATION

AutoCAD SHX Text

SELF-ADHERING MEMBRANE FLASHING (EXTEND APPROX. 2'' BEYOND FLANGE)

AutoCAD SHX Text

APPROX. 2''

AutoCAD SHX Text

BONDING ADHESIVE

AutoCAD SHX Text

SEALANT WATER BLOCK

AutoCAD SHX Text REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ALTERNATIVE BASE SECUREMENT OPTIONS.

AutoCAD SHX Text REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING MANUAL: ARCHITECTURAL METAL FLASHING, CONDENSATION AND AIR LEAKAGE CONTROL, AND REROOFING FOR DESIGN, JOINERY AND SECUREMENT OPTIONS FOR GRAVEL STOPS.

AutoCAD SHX Text REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text REFER TO MANUFACTURERS' SPECIFICATIONS FOR SPECIFIC REQUIREMENTS FOR BASE MEMBRANE ATTACHMENT AND PLACEMENT. MECHANICALLY ATTACHED SYSTEMS GENERALLY HAVE SPECIFIC ATTACHMENT REQUIREMENTS FOR PERIMETER LOCATIONS.

AutoCAD SHX Text

PERIMETER EDGE- METAL FLASHING¾ SEE NOTES 3 AND 4

AutoCAD SHX Text

SEALANT (IF REQUIRED FOR THE SPECIFIC SYSTEM)

AutoCAD SHX Text

FIELD SHEET EXTENDED BELOW BLOCKING

AutoCAD SHX Text 2 X 6 MIN. WOOD NAILER ATTACHED TO SUBSTRATE¾ OVERALL THICKNESS TO MATCH INSULATION

AutoCAD SHX Text

SELF-ADHERING MEMBRANE FLASHING

AutoCAD SHX Text

APPROX. 2''

AutoCAD SHX Text

OPTIONAL: WOOD NAILER AND SHEET-METAL CLOSURE

AutoCAD SHX Text

BONDING ADHESIVE

AutoCAD SHX Text

SEALANT WATER BLOCK

AutoCAD SHX Text REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ALTERNATIVE BASE SECUREMENT OPTIONS.

AutoCAD SHX Text REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text 1.

AutoCAD SHX Text 4.

AutoCAD SHX Text 2.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text 3.

AutoCAD SHX Text

SEAM PLATES AND FASTENERS¾ SEE NOTE 2

AutoCAD SHX Text

SEALANT (IF REQUIRED FOR THE SPECIFIC SYSTEM)

AutoCAD SHX Text

INSTALL COMPATIBLE SEALANT OR TAPE BEHIND MEMBRANE

AutoCAD SHX Text

TERMINATION BAR FASTENED WITH APPROPRIATE FASTENERS APPROX. 12'' O.C.

AutoCAD SHX Text

INSTALL COMPRESSIBLE ELASTOMERIC SEALANT OR TAPE TO SPAN IRREGULARITIES

AutoCAD SHX Text

SHEET-METAL COUNTERFLASHING¾ SEE NOTES 3 AND 4

AutoCAD SHX Text INSTALL APPROPRIATE SEALANT (E.G., POLYURETHANE) AND TOOL TO FACILITATE WATER RUNOFF

AutoCAD SHX Text

CONCRETE FASTENERS

AutoCAD SHX Text

8'' MINIMUM

AutoCAD SHX Text

FLASHING HEIGHT

AutoCAD SHX Text

ADHERED MEMBRANE FLASHING

AutoCAD SHX Text

BONDING ADHESIVE

AutoCAD SHX Text

HOT-AIR-WELDED SEAM

AutoCAD SHX Text

1. THIS DETAIL DOES NOT ALLOW FOR DIFFERENTIAL MOVEMENT BETWEEN THE DECK AND WALL. THIS DETAIL DOES NOT ALLOW FOR DIFFERENTIAL MOVEMENT BETWEEN THE DECK AND WALL. 2. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ALTERNATIVE BASE REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ALTERNATIVE BASE SECUREMENT OPTIONS. 3. REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING MANUAL: ARCHITECTURAL REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING MANUAL: ARCHITECTURAL METAL FLASHING, CONDENSATION AND AIR LEAKAGE CONTROL, AND REROOFING FOR DESIGN, JOINERY AND SECUREMENT OPTIONS FOR COUNTERFLASHINGS. 4. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

CONCRETE

AutoCAD SHX Text 2 x 6 MIN. WOOD NAILER ATTACHED TO SUBSTRATE¾ OVERALL THICKNESS TO MATCH INSULATION

AutoCAD SHX Text

TOP OF CURB TO DRAIN TO ONE SIDE

AutoCAD SHX Text

COMPRESSIBLE INSULATION

AutoCAD SHX Text

FLEXIBLE LINER TO SERVE AS INSULATION RETAINER (ATTACHED TO TOP OF CURB)

AutoCAD SHX Text

FLASHING HEIGHT

AutoCAD SHX Text

8'' MINIMUM

AutoCAD SHX Text

ON LOW SIDE

AutoCAD SHX Text

SEAM PLATES AND FASTENERS¾SEE NOTE 3SEE NOTE 3

AutoCAD SHX Text

SEALANT (IF REQUIRED FOR THE SPECIFIC SYSTEM)

AutoCAD SHX Text

ADHERED MEMBRANE FLASHING

AutoCAD SHX Text

FLEXIBLE WEATHERPROOF MEMBRANE CLOSURE

AutoCAD SHX Text

SHEET-METAL EXPANSION JOINT COVER WITH T-TYPE CLEAT¾ SEE NOTES 4 AND 5

AutoCAD SHX Text

SLOPE

AutoCAD SHX Text

HOT-AIR-WELDED SEAM

AutoCAD SHX Text

BONDING ADHESIVE

AutoCAD SHX Text

1. THIS DETAIL ALLOWS FOR BUILDING MOVEMENT IN MULTIPLE DIRECTIONS. THIS DETAIL ALLOWS FOR BUILDING MOVEMENT IN MULTIPLE DIRECTIONS. 2. FLASHING REQUIREMENTS ARE TYPICAL FOR BOTH SIDES OF THE EXPANSION JOINT. FLASHING REQUIREMENTS ARE TYPICAL FOR BOTH SIDES OF THE EXPANSION JOINT. 3. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ALTERNATIVE BASE REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ALTERNATIVE BASE SECUREMENT OPTIONS. 4. REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING MANUAL: REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING MANUAL: ARCHITECTURAL METAL FLASHING, CONDENSATION AND AIR LEAKAGE CONTROL, AND REROOFING FOR DESIGN, JOINERY AND SECUREMENT OPTIONS FOR EXPANSION JOINT COVERS. 5. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

PREMANUFACTURED EXPANSION JOINT COVER

AutoCAD SHX Text

OPTION

AutoCAD SHX Text

WOOD NAILER

AutoCAD SHX Text

PREFABRICATED METAL CURB

AutoCAD SHX Text 2 X 6 MIN. WOOD NAILER ATTACHED TO SUBSTRATE¾OVERALL OVERALL THICKNESS TO MATCH INSULATION

AutoCAD SHX Text

SEAM PLATES AND FASTENERS¾SEE NOTE 5SEE NOTE 5

AutoCAD SHX Text

FLASHING HEIGHT

AutoCAD SHX Text

8'' MINIMUM

AutoCAD SHX Text

SEALANT (IF REQUIRED FOR THE SPECIFIC SYSTEM)

AutoCAD SHX Text

BONDING ADHESIVE

AutoCAD SHX Text

HOT-AIR-WELDED SEAM

AutoCAD SHX Text

ROOFTOP EQUIPMENT FRAME

AutoCAD SHX Text

SEALING MATERIAL¾MUST MUST BE CONTINUOUS ON TOP OF THE CURB

AutoCAD SHX Text

OPTIONAL

AutoCAD SHX Text

ROOF MEMBRANE

AutoCAD SHX Text

INSULATION

AutoCAD SHX Text

RAISED CURB

AutoCAD SHX Text

BASE OF UNIT EXTENDS 1/2'' MINIMUM BEYOND TOP OF CURB

AutoCAD SHX Text

FASTENERS

AutoCAD SHX Text

COUNTERFLASHING

AutoCAD SHX Text

WOOD NAILER

AutoCAD SHX Text

FLASHING RECEIVER

AutoCAD SHX Text

1'' MINIMUM BELOW TOP OF CURB

AutoCAD SHX Text

MECHANICAL UNIT, HOOD, ETC.

AutoCAD SHX Text

REMOVABLE SHEET-METAL COUNTERFLASHING¾ SEE NOTES 6 AND 7

AutoCAD SHX Text

GASKETED FASTENERS¾MIN. MIN. TWO FASTENERS PER SIDE

AutoCAD SHX Text

ADHERED MEMBRANE FLASHING

AutoCAD SHX Text

PREFABRICATED CORNER FLASHING PIECE AT EACH CORNER

AutoCAD SHX Text

FASTENERS APPROX. 8" O.C., MIN. TWO PER SIDE

AutoCAD SHX Text

OPTION A: CURB-BEARING LOCATION FOR HEAVYWEIGHT- LOADING CONDITIONS

AutoCAD SHX Text

OPTION B: CURB-BEARING LOCATION FOR TYPICAL LOADING CONDITIONS

AutoCAD SHX Text

1. THE CURBS, TOP WOOD NAILER AND SEAL STRIP ARE TO BE SUPPLIED BY THE THE CURBS, TOP WOOD NAILER AND SEAL STRIP ARE TO BE SUPPLIED BY THE CURB MANUFACTURER. 2. WHEN POSSIBLE, THE MECHANICAL UNITS SHOULD NOT BE SET UNTIL THE ROOF WHEN POSSIBLE, THE MECHANICAL UNITS SHOULD NOT BE SET UNTIL THE ROOF MEMBRANE AND FLASHING HAVE BEEN INSTALLED. 3. WHERE THE SKYLIGHT, SCUTTLE OR SMOKE VENT FRAME OVERLAPS THE BASE WHERE THE SKYLIGHT, SCUTTLE OR SMOKE VENT FRAME OVERLAPS THE BASE FLASHING AT LEAST 3 INCHES, THE REMOVABLE SHEET-METAL COUNTERFLASHING IS NOT REQUIRED. 4. NRCA RECOMMENDS DESIGNERS CONSIDER PERMANENT INTERNAL OR EXTERNAL NRCA RECOMMENDS DESIGNERS CONSIDER PERMANENT INTERNAL OR EXTERNAL FALL-PROTECTION DEVICES AT ALL SKYLIGHTS. 5. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ALTERNATIVE BASE SECUREMENT OPTIONS. 6. REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING MANUAL: ARCHITECTURAL METAL FLASHING, CONDENSATION AND AIR LEAKAGE CONTROL, AND REROOFING FOR DESIGN, JOINERY AND SECUREMENT OPTIONS FOR COUNTERFLASHINGS. 7. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

SEALING MATERIAL

AutoCAD SHX Text

SEAM PLATES AND FASTENERS¾SEE NOTE 5SEE NOTE 5

AutoCAD SHX Text

WOOD CURB

AutoCAD SHX Text 2 X 6 MIN. WOOD NAILER ATTACHED TO SUBSTRATE¾OVERALL OVERALL THICKNESS TO MATCH INSULATION

AutoCAD SHX Text

FLASHING HEIGHT

AutoCAD SHX Text

8'' MINIMUM

AutoCAD SHX Text

HOT-AIR-WELDED SEAM

AutoCAD SHX Text

BONDING ADHESIVE

AutoCAD SHX Text

SEALANT (IF REQUIRED FOR THE SPECIFIC SYSTEM)

AutoCAD SHX Text

GASKETED FASTENERS¾MIN. MIN. TWO FASTENERS PER SIDE

AutoCAD SHX Text

ROOFTOP EQUIPMENT FRAME

AutoCAD SHX Text

SECTION

AutoCAD SHX Text

FLASHING MEMBRANE

AutoCAD SHX Text

WOOD CURB

AutoCAD SHX Text

FLASHING RECEIVER

AutoCAD SHX Text

1'' MINIMUM BELOW TOP OF CURB

AutoCAD SHX Text

SEALING MATERIAL¾ MUST BE CONTINUOUS ON TOP OF THE CURB

AutoCAD SHX Text

FASTENERS

AutoCAD SHX Text

COUNTERFLASHING

AutoCAD SHX Text

BASE OF UNIT EXTENDS 1/2'' MINIMUM BEYOND TOP OF CURB

AutoCAD SHX Text

MECHANICAL UNIT, HOOD, ETC.

AutoCAD SHX Text

SHEET-METAL RECEIVER WITH REMOVABLE COUNTERFLASHING¾ SEE NOTES 6 AND 7

AutoCAD SHX Text

ADHERED MEMBRANE FLASHING

AutoCAD SHX Text

PREFABRICATED CORNER FLASHING PIECE AT EACH CORNER

AutoCAD SHX Text

1. THE CURBS, TOP WOOD NAILER AND SEAL STRIP ARE TO BE SUPPLIED BY THE CURBS, TOP WOOD NAILER AND SEAL STRIP ARE TO BE SUPPLIED BY THE CURB MANUFACTURER. 2. WHEN POSSIBLE, THE MECHANICAL UNITS SHOULD NOT BE SET UNTIL THE WHEN POSSIBLE, THE MECHANICAL UNITS SHOULD NOT BE SET UNTIL THE ROOF MEMBRANE AND FLASHING HAVE BEEN INSTALLED. 3. WHERE THE SKYLIGHT, SCUTTLE OR SMOKE VENT FRAME OVERLAPS THE BASE WHERE THE SKYLIGHT, SCUTTLE OR SMOKE VENT FRAME OVERLAPS THE BASE FLASHING AT LEAST 3 INCHES, THE REMOVABLE SHEET-METAL COUNTER FLASHING IS NOT REQUIRED. 4. NRCA RECOMMENDS DESIGNERS CONSIDER PERMANENT INTERNAL OR NRCA RECOMMENDS DESIGNERS CONSIDER PERMANENT INTERNAL OR EXTERNAL FALL-PROTECTION DEVICES AT ALL SKYLIGHTS. 5. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ALTERNATIVE BASE SECUREMENT OPTIONS. 6. REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING MANUAL: ARCHITECTURAL METAL FLASHING, CONDENSATION AND AIR LEAKAGE CONTROL, AND RE-ROOFING FOR DESIGN, JOINERY AND SECUREMENT OPTIONS FOR COUNTER FLASHINGS. 7. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

MARK

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

DETAILS

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text A-104

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 3/21/2024

AutoCAD SHX Text L.M

AutoCAD SHX Text A.F.P.

AutoCAD SHX Text

EMBEDED EDGE METAL FLASHING (GRAVEL STOP)

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

DRAINING PERIMETER EDGE METAL

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

BAS FLASHING WITH SURFACE-MOUNTED COUNTER FLASHING AT CONCRETE WALL

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

BASE FLASHING AT EXPANSION JOINT WITH METAL COVER

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

BASE FLASHING AT PRE-FABRICATED METAL CURB

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

BASE FLASHING AT WOOD CURB

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

FE 10022 OJ

BUILDING 2480 NEW ROOF

8' ' M

U M

G H

H T

NOTES:

R T

AutoCAD SHX Text

SEE EPDM-9 FOR CURB FLASHING

AutoCAD SHX Text REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text THIS DETAIL IS DESIGNED TO ELIMINATE ROOF DAMAGE DUE TO EXPANSION AND CONTRACTION OF PIPES. PIPE SUPPORT PROFILES VARY.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

SET FASTENERS IN SEALANT

AutoCAD SHX Text

PIPE SUPPORT¾ PROFILES VARY

AutoCAD SHX Text GUTTER BRACKETS ARE RECOMMENDED TO BE AT LEAST ONE GAUGE HEAVIER THAN GUTTER STOCK.

AutoCAD SHX Text IN CLIMATES WHERE THE WINTER TEMPERATURE REMAINS BELOW FREEZING FOR EXTENDED PERIODS OF TIME, NRCA SUGGESTS INTERIOR DRAINS TO DRAIN THE ROOF.

AutoCAD SHX Text

ON BALLASTED SYSTEMS, A DRAINAGE BAR TO RETAIN BALLAST IS REQUIRED.

AutoCAD SHX Text

SEALANT WATER BLOCK

AutoCAD SHX Text 2 X 6 MIN. WOOD NAILER ATTACHED TO SUBSTRATE¾ OVERALL THICKNESS TO MATCH INSULATION

AutoCAD SHX Text SHEET-METAL GUTTER¾THE FRONT OF THE GUTTER THE FRONT OF THE GUTTER SHOULD BE A MIN. 1'' LOWER THAN THE BACK TO ALLOW OVERFLOW. SEE THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING MANUAL: ARCHITECTURAL METAL FLASHING, CONDENSATION AND AIR LEAKAGE CONTROL, AND REROOFING FOR OTHER GUTTER SHAPES.

AutoCAD SHX Text

OPTIONAL: GUTTER BRACKET SUPPORT

AutoCAD SHX Text

OPTIONAL: STIFFENING BAR

AutoCAD SHX Text

SEALANT (IF REQUIRED FOR THE SPECIFIC SYSTEM)

AutoCAD SHX Text

ADHERED MEMBRANE FLASHING

AutoCAD SHX Text

SHEET-METAL EDGE FLASHING¾ SEE NOTES 5 AND 6

AutoCAD SHX Text

GUTTER SPACERS INSTALLED BETWEEN GUTTER BRACKETS

AutoCAD SHX Text

BONDING ADHESIVE

AutoCAD SHX Text

FIELD SHEET OR SEPARATE MEMBRANE SHEET EXTENDED BELOW BLOCKING

AutoCAD SHX Text REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

APPROX. 2'' (TYP.)

AutoCAD SHX Text REFER TO MANUFACTURERS' SPECIFICATIONS FOR SPECIFIC REQUIREMENTS FOR BASE MEMBRANE ATTACHMENT AND PLACEMENT. MECHANICALLY ATTACHED SYSTEMS GENERALLY REQUIRE SPECIFIC ATTACHMENT REQUIREMENTS FOR PERIMETER LOCATIONS.

AutoCAD SHX Text

PREMANUFACTURED MEMBRANE FLASHING

AutoCAD SHX Text INSTALL SEALANT OR SEALANT TAPE BETWEEN PIPE AND PREMANUFACTURED MEMBRANE FLASHING

AutoCAD SHX Text

PLUMBING VENT STACK

AutoCAD SHX Text

DRAWBAND

AutoCAD SHX Text

SEALANT

AutoCAD SHX Text

HOT-AIR-WELDED SEAM

AutoCAD SHX Text

1. VENT STACKS AND OTHER PIPES SHOULD HAVE A MINIMUM OF 12 INCHES OF CLEARANCE ON ALL VENT STACKS AND OTHER PIPES SHOULD HAVE A MINIMUM OF 12 INCHES OF CLEARANCE ON ALL SIDES FROM WALLS, CURBS AND OTHER PROJECTIONS TO FACILITATE PROPER FLASHING. SEE THE INTRODUCTION TO THE CONSTRUCTION DETAILS FOR ADDITIONAL INFORMATION. 2. NRCA RECOMMENDS FLASHING BE 8 INCHES HIGH; HOWEVER, NRCA IS AWARE PRE-MANUFACTURED NRCA RECOMMENDS FLASHING BE 8 INCHES HIGH; HOWEVER, NRCA IS AWARE PRE-MANUFACTURED BOOT FLASHING GENERALLY WILL NOT MEET THE HEIGHT REQUIREMENT. 3. REFER TO MANUFACTURERS' SPECIFICATIONS FOR SPECIFIC REQUIREMENTS FOR BASE MEMBRANE REFER TO MANUFACTURERS' SPECIFICATIONS FOR SPECIFIC REQUIREMENTS FOR BASE MEMBRANE ATTACHMENT AND PLACEMENT. MECHANICALLY ATTACHED SYSTEMS GENERALLY HAVE SPECIFIC ATTACHMENT REQUIREMENTS FOR PENETRATION LOCATIONS. 4. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

BASE MEMBRANE ATTACHMENT AS REQUIRED FOR SPECIFIC SYSTEM¾ SEE NOTE 3

AutoCAD SHX Text

SEALANT (IF REQUIRED FOR THE SPECIFIC SYSTEM)

AutoCAD SHX Text

MEMBRANE-COATED METAL PENETRATION POCKET¾ SEE NOTES 3 AND 4

AutoCAD SHX Text

NONSHRINK GROUT

AutoCAD SHX Text

HOT-AIR-WELDED MEMBRANE FLASHING

AutoCAD SHX Text OPTIONAL: WEATHERPROOF SHEET-METAL RAIN COLLAR OVERLAPPING PENETRATION POCKET WITH APPROPRIATE SEALANT (E.G., POLYURETHANE)

AutoCAD SHX Text

HOT-AIR-WELDED SEAM

AutoCAD SHX Text

VERIFY DEPTH WITH SEALANT MANUFACTURER

AutoCAD SHX Text

1. PENETRATION POCKETS ARE NOT THE PREFERRED FLASHING METHOD AT PENETRATIONS PENETRATION POCKETS ARE NOT THE PREFERRED FLASHING METHOD AT PENETRATIONS BECAUSE THEY MAY BE A MAINTENANCE PROBLEM. 2. REFER TO MANUFACTURERS' SPECIFICATIONS FOR SPECIFIC REQUIREMENTS FOR BASE REFER TO MANUFACTURERS' SPECIFICATIONS FOR SPECIFIC REQUIREMENTS FOR BASE MEMBRANE ATTACHMENT AND PLACEMENT. MECHANICALLY ATTACHED SYSTEMS GENERALLY HAVE SPECIFIC ATTACHMENT REQUIREMENTS AT PENETRATION LOCATIONS. 3. REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING REFER TO THE ARCHITECTURAL METAL FLASHING SECTION OF THE NRCA ROOFING MANUAL: ARCHITECTURAL METAL FLASHING, CONDENSATION AND AIR LEAKAGE CONTROL, AND REROOFING FOR DESIGN, JOINERY AND SECUREMENT OPTIONS FOR PENETRATION POCKETS. 4. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

CROWN POURABLE SEALANT

AutoCAD SHX Text

MEMBRANE PROTECTION PLY ADHERED TO ROOF MEMBRANE

AutoCAD SHX Text

PIPE SUPPORT SET IN SEALANT - SEE NOTE 2- SEE NOTE 2SEE NOTE 2

AutoCAD SHX Text

NOTES:

AutoCAD SHX Text

1. THIS DETAIL IS DESIGNED TO ELIMINATE ROOF DAMAGE DUE TO EXPANSION AND THIS DETAIL IS DESIGNED TO ELIMINATE ROOF DAMAGE DUE TO EXPANSION AND CONTRACTION OF PIPES. 2. PIPE SUPPORT PROFILES VARY. REFER TO THE MANUFACTURER FOR LOAD CAPACITY PIPE SUPPORT PROFILES VARY. REFER TO THE MANUFACTURER FOR LOAD CAPACITY AND RECOMMENDED SPACING OF SUPPORTS. 3. REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL REFER TO THE INTRODUCTION OF THE CONSTRUCTION DETAILS CHAPTER FOR ADDITIONAL INFORMATION.

AutoCAD SHX Text

REVIEWED BY:

AutoCAD SHX Text

DRAWN BY:

AutoCAD SHX Text

SCALE:

AutoCAD SHX Text

SPEC. #

AutoCAD SHX Text W.O. #

AutoCAD SHX Text

DATE:

AutoCAD SHX Text

NUMBER:

AutoCAD SHX Text

SHEET

AutoCAD SHX Text

DESCRIPTION

AutoCAD SHX Text

MARK

AutoCAD SHX Text

DATE

AutoCAD SHX Text

DIRECTORATE OF PUBLIC WORKS FORT BLISS, TEXAS

AutoCAD SHX Text

DETAILS

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text A-105

AutoCAD SHX Text

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AS SHOWN

AutoCAD SHX Text 3/21/2024

AutoCAD SHX Text L.M

AutoCAD SHX Text A.F.P.

AutoCAD SHX Text

PLUMBING VENT (PREMANUFACTURED BOOT)

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

PIPE SUPPORT CURB

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

PIPE SUPPORT

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

GUTTER WITH PERIMETER EDGE METAL

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

MEMBRANE-COATED METAL-PENETRATIONPOCKET_DOUBLE PENETRATION

AutoCAD SHX Text N.T.S.

AutoCAD SHX Text

FE 10022 OJ

BUILDING 2480 NEW ROOF

Sheets and Views

Bldg.2480 03-08-2023-COVER

Bldg.2480 03-08-2023-EXISTING

Bldg.2480 03-08-2023-DEMO

Bldg.2480 03-08-2023-PROPOSED

Bldg.2480 03-08-2023-DETAILS

Bldg.2480 03-08-2023-DETAILS (2)

File details come from the government source that posted it. Updated Jun 20, 2024.