DRAFTFlowserveMICLvL1SOW.docx
DOCX document 18 KB Posted
- Attached to
- Two (2) MS-V-1 Large Steam Valves Federal contract opportunity
- Solicitation number
- N6449820R0001
About this file
This statement of work outlines engineering and manufacturing services required from Flowserve Corporation to complete two MS-V-1 large steam valves with Material Identification and Control Level 1 certification. The Naval Surface Warfare Center Philadelphia Division will provide funding for Flowserve to deliver the valves meant for use in the LHD-1 Class main propulsion steam plant. Flowserve must perform all necessary engineering, testing, verification and quality assurance requirements to certify the valves according to applicable Navy standards and technical documentation. Work will take place at Flowserve's facility, with no travel required.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
STATEMENT OF WORK
A. TITLE
Purchase engineering and manufacturing services from Flowserve Corporation to complete two (2) MS-V-1 Large Steam Valves with Material Identification and Control (MIC) Level 1 Certification for the LHD-1 Class as part of the Navy’s 2SCOG Steam Critical Spare Program.
1.0 INTRODUCTION
1.0.1 The Naval Surface Warfare Center Philadelphia Division (NSWCPD) is a Department of Defense entity responsible for research and development, test and evaluation, engineering and fleet support organization for the Navy’s ships, submarines, military watercraft and unmanned vehicles. This requirement is for NSWCPD Code 41, which is responsible for in-service engineering support, life cycle management, and testing and evaluation for main propulsion steam systems, secondary steam systems, and auxiliary machinery.
1.0.2 This contract is for non-personal services. It does not create employment rights with the U.S. Government whether actual, inherent, or implied.
1.0.3 Government / Contractor Relationship
(a) The services to be delivered under this Contract are non-personal services and the parties recognize and agree that no employer-employee relationship exists or will exist under the Contract between the Government and the Contractor's personnel. Therefore, it is in the best interest of the Government to provide both parties a full understanding of their respective obligations.
(b) The Contractor employees shall identify themselves as Contractor personnel by introducing themselves or being introduced as Contractor personnel and displaying distinguishable badges or other visible identification for meetings with Government personnel. In addition, Contractor personnel shall appropriately identify themselves as Contractor employees in telephone conversations and in formal and informal written correspondence
(c) Contractor personnel under this Contract shall not engage in any of the inherently governmental functions listed at FAR Subpart 7.5 or DFARS Subpart 207.5.
(d) Employee Relationship:
| 1) | The services to be performed under this Contract do not require the Contractor or its personnel to exercise personal judgment and discretion on behalf of the Government. Rather the Contractor's personnel will act and exercise personal judgment and discretion on behalf of the Contractor. |
| 2) | Rules, regulations, directives, and requirements that are issued by the U. S. Navy and NSWCPD under its responsibility for good order, administration, and security are applicable to all personnel who enter a Government installation or who travel on Government transportation. This is not to be construed or interpreted to establish any degree of Government control that is inconsistent with a non-personal services contract. |
(e) Inapplicability of Employee Benefits: This Contract does not create an employer-employee relationship. Accordingly, entitlements and benefits applicable to such relationships do not apply.
(f) Notice. It is the Contractor's, as well as the Government's, responsibility to monitor Contract activities and notify the Contracting Officer if the Contractor believes that the intent of this Section has been or may be violated.
| 1) | The Contractor should notify the Contracting Officer in writing within three (3) calendar days from the date of any incident that the Contractor considers to constitute a violation of this Section. The notice should include the date, nature, and circumstances of the conduct; the name, function, and activity of each Government employee or Contractor official or employee involved or knowledgeable about such conduct; identify any documents or substance of any oral communication involved in the conduct; and the estimate in time by which the Government must respond to this notice to minimize cost, delay, or disruption of performance. |
| 2) | The Contracting Officer will, within five (5) calendar days after receipt of notice, respond to the notice in writing. In responding, the Contracting Officer will either: |
| (i) | Confirm the conduct is in violation and when necessary direct the mode of further performance, |
| (ii) | Countermand any communication regarded as a violation, |
| (iii) | Deny that the conduct constitutes a violation and when necessary direct the mode of further performance, or |
| (iv) | In the event the notice is inadequate to make a decision, advise the Contractor what additional information is required, and establish the date by which it should be furnished by the Contractor. |
| 1.1 | BACKGROUND |
LHD-1 Class Main propulsion steam plants are equipped with Anchor Darling 12” Steam Valves that were designed and built in accordance with drawing D20305. This product line was acquired by Flowserve Corporation and Flowserve has full proprietary ownership of the original valve design. The Navy has no ownership over the design information of this valve and therefore cannot have one built and designed by another entity. Procuring this large steam valve for the 2SCOG critical spare program will enhance the Navy’s ability to repair, maintain, and replace large steam valves during shipyard availabilities.
1.2 SCOPE OF WORK
The Navy will be providing funding to complete two (2) MS-V-1 12” Large Steam Valve meant for use in the LHD-1 Class Main Propulsion Steam Plant. The valve must be built, tested, and certified to MIC LVL 1 standards as outlined in the applicable documents below. Valve must be certified to MIC LVL 1 standards by NSWCPD Code 242. Government review is required if any design specifications are changed.
2.0 APPLICABLE DOCUMENTS
2.1 NAVSEA 0948-LP-045-7010
2.2 APPENDIX A –MINIMUM STANDARD QUALITY CONTRACT REQUIREMENTS FOR AMTEIRAL PROCUREMENT, MODIFICAITON, REPAIR, OR OVERHAUL OF MATERIAL NON-NUCLEAR LEVEL 1 MATERIAL SMICS L1, C1, SL, AND LEVEL I SUPPORT SMIC Q3, VG
2.3 Flowserve Drawing Number D20305 – 12”-600 WELD ENDS ALLOY STEEL FLEX WEDGE GATE VALVE
2.4 MIL-I-45208
2.5 ISO9001:2008
2.6 MIL-STD-45662
2.7 ISO9001:2000
2.8 ISO9001:1994
2.9 ISO9002:1994
2.10 ISO10012
2.11 ANSI-Z540.1
3.0 REQUIREMENTS
The contractor shall provide Engineering and Technical Services to provide a fully MIC LVL 1 certified, according to Reference 2.1 2.2, and 2.3, MS-V-1 12” Large Steam Valve for use in the LHD-1 Class Steam Plant.
4.0 TESTING/VERIFICATIONS
Contractor will fulfill all testing and verification requirements in references 2.1, 2.2 and 2.3.
5.0 DATA REQUIREMENTS
5.1 Engineering Documentation Product Drawings (CDRL A001)
5.2 Program Progress Report (CDRL A002)
5.3 Quality Conformance Inspection and Test Procedure (CDRL A003)
6.0 SECURITY REQUIREMENTS
Contractor will to be able to handle the technical documentation at the appropriate classification level.
7.0 PLACE OF PERFORMANCE
All work is to be performed at the contractor’s facility.
8.0 TRAVEL
No travel is required
9.0 POINTS OF CONTACTS
The Technical Point of Contact (TPOC) for this contract is Kurt D. Klein, 215-897-6883, kurt.klein@navy.mil. The alternate TPOC is Sean Decker, 215-897-8690, sean.m.decker@navy.mil.
File details come from the government source that posted it. Updated .