DRAFT Turret Truck Specifications.docx

248 KB Posted

Attached to
Turret Truck
Solicitation number
PANAPG-24-P-0000017490
Issued by

About this file

Written by GovTribe AI ·

This document contains the draft minimum specifications for a turret truck to be procured by the Department of the Army. The key details are:

The turret truck must meet the following minimum requirements: a 3,000 lb. capacity, a minimum elevated fork height of 232 inches, a maximum overall collapsed mast height of 119 inches, UL approval, specific rail and roller dimensions, barrier-free cab design, AC traction/drive and lift motors, programmable lift/lower limit switch, flip-up side gates, full suspension seat, auto-center steering, 48V 1000 Ah minimum battery, power steering, integral hour meters, audible reverse alarm, safety features, and a one-year bumper-to-bumper warranty plus three-year warranty on the CPU and drive motor. The truck must also include line driver and wire guidance system installation. The turret trucks will be delivered to Tobyhanna Army Depot Building 5 Bay 5.

This is a sources sought notice for informational and planning purposes only, not a request for proposal. The solicitation number is PANAPG-24-P-0000017490.

View the file

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file
Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

5/1/24 DRAFT Turret Truck – Minimum Specifications Minimum Requirements = to or greater than:

1. Capacity: 3,000 LBS to full elevated fork height.

2. Minimum elevated fork height: 232-inches

3. Maximum overall collapsed mast height: 119 inches

4. UL approval: U.L. ‘E’ label required.

5. Rail face to rail face spacing is 60 inches

6. Guide Rollers: Low Profile 2.5” above finished floor, two (2ea.) sets on each side of truck spaced at 59.75” overall roller width for rail to rail of 60 inches

7. Rack Face to Rack Face (Clear Aisle) 67.5”

8. Pantograph Stroke Length: To be determined by site survey, maximum 9.00”.

9. Barrier free cab (without a bar/rail or barrier between operator and the pallet).

10. Forks: 40” overall length.

11. ‘AC’ traction/drive and lift motors and controls.

12. Programmable lift/lower limit switch w/by-pass @192” fork (including free lift).

13. Flip up side gates - travel motor locked-out when either gate is in raised position.

14. Flip up full suspension seat with single lever height adjustment. Seat position, up or down, allows for full travel and lift for sit/lean/stand operator positions.

15. Auto-center steering on power up.

16. Battery: 48 Volt – 1000 amp hour minimum battery, Battery compartment rollers with adjustable battery side gates.

17. Power steering.

18. Integral Hour meters for recording: Deadman pedal, lift motor, Drive motor, ignition ‘ON’ hours.

19. Audible Reverse (tractor first) travel alarm, amber safety strobe light, fire extinguisher.

20. Anti-fatigue foam rubber floor mat in operator’s compartment.

21. Full Body Harness w/ Retractable Tether – allows up to 300lbs. operator weight.

22. Mast Guard: Safety Glass for full view mast when operating in the standing position.

23. RF terminal bracket and wiring, 10amp service, includes factory installed universal mounting bracket located under the overhead guard.

24. Manuals: Operations, Maintenance, & Parts -- one (1) Electronic copy and one (1) hard copy of each.

25. Overhead fans and LED type dome lights and work lights in the operator’s compartment.

26. Safety Blue Lights: (Forward - fork First and Reverse - truck first)

27. Reverse alarm: Variable 82-102 DB

28. Receiving, unloading and field assembly of the trucks, battery installation, pre-flight test, and 90 day follow provided by the local receiving dealership and or factory field engineer. All equipment, rigging, rental equipment shall be provided by the local dealer for unloading and assembly of these trucks. Use of Government forklifts by contractor is prohibited. Government will not receive and unload these shipments.

29. Operator orientation and maintenance orientation by local dealer required for the trucks.

30. Battery charger sized appropriately for the battery. Charger shall be 208 VAC, three phase or capable of “multi-tap” that can be used with 208, 240, or 480 three phase power.

31. One (1) year OEM bumper-to-bumper warranty and three (3) years OEM warranty on vehicle’s CPU system and drive motor.

32. Line Driver & Wire Guidance – The appropriate line driver & wire guidance system shall be provided and line driver and wire installed. Installation shall include slurry removal. There are seven main aisles approximately 125’ each and seven short aisles approximately 25’ each requiring wire guidance. See attached sketch of Bldg. 5 Bay 5.

33. Turn-key installation to include battery charger electrical installation (electrical disconnects for battery charger and line driver to be provided and installed by government) and vehicle setup, and set-up of vehicle lift limit switches.

Delivery Address:

Tobyhanna Army Depot 11 Hap Arnold Blvd.

Tobyhanna, PA 18466 Building 5 Bay 5.

image1.jpg

File details come from the government source that posted it. Updated .