Draft Statement-of-Work SOW ver1.docx
DOCX document 23 KB Posted
- Attached to
- Forklift Side-shifting Fork Positioner
- Solicitation number
- W15QKN-25-Q-A077
About this file
This document is a Draft Statement of Work (SOW) for the Subsistence Supply Management Office at Fort Dix, NJ, detailing a requirement to purchase and install side-shifting fork positioners for three 4.5K electrical forklifts. The specific equipment involves a Cascade 55K side shifter fork positioner (Part No. 55K-FPS-A351) to be installed on Clark ECX20 Type E forklifts, which will allow operators to move forks laterally and adjust quickly to different pallet sizes without leaving their seats.
The procurement is associated with Solicitation Number W15QKN-25-Q-A077 under the Department of the Army Materiel Command Contracting Command at Picatinny Arsenal. The installation will be performed at the contractor's location, with one forklift delivered at a time, and the total performance period is 20 days after receipt of order. The primary point of contact for the project is Luz C. Tapia, who can be reached at luz.c.tapia.civ@mail.mil or 609-562-4154. The current status of the opportunity is a pre-solicitation, indicating the project is in the planning and preparation stages.
View the file
Other files
| File | Type | Posted |
|---|---|---|
| 25QA077 - Sources Sought Notice instructions.docx | DOCX document |
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Statement of Work Forklift Accessories Subsistence Supply Management Office, Supply & Services Branch, LRC-Dix
1.0 INTRODUCTION: Subsistence Supply Management Office, Supply & Services Branch, LRC-Dix has a requirement to purchase and add forklift side shifting fork positioners. The forklift side shifting attachment allows the operators to move the forks laterally from left to right. The fork positioner allows the operators to move the forks quickly and accurately to fit different pallet sizes without leaving their seats.
2.0 SCOPE OF WORK: The Contractor shall provide and install the side shifting fork positioners on three 4.5K electrical forklifts at their work site. Job completion will be done on one forklift at a time.
2.1 Delivery Location: One forklift at a time will be delivered by the Subsistence Supply Management Office to the contractor's location.
2.2 Primary Point of Contact (POC): The primary POC for any questions pertaining to this requirement is listed below.
Primary POC: Luz C. Tapia Phone: luz.c.tapia.civ@mail.mil Email: 609-562-4154
3.0 GENERAL REQUIREMENTS: The following features are specifications of the forklift being modified Standard Features:
· Electric four wheel Forklift
· 4,500 lb lift capacity
· Make Clark
· Model ECX20 Type E
· Four wheel cushion tires with tread for use indoor.
· Standard Mast with 189" maximum fork height
· 42" forks
· 24" load center
· 7,850 lb Truck weight without battery
· Rearward tilt 5 deg
· Battery 36 Volts type EO
(DRAFT)
Parts needed:
· 55K Cascade side shifter fork positioner
· Weight of attachment 145 lb
· Effective loss load 2.3
· Horizontal center of gravity 1.2"
· Vertical center of gravity 8.9"
· Capacity 55K lb
· Load center 24"
· Mounting type bolt on
· Mounting size Class II
· Minimum Useable ITA profile width required 35.2",
· Minimum opening range 2"
· Maximum opening range 32.1"
· Range is measured In to Out
· Frame width 37"
· Truck mounted Solenoid
· Hydraulic supply button
· Hose reel hydraulic supply RHT hand
· Repair labor
· 3/8" hydraulic hosing
· 3/8" female swivel
· Hydraulic oil
4.0 PERIOD OF PERFORMANCE: Installation will be 20 days ARO
CASCADE PART/ATTACHMENT
· Mfr Part No.:
55K-FPS-A351
· Manufacturer:
Cascade
· Mfr Part No.:
6821727
· Manufacturer:
Cascade
· Mfr Part No.:
673594
· Manufacturer:
Cascade
· Mfr Part No.:
0000NS
· Mfr Part No.:
3600CG
· Mfr Part No.:
3600CAB7
· Mfr Part No.:
3900RACK
File details come from the government source that posted it. Updated .