The file's text, extracted by GovTribe without its formatting.
STATEMENT OF WORK
Switch/VoIP Replacement
Issued by:
Portland Area Office Indian Health Service
1. Project Description
The Portland Area Indian Health Service (PAIHS) Division of Information Resources Management (DIRM) is replacing existing VoIP system and network switches. This project is to replace end-of-life switches, VoIP servers and other devices that are no longer supported. Manufacturer no longer provides hardware support, helpdesk support, and security updates/upgrades.
The current devices are unsupported so system failures risk the loss of data and possibly information systems being offline. Offline systems will impact patient services at the facilities. The lack of software and security updates may introduce security vulnerabilities to the IHS network. This requirement is used to support health goal objectives of individual patients and IHS mission to improve healthcare efforts for American Indian and Alaskan Native patients.
Indian Health Manual Chapter 26 Part 8 – End of Life Operating Systems, software, applications are to stay in compliance with federal law and mandates, Department of Health & Human Services (HHS) guidance, and strong managerial control.
2. Requirements
The requirement will include the purchase, configuration, and installation of Cisco Business Edition Call Control appliances, Cisco Unified Communications Manager (CUCM) and Cisco Unity Connection (CUC), various models of Cisco switches, and other applications and hardware equipment list below.
Contractor will provide all parts, labor and other hardware directly associated with installing and configuring the new equipment.
a. General Requirements
i. See the attached equipment list below. Any deviation from equipment list below must be approved by IHS DIRM.
ii. All equipment, accessories and material are new and not refurbished.
iii. Equipment and related items are to be shipped directly to each facility. See attached list of facilities for shipping addresses and contact information.
iv. IHS DIRM Technical Point of Contact.
Cynthia Ortega Telephone:503-414-7758 Cynthia.Ortega@ihs.gov
b. Tasks
1. LAN: Replace existing Cisco switches including:
a. Unmount old equipment. Old equipment must be accountable through IHS Property Management Officer (PMO), and may not be removed from facility without PMO consent.
b. Rack mount new equipment and reconnect all connections required for an active network.
c. Configuration will include port security, VoIP configuration and IHS VLAN standards. Work with Portland Area DIRM department for configuration specifications.
d. Reconnect all patch cables.
2. Cisco Collaboration: Migrate each existing VoIP systems to 2 locations: 1) Add to existing CUCM Publisher cluster at Portland Area Office and 2) CUCM Subscriber and CUC Publisher and CUC Subscriber to be installed in new appliance including:
a. Unmount old equipment. Old equipment must be accountable through IHS Property Management Officer (PMO), and may not be removed from facility without PMO consent.
b. Rack mount new Business Edition Call Control appliance and connect all required connections.
c. Work with Portland office DIRM department to join CUCM Publisher.
d. Install and configure CUCM and CUC applications.
e. Prepare and migrate existing users from old IP voice system to new voice system.
f. Unpack, setup and deploy IP phones – as noted per site.
g. Migrate existing and add new endpoint Device and Device Settings to include video endpoints.
h. Migrate or re-record/setup auto attendant messages.
i. Configure IHS provided voice gateway/router and test PRI voice circuit and analog connectivity.
j. Migrate or setup and test analog FAX services.
k. Migrate, move connection (to voice gateway/router) and test existing overhead paging system. A replacement voice gateway router may be provided – noted per site in equipment listing attached.
l. Perform SRST outage testing.
m. Provide documentation of configuration (as-built) to include reference of any changes made, added or deleted from the previous CUCM and CAC software configuration.
3. Misc. Hardware: Install ICC 24 Port 8P2C Telco Patch Panel and migrate existing ATA connections to voice gateway’s analog module – noted per site in equipment listing attached.
a. Ensure Telco Patch Panel is connected Cisco module to support analog connections.
b. Configure CUCM and/or voice gateway to support the connections.
4. InformaCast Advanced Perpetual server – noted per site in equipment listing attached:
a. Migrate from old to new appliance.
b. Upgrade to newest version.
c. Work with site to migrate existing licenses and ensure maintenance license is current.
d. Provide configuration documentation to site contact and to Portland Office DIRM.
5. Cisco Jabber: Replace IP Communicator with Cisco Jabber for voice.
a. Configure CUCM to support Cisco Jabber for voice
b. Uninstall IP Communicator and install and configure Cisco Jabber for voice for DIRM staff. Total of 6 computers.
c. Provide training to Portland Office DIRM.
d. Provide user training and user documentation.
6. DNA Center (Cisco Catalyst Center): Install, configure and deploy DNA services to include all supporting Cisco hardware Portland Area wide.
a. Contractor is required to have CCNP Enterprise certification with a minimum 3 years of experience with the deployment and support of DNA Center.
b. Work with Portland Office DIRM to determine best practice design. A copy of the valid certification must be submitted with the quote proposal.
c. Provide user training and user documentation to Portland Office DIRM.
d. Work with HQ to join their hub/spoke setup.
7. Cisco Routers: Configure and deploy existing ISR 4321 routers to remote sites.
a. Work with each specific site to schedule deployment and HQ to replace end-of-life (EOL) routers.
b. Work with Portland Office DIRM for shipping labels to ensure return of all EOL routers that are replaced. Estimate 30 sites connected to the IHS networks using an IHS.
c. Contractor not required to travel from Portland Area Office in Portland, Oregon. Configuration of routers will be performed at the Area Office.
3. Facility Responsibilities
a. Contractor will perform most duties within each facility’s normal operating business hours. If/when work needs to be done outside of normal operating business hours/days, contractor will coordinate access with Portland Area Office DIRM, Contracting Officer (CO) and Contracting Officer’s Representative (COR). A DIRM staff member will be required to be with contractor at all times.
b. Remote access provided when security and HSPD12 requirements are met.
c. Storage and staging of equipment and materials at the worksite shall be coordinated with the Facility Manager. The Contractor is responsible for all security regarding the staging of equipment.
d. Contract employees will check in as "visitors" each day at the office. Contractors entering the building will show identification and sign in and out each time they enter/leave the building.
e. It is the contractor’s responsibility to work with the facility manager to become familiar with the building layout, security requirements, vehicle access, fire safety, emergency exits, and evacuation procedures.
f. Contract employees must follow COVID requirements at the facility if applicable.
4. Government Responsibilities
a. Workspace will be made available for the Contractor while onsite.
a. Access to building drawings showing network Main Distribution Frame (MDF) and Intermediate Distribution Frames (IDF) will be provided by the government.
b. The Government will work with the contractor to develop defined timelines for the completion of the assigned tasks.
5. Constraints
a. The contractor must be a United States of America citizen. Must meet IHS security and HSPD12 requirements for network access. Work performed from remote locations must be performed within the United States.
b. All tasks under this contract will be conducted in accordance with Homeland Security Presidential Directive 12 https://www.dhs.gov/homeland-security-presidential-directive- 12, and FIPS-201 http://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.201-2.pdf.
SHIPPING ADDRESS
| FACILITY ADDRESS |
| POINT OF CONTACT |
PORTLAND AREA OFFICE
ATTN: Cynthia Ortega
1414 N.W. NORTHRUP STREET
SUITE 800
PORTLAND OR 97209
Cynthia Ortega Telephone: 503-304-7758 Email: Cynthia.Ortega@ihs.gov
Chemawa Indian Health Center ATTN: Dwight Kappl 3750 Chemawa Rd NE
SALEM OR 97305-1119
Dwight Kappl Telephone: 503-304-7633 Email: Kappl.Dwight@ihs.gov
Warm Springs Health and Wellness Center ATTN: Jaron Wells 1270 Kot-Num Rd.
WARM SPRINGS OR 97761
Jaron Wells Telephone:541-553-6277 Email: Jaron.Wells@ihs.gov
Yakama Indian Health Center ATTN: Daniel McMurtrey 401 Buster Rd
TOPPENISH WA 98948
Daniel McMurtrey Telephone: 509-865-1740 Email: Daniel.McMurtrey@ihs.gov
Office of Environmental Health and Engineering
Olympic District Office ATTN: Harrison Andina 500 Pacific Ave, Suite 400
BREMERTON WA 98337
Harrison Andina Telephone: 360-792-6465 Email: Harrison.Andina@ihs.gov
Port Angeles Field Office ATTN: Zachery Olson 1601 East Front St Building B, Suite C
PORT ANGELES WA 98362
Zackary Olson Telephone: 360-452-1196 Email: Zackary.Olson@ihs.gov
Spokane District Office ATTN: Mark Johnson 528 E Spokane Falls Blvd, Suite 302
SPOKANE WA 99202
Mark Johnson Telephone: 509-900-3701 Email: Mark.Johnson@ihs.gov
Fort Hall Field Office OEHE ATTN: Matthew Chadwick 116 Shoshone Drive
FORT HALL ID 83203
Matthew Chadwick Telephone: 208-238-5473 Email: Matthew.Chadwick@ihs.gov
DELIVERY INFORMATION
LISTED ITEMS ARE TO BE DELIVERED DIRECT TO LISTED LOCATIONS.
AREA OFFICE
Portland Area Indian Health Service 1414 NW Northrup Street Suite 800 Portland, Oregon 97209
Contact: Jonathan Hubbard Telephone: 503-414-7752 Email: Jonathan.Hubbard@ihs.gov
IMPORTANT FOR AREA OFFICE:
· There is no loading dock. Only street parking is available.
· There is no fright elevator. Only a passenger elevator is available. Elevator weight capacity is 3,500lbs.
· Equipment is to be delivered to the Division of Information Resource Management office on the 8th floor. Our office door is 38 inches wide. Full size pallets do not fit through the doorway.
OLYMPIC
Olympic District Office 500 Pacific Ave Suite 400
BREMERTON WA 98337-1904
Contact: Harrison Andina Telephone: 360-792-6465 Email: Harrison.Andina@ihs.gov
IMPORTANT FOR OLYMPIC:
· There is no fright elevator. Only a passenger elevator is available. Elevator capacity is rated at 2,500 lbs.
· Equipment is to be delivered to the office on the 4rd floor. Our office door is 36 inches wide. Full size pallets do not fit through the doorway.
PORT ANGELES
Port Angeles Field Office 1601 East Front St Building B, Suite C
PORT ANGELES WA 98362-4646
Contact: Zackary Olson Telephone: 360-452-1196 Email: Zackary.Olson@ihs.gov
IMPORTANT FOR SPOKANE:
SPOKANE
Spokane District Office 528 E. Spokane Falls Blvd.
Suite 302
SPOKANE WA 99202-5050
Contact: Mark Johnson Telephone: 509-900-3701 Email: Mark.Johnson@ihs.gov
IMPORTANT FOR SPOKANE:
· There is no fright elevator. Only a passenger elevator is available.
· Equipment is to be delivered to the office on the 3rd floor. Our office door is 36 inches wide. Full size pallets do not fit through the doorway.
Warm Springs
Warm Springs Health and Wellness Center 1270 Kot-Num Rd.
Warm Springs OR 97761
Contact: Jaron Wells Telephone: 541-553-6277 Email: Jaron.Wells@ihs.gov
IMPORTANT FOR WARM SPRINGS:
· There is no loading dock.
· Equipment is to be delivered to the Warehouse at the South end of the building near the helipad. Our office has double doors 70”W x 82”H.
EQUIPMENT REQUIREMENT
Vendor shall certify that it is a Cisco Authorized Channel as of the date of the submission of their offer, and that it has the certification/specialization level required by Cisco to support both the product sale and product pricing, in accordance with the applicable Cisco certification/specialization requirements. Unless otherwise specified, Vendor shall warrant that the products are new and in their original box. The Vendor confirms to have sourced all Cisco products submitted in this offer from Cisco or through Cisco Authorized Channels only, in accordance with all applicable laws and current Cisco's applicable policies at the time of purchase. Vendor shall provide Buyer with a copy of the End User license agreement, and shall warrant that all Cisco software is licensed originally to Buyer as the original licensee authorized to use the Cisco Software. Cisco Certifications should include:
Gold Integrator Advanced Collaboration Architecture Specialization Advanced Enterprise Networks Architecture Specialization Advanced Security Architecture Specialization Master Collaboration Specialization Master Networking Specialization Full-Stack Observability Solution Specialization CWNE Certified Wireless Networking Expert on staff CCIE Collaboration on Staff CCNP Collaboration on Staff Certified Project Management Professional (PMP) on Staff Certified IT Infrastructure Library (ITIL) on Staff BICSI Certified Installer on Staff
Other Required Certifications/verifications:
XM Fax Certification (OpenText Certified) Verification of a history of configuring and supporting Variphy with CUCM CDR and inventory experience.
BILL OF MATERIALS
Portland Area Office
| Line# |
| Part Number |
| Description |
| Serv |
Dur (Mos) Qty
| 1.0 |
| C8300-1N1S-6T-V |
| Cisco Catalyst C8300-1N1S-6T Router Voice bundle, NIM-PVDM-3 |
| --- |
| 1 |
| 1.0.1 |
| CON-SNT-C83001N1 |
| SNTC-8X5XNBD Cisco Catalyst C8300-1N1S-6T Router Voic |
| 60 |
| 1 |
| 1.1 |
| M2USB-32G |
| M.2 USB 32GB for Cisco 8300/8500L Series |
| --- |
| 1 |
| 1.2 |
| C-RFID-1R |
| RFID - 1RU for Cisco 8200/8300/8500L Series |
| --- |
| 1 |
| 1.3 |
| C8300-RM-19-1R |
| Rack mount kit - 19" 1RU for Cisco 8300 Series |
| --- |
| 1 |
| 1.4 |
| C8300-PIM-BLANK |
| PIM Blank for Cisco 8300 Series |
| --- |
| 1 |
| 1.5 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 1 |
| 1.6 |
| TE-R-SW |
| TE agent for IOSXE on Enterprise Routing |
| --- |
| 1 |
| 1.7 |
| C8000-HSEC |
| U.S. Export Restriction Compliance license for C8000 series |
| --- |
| 1 |
| 1.8 |
| SC8KBEUK9-1712 |
| UNIVERSAL |
| --- |
| 1 |
| 1.9 |
| IOSXE-AUTO-MODE |
| IOS XE Autonomous or SD-Routing mode for Unified image |
| --- |
| 1 |
| 1.10 |
| NIM-2MFT-T1/E1 |
| 2 port Multiflex Trunk Voice/Clear-channel Data T1/E1 Module |
| --- |
| 1 |
| 1.11 |
| PVDM4-64 |
| 64-channel DSP module |
| --- |
| 1 |
| 1.12 |
| NIM-4FXSP |
| 4-Port Network Interface Module - FXS, FXS-E and DID |
| --- |
| 1 |
| 1.13 |
| C-SM-NIM-ADPT |
| Cisco Catalyst SM to NIM Module Adaptor |
| --- |
| 1 |
| 1.14 |
| PWR-CC1-250WAC |
| Cisco C8300 1RU 250W AC Power supply |
| --- |
| 2 |
| 1.15 |
| CAB-AC |
| AC Power Cord (North America), C13, NEMA 5-15P, 2.1m |
| --- |
| 2 |
| 1.16 |
| DNA-P-T0-A-5Y |
| Cisco DNA Advantage On-Prem Lic 5Y - upto 25M (Aggr, 50M) |
| --- |
| 1 |
| 1.17 |
| DSTACK-T0-A |
| Cisco DNA Advantage Stack - upto 25M (Aggr, 50M) |
| --- |
| 1 |
| 1.18 |
| NWSTACK-T0-A |
| Cisco Network Advantage Stack - upto 25M (Aggr, 50M) |
| --- |
| 1 |
| 1.19 |
| TE-EMBED-WANI |
| Cisco ThousandEyes WAN Insights Embedded |
| --- |
| 1 |
| 1.20 |
| SDWAN-UMB-ADV |
| Cisco Umbrella for DNA Advantage |
| --- |
| 1 |
| 1.21 |
| DNAC-ONPREM-PF |
| Cisco DNA Center On Prem Deployment Option for WAN |
| --- |
| 1 |
| 1.22 |
| NIM-PVDM-64 |
| NIM with 64-channel DSP |
| --- |
| 1 |
| 1.23 |
| MEM-C8300-32GB |
| Cisco Catalyst 8300 Edge 32GB memory |
| --- |
| 1 |
| 1.24 |
| SVS-PDNA-ADV |
| Embedded Support for SW - Tiered DNA Advantage On-Prem |
| --- |
| 1 |
| 2.0 |
| C9410R-96U-BNDL-A |
| Catalyst 9400 Series 10 slot,1xSup, 2xLC, DNA-A LIC |
| --- |
| 2 |
| 2.0.1 |
| CON-SSSNT-C9410R9A |
| SOLN SUPP 8X5XNBD Catalyst 9400 Series 10 slot,Sup, 2xC940 |
| 60 |
| 2 |
| 2.1 |
| C9400-NW-A |
| Cisco Catalyst 9400 Network Advantage License |
| --- |
| 2 |
| 2.2 |
| C9400-S-BLANK |
| Cisco Catalyst 9400 Series Slot Blank Cover |
| --- |
| 2 |
| 2.3 |
| TE-C9K-SW |
| TE agent for IOSXE on C9K |
| --- |
| 2 |
| 2.4 |
| C9400-PWR-3200AC |
| Cisco Catalyst 9400 Series 3200W AC Power Supply |
| --- |
| 16 |
| 2.5 |
| C9400-DNA-A |
| Cisco Catalyst 9400 DNA Advantage Term License |
| --- |
| 2 |
| 2.5.0.1 |
| CON-SSTCM-C94A |
| SOLN SUPP SW SUBCisco Catalyst 9400 |
| 60 |
| 2 |
| 2.5.1 |
| C9400-DNA-A-5Y |
| Cisco Catalyst 9400 DNA Advantage - 5 Year License |
| 60 |
| 2 |
| 2.6 |
| D-DNAS-EXT-S-T |
| Cisco DNA Spaces Extend Term License for Catalyst Switches |
| --- |
| 2 |
| 2.6.1 |
| D-DNAS-EXT-S-5Y |
| Cisco DNA Spaces Extend for Catalyst Switching - 5Year |
| 60 |
| 2 |
| 2.7 |
| TE-EMBEDDED-T |
| Cisco ThousandEyes Enterprise Agent IBN Embedded |
| --- |
| 2 |
| 2.7.1 |
| TE-EMBEDDED-T-5Y |
| ThousandEyes - Enterprise Agents |
| 60 |
| 2 |
| 2.8 |
| NETWORK-PNP-NONE |
| Network Plug-n-Play Opt Out SKU |
| --- |
| 2 |
| 2.9 |
| C9400-QSFP-CVR |
| QSFP port EMI and dust protection cover |
| --- |
| 8 |
| 2.10 |
| C9000-HSEC |
| U.S. Export Restriction Compliance license for Catalyst 9000 |
| --- |
| 2 |
| 2.11 |
| C9400X-SUP-2XL-B |
| Catalyst 9400 Series SUP2XL BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 2 |
| 2.12 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 2.13 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 2.14 |
| C9400X-SUP-2XL |
| Cisco Catalyst 9400 Series Supervisor 2XL Module |
| --- |
| 2 |
| 2.15 |
| C9400-SSD-240GB |
| Cisco Catalyst 9400 Series 240GB M2 SATA memory (Supervisor) |
| --- |
| 2 |
| 2.16 |
| C9400-LC-48HX-B |
| Catalyst 9400 2xC9400-LC-48HX BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 2 |
| 2.17 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 2.18 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 2.19 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 2.20 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 2.21 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 2.22 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 2.23 |
| S9400UK9-1712 |
| Cisco Catalyst 9400 XE 17.12 UNIVERSAL |
| --- |
| 2 |
| 2.24 |
| CAB-US620P-C19-US |
| NEMA 6-20 to IEC-C19 13ft US |
| --- |
| 16 |
| 2.25 |
| C9K-ACC-SCR-12 |
| 12-24 and 10-32 SCREWS FOR RACK INSTALLATION, QTY 12 |
| --- |
| 2 |
| 2.26 |
| CAB-CON-C9K-RJ45 |
| Console Cable 6ft with RJ-45-to-RJ-45 |
| --- |
| 2 |
| 2.27 |
| CAB-GUIDE-10R |
| 10-SLOT CHASSIS CABLE MANAGEMENT GUIDES for 9400 |
| --- |
| 2 |
| 2.28 |
| C9K-ACC-ADP-DB9 |
| ADAPTER FOR DB9F TO RJ45 for 9400 |
| --- |
| 2 |
| 3.0 |
| C9300X-48TX-A |
| Catalyst 9300 48-port mGig data only, Network Advantage |
| --- |
| 2 |
| 3.0.1 |
| CON-SSSNT-C9300XZ4 |
| SOLN SUPP 8X5XNBD Catalyst 9300 48-port mGig data only, Ne |
| 60 |
| 2 |
| 3.1 |
| C9300-NW-A-48 |
| C9300 Network Advantage, 48-port license |
| --- |
| 2 |
| 3.2 |
| PWR-C1-715WAC-P |
| 715W AC 80+ platinum Config 1 Power Supply |
| --- |
| 2 |
| 3.3 |
| PWR-C1-715WAC-P/2 |
| 715W AC 80+ platinum Config 1 SecondaryPower Supply |
| --- |
| 2 |
| 3.4 |
| CAB-TA-NA |
| North America AC Type A Power Cable |
| --- |
| 4 |
| 3.5 |
| C9300-SSD-NONE |
| No SSD Card Selected |
| --- |
| 2 |
| 3.6 |
| STACK-T1-50CM |
| 50CM Type 1 Stacking Cable |
| --- |
| 2 |
| 3.7 |
| CAB-SPWR-30CM |
| Catalyst Stack Power Cable 30 CM |
| --- |
| 2 |
| 3.8 |
| TE-C9K-SW |
| TE agent for IOSXE on C9K |
| --- |
| 2 |
| 3.9 |
| C9300X-NM-BLANK |
| Catalyst 9300 Network Module Blank Module |
| --- |
| 2 |
| 3.10 |
| C9000-HSEC |
| U.S. Export Restriction Compliance license for Catalyst 9000 |
| --- |
| 2 |
| 3.11 |
| C9300-DNA-A-48 |
| C9300 DNA Advantage, 48-Port Term Licenses |
| --- |
| 2 |
| 3.11.0.1 |
| CON-SSTCM-C93A48 |
| SOLN SUPP SW SUBC9300 DNA Advantage |
| 60 |
| 2 |
| 3.11.1 |
| C9300-DNA-A-48-5Y |
| C9300 DNA Advantage, 48-Port, 5 Year Term License |
| 60 |
| 2 |
| 3.12 |
| TE-EMBEDDED-T |
| Cisco ThousandEyes Enterprise Agent IBN Embedded |
| --- |
| 2 |
| 3.12.1 |
| TE-EMBEDDED-T-5Y |
| ThousandEyes - Enterprise Agents |
| 60 |
| 2 |
| 3.13 |
| D-DNAS-EXT-S-T |
| Cisco DNA Spaces Extend Term License for Catalyst Switches |
| --- |
| 2 |
| 3.13.1 |
| D-DNAS-EXT-S-5Y |
| Cisco DNA Spaces Extend for Catalyst Switching - 5Year |
| 60 |
| 2 |
| 3.14 |
| C9300X-NM-NONE |
| Catalyst 9300 No-Network Module Selection |
| --- |
| 2 |
| 3.15 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 2 |
| 3.16 |
| NETWORK-PNP-NONE |
| Network Plug-n-Play Opt Out SKU |
| --- |
| 2 |
| 3.17 |
| C9K-ACC-RBFT |
| RUBBER FEET FOR TABLE TOP SETUP 9200 and 9300 |
| --- |
| 2 |
| 3.18 |
| C9K-ACC-SCR-4 |
| 12-24 and 10-32 SCREWS FOR RACK INSTALLATION, QTY 4 |
| --- |
| 2 |
| 3.19 |
| CAB-GUIDE-1RU |
| 1RU CABLE MANAGEMENT GUIDES 9200 and 9300 |
| --- |
| 2 |
| 3.20 |
| SC9300UK9-1712 |
| Cisco Catalyst 9300 XE 17.12 UNIVERSAL |
| --- |
| 2 |
| 4.0 |
| C9200CX-8UXG-2X-A |
| Catalyst 9000 Compact Switch 8 port UPoE with 4xmGig,240W,A |
| --- |
| 2 |
| 4.0.1 |
| CON-SSSNT-CX9293CX |
| SOLN SUPP 8X5XNBD Catalyst 9000 Compact Switch 8 port UPoE |
| 60 |
| 2 |
| 4.1 |
| C9200CX-NW-A-8 |
| C9200CX Network Advantage, 8-port license |
| --- |
| 2 |
| 4.2 |
| CAB-TA-NA |
| North America AC Type A Power Cable |
| --- |
| 2 |
| 4.3 |
| NETWORK-PNP-NONE |
| Network Plug-n-Play Opt Out SKU |
| --- |
| 2 |
| 4.4 |
| C9200CX-DNA-A-8 |
| C9200CX Cisco DNA Advantage, 8-Port Term Licenses |
| --- |
| 2 |
| 4.4.0.1 |
| CON-SSTCM-C9201CCD |
| SOLN SUPP SW SUB C9200CX Cisco DNA Advantage, 8-Port Term |
| 60 |
| 2 |
| 4.4.1 |
| C9200CX-DNAA8-5Y |
| C9200CX Cisco DNA Advantage, 5Y Term License, 8P |
| 60 |
| 2 |
| 4.5 |
| CAB-CON-USBRJ45 |
| Console Adapter - Micro USB to RJ45 |
| --- |
| 2 |
| 4.6 |
| SCAT9200CXUK9-1712 |
| Cisco Catalyst 9200CX XE 17.12 UNIVERSAL |
| --- |
| 2 |
| 5.0 |
| C9200CX-8P-2X2G-A |
| Catalyst 9000 Compact Switch 8 port PoE+, 240W, Adv |
| --- |
| 1 |
| 5.0.1 |
| CON-L1NCD-C920CXYZ |
| CX LEVEL 1 8X7NCD Catalyst 9000 Compact Switch 8 port PoE+ |
| 60 |
| 1 |
| 5.1 |
| C9200CX-DNA-A-8 |
| C9200CX Cisco DNA Advantage, 8-Port Term Licenses |
| --- |
| 1 |
| 5.1.0.1 |
| CON-L1SWT-C9201CCD |
| CX LEVEL 1 SW SUB C9200CX Cisco DNA Advantage, 8-Port Term |
| 60 |
| 1 |
| 5.1.1 |
| C9200CX-DNAA8-5Y |
| C9200CX Cisco DNA Advantage, 5Y Term License, 8P |
| 60 |
| 1 |
| 5.2 |
| C9200CX-NW-A-8 |
| C9200CX Network Advantage, 8-port license |
| --- |
| 1 |
| 5.3 |
| CAB-TA-NA |
| North America AC Type A Power Cable |
| --- |
| 1 |
| 5.4 |
| CAB-CON-USBRJ45 |
| Console Adapter - Micro USB to RJ45 |
| --- |
| 1 |
| 5.5 |
| SCAT9200CXUK9-1715 |
| Cisco Catalyst 9200CX XE UNIVERSAL |
| --- |
| 1 |
| 5.6 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 1 |
| 5.7 |
| RACKMNT-19-CMPACT |
| 19 in Rackmount for 9200CX switches |
| --- |
| 1 |
| 6.0 |
| C9130AXI-B |
| Cisco Catalyst 9130AX Series |
| --- |
| 1 |
| 6.0.1 |
| CON-L1NCD-C913BIXI |
| CX LEVEL 1 8X7NCDCisco Catalyst 9130AX Series |
| 60 |
| 1 |
| 6.1 |
| CDNA-A-C9130 |
| Wireless Cisco DNA On-Prem Advantage, 9130 Tracking |
| --- |
| 1 |
| 6.1.1 |
| DNA-A-5Y-C9130 |
| C9130AX Cisco DNA On-Prem Advantage,5Y Term,Trk Lic |
| 60 |
| 1 |
| 6.2 |
| AIR-DNA-A |
| Wireless Cisco DNA On-Prem Advantage, Term Lic |
| --- |
| 1 |
| 6.2.0.1 |
| CON-L1SWT-AIRDNAA |
| CX LEVEL 1 SW SUB Aironet CISCO DNA Ad |
| 60 |
| 1 |
| 6.2.1 |
| AIR-DNA-A-5Y |
| Wireless Cisco DNA On-Prem Advantage, 5Y Term Lic |
| 60 |
| 1 |
| 6.3 |
| AIR-DNA-A-T |
| Wireless Cisco DNA On-Prem Advantage, Term, Tracker Lic |
| --- |
| 1 |
| 6.3.1 |
| AIR-DNA-A-T-5Y |
| Wireless Cisco DNA On-Prem Advantage, 5Y Term, Tracker Lic |
| 60 |
| 1 |
| 6.4 |
| SPACES-EXT-T |
| Cisco Spaces Extend Term License for Cisco DNA Advantage |
| --- |
| 1 |
| 6.4.1 |
| SPACES-EXT-5Y |
| Cisco Spaces Extend for Cisco DNA Advantage |
| 60 |
| 1 |
| 6.5 |
| SW9130AX-CAPWAP-K9 |
| Capwap software for Catalyst 9130AX |
| --- |
| 1 |
| 6.6 |
| AIR-AP-BRACKET-1 |
| 802.11 AP Low Profile Mounting Bracket (Default) |
| --- |
| 1 |
| 6.7 |
| AIR-AP-T-RAIL-R |
| Ceiling Grid Clip for APs & Cellular Gateways-Recessed |
| --- |
| 1 |
| 6.8 |
| AIR-DNA-NWSTACK-A |
| Wireless DNA Perpetual Network Stack - Advantage |
| --- |
| 1 |
| 6.9 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 1 |
| 6.10 |
| C9130-SINGLE |
| SINGLE PACK OPTION |
| --- |
| 1 |
| 6.11 |
| C9130-OVER |
| C9130AX OVER OPTION |
| --- |
| 1 |
| 7.0 |
| DN3-HW-APL-L |
| Cisco Catalyst Center Appliance (Gen 3) - 56 Core |
| --- |
| 1 |
| 7.0.1 |
| CON-L1NCD-DN3HWAPL |
| CX LEVEL 1 8X7NCD Cisco DNA Center Appliance (Gen 3) - 56 |
| 12 |
| 1 |
| 7.1 |
| DNA-SW-2.3.7 |
| Cisco Catalyst Center SW 2.3.7 |
| --- |
| 1 |
| 7.2 |
| DN3-HW-APL-L-LIC |
| Cisco Catalyst Center Appliance License - 56 Core |
| --- |
| 1 |
| 7.3 |
| DN3-CPU-I6348 |
| Intel 6348 2.6GHz/235W 28C/42MB DDR4 3200MHz |
| --- |
| 2 |
| 7.4 |
| DN3-MR-X32G2RW |
| 32GB RDIMM DRx4 3200 (8Gb) |
| --- |
| 12 |
| 7.5 |
| DN3-SD38TKA1X-EV |
| 3.8TB 2.5 inch Enterprise Value 12G SAS SSD |
| --- |
| 2 |
| 7.6 |
| DN3-RAID-220M6 |
| Cisco 12G SAS RAID Controller w/4GB FBWC (16 Drv) w/1U Brkt |
| --- |
| 1 |
| 7.7 |
| DN3-PSU1-2300W |
| Cisco UCS 2300W AC Power Supply for Rack Servers Titanium |
| --- |
| 2 |
| 7.8 |
| DN3-GPURKIT-C220 |
| GPU Riser Bracket assy kit C220 / C225 1U |
| --- |
| 1 |
| 7.9 |
| DN3-TPM-002C |
| TPM 2.0, TCG, FIPS140-2, CC EAL4+ Certified, for M6 servers |
| --- |
| 1 |
| 7.10 |
| DN3-SDB960SA1V |
| 960GB 2.5in 6G SATA Enter Value 1X Samsung G1PM893A SSD |
| --- |
| 2 |
| 7.11 |
| DN3-SDB3T8SA1V |
| 3.8TB 2.5in 6G SATA Enter Value 1X Samsung G1PM893A SSD |
| --- |
| 6 |
| 7.12 |
| DN3-P-I8Q25GF |
| Cisco-Intel E810XXVDA4L 4x25/10 GbE SFP28 PCIe NIC |
| --- |
| 1 |
| 7.13 |
| DN3-P-I8D25GF |
| Cisco-Intel E810XXVDA2 2x25/10 GbE SFP28 PCIe NIC |
| --- |
| 1 |
| 7.14 |
| CAB-US515P-C19-US |
| NEMA 5-15 to IEC-C19 13ft US |
| --- |
| 2 |
| 8.0 |
| CS-DESKPRO-K9 |
| Cisco Desk Pro |
| --- |
| 7 |
| 8.1 |
| PWR-CORD-USA-B |
| Power Cord for United States of America 2m 10A |
| --- |
| 7 |
| 8.2 |
| CS-PWR-CUBE-7- |
| Power Supply for Desk Pro Series |
| --- |
| 7 |
| 8.3 |
| CAB-USBC-1.8M- |
| SB-C 3.1 Cable, 1.8M length |
| --- |
| 7 |
| 8.4 |
| CAB-2HDMI-1.5M-GR- |
| 1.5m GREY HDMI 2.0 |
| --- |
| 7 |
| 8.5 |
| CS-DESKPRO-STYLUS- |
| Stylus Pen for Cisco Desk Pro |
| --- |
| 7 |
| 8.6 |
| CAB-ETH-3M-GR- |
| CAB 3m GREY ETHERNET |
| --- |
| 7 |
| 8.7 |
| CS-DESKPRO-STAND- |
| Table Stand & Connector Cover for Desk Pro Series |
| --- |
| 7 |
| 8.8 |
| CS-DESKPRO-FG- |
| Fabric Speaker Grille for Desk Pro Series |
| --- |
| 7 |
| 9.0 |
| A-DEVICE-PACKAGE |
| Device Package Support Subscription |
| --- |
| 7 |
Initial Term - 60.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term | Requested Start Date - 25-May-2025 | Requested End Date - 24-May-2030
| 9.1 |
| A-CD-DESKPRO |
| Control Hub, Adv Analytics & Cloud Updates with ESS 8x5xNBD |
| --- |
| 7 |
| 9.2 |
| SVS-DESKPRO-ECDN |
| Cisco Desk Pro Support ESS WITH 8X5XNBD |
| --- |
| 7 |
| 10.0 |
| CP-HS-W-USBA= |
| Quick Disconnect USBA Headset Cable |
| --- |
| 15 |
| 11.0 |
| CP-HS-W-USBC |
| Quick Disconnect USBC Headset Cable |
| --- |
| 20 |
| 12.0 |
| CP-HS-W-521-USBC |
| Headset 521 Wired Single 3.5mm + USBC Headset Adapter |
| --- |
| 20 |
| 12.0.1 |
| CON-SNT-PHYBCWY4 |
| Headset 521 Wired Single 3.5mm + USBC Headset AdapterSNTC-8X |
| 60 |
| 20 |
| 13.0 |
| CP-HS-W-USBC |
| Quick Disconnect USBC Headset Cable |
| --- |
| 40 |
| 14.0 |
| CP-DX-CORD= |
| Spare Handset Cord for Cisco 8800, DX650 |
| --- |
| 30 |
| 15.0 |
| ICMPP24T2C |
| ICC 24 Port 8P2C Telco Patch Panel, Integrated with 1 male 50-pin telco connector |
| --- |
| 3 |
| 16.0 |
| IPTA-M3YR-A |
| InformaCast Advanced Notification Maintenance, Term 3 Year(s) |
| --- |
| 250 |
| 17.0 |
| VoIP/Router Services |
| 1. Replace existing voice router by rack mount/installing, setup/configure new voice router. |
2. Replace existing switches by rack mount/installing, setup/configure new switches.
3. Upgrade IOS on existing 2 ea. Cisco WLAN Controllers and approximately 220 Cisco WAP's.
4. Upgrade existing Singlewire InformaCast server software.
5. Upgrade existing Variphy server software.
6. Configure Cisco Jabber on existing Portland CUCM cluster and replace/upgrade/train IP Communicator users with Jabber. Estimate 20 users.
7. Configure/support DNA Center configuration by adding Portland Area switches. Work with HQ to join their spoke/wheel setup.
8. Upgrade UCS appliance firmware (licenses provided by IHS), CUCM and UCS version software to secure versions as recommended by Cisco.
Chemawa Indian Health Center
| Line# |
| Part Number |
| Description |
| Serv |
Dur (Mos) Qty
| 1.0 |
| C8300-2N2S-6T-V |
| Cisco Catalyst C8300-2N2S-6T Router Voice Bundle, NIM-PVDM-6 |
| --- |
| 1 |
| 1.0.1 |
| CON-SNT-C83002N1 |
| SNTC-8X5XNBD Cisco Catalyst C8300-2N2S-6T Router Voic |
| 60 |
| 1 |
| 1.1 |
| MEM-C8300-32GB |
| Cisco Catalyst 8300 Edge 32GB memory |
| --- |
| 1 |
| 1.2 |
| M2USB-16G |
| Cisco Catalyst 8000 Edge M.2 USB 16GB |
| --- |
| 1 |
| 1.3 |
| C-RFID-2R |
| Cisco Catalyst 8000 Edge RFID - 2RU |
| --- |
| 1 |
| 1.4 |
| C8300-RM-19-2R |
| Cisco Catalyst 8300 Rack mount kit - 19" 2R |
| --- |
| 1 |
| 1.5 |
| C8300-PIM-BLANK |
| Cisco Catalyst 8300 Edge PIM Blank |
| --- |
| 1 |
| 1.6 |
| C8300-FAN-2R |
| Cisco Catalyst 8300 Edge Fan Tray, 2RU |
| --- |
| 1 |
| 1.7 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 1 |
| 1.8 |
| C-POE-COVER |
| Cover for empty POE slot on Cisco Catalyst Edge 8300 |
| --- |
| 2 |
| 1.9 |
| TE-R-SW |
| TE agent for IOSXE on Enterprise Routing |
| --- |
| 1 |
| 1.10 |
| C8000-HSEC |
| U.S. Export Restriction Compliance license for C8000 series |
| --- |
| 1 |
| 1.11 |
| SC8KBEUK9-179 |
| UNIVERSAL |
| --- |
| 1 |
| 1.12 |
| IOSXE-AUTO-MODE |
| IOS XE Autonomous or SD-Routing mode for Unified image |
| --- |
| 1 |
| 1.13 |
| NIM-PVDM-64 |
| NIM with 64-channel DSP |
| --- |
| 1 |
| 1.14 |
| NIM-2MFT-T1/E1 |
| 2 port Multiflex Trunk Voice/Clear-channel Data T1/E1 Module |
| --- |
| 1 |
| 1.15 |
| PVDM4-128 |
| 128-channel DSP module |
| --- |
| 1 |
| 1.16 |
| NIM-2FXO |
| 2-port Network Interface Module - FXO (Universal) |
| --- |
| 1 |
| 1.17 |
| NIM-4FXSP |
| 4-Port Network Interface Module - FXS, FXS-E and DID |
| --- |
| 1 |
| 1.18 |
| C-SM-NIM-ADPT |
| Cisco Catalyst SM to NIM Module Adaptor |
| --- |
| 1 |
| 1.19 |
| SM-X-16FXS/2FXO |
| High Density Analog Voice Module for ISR4K - 16FXS and 2FXO |
| --- |
| 1 |
| 1.20 |
| PWR-CC1-650WAC |
| Cisco C8300 2RU AC Power supply |
| --- |
| 2 |
| 1.21 |
| CAB-AC |
| AC Power Cord (North America), C13, NEMA 5-15P, 2.1m |
| --- |
| 2 |
| 1.22 |
| DNA-P-T0-A-5Y |
| Cisco DNA Advantage On-Prem Lic 5Y - upto 25M (Aggr, 50M) |
| --- |
| 1 |
Initial Term - 60.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term
| 1.23 |
| SVS-PDNA-ADV |
| Embedded Support for SW - Tiered DNA Advantage On-Prem |
| --- |
| 1 |
| 1.24 |
| DSTACK-T0-A |
| Cisco DNA Advantage Stack - upto 25M (Aggr, 50M) |
| --- |
| 1 |
| 1.25 |
| NWSTACK-T0-A |
| Cisco Network Advantage Stack - upto 25M (Aggr, 50M) |
| --- |
| 1 |
| 1.26 |
| TE-EMBED-WANI |
| Cisco ThousandEyes WAN Insights Embedded |
| --- |
| 1 |
| 1.27 |
| SDWAN-UMB-ADV |
| Cisco Umbrella for DNA Advantage |
| --- |
| 1 |
| 1.28 |
| DNAC-ONPREM-PF |
| Cisco DNA Center On Prem Deployment Option for WAN |
| --- |
| 1 |
| 1.29 |
| C83-2N2S-6T-PF |
| C8300-2N2S-6T Platform Selection for DNA Subscription |
| --- |
| 1 |
| 1.30 |
| IOSXE-AUTO-MODE-PF |
| IOS XE Autonomous or SD-Routing mode for Unified image |
| --- |
| 1 |
| 2.0 |
| BE7M-M6-K9 |
| Cisco Business Edition 7000M (M6) Appliance, Export Restr SW |
| --- |
| 1 |
| 2.0.1 |
| CON-OSP-BE7MGT6K |
| SNTC-24X7X4OS Cisco Business Edition 7000M (M6) Applia |
| 60 |
| 1 |
| 2.1 |
| VIRT-LIC-NONE |
| ESXi lic NOT included; sold separately or customer-provided |
| --- |
| 1 |
| 2.2 |
| BE7M-CPU-M6 |
| Intel 6326 2.9GHz/185W 16C/24MB DDR4 3200MHz |
| --- |
| 1 |
| 2.3 |
| BE7K-RAM-M6-M5 |
| 16GB RDIMM SRx4 3200 (8Gb) |
| --- |
| 6 |
| 2.4 |
| BE7K-RAIDCTRLR-M6 |
| Cisco M6 12G SAS RAID Controller with 4GB FBWC (28 Drives) |
| --- |
| 1 |
| 2.5 |
| BE7K-DISK-M6 |
| 600GB 12G SAS 10K RPM SFF HDD |
| --- |
| 16 |
| 2.6 |
| BE7K-PCIERISER-M6 |
| C240 M6 Riser1A; (x8;x16x, x8); StBkt; (CPU1) |
| --- |
| 1 |
| 2.7 |
| BE7K-NIC-M6 |
| Cisco-Intel X710T4LG 4x10 GbE RJ45 PCIe NIC |
| --- |
| 1 |
| 2.8 |
| BE7K-NIC-M6 |
| Cisco-Intel X710T4LG 4x10 GbE RJ45 PCIe NIC |
| --- |
| 1 |
| 2.9 |
| BE7K-PSU |
| Cisco UCS 1050W AC Power Supply for Rack Server |
| --- |
| 2 |
| 2.10 |
| BE7K-TPM-M6 |
| TPM 2.0, TCG, FIPS140-2, CC EAL4+ Certified, for M6 servers |
| --- |
| 1 |
| 2.11 |
| CAB-9K12A-NA |
| Power Cord, 125VAC 13A NEMA 5-15 Plug, North America |
| --- |
| 2 |
| 3.0 |
| C9410R-96U-BNDL-A |
| Catalyst 9400 Series 10 slot,1xSup, 2xLC, DNA-A LIC |
| --- |
| 2 |
| 3.0.1 |
| CON-L1NCD-C9410R9A |
| CX LEVEL 1 8X7NCDCatalyst 9400 Series 10 slotSup 2xC940 |
| 60 |
| 2 |
| 3.1 |
| C9400-DNA-A |
| Cisco Catalyst 9400 DNA Advantage Term License |
| --- |
| 2 |
| 3.1.0.1 |
| CON-L1SWT-C94A |
| CX LEVEL 1 SW SUB Cisco Catalyst 9400 |
| 60 |
| 2 |
| 3.1.1 |
| C9400-DNA-A-5Y |
| Cisco Catalyst 9400 DNA Advantage - 5 Year License |
| 60 |
| 2 |
| 3.2 |
| D-DNAS-EXT-S-T |
| Cisco DNA Spaces Extend Term License for Catalyst Switches |
| --- |
| 2 |
| 3.2.1 |
| D-DNAS-EXT-S-5Y |
| Cisco DNA Spaces Extend for Catalyst Switching - 5Year |
| 60 |
| 2 |
| 3.3 |
| TE-EMBEDDED-T |
| Cisco ThousandEyes Enterprise Agent IBN Embedded |
| --- |
| 2 |
| 3.3.1 |
| TE-EMBEDDED-T-5Y |
| ThousandEyes - Enterprise Agents |
| 60 |
| 2 |
| 3.4 |
| C9400-NW-A |
| Cisco Catalyst 9400 Network Advantage License |
| --- |
| 2 |
| 3.5 |
| C9400-S-BLANK |
| Cisco Catalyst 9400 Series Slot Blank Cover |
| --- |
| 2 |
| 3.6 |
| TE-C9K-SW |
| TE agent for IOSXE on C9K |
| --- |
| 2 |
| 3.7 |
| C9400-QSFP-CVR |
| QSFP port EMI and dust protection cover |
| --- |
| 6 |
| 3.8 |
| C9400-PWR-3200AC |
| Cisco Catalyst 9400 Series 3200W AC Power Supply |
| --- |
| 16 |
| 3.9 |
| C9K-ACC-SCR-12 |
| 12-24 and 10-32 SCREWS FOR RACK INSTALLATION, QTY 12 |
| --- |
| 2 |
| 3.10 |
| C9000-HSEC |
| U.S. Export Restriction Compliance license for Catalyst 9000 |
| --- |
| 2 |
| 3.11 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.12 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.13 |
| C9400X-SUP-2XL-B |
| Catalyst 9400 Series SUP2XL BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 2 |
| 3.14 |
| C9400X-SUP-2XL |
| Cisco Catalyst 9400 Series Supervisor 2XL Module |
| --- |
| 2 |
| 3.15 |
| C9400-SSD-480GB |
| Cisco Catalyst 9400 Series 480GB M2 SATA memory (Supervisor) |
| --- |
| 2 |
| 3.16 |
| C9400-LC-48HX-B |
| Catalyst 9400 2xC9400-LC-48HX BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 2 |
| 3.17 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.18 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.19 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.20 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.21 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.22 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.23 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 2 |
| 3.24 |
| CAB-CON-C9K-RJ45 |
| Console Cable 6ft with RJ-45-to-RJ-45 |
| --- |
| 2 |
| 3.25 |
| CAB-GUIDE-10R |
| 10-SLOT CHASSIS CABLE MANAGEMENT GUIDES for 9400 |
| --- |
| 2 |
| 3.26 |
| C9K-ACC-ADP-DB9 |
| ADAPTER FOR DB9F TO RJ45 for 9400 |
| --- |
| 2 |
| 3.27 |
| SFP-10/25G-CSR-S |
| Dual Rate 10/25GBASE-CSR SFP Module |
| --- |
| 2 |
| 3.28 |
| QSFP-H40G-AOC2M |
| 40GBASE Active Optical Cable, 2m |
| --- |
| 2 |
| 3.29 |
| S9400UK9-1712 |
| Cisco Catalyst 9400 XE 17.12 UNIVERSAL |
| --- |
| 2 |
| 3.30 |
| CAB-US620P-C19-US |
| NEMA 6-20 to IEC-C19 13ft US |
| --- |
| 16 |
| 4.0 |
| C9407R-96U-BNDL-A |
| Catalyst 9400 Series 7 slot, 1xSup, 2xLC, DNA-A LIC |
| --- |
| 1 |
| 4.0.1 |
| CON-L1NCD-C9407R9A |
| CX LEVEL 1 8X7NCDCatalyst 9400 Series 7 slot Sup 2xC940 |
| 60 |
| 1 |
| 4.1 |
| C9400-DNA-A |
| Cisco Catalyst 9400 DNA Advantage Term License |
| --- |
| 1 |
| 4.1.0.1 |
| CON-L1SWT-C94A |
| CX LEVEL 1 SW SUB Cisco Catalyst 9400 |
| 60 |
| 1 |
| 4.1.1 |
| C9400-DNA-A-5Y |
| Cisco Catalyst 9400 DNA Advantage - 5 Year License |
| 60 |
| 1 |
| 4.2 |
| D-DNAS-EXT-S-T |
| Cisco DNA Spaces Extend Term License for Catalyst Switches |
| --- |
| 1 |
| 4.2.1 |
| D-DNAS-EXT-S-5Y |
| Cisco DNA Spaces Extend for Catalyst Switching - 5Year |
| 60 |
| 1 |
| 4.3 |
| TE-EMBEDDED-T |
| Cisco ThousandEyes Enterprise Agent IBN Embedded |
| --- |
| 1 |
| 4.3.1 |
| TE-EMBEDDED-T-5Y |
| ThousandEyes - Enterprise Agents |
| 60 |
| 1 |
| 4.4 |
| C9400-NW-A |
| Cisco Catalyst 9400 Network Advantage License |
| --- |
| 2 |
| 4.5 |
| TE-C9K-SW |
| TE agent for IOSXE on C9K |
| --- |
| 1 |
| 4.6 |
| C9400-QSFP-CVR |
| QSFP port EMI and dust protection cover |
| --- |
| 6 |
| 4.7 |
| C9400-PWR-3200AC |
| Cisco Catalyst 9400 Series 3200W AC Power Supply |
| --- |
| 8 |
| 4.8 |
| CAB-CON-C9K-RJ45 |
| Console Cable 6ft with RJ-45-to-RJ-45 |
| --- |
| 1 |
| 4.9 |
| CAB-GUIDE-7R |
| 7-SLOT CHASSIS CABLE MANAGEMENT GUIDES for 9400 |
| --- |
| 1 |
| 4.10 |
| C9K-ACC-ADP-DB9 |
| ADAPTER FOR DB9F TO RJ45 for 9400 |
| --- |
| 1 |
| 4.11 |
| C9K-ACC-SCR-12 |
| 12-24 and 10-32 SCREWS FOR RACK INSTALLATION, QTY 12 |
| --- |
| 1 |
| 4.12 |
| C9000-HSEC |
| U.S. Export Restriction Compliance license for Catalyst 9000 |
| --- |
| 1 |
| 4.13 |
| C9400X-SUP-2XL/2 |
| Cisco Catalyst 9400 Series Redundant Supervisor 2XL Module |
| --- |
| 1 |
| 4.14 |
| C9400-SSD-480GB |
| Cisco Catalyst 9400 Series 480GB M2 SATA memory (Supervisor) |
| --- |
| 1 |
| 4.15 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 4.16 |
| C9400X-SUP-2XL-B |
| Catalyst 9400 Series SUP2XL BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 1 |
| 4.17 |
| C9400X-SUP-2XL |
| Cisco Catalyst 9400 Series Supervisor 2XL Module |
| --- |
| 1 |
| 4.18 |
| C9400-SSD-480GB |
| Cisco Catalyst 9400 Series 480GB M2 SATA memory (Supervisor) |
| --- |
| 1 |
| 4.19 |
| C9400-LC-48HX-B |
| Catalyst 9400 2xC9400-LC-48HX BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 1 |
| 4.20 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 4.21 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 4.22 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 4.23 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 4.24 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 1 |
| 4.25 |
| SFP-10/25G-CSR-S |
| Dual Rate 10/25GBASE-CSR SFP Module |
| --- |
| 1 |
| 4.26 |
| SFP-10/25G-CSR-S |
| Dual Rate 10/25GBASE-CSR SFP Module |
| --- |
| 1 |
| 4.27 |
| QSFP-H40G-AOC1M |
| 40GBASE Active Optical Cable, 1m |
| --- |
| 1 |
| 4.28 |
| QSFP-H40G-AOC1M |
| 40GBASE Active Optical Cable, 1m |
| --- |
| 1 |
| 4.29 |
| S9400UK9-1715 |
| CAT9300/9400/9500/9600 UNIVERSAL |
| --- |
| 1 |
| 4.30 |
| CAB-US620P-C19-US |
| NEMA 6-20 to IEC-C19 13ft US |
| --- |
| 8 |
| 5.0 |
| C9200CX-12P-2X2G-A |
| Catalyst 9000 Compact Switch 12 port PoE+, 240W, Adv |
| --- |
| 2 |
| 5.0.1 |
| CON-SSSNT-C9200CXM |
| SOLN SUPP 8X5XNBD Catalyst 9000 Compact Switch 12 port PoE |
| 60 |
| 2 |
| 5.1 |
| C9200CX-NW-A-12 |
| C9200CX Network Advantage, 12-port license |
| --- |
| 2 |
| 5.2 |
| CAB-TA-NA |
| North America AC Type A Power Cable |
| --- |
| 2 |
| 5.3 |
| C9K-CMPCT-PWR-CLP |
| Power Retainer Clip for 9200CX Compact Switch |
| --- |
| 2 |
| 5.4 |
| NETWORK-PNP-NONE |
| Network Plug-n-Play Opt Out SKU |
| --- |
| 2 |
| 5.5 |
| C9K-WALL-TRAY |
| Wall Mount Bracket for 9200CX Compact Switch |
| --- |
| 2 |
| 5.6 |
| C9200CX-DNA-A-12 |
| C9200CX Cisco DNA Advantage, 12-Port Term Licenses |
| --- |
| 2 |
| 5.6.0.1 |
| CON-SSTCM-C9292CXD |
| SOLN SUPP SW SUB C9200CX Cisco DNA Advantage, 12-Port Ter |
| 60 |
| 2 |
| 5.6.1 |
| C9200CX-DNAA12-5Y |
| C9200CX Cisco DNA Advantage, 5Y Term License, 12P |
| 60 |
| 2 |
| 5.7 |
| SCAT9200CXUK9-1712 |
| Cisco Catalyst 9200CX XE 17.12 UNIVERSAL |
| --- |
| 2 |
| 6.0 |
| C9300-48H-A |
| Catalyst 9300 48-port UPoE+, Network Advantage |
| --- |
| 1 |
| 6.0.1 |
| CON-L1NCD-C930210K |
| CX LEVEL 1 8X7NCDCatalyst 9300 48port UPoE Network Adv |
| 60 |
| 1 |
| 6.1 |
| C9300-NW-A-48 |
| C9300 Network Advantage, 48-port license |
| --- |
| 1 |
| 6.2 |
| PWR-C1-715WAC-P |
| 715W AC 80+ platinum Config 1 Power Supply |
| --- |
| 1 |
| 6.3 |
| PWR-C1-715WAC-P/2 |
| 715W AC 80+ platinum Config 1 SecondaryPower Supply |
| --- |
| 1 |
| 6.4 |
| CAB-TA-NA |
| North America AC Type A Power Cable |
| --- |
| 2 |
| 6.5 |
| C9300-SSD-NONE |
| No SSD Card Selected |
| --- |
| 1 |
| 6.6 |
| C9300-STACK-NONE |
| No Stack Cable Selected |
| --- |
| 1 |
| 6.7 |
| C9300-SPWR-NONE |
| No Stack Power Cable Selected |
| --- |
| 1 |
| 6.8 |
| TE-C9K-SW |
| TE agent for IOSXE on C9K |
| --- |
| 1 |
| 6.9 |
| C9K-SMART-BUILDING |
| Smart Building Application Identifier |
| --- |
| 1 |
| 6.10 |
| C9K-ACC-RBFT |
| RUBBER FEET FOR TABLE TOP SETUP 9200 and 9300 |
| --- |
| 1 |
| 6.11 |
| C9K-ACC-SCR-4 |
| 12-24 and 10-32 SCREWS FOR RACK INSTALLATION, QTY 4 |
| --- |
| 1 |
| 6.12 |
| CAB-GUIDE-1RU |
| 1RU CABLE MANAGEMENT GUIDES 9200 and 9300 |
| --- |
| 1 |
| 6.13 |
| C9300-NM-8X |
| Catalyst 9300 8 x 10GE Network Module |
| --- |
| 1 |
| 6.14 |
| C9300-DNA-A-48 |
| C9300 DNA Advantage, 48-Port Term Licenses |
| --- |
| 1 |
| 6.14.0.1 |
| CON-L1SWT-C93A48 |
| CX LEVEL 1 SW SUB C9300 DNA Advantage |
| 60 |
| 1 |
| 6.14.1 |
| C9300-DNA-A-48-5Y |
| C9300 DNA Advantage, 48-Port, 5 Year Term License |
| 60 |
| 1 |
| 6.15 |
| D-DNAS-EXT-S-T |
| Cisco DNA Spaces Extend Term License for Catalyst Switches |
| --- |
| 1 |
| 6.15.1 |
| D-DNAS-EXT-S-5Y |
| Cisco DNA Spaces Extend for Catalyst Switching - 5Year |
| 60 |
| 1 |
| 6.16 |
| TE-EMBEDDED-T |
| Cisco ThousandEyes Enterprise Agent IBN Embedded |
| --- |
| 1 |
| 6.16.1 |
| TE-EMBEDDED-T-5Y |
| ThousandEyes - Enterprise Agents |
| 60 |
| 1 |
| 6.17 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 1 |
| 6.18 |
| SC9300UK9-1712 |
| Cisco Catalyst 9300 XE 17.12 UNIVERSAL |
| --- |
| 1 |
| 7.0 |
| C9200CX-8P-2X2G-A |
| Catalyst 9000 Compact Switch 8 port PoE+, 240W, Adv |
| --- |
| 1 |
| 7.0.1 |
| CON-SSSNT-C920CXYZ |
| SOLN SUPP 8X5XNBD Catalyst 9000 Compact Switch 8 port PoE+ |
| 60 |
| 1 |
| 7.1 |
| C9200CX-NW-A-8 |
| C9200CX Network Advantage, 8-port license |
| --- |
| 1 |
| 7.2 |
| CAB-TA-NA |
| North America AC Type A Power Cable |
| --- |
| 1 |
| 7.3 |
| SCAT9200CXUK9-179 |
| Cisco Catalyst 9200CX XE 17.9 UNIVERSAL |
| --- |
| 1 |
| 7.4 |
| NETWORK-PNP-NONE |
| Network Plug-n-Play Opt Out SKU |
| --- |
| 1 |
| 7.5 |
| C9200CX-DNA-A-8 |
| C9200CX Cisco DNA Advantage, 8-Port Term Licenses |
| --- |
| 1 |
| 7.5.0.1 |
| CON-SSTCM-C9201CCD |
| SOLN SUPP SW SUB C9200CX Cisco DNA Advantage, 8-Port Term |
| 60 |
| 1 |
| 7.5.1 |
| C9200CX-DNAA8-5Y |
| C9200CX Cisco DNA Advantage, 5Y Term License, 8P |
| 60 |
| 1 |
| 8.0 |
| CP-DX-CORD= |
| Spare Handset Cord for Cisco 8800, DX650 |
| --- |
| 10 |
| 9.0 |
| ICMPP24T2C |
| ICC 24 Port 8P2C Telco Patch Panel, Integrated with 1 male 50-pin telco connector |
| --- |
| 1 |
| 9.1 |
| ICPCSTFM10 |
| ICC RJ-21 Breakout Cable, Female to male, 50-pin Telco connectors, CAT 3 Telco cable |
| --- |
| 1 |
| 10.0 |
| IPTA-M3YR-A |
| InformaCast Advanced Notification Maintenance, Term 3 Year(s) |
| --- |
| 100 |
| 11.0 |
| SU3000LCD2UHV |
| Tripp Lite 208/240V 3000VA 2.7kW Double-Conversion UPS - 8 Outlets, Extended Run, Card Slot, LCD, USB, DB9, 2U |
| --- |
| 1 |
| 12.0 |
| Deployment Services |
| 1. Replace existing voice router by rack mounting/installing, setup/move configuration. Move FXS connections from VG310 to new voice router. |
2. Install and setup new Cisco UCS appliance. Migrate Existing System to 2 locations: 1) CUCM Publisher to be added Portland Cluster and 2) CUCM Subscriber, CUC Publisher and Subscriber to be installed in new appliance. Estimate 107 endpoints (phones and analog). Use/upgrade to current firmware and software versions. IHS to provide VMware licenses.
3. Install, setup and migrate Singlewire InformaCast to new server. Work with site to setup new onsite server (not on UCS appliance). IHS will provide the virtual server license.
4. Replace existing switches by rack mount/installing, setup/configure new switches.
5. Reconfigure System Call Handlers if needed. Work with departments to determine what they want.
6. Migrate fax services to centralized Portland Area XM Fax services. Work with site to determine which departments to move.
7. Add Variphy connectivity to Cisco CUCM for CDR Management and Phone Inventory.
8. Install and configure power supply.
Warm Springs Health and Wellness Center
| Line# |
| Part Number |
| Description |
| Serv |
Dur (Mos) Qty
| 1.0 |
| C8300-2N2S-6T-V |
| Cisco Catalyst C8300-2N2S-6T Router Voice Bundle, NIM-PVDM-6 |
| --- |
| 1 |
| 1.0.1 |
| CON-SNT-C83002N1 |
| SNTC-8X5XNBD Cisco Catalyst C8300-2N2S-6T Router Voic |
| 60 |
| 1 |
| 1.1 |
| MEM-C8300-32GB |
| Cisco Catalyst 8300 Edge 32GB memory |
| --- |
| 1 |
| 1.2 |
| M2USB-16G |
| Cisco Catalyst 8000 Edge M.2 USB 16GB |
| --- |
| 1 |
| 1.3 |
| C-RFID-2R |
| RFID - 2RU for Cisco 8200/8300 Series |
| --- |
| 1 |
| 1.4 |
| C8300-RM-19-2R |
| Cisco Catalyst 8300 Rack mount kit - 19" 2R |
| --- |
| 1 |
| 1.5 |
| C8300-PIM-BLANK |
| PIM Blank for Cisco 8300 Series |
| --- |
| 1 |
| 1.6 |
| C8300-FAN-2R |
| Cisco Catalyst 8300 Edge Fan Tray, 2RU |
| --- |
| 1 |
| 1.7 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 1 |
| 1.8 |
| PWR-CC1-1000WAC |
| Cisco C8300 2RU AC 1KW Power supply |
| --- |
| 2 |
| 1.9 |
| PWR-CC1-MOD-POE |
| Cisco Catalyst Edge POE Power Supply |
| --- |
| 2 |
| 1.10 |
| TE-R-SW |
| TE agent for IOSXE on Enterprise Routing |
| --- |
| 1 |
| 1.11 |
| C8000-HSEC |
| U.S. Export Restriction Compliance license for C8000 series |
| --- |
| 1 |
| 1.12 |
| SC8KBEUK9-1712 |
| UNIVERSAL |
| --- |
| 1 |
| 1.13 |
| IOSXE-AUTO-MODE |
| IOS XE Autonomous or SD-Routing mode for Unified image |
| --- |
| 1 |
| 1.14 |
| NIM-PVDM-64 |
| NIM with 64-channel DSP |
| --- |
| 1 |
| 1.15 |
| NIM-2MFT-T1/E1 |
| 2 port Multiflex Trunk Voice/Clear-channel Data T1/E1 Module |
| --- |
| 1 |
| 1.16 |
| PVDM4-128 |
| 128-channel DSP module |
| --- |
| 1 |
| 1.17 |
| NIM-2FXO |
| 2-port Network Interface Module - FXO (Universal) |
| --- |
| 1 |
| 1.18 |
| C-SM-NIM-ADPT |
| Cisco Catalyst SM to NIM Module Adaptor |
| --- |
| 1 |
| 1.19 |
| SM-X-24FXS/4FXO |
| Fixed Port High Density Analog Voice ServiceModule for ISR4K |
| --- |
| 1 |
| 1.20 |
| PWR-CC1-1000WAC-P |
| Cisco Catalyst Edge AC 1000WAC POE Power Supply |
| --- |
| 2 |
| 1.21 |
| CAB-C15-AC |
| AC Power Cord (North America), C15, NEMA-5-15P, 2.5m |
| --- |
| 2 |
| 1.22 |
| DNA-P-T0-A-5Y |
| Cisco DNA Advantage On-Prem Lic 5Y - upto 25M (Aggr, 50M) |
| --- |
| 1 |
Initial Term - 60.00 Months | Auto Renewal Term - 0 Months | Billing Model - Prepaid Term
| 1.23 |
| SVS-PDNA-ADV |
| Embedded Support for SW - Tiered DNA Advantage On-Prem |
| --- |
| 1 |
| 1.24 |
| DSTACK-T0-A |
| Cisco DNA Advantage Stack - upto 25M (Aggr, 50M) |
| --- |
| 1 |
| 1.25 |
| NWSTACK-T0-A |
| Cisco Network Advantage Stack - upto 25M (Aggr, 50M) |
| --- |
| 1 |
| 1.26 |
| TE-EMBED-WANI |
| Cisco ThousandEyes WAN Insights Embedded |
| --- |
| 1 |
| 1.27 |
| SDWAN-UMB-ADV |
| Cisco Umbrella for DNA Advantage |
| --- |
| 1 |
| 1.28 |
| DNAC-ONPREM-PF |
| Cisco DNA Center On Prem Deployment Option for WAN |
| --- |
| 1 |
| 1.29 |
| C83-2N2S-6T-PF |
| C8300-2N2S-6T Platform Selection for DNA Subscription |
| --- |
| 1 |
| 1.30 |
| IOSXE-AUTO-MODE-PF |
| IOS XE Autonomous or SD-Routing mode for Unified image |
| --- |
| 1 |
| 2.0 |
| BE7M-M6-K9 |
| Cisco Business Edition 7000M (M6) Appliance, Export Restr SW |
| --- |
| 1 |
| 2.0.1 |
| CON-OSP-BE7MGT6K |
| SNTC-24X7X4OS Cisco Business Edition 7000M (M6) Applia |
| 60 |
| 1 |
| 2.1 |
| BE7K-TPM-M6 |
| TPM 2.0, TCG, FIPS140-2, CC EAL4+ Certified, for M6 servers |
| --- |
| 1 |
| 2.2 |
| BE7K-PSU |
| Cisco UCS 1050W AC Power Supply for Rack Server |
| --- |
| 2 |
| 2.3 |
| BE7K-NIC-M6 |
| Cisco-Intel X710T4LG 4x10 GbE RJ45 PCIe NIC |
| --- |
| 1 |
| 2.4 |
| BE7K-NIC-M6 |
| Cisco-Intel X710T4LG 4x10 GbE RJ45 PCIe NIC |
| --- |
| 1 |
| 2.5 |
| BE7K-PCIERISER-M6 |
| C240 M6 Riser1A; (x8;x16x, x8); StBkt; (CPU1) |
| --- |
| 1 |
| 2.6 |
| BE7K-DISK-M6 |
| 600GB 12G SAS 10K RPM SFF HDD |
| --- |
| 16 |
| 2.7 |
| BE7K-RAIDCTRLR-M6 |
| Cisco M6 12G SAS RAID Controller with 4GB FBWC (28 Drives) |
| --- |
| 1 |
| 2.8 |
| BE7K-RAM-M6-M5 |
| 16GB RDIMM SRx4 3200 (8Gb) |
| --- |
| 6 |
| 2.9 |
| BE7M-CPU-M6 |
| Intel 6326 2.9GHz/185W 16C/24MB DDR4 3200MHz |
| --- |
| 1 |
| 2.10 |
| VIRT-LIC-NONE |
| ESXi lic NOT included; sold separately or customer-provided |
| --- |
| 1 |
| 2.11 |
| CAB-9K12A-NA |
| Power Cord, 125VAC 13A NEMA 5-15 Plug, North America |
| --- |
| 2 |
| 3.0 |
| C9410R-96U-BNDL-A |
| Catalyst 9400 Series 10 slot,1xSup, 2xLC, DNA-A LIC |
| --- |
| 2 |
| 3.0.1 |
| CON-SSSNT-C9410R9A |
| SOLN SUPP 8X5XNBD Catalyst 9400 Series 10 slot,Sup, 2xC940 |
| 60 |
| 2 |
| 3.1 |
| C9400-NW-A |
| Cisco Catalyst 9400 Network Advantage License |
| --- |
| 2 |
| 3.2 |
| TE-C9K-SW |
| TE agent for IOSXE on C9K |
| --- |
| 2 |
| 3.3 |
| C9400-PWR-3200AC |
| Cisco Catalyst 9400 Series 3200W AC Power Supply |
| --- |
| 16 |
| 3.4 |
| C9400-DNA-A |
| Cisco Catalyst 9400 DNA Advantage Term License |
| --- |
| 2 |
| 3.4.0.1 |
| CON-SSTCM-C94A |
| SOLN SUPP SW SUBCisco Catalyst 9400 |
| 60 |
| 2 |
| 3.4.1 |
| C9400-DNA-A-5Y |
| Cisco Catalyst 9400 DNA Advantage - 5 Year License |
| 60 |
| 2 |
| 3.5 |
| D-DNAS-EXT-S-T |
| Cisco DNA Spaces Extend Term License for Catalyst Switches |
| --- |
| 2 |
| 3.5.1 |
| D-DNAS-EXT-S-5Y |
| Cisco DNA Spaces Extend for Catalyst Switching - 5Year |
| 60 |
| 2 |
| 3.6 |
| TE-EMBEDDED-T |
| Cisco ThousandEyes Enterprise Agent IBN Embedded |
| --- |
| 2 |
| 3.6.1 |
| TE-EMBEDDED-T-5Y |
| ThousandEyes - Enterprise Agents |
| 60 |
| 2 |
| 3.7 |
| NETWORK-PNP-NONE |
| Network Plug-n-Play Opt Out SKU |
| --- |
| 2 |
| 3.8 |
| C9400-QSFP-CVR |
| QSFP port EMI and dust protection cover |
| --- |
| 8 |
| 3.9 |
| C9000-HSEC |
| U.S. Export Restriction Compliance license for Catalyst 9000 |
| --- |
| 2 |
| 3.10 |
| C9400X-SUP-2XL-B |
| Catalyst 9400 Series SUP2XL BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 2 |
| 3.11 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.12 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.13 |
| C9400X-SUP-2XL |
| Cisco Catalyst 9400 Series Supervisor 2XL Module |
| --- |
| 2 |
| 3.14 |
| C9400-LC-48HX-B |
| Catalyst 9400 2xC9400-LC-48HX BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 2 |
| 3.15 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.16 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.17 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.18 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.19 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.20 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 2 |
| 3.21 |
| S9400UK9-1712 |
| Cisco Catalyst 9400 XE 17.12 UNIVERSAL |
| --- |
| 2 |
| 3.22 |
| C9K-ACC-SCR-12 |
| 12-24 and 10-32 SCREWS FOR RACK INSTALLATION, QTY 12 |
| --- |
| 2 |
| 3.23 |
| CAB-CON-C9K-RJ45 |
| Console Cable 6ft with RJ-45-to-RJ-45 |
| --- |
| 2 |
| 3.24 |
| CAB-GUIDE-10R |
| 10-SLOT CHASSIS CABLE MANAGEMENT GUIDES for 9400 |
| --- |
| 2 |
| 3.25 |
| C9K-ACC-ADP-DB9 |
| ADAPTER FOR DB9F TO RJ45 for 9400 |
| --- |
| 2 |
| 3.26 |
| CAB-L620P-C19-US |
| NEMA L6-20 to IEC-C19 14ft US |
| --- |
| 16 |
| 3.27 |
| C9400-SSD-480GB |
| Cisco Catalyst 9400 Series 480GB M2 SATA memory (Supervisor) |
| --- |
| 2 |
| 3.28 |
| SFP-10/25G-CSR-S |
| Dual Rate 10/25GBASE-CSR SFP Module |
| --- |
| 2 |
| 3.29 |
| C9400-S-BLANK |
| Cisco Catalyst 9400 Series Slot Blank Cover |
| --- |
| 2 |
| 4.0 |
| C9300X-48TX-A |
| Catalyst 9300 48-port mGig data only, Network Advantage |
| --- |
| 2 |
| 4.0.1 |
| CON-L1NCD-C9300XZ4 |
| CX LEVEL 1 8X7NCD Catalyst 9300 48-port mGig data only, Ne |
| 60 |
| 2 |
| 4.1 |
| C9300-DNA-A-48 |
| C9300 DNA Advantage, 48-Port Term Licenses |
| --- |
| 2 |
| 4.1.0.1 |
| CON-L1SWT-C93A48 |
| CX LEVEL 1 SW SUB C9300 DNA Advantage |
| 60 |
| 2 |
| 4.1.1 |
| C9300-DNA-A-48-5Y |
| C9300 DNA Advantage, 48-Port, 5 Year Term License |
| 60 |
| 2 |
| 4.2 |
| TE-EMBEDDED-T |
| Cisco ThousandEyes Enterprise Agent IBN Embedded |
| --- |
| 2 |
| 4.2.1 |
| TE-EMBEDDED-T-5Y |
| ThousandEyes - Enterprise Agents |
| 60 |
| 2 |
| 4.3 |
| D-DNAS-EXT-S-T |
| Cisco DNA Spaces Extend Term License for Catalyst Switches |
| --- |
| 2 |
| 4.3.1 |
| D-DNAS-EXT-S-5Y |
| Cisco DNA Spaces Extend for Catalyst Switching - 5Year |
| 60 |
| 2 |
| 4.4 |
| C9300-NW-A-48 |
| C9300 Network Advantage, 48-port license |
| --- |
| 2 |
| 4.5 |
| SC9300UK9-1712 |
| Cisco Catalyst 9300 XE 17.12 UNIVERSAL |
| --- |
| 2 |
| 4.6 |
| PWR-C1-715WAC-P |
| 715W AC 80+ platinum Config 1 Power Supply |
| --- |
| 2 |
| 4.7 |
| PWR-C1-715WAC-P/2 |
| 715W AC 80+ platinum Config 1 SecondaryPower Supply |
| --- |
| 2 |
| 4.8 |
| CAB-TA-NA |
| North America AC Type A Power Cable |
| --- |
| 4 |
| 4.9 |
| C9300-SSD-NONE |
| No SSD Card Selected |
| --- |
| 2 |
| 4.10 |
| STACK-T1-50CM |
| 50CM Type 1 Stacking Cable |
| --- |
| 2 |
| 4.11 |
| CAB-SPWR-30CM |
| Catalyst Stack Power Cable 30 CM |
| --- |
| 2 |
| 4.12 |
| TE-C9K-SW |
| TE agent for IOSXE on C9K |
| --- |
| 2 |
| 4.13 |
| C9300X-NM-BLANK |
| Catalyst 9300 Network Module Blank Module |
| --- |
| 2 |
| 4.14 |
| C9K-ACC-RBFT |
| RUBBER FEET FOR TABLE TOP SETUP 9200 and 9300 |
| --- |
| 2 |
| 4.15 |
| C9K-ACC-SCR-4 |
| 12-24 and 10-32 SCREWS FOR RACK INSTALLATION, QTY 4 |
| --- |
| 2 |
| 4.16 |
| CAB-GUIDE-1RU |
| 1RU CABLE MANAGEMENT GUIDES 9200 and 9300 |
| --- |
| 2 |
| 4.17 |
| C9300X-NM-NONE |
| Catalyst 9300 No-Network Module Selection |
| --- |
| 2 |
| 4.18 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 2 |
| 4.19 |
| NETWORK-PNP-NONE |
| Network Plug-n-Play Opt Out SKU |
| --- |
| 2 |
| 5.0 |
| C9410R-96U-BNDL-A |
| Catalyst 9400 Series 10 slot,1xSup, 2xLC, DNA-A LIC |
| --- |
| 1 |
| 5.0.1 |
| CON-SSSNT-C9410R9A |
| SOLN SUPP 8X5XNBD Catalyst 9400 Series 10 slot,Sup, 2xC940 |
| 60 |
| 1 |
| 5.1 |
| C9400-NW-A |
| Cisco Catalyst 9400 Network Advantage License |
| --- |
| 2 |
| 5.2 |
| TE-C9K-SW |
| TE agent for IOSXE on C9K |
| --- |
| 1 |
| 5.3 |
| C9400-PWR-3200AC |
| Cisco Catalyst 9400 Series 3200W AC Power Supply |
| --- |
| 8 |
| 5.4 |
| C9400-DNA-A |
| Cisco Catalyst 9400 DNA Advantage Term License |
| --- |
| 1 |
| 5.4.0.1 |
| CON-SSTCM-C94A |
| SOLN SUPP SW SUBCisco Catalyst 9400 |
| 60 |
| 1 |
| 5.4.1 |
| C9400-DNA-A-5Y |
| Cisco Catalyst 9400 DNA Advantage - 5 Year License |
| 60 |
| 1 |
| 5.5 |
| D-DNAS-EXT-S-T |
| Cisco DNA Spaces Extend Term License for Catalyst Switches |
| --- |
| 1 |
| 5.5.1 |
| D-DNAS-EXT-S-5Y |
| Cisco DNA Spaces Extend for Catalyst Switching - 5Year |
| 60 |
| 1 |
| 5.6 |
| TE-EMBEDDED-T |
| Cisco ThousandEyes Enterprise Agent IBN Embedded |
| --- |
| 1 |
| 5.6.1 |
| TE-EMBEDDED-T-5Y |
| ThousandEyes - Enterprise Agents |
| 60 |
| 1 |
| 5.7 |
| NETWORK-PNP-NONE |
| Network Plug-n-Play Opt Out SKU |
| --- |
| 1 |
| 5.8 |
| C9400-QSFP-CVR |
| QSFP port EMI and dust protection cover |
| --- |
| 8 |
| 5.9 |
| C9000-HSEC |
| U.S. Export Restriction Compliance license for Catalyst 9000 |
| --- |
| 1 |
| 5.1 |
| C9400X-SUP-2XL-B |
| Catalyst 9400 Series SUP2XL BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 1 |
| 5.11 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 5.12 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 5.13 |
| C9400X-SUP-2XL |
| Cisco Catalyst 9400 Series Supervisor 2XL Module |
| --- |
| 1 |
| 5.14 |
| C9400-LC-48HX-B |
| Catalyst 9400 2xC9400-LC-48HX BUNDLE PID ONLY-NOT ACTUAL HW |
| --- |
| 1 |
| 5.15 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 5.16 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 5.17 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 5.18 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 5.19 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 5.2 |
| C9400-LC-48HX |
| Cisco Catalyst 9400 Series 48-Port UPOE+ 10G mGig |
| --- |
| 1 |
| 5.21 |
| S9400UK9-1712 |
| Cisco Catalyst 9400 XE 17.12 UNIVERSAL |
| --- |
| 1 |
| 5.22 |
| C9K-ACC-SCR-12 |
| 12-24 and 10-32 SCREWS FOR RACK INSTALLATION, QTY 12 |
| --- |
| 1 |
| 5.23 |
| CAB-CON-C9K-RJ45 |
| Console Cable 6ft with RJ-45-to-RJ-45 |
| --- |
| 1 |
| 5.24 |
| CAB-GUIDE-10R |
| 10-SLOT CHASSIS CABLE MANAGEMENT GUIDES for 9400 |
| --- |
| 1 |
| 5.25 |
| C9K-ACC-ADP-DB9 |
| ADAPTER FOR DB9F TO RJ45 for 9400 |
| --- |
| 1 |
| 5.26 |
| CAB-L620P-C19-US |
| NEMA L6-20 to IEC-C19 14ft US |
| --- |
| 8 |
| 5.27 |
| C9400-SSD-480GB |
| Cisco Catalyst 9400 Series 480GB M2 SATA memory (Supervisor) |
| --- |
| 1 |
| 5.28 |
| SFP-10/25G-CSR-S |
| Dual Rate 10/25GBASE-CSR SFP Module |
| --- |
| 1 |
| 5.29 |
| C9400X-SUP-2XL/2 |
| Cisco Catalyst 9400 Series Redundant Supervisor 2XL Module |
| --- |
| 1 |
| 5.3 |
| C9400-SSD-480GB |
| Cisco Catalyst 9400 Series 480GB M2 SATA memory (Supervisor) |
| --- |
| 1 |
| 5.31 |
| SFP-10/25G-CSR-S |
| Dual Rate 10/25GBASE-CSR SFP Module |
| --- |
| 1 |
| 6.0 |
| VG400-6FXS/6FXO |
| Cisco VG400 Analog Voice Gateway |
| --- |
| 1 |
| 6.0.1 |
| CON-SNT-VG4006FO |
| SNTC-8X5XNBD Cisco VG400 Analog Voice Gateway |
| 60 |
| 1 |
| 6.1 |
| SL-VG400-UC-K9 |
| Unified Communication License for VG400 Series |
| --- |
| 1 |
| 6.2 |
| CAB-AC |
| AC Power Cord (North America), C13, NEMA 5-15P, 2.1m |
| --- |
| 1 |
| 6.3 |
| PWR-VG400-AC |
| AC Power Supply for Cisco VG400 |
| --- |
| 1 |
| 6.4 |
| ACS-1100-RM-19 |
| Cisco 1100 Series Router Rackmount Wallmount Kit |
| --- |
| 1 |
| 6.5 |
| SVG400UK9-179 |
| Cisco VG400 Series IOS XE Universal Image |
| --- |
| 1 |
| 7.0 |
| C9300X-48HX-A |
| Catalyst 9300 48-port mGig UPoE+, Network Advantage |
| --- |
| 1 |
| 7.0.1 |
| CON-SNT-C9300XY4 |
| SNTC-8X5XNBD Catalyst 9300 48-port mGig UPoE+, Networ |
| 60 |
| 1 |
| 7.1 |
| C9300-DNA-A-48 |
| C9300 DNA Advantage, 48-Port Term Licenses |
| --- |
| 1 |
| 7.1.1 |
| C9300-DNA-A-48-5Y |
| C9300 DNA Advantage, 48-Port, 5 Year Term License |
| 60 |
| 1 |
| 7.2 |
| TE-EMBEDDED-T |
| Cisco ThousandEyes Enterprise Agent IBN Embedded |
| --- |
| 1 |
| 7.2.1 |
| TE-EMBEDDED-T-5Y |
| ThousandEyes - Enterprise Agents |
| 60 |
| 1 |
| 7.3 |
| D-DNAS-EXT-S-T |
| Cisco DNA Spaces Extend Term License for Catalyst Switches |
| --- |
| 1 |
| 7.3.1 |
| D-DNAS-EXT-S-5Y |
| Cisco DNA Spaces Extend for Catalyst Switching - 5Year |
| 60 |
| 1 |
| 7.4 |
| C9300-NW-A-48 |
| C9300 Network Advantage, 48-port license |
| --- |
| 1 |
| 7.5 |
| SC9300UK9-1713 |
| Cisco Catalyst 9300 XE 17.13 UNIVERSAL |
| --- |
| 1 |
| 7.6 |
| PWR-C1-715WAC-P |
| 715W AC 80+ platinum Config 1 Power Supply |
| --- |
| 1 |
| 7.7 |
| PWR-C1-715WAC-P/2 |
| 715W AC 80+ platinum Config 1 SecondaryPower Supply |
| --- |
| 1 |
| 7.8 |
| CAB-TA-NA |
| North America AC Type A Power Cable |
| --- |
| 2 |
| 7.9 |
| SSD-240G |
| Cisco pluggable USB3.0 SSD storage |
| --- |
| 1 |
| 7.1 |
| STACK-T1-50CM |
| 50CM Type 1 Stacking Cable |
| --- |
| 1 |
| 7.11 |
| C9300-SPWR-NONE |
| No Stack Power Cable Selected |
| --- |
| 1 |
| 7.12 |
| TE-C9K-SW |
| TE agent for IOSXE on C9K |
| --- |
| 1 |
| 7.13 |
| C9000-HSEC |
| U.S. Export Restriction Compliance license for Catalyst 9000 |
| --- |
| 1 |
| 7.14 |
| C9K-ACC-RBFT |
| RUBBER FEET FOR TABLE TOP SETUP 9200 and 9300 |
| --- |
| 1 |
| 7.15 |
| C9K-ACC-SCR-4 |
| 12-24 and 10-32 SCREWS FOR RACK INSTALLATION, QTY 4 |
| --- |
| 1 |
| 7.16 |
| CAB-GUIDE-1RU |
| 1RU CABLE MANAGEMENT GUIDES 9200 and 9300 |
| --- |
| 1 |
| 7.17 |
| C9300X-NM-8Y |
| Catalyst 9300 8 x 10G/25G Network Module SFP+/SFP28 |
| --- |
| 1 |
| 7.18 |
| SFP-10/25G-CSR-S |
| Dual Rate 10/25GBASE-CSR SFP Module |
| --- |
| 2 |
| 7.19 |
| NETWORK-PNP-LIC |
| Network Plug-n-Play Connect for zero-touch device deployment |
| --- |
| 1 |
| 8.0 |
| VG400-4FXS/4FXO |
| Cisco VG400 Analog Voice Gateway |
| --- |
| 1 |
| 8.0.1 |
| CON-SNT-VG4004FO |
| SNTC-8X5XNBD Cisco VG400 Analog Voice Gateway |
| 12 |
| 1 |
| 8.1 |
| SL-VG400-UC-K9 |
| Unified Communication License for VG400 Series |
| --- |
| 1 |
| 8.2 |
| CAB-AC |
| AC Power Cord (North America), C13, NEMA 5-15P, 2.1m |
| --- |
| 1 |
| 8.3 |
| PWR-VG400-AC |
| AC Power Supply for Cisco VG400 |
| --- |
| 1 |
| 8.4 |
| SVG400UK9-179 |
| Cisco VG400 Series IOS XE Universal Image |
| --- |
| 1 |
| 9.0 |
| DP-9851-K9= |
| Cisco Desk Phone 9851, Carbon Black |
| --- |
| 200 |
| 9.0.1 |
| CON-SNBD-DP9851K9 |
| SHIP NEXT BUS DAYCisco Desk Phone 9851 Carbon Black |
| 60 |
| 200 |
| 10.0 |
| DP-9800-KEM= |
| Cisco Desk Phone 9800 Key Expansion Module, Carbon Black |
| --- |
| 4 |
| 10.0.1 |
| CON-SNT-DP9KE8MA |
| SNTC-8X5XNBD Cisco Desk Phone 9800 Key Expansion Modu |
| 60 |
| 4 |
| 11.0 |
| DP-9800-WMK= |
| Cisco Desk Phone 9800 Wall Mount Kit |
| --- |
| 4 |
| 12.0 |
| CP-HS-W-531-RJ= |
| Headset 531 Wired Single + QD RJ Headset Cable |
| --- |
| 20 |
| 12.0.1 |
| CON-SNT-PHBRJWB7 |
| Headset 531 Wired Single + QD RJ Headset CableSNTC-8X5XNBD |
| 12 |
| 20 |
| 13.0 |
| CP-HS-WL-561-S-US= |
| 561 Wireless Single Headset, Standard Base Station US,CA |
| --- |
| 20 |
| 13.0.1 |
| CON-SNBD-PHQUSWQ6 |
| SHIP NEXT BUS DAY561 Wireless Single Headset Standard Ba |
| 12 |
| 20 |
This is the start of the file's text. The full file is on GovTribe.
