Draft Statement of Work Bird Deterrence.pdf

(DRAFT)

STATEMENT OF WORK

Support Services: Bird Deterrence

1. Purpose

The purpose of this requirement is to remove bird’s ability to easily seek refuge within an actively used aircraft hanger.

2. Scope the scope of this work is one 80,500 square foot aircraft hanger.

3. Period and Place of Performance Marine Corps Air Field, Marine Corps Base Quantico, Hanger 2134, Period of Performance will be 1-30 September, 2022.

4. Background Provide pesticides, labor, material and equipment necessary to apply bird deterrent for HMX-1 Hangar 2134. This work will include repairing existing bird netting, installation additional bird netting (See exhibit 1, Photo 1), installation of bird deterrent along various surfaces and professional cleaning of the floors and walls in the Hangar. This work will take place throughout the entire Hangar (80,500 square feet) space. These additional measures will help prevent European Starlings and Pigeons from entering the Hangar. A 60ft aerial lift or equivalent type of equipment will be need to complete this scope of work.

The government will issue a Firm Fixed Price Order. As such, additional/unexpected work is not authorized.

The contractor shall provide a list of personnel who will be performing the work in order to gain proper security clearance prior to award of the contract.

5. Performance Objectives/Required Results

5.1 PROVIDE SUPPORT SERVICES: Bird Deterrence

5.1.1 Provide and install 21,000ft (exhibit 1 photo 1) of new knotless fire retardant bird netting with hammer on beam claps and clips and or equivalent bird deterrent on the south and north end of the Hangar over the exposed steel truss and conduit for protection from nesting and debris.

5.1.2 A site visit will be available from 12:00 on 12 July 2022 through 12:00 on 19 July 2022. The contractors shall identify what additional sections of exsisting netting require replacement during the recommended site visit, and submit this information within their quote.

5.1.3 Repair existing ¾” knotless fire retardant bird netting throughout the Hangar where Starlings and Pigeons have damaged the netting. There shall be no remaining access points for birds to get into the netting upon completion of the work. (80,500 square feet, exhibit 1 photo 2).

5.1.4 Repair ¾” knotless fire retardant bird netting around electrical conduitt for 112 high bay light fixtures on the two closest rows to the hangar doors.

5.1.5 Provide and install 900ft. of new 2 ft. long stainless steel 5 prong repelling bird spikes with snap off sections and/or equivalent bird deterrent to cover the 8” area of steel beam on the top of the Hangar doors that are 30ft. long each (Exhibit 1 photo 3).

5.1.6 Prepare floors, walls, light fixtures and other various equipment by wetting down bird feces prior to cleaning to eliminate an air born particulates. Customer will remove all aircraft and equipment that shall not be cleaned prior to execution of the phase. Customer will identify ahead of time, any fixed equipment that cannot get wet; that equipment shall be covered by the contractor.

5.1.7 Thoroughly clean floors (exhibit 1 photo 1, 3, 4 and 5), walls, doors, light fixtures (exhibit 1 photo 6) and other fixed equipment with a clean detergent to remove and disinfect the bird feces from the hangar area (80,500 square feet).

5.1.8 The Contractor shall conduct work in a phased approach, allowing government continued use of no less than ¾ of the space. Government will remove aircraft and equipment from the ¼ of the hangar being executed during each phase.

(End of Statement of Work)