DRAFT_Standard_Drawings_-_Bear_River_Fence_Construction_1.pdf

STRESS PANEL

s•-s"M;n

--r

END PANEL

L

\I

Add additional wire of the some material as bottom wire of fence ond o rock deodmon (min. weight 50 lbs.) when space between bottom wire and ground exceed 20 inches.

'\ w Steel line post

PANEL AT MINOR DEPRESSION

NOTE:

1 . See specifications for the following:

o. Ratio of steel to wood line posts.

b. Post spacing, length and depth in ground.

c. Type of end panel to bo,- used.

d. Type of wire to be used.

e. Spacing between wires.

f. Number of stays per span (L).

LINE PANELS

Al\JAYS THINK SAFETY

UNITED STATES DEPARTMENT OF THE INTERIOR

BUREAU OF LAND MANAGEMENT

DIVISION OF TECHNICAL SERVICES ' SERVICE CENTER

lYPICAL

BARBED WIRE FENCE

( 4-WIRE)

DESIGNED

REVIEWED

APPROVED

DRAWN

others

OF

6'-6" Min.

I I I I I I I I

16.5'

5.5'

18"

8.25'

12" 6" 6"

16"

12" 6" 6"

16"

9'

3'

DRAFT

tduncan Typewritten Text Steel post

S' Min.

_J_

NOTES:

Panel 16'-6_ c.c.

stays evenly spaced

WIRE GATE

TYPE A

Smooth wire loop or steel strop (see specifications for gouge)

UNITED STATES DEPARTMENT OF THE INTERIOR

BUREAU OF LAND MANAGEMENT

DIVISION OF TECHNICAL SERVICES SERVICE CENTER

1. The opening end of gate shall be provided with smooth wire loop at bottom of end stay as is common practice for fastening wire gap gates or as modified for gates with mechanical gate closers.

TYPICAL

WIRE GATE

2. Construct an end or stress panel on each side of type required in the specifications.

ALIJAYS THINK SAFETY

DESIGNED --'--...;;;.;,;..==---�----..,c.....-----

REVIEWED -���������---

APPROVED��r.1'!11�..45ra:��ia;i�-----

DRAWN:

OF

02834-6

9'

3'

DRAFT

tduncan Typewritten Text End panels shall be Steel posts per detail tduncan Typewritten Text End Panels shall be steel posts per detail

End of standard fence and beginning of fence-drainage crossing

Additional barbwire

Fence type as specified

2 strands (min.) of 9-gouge galv. wire

Wire design and spacing some as main fence, except as required end post shall be 7' -0" set 2'-6" deep.

lb.)

16'-6" C. C. max.

Or bank to bank width

NOTE:

1 . Staple wire on downstream side of channel posts.

AL\r/AYS THINK SAFETY

16'-6" C. C. max.

UNITED STATES DEPARTMENT OF THE INTERIOR

BUREAU OF - LAND MANAGEMENT

DIVISION OF TECHNICAL SERVICES SERVICE CENTER

FENCE-DRAINAGE CROSSING

TYPE-A

DESIGNED

REVIEWED

APPROVED ...J�t/ZAll!l!IJt......m.:rz:t3il:li-'-��----

DRAWN

DATE AUGUST 7, 1990 OF

DRAWING NO. 02836-1

DRAFT

tduncan Typewritten Text Steel posts typical tduncan Typewritten Text Steel posts typical

18" from top of post tobrace pole.

Brace Pole notched and welded

8' Brace Pole

Brace Post 9' total length 3' in the ground

DRAFT

thowell Pencil thowell Line thowell Line thowell Line thowell Line tduncan Text Box 18" from top of post to cross brace. Cross brace shall be coped and welded in place. Typical for stress panel and corner panels.

tduncan Text Box 8' cross brace tduncan Text Box Steel post. 9' total length buried 3' in the ground tduncan Text Box Tension wire tduncan Text Box welded loop to hold tension wire tduncan Text Box Note: This fence image does not show the correct wire spacing or the correct quantity of wires.

-DRAFT

tduncan Text Box Typical stress brace with Steel posts and welded cross brace Posts are 9' long with 3' buried. Cross brace is 8' long coped and welded to posts.

tduncan

Note: This fence image does not show the correct wire spacing or the correct quantity of wires.

Loop for wire

DRAFT

thowell Oval tduncan Text Box Welded Loop for tension wire tduncan Cross-Out tduncan Text Box Wire clips securing wire to post tduncan Text Box Note: This fence image does not show the correct wire spacing or the correct quantity of wires.

tduncan

Tension Wire i i-, ► u+

DRAFT

tduncan

Typical Mechanical Gate Latch/closure

Blank Page