DRAFT SOW.pdf
PDF 211 KB Posted
- Attached to
- MS24 VLS Paint & Marking Federal contract opportunity
- Solicitation number
- N6426723Q0319
About this file
This statement of work outlines painting and marking requirements for equipment supporting the Vertical Launching System Aegis Modernization project. The Naval Surface Warfare Center, Corona Division requires a vendor within a 25-mile radius to mask, media blast, prime, paint, and mark equipment per technical drawings over a one-year base period and one-year option period. Deliverables include single module junction boxes, covers, brackets, platforms, and other components. The vendor must provide two-week turnaround, safety wrapping, and palletizing for delivery to the NSWC Corona facility. Additional period of performance, place of performance, shipping, inspection, acceptance, and technical contact details are to be determined. This supports the pre-solicitation opportunity for MS24 VLS Paint and Marking issued by the Department of the Navy Naval Sea Systems Command.
View the file
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
DR
AF
T
STATEMENT OF WORK
MS24 VLS Paint & Marking
1. INTRODUCTION
The Naval Surface Warfare Center (NSWC), Corona Division, Measurement Science and Engineering Department, Code MS24 the Precision Machining and Tooling section requires a vendor for painting and marking of equipment we fabricate in support of the Vertical Launching System (VLS) AEGIS Modernization (AMOD) project. The contract will be for one base year plus one (1) option year. The table on page 2 shows the quantities required for the base year and option year.
2. BACKGROUND
The Naval Surface Warfare facility at Corona has a production requirement that must be met to support the VLS AMOD project.
3. REQUIREMENTS
Quoted prices include masking, media blasting, priming and painting per drawing specifications (IAW WS19201), and marking per drawings specifications (IAW 19185) Pick-up and delivery to NSWC Corona 92860 must be included Vendor must be located within a 25 mile radius of NSWC Corona 92860, so that we can easily inspect items prior to delivery Two-week turnaround, unless otherwise approved by Corona ahead of time Safety wrapping and palletizing to preclude any transportation damage See table next page
T
VLS DWG/
Part Number Description
FY24
Qty
FY25
Qty
8407426 9 Single Module Junction Box (SMJB) 24 36 8407430 9 SMJB Cover 24 36 5597801 9 AIP Bracket 24 36 5597802 2 AIP Support 24 36 8407425 9 F.O. Platform 4 6 5599897 9 PS Bracket 4 6 5599898 9 PS Support 4 6
8407431 9 FODB B/L VII 4 6
8407430 19 FODB B/L VII Cover 4 6 7571816 1 Connector Shelf, 1 4 6 7571816 2 Connector Shelf, 2 4 6 7101710 19 Cable Spooling Device (CSD 19) 4 6 8407432 1 CSD 19 Spacer 4 6 7104617 9 Deluge A Side 24 36 7104618 9 Deluge B Side 24 36 7104616 1 Deluge Mounting Bracket 200 300 5599900 1 Walkway Angle 4 6
T
ADDITIONAL INFORMATION
A. PERIOD OF PERFORMANCE / REQUIRED DELIVERY DATES
B. PLACE OF PERFORMANCE
C. SHIPPING ADDRESS
D. INSPECTION AND ACCEPTANCE
E. TECHNICAL POINT OF CONTACT
TBD
TBD
TBD, Norco CA 92860
TBD
TBD
File details come from the government source that posted it. Updated .