DRAFT Scope.docx
DOCX document 20 KB Posted
- Solicitation number
- W912HQ26S0047
About this file
This is a Performance Work Statement for the design, fabrication, and installation of safety roll bars on 13 INTAC Off-Road/Unimproved Road Training Fleet vehicles. The vehicles are Model Year 2026/2027 Toyota Tacoma TRD Off Road 4X4 Double Cab trucks with 8-speed automatic transmissions. The roll bars must be constructed from 2" x 0.120" DOM steel tubing and 6 x 3/16 flat bar steel, painted black, and designed specifically for structural safety in rollover events rather than aesthetic purposes.
Contractor responsibilities include designing the roll bars based on vehicle specifications, fabricating and manufacturing the components, and installing them with direct mounting to the chassis frame through truck bed penetration. Installation requirements include welded support pads on frame rails, X bracing within the main hoop, rear support bars extending into the mid-bed area, complete painting of roll bars and welded areas, and sealing all penetration points with silicone or equivalent material. The contractor must also provide safe transport of vehicles between their facility and the Summit Point Training Facility in Summit Point, West Virginia. This is being procured as a Firm Fixed Price contract below the simplified acquisition threshold by the U.S. Army Corps of Engineers Mission Support Battalion, with interested vendors holding NAICS code 811114 (Specialized Automotive Repair) encouraged to submit capability packages demonstrating experience with this scope of work.
View the file
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
PERFORMANCE WORK STATEMENT
INTAC OR/UR Training Vehicle Fleet Safety Roll Bars
The Contractor shall provide the required workspace, all technical equipment and tools, software, equipment, supplies, materials, etc. required to Design, Fabricate/Manufacture/Construct, and Install Motor Vehicle safety Roll Bars for Thirteen (13) INTAC Off-Road / Unimproved Road Training Fleet Vehicles as described below.
INTAC Off-Road / Unimproved Road Training Fleet Description: Model Year 2026/2027 - 7544 - TACOMA TRD Off Road 4X4 Double Cab - 8AT - 8 Speed Automatic Transmission At a minimum, the Roll Bars shall be constructed of the following materials:
a) 2" x 0.120" DOM Steel tubing
b) 6 x 3/16 flat bar steel
c) PAINT TEXT BLACK Contractor efforts shall include but not be limited to:
Design the Roll Bars based upon the respective Vehicle Type and Construction Fabricate / Manufacture / Construct the Roll Bars Install roll bars including:
| - | Penetrate the truck bed to mount roll bar directly to the chassis frame. |
| - | Welded to support pads on frame rail |
| - | X bracing within the main hoop |
| - | Rear support bars extending into the mid-bed area. |
| - | Paint roll bar and all welded areas. |
| - | Seal all areas at the points of truck bed penetration and inserted Roll Bar extremities about the vehicle truck bed with a pliable silicon or like material, etc. |
The Contractor shall be responsible for providing safe transport of the vehicles as applicable between their facility and the Summit Point Training Facility, Summit Point, WV.
NOTE: Mounting the roll bar to the truck bed does not provide a safe mounting base and will likely fail in the event of a rollover. While there are similar-looking products on the market, those are generally designed for aesthetic purposes or for mounting light bars above the cab rather than for structural safety.
CUI
File details come from the government source that posted it. Updated .