Draft Requirement - MATOC Construction Fort Gordon.pdf

MATOC FOR MINOR CONSTRUCTION, REPAIR AND ALTERATION

– FORT GORDON, GA

DRAFT REQUIREMENTS DOCUMENT

This Multiple Award Task Order Contract (MATOC) is an Indefinite Delivery/Indefinite

Quantity (ID/IQ) contract for a broad range of maintenance, repair, and alteration projects.

Inclusive are new construction, rehabilitation, maintenance or repair which may include incidental design services. Both Design-Bid-Build (from here on referenced as construction) and

Design-Build (design and construction) type projects may be performed under this contract.

Design-Bid-Build (Construction) is defined as the traditional delivery method for construction projects where design and construction are sequential and contracted for separately with two contracts and two contractors. The drawings and specifications created under an initial

Architect/Engineer contract are used as the bid documents in the following construction contract.

Whereas, Design-Build combines the architectural, engineering, and construction services required for a project into a single contractual agreement. Under such an agreement, the

Government contracts with a single entity; the contractor providing the end product is responsible for both design and construction.

The period of performance is for a 5-year ordering period.

Performance and Payment Bonds will be required.

Bids or proposals to complete an individual project will be requested by issuance of a Request for Proposal (RFP). Resulting awards will be issued as Task Order’s (TOs). The TOs will vary in size ranging from $2,000.00 to approximately $5,000,000.00 with most anticipated to be between $25,000.00 and $3,000,000.00. (Subject to change – for final numbers see the Official

Solicitation when it is posted to Beta Sam)

The Contractor shall have an office located within 150 mile radius to Fort Gordon, Georgia.

All work will be performed on real property located in facilities assigned to Fort Gordon, Augusta, GA and Lake Thurmond, Leah, GA.

Projects will require in the use of a wide variety of trades such as carpentry, roofing, excavation, interior work (to include remodeling and interior modifications), electrical work, steam fittings, plumbing, sheet metal, painting, demolition, concrete masonry, welding, mechanical, landscaping, and other general construction work.

Scopes of Work may include, but not be limited to:

1.1 Vertical Construction

Buildings: New construction, rehabilitation, renovation and repair of buildings, building additions, pre-engineered buildings and other structures (e.g. open bay pre-engineered, storage facilities, training ranges, etc.). Building renovations to include: floors, ceilings, walls, windows, doors, painting, electrical & mechanical upgrades, etc…, furniture incidental to construction (e.g.

workstations), lead, asbestos and mold remediation, interior and/or exterior painting of new and existing facilities, and work incidental to surface deterioration (e.g. patching drywall, replacing siding, trim work, etc). Design and construction of the following types of facilities or their equivalent or similar commercial or institutional types may include but not be limited to:

Medical Facilities, Company Operational Facilities, Administrative & Office Buildings, Educational Facilities, Military Training Facilities, Weapons Training Facilities (Shoot-houses), Animal Training & Storage Facilities, Religious Facilities, Recreational & Storage Facilities, Dining Facilities, Vehicle Maintenance Facilities, Aircraft Storage Facilities, Hangars etc.

Roofs: Replacement and repair of roof and roofing systems. Work will include gutters, downspouts, flashing, fascia and soffits. Incidental damage (e.g. ceiling replacement, painting and carpet cleaning) as a result of roof leaks.

Anti-Terrorism Force Protection of new and existing facilities: Building and site security for both new and retrofit construction (e.g. site layout, security design, building construction, security equipment, threat development, level of protection, and design constraints and communications).

1.2 Horizontal Construction

New construction, rehabilitation and repairs of highways, roads, streets, airport runways, concrete aprons, sidewalks, storm drainage, landscaping, sodding, detection loops, bridges, parking lots, traffic lines and traffic markings. Work can also include the following, but not be limited to: Site preparation, clearing & grubbing, surveying, fencing, drainage systems, traffic & signalization and traffic studies. Storm water management and erosion control.

1.3 Mechanical Work

New construction, rehabilitation, maintenance or repair of HVAC systems, plumbing systems, waste water drainage systems, fire alarm, fire protection sprinkler systems, fire suppression systems, backflow preventers, all devices, equipment and components associated with constructing and installing these systems. Work can also include, but not be limited to the following: Installation of and experience with fire detection systems, Storage Tanks, DDC

Controls systems, underground high temperature lines, medium temperature lines, chill water distribution systems, variable frequency controls on HVAC systems, testing, adjusting, and balancing of HVAC systems, design and installation of computer room HVAC systems, commissioning of building systems and pumping systems.

1.4 Electrical Work

New construction, rehabilitation, maintenance or repair of interior and exterior utility systems and lines. Work may include but not be limited to the following: New construction, rehabilitation or repair services including electrical work. Interior and exterior high and low voltage electrical lines, communication lines, (telephone & data lines), communication systems, security & security camera systems and cabling. Natural gas, water, storm sewer, sanitary sewer and propane gas lines. Design, installation, and testing of new and existing emergency generator systems, automatic transfer switches, and emergency power connections into existing electrical systems.

1.5 Incidental Work

New construction, renovation, rehabilitation repair or demolition services incidental to the tasks performed in any of the above paragraphs. This work shall include, but is not be limited to:

Carpentry, painting, lighting, and similar minor electrical work that may be required to provide a complete, safe and usable facility during and after the course of roofing, mechanical, plumbing or painting services. Testing, reports and surveys associated with new construction, renovation, rehabilitation of, repairs and additions to, buildings (including lead and asbestos), structures, roads (including traffic/pedestrian patterns), drainage systems, mechanical systems and utility systems.

1.6 Restrictions

Task orders for design only or demolition only shall not be placed against the contract.